UPDTAE. If you take a glance at the comments section here you'll quickly see mixed results. Some people have had full access to this for ages, some are like myself where its a recant thing and some still cannot access this. SPECULATION MODE: Having chatted with some people in the comments here's what I think MAY be happening. Resolves UI has always been semi-automated, only allowing you a certain amount of control over the panels etc. and has always scaled itself in a certain way based on the hardware it detects and (new to me) it seems to also be affected by windows scaling. When I first opened 18.1 I noticed right away it was scaling differently. Everything was smaller and less bulky which I was glade of because it was utilizing my monitors real-estate much better than before. I believe this feature is a bit of a lottery and there seems to be a tipping point with how resolves UI scales based on your set up. When you cross this tipping point, you gain access to it. I believe that what ever the combination is of how 18.1 decided to scale the UI for my hardware finally crossed that tipping point and therefore I've gotten access to it and seemed like a "new" feature when really its simply new to ME. Anywho, please keep letting me know your experience with this and perhaps let me know your screen size and resolution as it appears as larger / higher res have more success with this. I'd like to see if a pattern emerges. I myself am on a UHD - 27 inch monitor.
windows scaling definitely has an impact, when i had my 1440p monitor scaled to 125% i got no dual view button but when windows scaling is turned off the dual viewer appears. but that means having to to work with text so tiny it's hard to read at a glance. really baffling decision on blackmagic's part to insist they know better than you what UI elements you want access to based on your screen setup
Thank you, you video helped me get rid of unwanted dual window, hope Davinci resolve developers make these things more user friendly and dont over engineer user interface.
I think its based on the hardware detection along with the size of your display and resolution. I have two 1440p 27' monitors and one 1080p 24' , when I drag to the 1080p an close and relaunch it would not have the button most of the time. but the specs of my pc would allow it sometimes. has to do with the code of the veiw display not having enough space to display the other view option until this update to fix for alot of people with optimization.
Resolve 14 (2017) had the "feature", maybe even earlier versions, you just need a higher resolution display or shrink down the media and/or inspector tabs.
Well I’ve had a UHD monitor for about 5 years now so what’s high resolution these days 😂 I was researching the forums before posting this and there was people unable to do it in resolve 17 with screen shots of the UI. That said you’re totally right about different people having different UI options based on hardware specs. Would it be fair to say this iteration of the feature is new, in the sense that you now decide on how it behaves rather than resolve deciding based on your hardware?
@@FilmResolved yes, its fair :) Windows DPI scaling also plays a role in the layout of Resolve, from what i can tell from your videos I think you are on 150% UI scaling, I use mine at 100% (43" UHD) to get more stuff on the screen larger and taller timeline. For me it just defaults to dual viewer. Might have come off a little rude at first, was not my intention, I`m just an old video editing nerd with ocd answering the question in the thumbnail :) Love your stuff, keep being awesome! ;)
Not at all you haven’t come across rude. Good point raised there about windows dpi. Resolve 18.1 is definitely scaling differently over all for me. In the past the bulkiness seems excessive for how high res my monitor is. Now it’s using the space much more efficiently. For example how many node I can see clearly in the color page is far more now. Over all I’m very happy with the UI now as we are already are so limited in its customisation.
I have Da vinci 18.1 and when i display the inspector window the dual viewer dissapears. What can i do to fix this? Do i need to update to a new version or maybe activate something in the workspace window?
When I maximize the window I lose it, when I size the window it comes back! you would think it would be the other way around? Thanks for pinned comment
IF THIS IS MISSING FOR YOU - Look for the "INSPECTOR" Tab with the brush and wrench on the right beside "Metadata" Click on it and it does the same thing!
