Knife Maintenance Sucks Because You're Doing It Wrong...The Best EDC Screwdrivers For Knife Nerds!
HTML-код
- Опубликовано: 14 апр 2023
- Get your Knafs "S5" Driver here: bit.ly/3ULJzs7
Wiha T-10 Bit 🤓: bit.ly/3GNLcQh
Ben just created what may be the best screwdriver/bit driver out there for tinkering with and upgrading your knife on the go! We sat down to have a full talk through of his new driver and see how it measures up with all the others. There is nothing worse then striping out pivot or scale screws when you are trying to do a little bit of maintenance. I've tried just about every tool out there so it was fun to see the though Ben has put into his new driver and why it really is so dang handy!
CRKT Driver: amzn.to/43B6c6r (affiliate link)
Benchmade Blue Box: amzn.to/3UTyipX (affiliate link)
Kershaw Driver: amzn.to/3KFbXaH (affiliate link)
Wiha/Boker Driver: amzn.to/40fN7nw (affiliate link)
0:01 Is this the best EDC Bit Driver?
0:16 The importance of being a tinkerer
0:48 Husky Homedepot Driver
2:12 Benchmade Blue Box
3:50 Wiha Tools and Bits
4:30 Price does matter
7:07 Knafs Driver Bits
10:04 Why we hesitate to work on our knives
11:36 Pen Drivers VS Box Drivers
16:08 Why length of driver is essential to not stripping your hardware
19:10 We all love a good fidget factor😁
20:03 What I would change about the Knafs Driver and why it's still great
23:13 It's always better to build up then break down
Disclaimer:
As an Amazon Associate I earn from qualifying purchases.
Everyone go buy this Knafs driver. Ben clearly needs the money because he can’t afford a haircut!
I think there's enough space around the pen to carve out slots for 4 or even 6 bits, without weakening the driver. Who's with me?
Man I am so mad at myself for watching basically every vid on the channel. Now I have to actually wait for new videos now instead of being able to scroll down and click something I haven’t seen.
Best tip I’ve ever been given was to set up my phone to record disassembly. It helps so much for knives, firearms, cars, locks, etc. EVERYTHING. saved my butt a number of times
When I got in to EDC knives I was watching BladeHQ videos on RUclips and really was thinking that Ben is just an arrogant pr*ck. But, when he started to design his own knives/products my opinion changed. He is really thinking in functionality of EDC knives and the support to these knives. I mean the index finger limit, the design and evolution of the Banter, the magnets in the tool burrito, the bit driver. All designed with functionality in mind. Ben…you have gained my support and I salute you. (although I do not own any of you products as they are harder to get in the EU)
BEN AND ZAC AT IT AGAIN??? Instantly the best video of the day! Love you guys ❣
The wiha stubby beats the lot . Those who do this professionally know this. Its got the best torque. . Many knife collectors or users do not carry bit drivers everyday in their pocket. It stays at home when needed.
If yout taking knives apart, just buy mac R.B.R.T bits. Yea their expensive but you will never strip a screw again and even if you have a stripped screw, itl take it out and even put it back in. Their 4.99 but you can just order t6, 8, and 10 which will cover the most used knife screws. it will save you so much frustration for just 15 bucks.
Would like a T-10 as well. Don't have to give up the flathead, though, just add the T-10. It has room to carry 3 arlund the outside, and yku can just keep the 4th in the "user" position.
Bladehq executives are watching this right now wishing they would have payed both these guys better and retained them… 🫡
I personally went with the Wera Stubby magazine. I consider Wera Tools to be of the most premium quality and liked their magazine design/access the most.
I hope you guys continue to find reasons to continue making videos together. I always look forward to watching when I see a new one pop up in my RUclips feed because of the fun friendly chemistry you guys have. 👍
Just ordered mine.
Hats off to Ben. He's pretty much reinvented the wheel with every product he comes out with. He's a marketing genius to get people to buy this stuff.
I don’t know what it is about you two but could watch you all day talk about anything! Great as always. Thanks for the great products and entertainment!
Love you guys. I've been tinkering and taking things apart since I was 4 and I just love tools and their design and how it feels in the hand and from this end it look like you hit this one out of the park...great job and keep doing what you doing 😁
The driver looks awesome! Love how much thought Ben put into the design. Functionality and the colours are right up my street.
I bought a KNAFS bit driver to swap the scales on one of my landers to black micarta scales, and this also happened to be my first time customizing a knife (I’m new to this knives hobby). I’m really happy with my purchase, especially after watching this video explaining the why behind the design! You’re making some really great stuff, Ben! And great video as always, Zac and Jamie!
Just placed my order. Picked up the T10 bit as well. Looking forward to retiring the blue box and using a well made driver! Thanks for the great video Zac and Ben.
This looks great! I agree with Zac about the T10. It may not be as common as the flathead, but I need it for my Spyderco knives and I can use the flathead on my Victorinox. Also, the flathead is the easiest tool to improvise: a prybar, a dime, a key, even a fingernail can work in a pinch (at least to get by until you can find an actual flathead).