Who doesnt like a good screw? 😆 My wallet affords me a wiha stubby. But I very much enjoy watching you all that have these use them and spin them. They look amazing.
Start with a bit set driver for (mobile/travel/repair) uses. For more requirements I recommend buy really project specific sizes + specialized screw heads; e.g. with electrical isolation (1000V) or for maximum mechanical strongness (old rusty screws) a full inner metal from screw head top tip to (hexagonal) back tail so hammering on the tail (mech. puls) or setting a plier/wrench on tail for more torque without dont risking to damage the tool itself.
If you ever have a knife, that is a problem a soldering iron works great you just put it in the screw and you can break the Loctite. It doesn't heat up anything else really either because you can put the head of the soldering iron right in the screw.
I tried!! I checked everything, the only 2 of them 97.2mm it’s made of brass, everything else is 86mm, it to small! I think it was before, maybe it going to be in stock again, but not now! Thanks for the reply!!
What was their reasoning for not being able to bump up from t6 to t8? Somehow that doesn't make sense to me. They can't possibly take up that much more space, that they wouldn't work. I've never understood that. At least you got a good.skrew 😂
My favorite driver has to be the Journey Tool Co. Turas. I have a titanium Turas and I love that thing. It was pricey but worth it in my opinion. I have tried almost all the drivers. Combat beads v1 and v2, Scout leather, and BRNLY. Have not tried the Good Screw....
The goodskrew timascus setup is gorgeous! While i would love one id never spend the money bc hey thats a 400 folder i could buy or whatever but maybe id drop a bill on a nice Ti bit driver. At the end of the day for me its a tool so i just have a CRKT scout knockoff which works ok for 20 bucks. Maybe ill upgrade one day but i enjoyed seeing and hearing about fancier drivers!
I was really looking to splurge and purchase the Get Good Skrew driver set until I realized the $125 listed was only for the driver, and the holder was another $150. $275 for a fidget bit driver set? I don't think so! I'll just drill a couple holes in a decorative wood block for desktop storage of my driver and bits... 🙂
Hi! I don’t know about the quality, I think it’s very good, but when you say about different sizes, it’s not true!! They all the same, and very small!! And the customer service is horrible!! They didn’t answer the questions!!
Get Good Skrew code Lefty10: www.getgoodskrew.com
My Disassembly Tools:
Knife Pivot Lube code Lefty10: knifepivotlube.com/?ref=i1si9t_r_fd7
Super Glue: amzn.to/3VavqUB
Wiha Stubby Driver: amzn.to/3AQUEQ1
Wiha T8 Torx Bits: amzn.to/3OG3OEA
Wiha Torx Set: amzn.to/3OE2GBt
Isopropyl Alcohol: amzn.to/3F94TBP
Vibratite 122 - amzn.to/3VAU0y5
Irwin Vice Grips: amzn.to/3u35PB9
Plastic Pry Set: amzn.to/3UrqDgJ
Magnet Pen: amzn.to/3ipNICO
Tinkerforce Tray: tinker-force.com/collections/frontpage
________________________________
Follow me on Instagram: instagram.com/leftyedc/
Email me at: Leftyedc88@gmail.com
Divo Knives - My Knife Company:
Website: divoknives.com/
Instagram: instagram.com/divo_knives/
Channel links:
Patreon: www.patreon.com/LeftyEDC
Teespring Store: my-store-11205914.creator-spring.com/listing/detent-diva-collection
Affiliate Links:
Urban EDC: bit.ly/3Hr77vX
Traditional Pocket Knives/C. Reisner Cutlery: www.traditionalpocketknives.com/?sca_ref=3003389.dF8svDDRGL
BladeOps: bladeops.com/?aff=11
20% OFF Links:
Guard Dog Inserts code Lefty20: www.guarddoginserts.com/
3DCPrintings code Lefty20: www.etsy.com/shop/3DCPrintings?ref=shop_sugg
15% OFF Links:
Andar Products: andar.com/?mct=LEFTYEDC
10% OFF Links:
Olight code LeftyEDC: www.olightstore.com/s/BXNXEC
Blue Creek Knives code Lefty10: bluecreekknives.com/lefty10
Knife Pivot Lube code Lefty10: knifepivotlube.com/?ref=i1si9t_r_fd7
Big Idea Designs code LeftyEDC: bigidesign.com/leftyedc
Axial Gear code Lefty10: www.axialgear.com/?rfsn=6074131.ee91f3&
Get Good Skrew code Lefty10: www.getgoodskrew.com
White Mountain Knives code Lefty10: whitemountainknives.com
Asher Knife Co. code Lefty10: www.asherknives.com
Skiff Bearings code LeftyEDC: www.skiffmadeblades.com/collections/bearings
NJT HandPower code Lefty10: www.njthandpower.com/products
Big White EDC code LeftyEDC: bigwhiteedc.com/?referral_code=VIFXVG3&source_type=member_plugin_referral&slt=member_plugin_referral
Fidget Things code Lefty10: www.fidgetthings.com/
Issuing Stitches code Lefty10: www.etsy.com/shop/IssuingStitches?ref=shop_sugg
5% OFF Links:
Dapper Designs code LeftyEDC - dapperdesign.com/?ref=P5ynrrgb
My Disassembly Tools:
Knife Pivot Lube code Lefty10: knifepivotlube.com/?ref=i1si9t_r_fd7
Super Glue: amzn.to/3VavqUB
Wiha Stubby Driver: amzn.to/3AQUEQ1
Wiha T8 Torx Bits: amzn.to/3OG3OEA
Wiha Torx Set: amzn.to/3OE2GBt
Isopropyl Alcohol: amzn.to/3F94TBP
Get Good Skrew code Lefty10: www.getgoodskrew.com
Vibratite 122 - amzn.to/3VAU0y5
Irwin Vice Grips: amzn.to/3u35PB9
Plastic Pry Set: amzn.to/3UrqDgJ
Magnet Pen: amzn.to/3ipNICO
Tinkerforce Tray: tinker-force.com/collections/frontpage
Thank you so much for watching and following along. I have such a blast bringing new content to you and am always open to chatting, so feel free to reach out anytime!