It's quite odd, because on my iMac I get exactly what you have in this video but on my MacBook Pro MAx, nah - I can only have one viewer open when the inspector is on. I am on 18.6 🤷♂
Does anyone know how to remove the scroll bar at the bottom of the preview window? Its getting REALLY old everytime I click to stretch an overlay or image, I end up scrolling somewhere deep into the video and then have to find where I left off. Its very frustrating, I dont know when this happen but scroll bars were a basic feature to show or hide, from AutoCAD to every veriosn of Excel or Word I use. Thanks
l landed on your video looking for a solution to the problem you used to have (either 'double preview' or 'inspector menu'). Unfortunately, the solution you provide does not work for me. The moment l click on 'inspector' the 2nd preview window disappears. l'll keep looking for a solution as this truly slows my editing down. Having to constantly switch between 'inspector' and 'double windows' is so annoying. Thanks for the video anyway! (Samsung lc43j890dkuxen).
Thanks for this video, but I can't find a solution to my problem, hopefully you can help. My viewer is only playing videos from my timeline and not playing anything from the media pool. Previously, when I hovered over the videos on the media pool, it would automatically switch and start playing them. Is there a setting I need to change? Thanks in advance.
Is this like a WIndows Only feature? I'm using Davinci 18.6 with an ultrawide monitor, so space is definitely not the issue. This doesn't work for me. I still have to turn off the inspector to get the dual viewer mode.
Okay, I think I solved it. In order for this feature to work, the height of the resolution has to be at least 1440. If you drop it down, the feature disappears even if you have an ultra wide monitor.
IF THIS IS MISSING FOR YOU - Look for the "INSPECTOR" Tab with the brush and wrench on the right beside "Metadata" Click on it and it does the same thing!
It’s a great feature and good to be pointed out but this isn’t necessarily new. Certainly been able to do this as long as I’ve been using Resolve. Can only assume it’s down to screen resolution and UI if you’ve not noticed it before.
Hey there, could i ask what is that wavy sine curve thing at the bottom right hand corner of your clips and some of your audio in your timeline? I see that on my clips in my timeline sometimes, but cannot figure out what it is!
I always had the option to have both viewers when working on my 1440p laptop monitor, but but never had it on any 1080p monitor that I was working on. So I always thought it was resolution-related. Today I had to reinstall Windows due o some bugs an corruptions. Freshly installed DaVinci on the new drive and now I am stuck with only one viewer as soon as I activate the inspector (on the same 1440p screen it worked on beforehand...). I heavily use both viewers and the inspectior all the time, I kindof need this feature to be working.. Has anybody found I solution yet on how to fix that enoying bug? (Or whatever it may be...) Thanks in advance
?? new feature ?? I have DaVinci Studio 17.OB , and i have the 2 monitors simultanouly even if i have inspector open or close . And if I want to have only one monitor at a time, i use the ``Q`` shortcut to switch from timeline or source window . ( in menu ; view, source/timeline viewer )
There have been so many good features talked about in Resolve 18.1 that I am going to take a chance and update this evening. Yesterday I created a Backup of my computer and updated my drivers. Livin life in the fast lane. 😜🤪 Got to admit that this dual screen with the Inspector open will be my second best feature. Obviously isolating vocals from audio has to be in the number one slot. 😀
@@FilmResolved Just uploaded to Resolve Studio 18.1 and for some strange reason I don't get to have the Dual Screens and the Inspector all at the same time. I was also hoping for the new codec that some RUclipsrs were raving about as it was a smaller file size than h265. I have an RTX 3090 with the latest Studio Drivers from today. I shall have to look into why I don't have these features.😭😭
@@FilmResolved Yep, I did have loads of bugs however I discovered that my woes were hardware issues with my graphic card not being powerful enough. My RTX 3070, which was a beast for gaming, did not have enough vRAM and that was why I kept getting GPU Memory Full error messages. Now that I have upgraded to the RTX 3090 its all "sweetness and rainbows" for my RUclips projects. Only this week I bodged together a sort of Orange and Teal look for my latest episode by blindly pushing the Spider Web/Colour Warper thingie. I've have also just experimented rendering that project and can happily say that my upgraded Resolve Studio is faster. Yesterday my project took 23 mins and 7 secs. Today the exact same project took 20 mins 56 secs. Its not much but it is an improvement. Could I pick your brains about Bit Rates please? If you were to render a 4k project at h.265 for RUclips, what Bit Rate would you choose? I'm taking a punt on 45mb/s
RUclips recommends 35-45 Mbps for h.264. I personally use h.265 as the resulting improvements to compression artefacts after RUclips’s compression is day and night. Just ensure you choose a 10bit profile like High10 in the render settings. That’s very important. This all is based on the premise that the more you feed RUclips to process the better it’s results. I personally limit the bitrate to 16Mbps. I found that there is very little return on investment going any higher. There is gains but minor and not worth the addition storage IMO.
Another one they added is that when using multicam with a second screen, you can now send the multicam images to the second screen via clean feed, so you can now switch to send what goes to the second screen. Thanks for your review! 😀👍
And I don't have the so called preveiw window. And I don't have the so called generate proxy media when I right click on a file. Whether I open or close the inspector, the dual or single viewer option is not there. When I drop the file in the time line a duplicate of that file appears in the above left where the media files are in the first place wth the term timeline 1 next to it. When I place my curser on that file, I notice a single verticle line that can be moved by the curser. Not sure the meaning of it. Also when I drag a file in the timeline window below, the video file starts at the middle of that screen and each file is in segments instead of just showing that file. This of course translates to my having to keep scrolling there until I see the next file I had dropped and so on.
I'm not understanding how immedietly when you hit the dual viewer mode button you have footage on the left and right. I only have footage on the right but I have 2 different video clips in my timeline. You'd think you would just be able to click drag drop into that left window but it won't let you do that. Makes no sense.
Very fair point as I’ve come to learn. “New to me” is what I should have said. I’m going to be making a pinned comment with some additional info I’ve learned from the comments as this seems so be to do with how resolve scales the UI based on the hardware it detects / windows scale settings. It’s appears as though 18.1 is just scaling differently for me than anything before and has granted me this option as a result 🤷♂️ still not entirely sure of what exactly is going on though tbh but I’m glad I’m finally able to access this!
@@FilmResolved yes, windows scaling had a big impact on what and how was shown in the UI. unfortunately, in the past too little was published that only 100% or 200% and the minimum resolution allowed a correct display. but we on the mac don't know these problems at all.
I GENUINLEY DO NOT UNDERSTAND MY SHIT HAD TWO WINDOWS ONE WAS THE CLIP THE OTHER WAS HOW I WAS AFFECTING IT WITH TRIMMING AND NOW ITS NOT DISPLAYING ANYTHING EXCEPT THE FULL SOURCE NO MATTER HOW MUCH I SEARCH I CANNOT FIGURE OUT HOW TO CHANGE IT BACK TO TIMELINE PREVIEW
How do you mean that? I had to reinstall Resolve today and now my feature has gone missing, previously I had both viewers available with the inspector, now I only get one. You would save me if you'd know a way to get the 2nd viewer back.
@@lukasgr17with the inspector closed their should be a square or a 2 square in the top right hand corner of the viewer near the 3 dot hit that then reopen your inspector, resolve is smart tho it will switch viewer depending on context if you have the single viewer selected 😉
@@mariotriforce thanks, I know that, but I still prefer to have a dual viewer and the inspector. As it worked before, I guess there must be a way to get it working now again as well. Where do you scale Resolve? I tried scaling windows but thatvdid not help
@@lukasgr17 ya displaying all 3 can only be done at spefic sales I'd say check your windows scale but if your happy with that you can change scale under user preferences 😉
I’m on windows. It seems to be tied into how 18.1 is scaling with the windows scaling. It’s seems some people have had this for quite some time and others still don’t and I happen to be at a cross over point where my windows settings have crossed that point with resolves scaling of the UI. This is based on some info I’ve gotten from the comments so still learning as I go on this.
I'm on Windows too and found that if I close the Inspector (by just clicking on the tab), I get the two monitors, the clip monitor and the timeline monitor. Yay!