-Kev
Who doesnt like a good screw? 😆 My wallet affords me a wiha stubby. But I very much enjoy watching you all that have these use them and spin them. They look amazing.
I have a Wiha stubby bit driver but its hard to hold for my big hands so I’m looking to get a longer version soon!! 👍🏻
Start with a bit set driver for (mobile/travel/repair) uses. For more requirements I recommend buy really project specific sizes + specialized screw heads; e.g. with electrical isolation (1000V) or for maximum mechanical strongness (old rusty screws) a full inner metal from screw head top tip to (hexagonal) back tail so hammering on the tail (mech. puls) or setting a plier/wrench on tail for more torque without dont risking to damage the tool itself.
the Wiha is the only one anyone really needs. I get why you like your pretty fidget spinner drivers, but let's be real
My Carpal Tunnel disagrees with you.
Alot of cool drivers. I like the dedicated wiha drivers I have a 6 8 and 10. Plus I have a small wera bit driver. Great video 👍
Smart choices
If you ever have a knife, that is a problem a soldering iron works great you just put it in the screw and you can break the Loctite. It doesn't heat up anything else really either because you can put the head of the soldering iron right in the screw.
They did! They said, they probably have only small one, anyway thank you very much for your help!!
That is so cool. I think I have some kind of addition to hex bits and drivers.
I tried!! I checked everything, the only 2 of them 97.2mm it’s made of brass, everything else is 86mm, it to small! I think it was before, maybe it going to be in stock again, but not now! Thanks for the reply!!
Yea the real long ones i think are phasing out for smaller ones.
What was their reasoning for not being able to bump up from t6 to t8? Somehow that doesn't make sense to me. They can't possibly take up that much more space, that they wouldn't work. I've never understood that. At least you got a good.skrew 😂
The clip screw? Just what they use i guess. Usually it’s because flat top vs button or inset vs not. Shit like that.
I luv the driver, but the bit holder needs magnets in it to hold the bits in then you could lay it down without the bits falling out.
Yea would be cool
Hey if you ever sell that bit bar 2 I’ll buy it and a exceed design titanium utility knife if you got one.
If it possible, please ask them? I like the 97.2 mm one, titanium, and the color is the same you have!! So beautiful!! Thanks anyway!!
They only have 1 version they said. And said they would respond to u
My favorite driver has to be the Journey Tool Co. Turas. I have a titanium Turas and I love that thing. It was pricey but worth it in my opinion. I have tried almost all the drivers. Combat beads v1 and v2, Scout leather, and BRNLY. Have not tried the Good Screw....
GoodSkrew is sick man. If you like the Turas the small driver should be fine if you want to try one. A titanium Turas would be sick though
The goodskrew timascus setup is gorgeous! While i would love one id never spend the money bc hey thats a 400 folder i could buy or whatever but maybe id drop a bill on a nice Ti bit driver. At the end of the day for me its a tool so i just have a CRKT scout knockoff which works ok for 20 bucks. Maybe ill upgrade one day but i enjoyed seeing and hearing about fancier drivers!
Good call
I love the 711L Lollipop
Great introduction!
You earned a subscription and an order with your promo code!
Gotta get something 🤔I want to try to disassemble my knives never tried & didn't have enough knives 😏
A set is on the list ☑️
Just brought a pay and added your name 10% ty 😊
Pretty cool, i went with CRKT Doorknob 6bit driver instead.
Edit: i will gladly take the Bali set you hate so much 25?
Sure. I think i still have it haha. Email me at leftyedc88@gmail.com
I was really looking to splurge and purchase the Get Good Skrew driver set until I realized the $125 listed was only for the driver, and the holder was another $150. $275 for a fidget bit driver set? I don't think so! I'll just drill a couple holes in a decorative wood block for desktop storage of my driver and bits... 🙂
Checkout Tinkerforce. They make a $5 tray accessory to hold it and bits
Nice video!
The prices are absolutely outrageous.
👍
Boca bearing probably has 668
And bye the way, I still don’t have an answer from them! Still waiting!
Hi! I don’t know about the quality, I think it’s very good, but when you say about different sizes, it’s not true!! They all the same, and very small!! And the customer service is horrible!! They didn’t answer the questions!!
Getgoodskrew? Try reaching out again. They have great service. And there are a bunch of sizes. Check the specs when ordering.
If u have an ossue i can talk to them for u but an email should solve ur problems