![What BEGINNERS Get WRONG About Scopes [DaVinci Resolve 17]](http://i.ytimg.com/vi/QJumee5_SZM/mqdefault.jpg)
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
UPDTAE. If you take a glance at the comments section here you'll quickly see mixed results. Some people have had full access to this for ages, some are like myself where its a recant thing and some still cannot access this.
SPECULATION MODE: Having chatted with some people in the comments here's what I think MAY be happening. Resolves UI has always been semi-automated, only allowing you a certain amount of control over the panels etc. and has always scaled itself in a certain way based on the hardware it detects and (new to me) it seems to also be affected by windows scaling.
When I first opened 18.1 I noticed right away it was scaling differently. Everything was smaller and less bulky which I was glade of because it was utilizing my monitors real-estate much better than before.
I believe this feature is a bit of a lottery and there seems to be a tipping point with how resolves UI scales based on your set up. When you cross this tipping point, you gain access to it. I believe that what ever the combination is of how 18.1 decided to scale the UI for my hardware finally crossed that tipping point and therefore I've gotten access to it and seemed like a "new" feature when really its simply new to ME.
Anywho, please keep letting me know your experience with this and perhaps let me know your screen size and resolution as it appears as larger / higher res have more success with this. I'd like to see if a pattern emerges.
I myself am on a UHD - 27 inch monitor.
I tested by using a Headless HDMI dongle & by setting resolution to 3840 x 2160. it was visible at that resolution 😀
I started using this feature since I first used Resolve 15. Nothing new in your video, but thanks, it may help some new users.
Yeah, seems it won't show on my 1080p monitor but will on my 4k..smh
windows scaling definitely has an impact, when i had my 1440p monitor scaled to 125% i got no dual view button but when windows scaling is turned off the dual viewer appears. but that means having to to work with text so tiny it's hard to read at a glance. really baffling decision on blackmagic's part to insist they know better than you what UI elements you want access to based on your screen setup
Thank you, you video helped me get rid of unwanted dual window, hope Davinci resolve developers make these things more user friendly and dont over engineer user interface.
"over engineer user interface" - That is, I hope that they will not become a disgusting adobe Premiere pro
I think its based on the hardware detection along with the size of your display and resolution. I have two 1440p 27' monitors and one 1080p 24' , when I drag to the 1080p an close and relaunch it would not have the button most of the time. but the specs of my pc would allow it sometimes. has to do with the code of the veiw display not having enough space to display the other view option until this update to fix for alot of people with optimization.
Resolve 14 (2017) had the "feature", maybe even earlier versions, you just need a higher resolution display or shrink down the media and/or inspector tabs.
Well I’ve had a UHD monitor for about 5 years now so what’s high resolution these days 😂 I was researching the forums before posting this and there was people unable to do it in resolve 17 with screen shots of the UI. That said you’re totally right about different people having different UI options based on hardware specs. Would it be fair to say this iteration of the feature is new, in the sense that you now decide on how it behaves rather than resolve deciding based on your hardware?
@@FilmResolved yes, its fair :) Windows DPI scaling also plays a role in the layout of Resolve, from what i can tell from your videos I think you are on 150% UI scaling, I use mine at 100% (43" UHD) to get more stuff on the screen larger and taller timeline. For me it just defaults to dual viewer. Might have come off a little rude at first, was not my intention, I`m just an old video editing nerd with ocd answering the question in the thumbnail :) Love your stuff, keep being awesome! ;)
Not at all you haven’t come across rude. Good point raised there about windows dpi. Resolve 18.1 is definitely scaling differently over all for me. In the past the bulkiness seems excessive for how high res my monitor is. Now it’s using the space much more efficiently. For example how many node I can see clearly in the color page is far more now. Over all I’m very happy with the UI now as we are already are so limited in its customisation.
It is based on the resolution os screen... It was always there since 16 (When I started to use resolve)
this comment saved me
YAY! I Was trying to figure out how to disable this, thanks!
I have Da vinci 18.1 and when i display the inspector window the dual viewer dissapears. What can i do to fix this? Do i need to update to a new version or maybe activate something in the workspace window?
This option seems to be gone now in DR 19. thoughts on how to do this with inspector open?
Literall thumbnail solved my problem. Respect
Blanco deserves more,pure talent
1:25 I went to this video for this moment because I didn't know how to close the second window (it's not necessary for me). thanks
That’s the reason I’m here - to figure out how to close the second window! 😅
When I maximize the window I lose it, when I size the window it comes back! you would think it would be the other way around? Thanks for pinned comment
ok, .. can I view two layers at the same time? I have 2 cameras and one audio channel. how do i view both cameras to make sure when to switch?
LOL i just found out about this. My video editing speed will double after this feature!!! Thank you.
Am I missing something? I've been using resolve for six years and it's always had this feature and I always have the inspector open.
Davinci Studio 18.5 this doesn't work for me .
IF THIS IS MISSING FOR YOU - Look for the "INSPECTOR" Tab with the brush and wrench on the right beside "Metadata" Click on it and it does the same thing!
It's quite odd, because on my iMac I get exactly what you have in this video but on my MacBook Pro MAx, nah - I can only have one viewer open when the inspector is on. I am on 18.6 🤷♂
Hey I'm new to editing and curious to how this feature would improve productivity? How can this feature be used to improve edititng? Thanks
I'm trying to do this and I don't even have that button I'm sooo confused lol
I was under cut not edit. SO nvm. I'll leave the comment here tho lol
Had the exact same issue, your comment helped me. Thanks!@@studiorose11
@@emilisdb that’s why I left it I was like maybe someone else didn’t realize also. Happy to help
@@studiorose11 same here bro
Does anyone know how to remove the scroll bar at the bottom of the preview window?
Its getting REALLY old everytime I click to stretch an overlay or image, I end up scrolling somewhere deep into the video and then have to find where I left off. Its very frustrating, I dont know when this happen but scroll bars were a basic feature to show or hide, from AutoCAD to every veriosn of Excel or Word I use.
Thanks
18.5 here and I can't have dual and inspector, which is very anoying. Ho w can I fix it? Also I have a decent hardware
Strange, I still can`t do that (version 18.1.2).
l landed on your video looking for a solution to the problem you used to have (either 'double preview' or 'inspector menu'). Unfortunately, the solution you provide does not work for me. The moment l click on 'inspector' the 2nd preview window disappears. l'll keep looking for a solution as this truly slows my editing down. Having to constantly switch between 'inspector' and 'double windows' is so annoying. Thanks for the video anyway! (Samsung lc43j890dkuxen).
Thanks for this video, but I can't find a solution to my problem, hopefully you can help. My viewer is only playing videos from my timeline and not playing anything from the media pool. Previously, when I hovered over the videos on the media pool, it would automatically switch and start playing them. Is there a setting I need to change? Thanks in advance.
Is this like a WIndows Only feature? I'm using Davinci 18.6 with an ultrawide monitor, so space is definitely not the issue. This doesn't work for me. I still have to turn off the inspector to get the dual viewer mode.
Okay, I think I solved it. In order for this feature to work, the height of the resolution has to be at least 1440. If you drop it down, the feature disappears even if you have an ultra wide monitor.
Yes, as per your update - Mine is how you described as the way it used to be. And I don't mind it all. Made me look though.
Did anybody find a solution yet on how to fix it when the 2nd viewer goes missing with the inspector?
IF THIS IS MISSING FOR YOU - Look for the "INSPECTOR" Tab with the brush and wrench on the right beside "Metadata" Click on it and it does the same thing!
It’s a great feature and good to be pointed out but this isn’t necessarily new. Certainly been able to do this as long as I’ve been using Resolve. Can only assume it’s down to screen resolution and UI if you’ve not noticed it before.
Hey there, could i ask what is that wavy sine curve thing at the bottom right hand corner of your clips and some of your audio in your timeline? I see that on my clips in my timeline sometimes, but cannot figure out what it is!
I always had the option to have both viewers when working on my 1440p laptop monitor, but but never had it on any 1080p monitor that I was working on. So I always thought it was resolution-related.
Today I had to reinstall Windows due o some bugs an corruptions. Freshly installed DaVinci on the new drive and now I am stuck with only one viewer as soon as I activate the inspector (on the same 1440p screen it worked on beforehand...). I heavily use both viewers and the inspectior all the time, I kindof need this feature to be working..
Has anybody found I solution yet on how to fix that enoying bug? (Or whatever it may be...)
Thanks in advance
?? new feature ??
I have DaVinci Studio 17.OB , and i have the 2 monitors simultanouly even if i have inspector open or close . And if I want to have only one monitor at a time, i use the ``Q`` shortcut to switch from timeline or source window . ( in menu ; view, source/timeline viewer )
There have been so many good features talked about in Resolve 18.1 that I am going to take a chance and update this evening. Yesterday I created a Backup of my computer and updated my drivers. Livin life in the fast lane. 😜🤪
Got to admit that this dual screen with the Inspector open will be my second best feature. Obviously isolating vocals from audio has to be in the number one slot. 😀
Voice isolation has been blowing my mind! And the timing couldn’t have been better for me due to a project I happen to be working on right now!!!
@@FilmResolved Just uploaded to Resolve Studio 18.1 and for some strange reason I don't get to have the Dual Screens and the Inspector all at the same time.
I was also hoping for the new codec that some RUclipsrs were raving about as it was a smaller file size than h265. I have an RTX 3090 with the latest Studio Drivers from today.
I shall have to look into why I don't have these features.😭😭
It’s so strange, you seem to be plagued with bugs with resolve and Nvidia!
@@FilmResolved Yep, I did have loads of bugs however I discovered that my woes were hardware issues with my graphic card not being powerful enough. My RTX 3070, which was a beast for gaming, did not have enough vRAM and that was why I kept getting GPU Memory Full error messages. Now that I have upgraded to the RTX 3090 its all "sweetness and rainbows" for my RUclips projects. Only this week I bodged together a sort of Orange and Teal look for my latest episode by blindly pushing the Spider Web/Colour Warper thingie.
I've have also just experimented rendering that project and can happily say that my upgraded Resolve Studio is faster. Yesterday my project took 23 mins and 7 secs. Today the exact same project took 20 mins 56 secs. Its not much but it is an improvement.
Could I pick your brains about Bit Rates please?
If you were to render a 4k project at h.265 for RUclips, what Bit Rate would you choose?
I'm taking a punt on 45mb/s
RUclips recommends 35-45 Mbps for h.264. I personally use h.265 as the resulting improvements to compression artefacts after RUclips’s compression is day and night. Just ensure you choose a 10bit profile like High10 in the render settings. That’s very important. This all is based on the premise that the more you feed RUclips to process the better it’s results. I personally limit the bitrate to 16Mbps. I found that there is very little return on investment going any higher. There is gains but minor and not worth the addition storage IMO.
that you so much, i looked for how to turn that second window of for hours
I discovered this by accident. How do you close it?
Never would have noticed that. Thanks!
It’s was pure luck that I did 😂
See pinned comment
does this feature apply in free version?
you saved my life thanks
Another one they added is that when using multicam with a second screen, you can now send the multicam images to the second screen via clean feed, so you can now switch to send what goes to the second screen. Thanks for your review! 😀👍
Oh nice!!! I use multicam a lot, can’t wait to try that out. Thanks for sharing!!!
This is so good it's hard to imagine why it hasn't been there the whole time.
See pinned comment
that was really helpful, thank you :)
And I don't have the so called preveiw window. And I don't have the so called generate proxy media when I right click on a file.
Whether I open or close the inspector, the dual or single viewer option is not there.
When I drop the file in the time line a duplicate of that file appears in the above left where the media files are in the first place wth the term timeline 1 next to it. When I place my curser on that file, I notice a single verticle line that can be moved by the curser. Not sure the meaning of it.
Also when I drag a file in the timeline window below, the video file starts at the middle of that screen and each file is in segments instead of just showing that file. This of course translates to my having to keep scrolling there until I see the next file I had dropped and so on.
Didn't work for me. I don't have the little box you have in your screen here. It was showing dual screens, yesterday, suddenly today it's gone. yay DR
I'm not understanding how immedietly when you hit the dual viewer mode button you have footage on the left and right. I only have footage on the right but I have 2 different video clips in my timeline. You'd think you would just be able to click drag drop into that left window but it won't let you do that. Makes no sense.
They snuck it in... it's not working that way for me as far as I know, but will update the software and see if it changes
Thanks for the update
See pinned comment
It is a great feature...Thanks♥
See pinned comment
i dont get the jog wheel when using dual viewer - any solution ? its there on the single viewer
i set my macbook resolution to more space and voila !
thank you!
not working for me :(
Thank You!
new feature? - this has been around for years!
Very fair point as I’ve come to learn. “New to me” is what I should have said. I’m going to be making a pinned comment with some additional info I’ve learned from the comments as this seems so be to do with how resolve scales the UI based on the hardware it detects / windows scale settings. It’s appears as though 18.1 is just scaling differently for me than anything before and has granted me this option as a result 🤷♂️ still not entirely sure of what exactly is going on though tbh but I’m glad I’m finally able to access this!
@@FilmResolved I can't see it. I have 18.1 free version on a 1920 x 1200 monitor. Can see it when I toggle off inspector
See pinned comment
@@KedarBhatlive See pinned comment
@@FilmResolved yes, windows scaling had a big impact on what and how was shown in the UI.
unfortunately, in the past too little was published that only 100% or 200% and the minimum resolution allowed a correct display.
but we on the mac don't know these problems at all.
bro i am using 18.1 but still not finding that option
Please see pinned comment 👍
Seems to be took out in 18.5!!!!😥
thank you
I GENUINLEY DO NOT UNDERSTAND MY SHIT HAD TWO WINDOWS ONE WAS THE CLIP THE OTHER WAS HOW I WAS AFFECTING IT WITH TRIMMING AND NOW ITS NOT DISPLAYING ANYTHING EXCEPT THE FULL SOURCE NO MATTER HOW MUCH I SEARCH I CANNOT FIGURE OUT HOW TO CHANGE IT BACK TO TIMELINE PREVIEW
Freaking god. Thank u
Resolve haveing 150% scale probably fixed this 🤔 😉
How do you mean that? I had to reinstall Resolve today and now my feature has gone missing, previously I had both viewers available with the inspector, now I only get one. You would save me if you'd know a way to get the 2nd viewer back.
@@lukasgr17with the inspector closed their should be a square or a 2 square in the top right hand corner of the viewer near the 3 dot hit that then reopen your inspector, resolve is smart tho it will switch viewer depending on context if you have the single viewer selected 😉
@@mariotriforce thanks, I know that, but I still prefer to have a dual viewer and the inspector. As it worked before, I guess there must be a way to get it working now again as well.
Where do you scale Resolve?
I tried scaling windows but thatvdid not help
@@lukasgr17 ya displaying all 3 can only be done at spefic sales I'd say check your windows scale but if your happy with that you can change scale under user preferences 😉
please please check your audio for mouth noises, its unbearable
You must be on Mac. Windows doesn't have that
I’m on windows. It seems to be tied into how 18.1 is scaling with the windows scaling. It’s seems some people have had this for quite some time and others still don’t and I happen to be at a cross over point where my windows settings have crossed that point with resolves scaling of the UI. This is based on some info I’ve gotten from the comments so still learning as I go on this.
See pinned comment
I'm Studio on Windows 10, 1080 monitor, default scamming, and I have it. 🤷♂️
I'm on Windows too and found that if I close the Inspector (by just clicking on the tab), I get the two monitors, the clip monitor and the timeline monitor. Yay!