I just bought one from you. I was so disappointed at the very little information on how to put a 5.75 light into a Stryker. I found some drop in kits for over $500...life saver! Thanks. Looking forward to it arriving.
Just added in the light in my stryker did everything word for word thank you very much for all the help was so lost until i saw this video . I even got the wrong light at first it was a 7 inch until i heard you say i need the 5.75 inch thank you very much it looks amazing
Is this kit still available? I bought an after market headlight years ago but couldn't figure out how to mount it. I newly rediscovered it and then found your video. Please tell me these are still available 🤞🤞🤞
So let me understand this, this doesn’t include the LED Headlight, I have to buy that separately? Can you link where you got that headlight? I know you said Amazon but what’s it called
Hello, You are correct, we sell just the adapter. Please check out the all metal v2 on our website below. The headlight used in this video is linked below as well. Www.nextlvlinnovation.com/575v2 www.amazon.com/dp/B071GCDC33/ref=cm_sw_r_cp_apa_glt_fabc_6YWPBXFVEMAH3A2AHWXR?psc=1
@@nextlvlinnovation Awesome thank you! I have a 2011 Yamaha Stryker and need to LED Headlight so your a big help. Also trying to find a loud exhaust cause right now I have the stock exhaust with baffles. I’m stuck between Vanes and Hines or the cobra. But can’t really tell which is louder or sounds better do to RUclips’s audio quality.
Hello, This is the old version 1 adapter. The new adapter can be found here: www.nextlvlinnovation.com/575v2. The black bezel for a Yamaha Striker can be found here: www.shopyamaha.com/product/details/black-headlight-bezel
Hello, The all metal Version 2 has replaced this product. It can be found at the link below. Please add your email to the list a little way down the page to be notified when back in stock. Www.nextlvlinnovation.com/575v2
i have a raider S 2010 and i would like to go with the led headlights and signal lights. i would like to go with the chrome look. What products do you suggest? thx
You will need the 5.75in M1 Adapter and the Load resistor. For chrome headlights we have the 5.75in Daymaker and Halo options. These products can be found at our website below. We do not carry turn signal lights. Www.nextlvlinnovation.com
I just purchased a headlight for my Yamaha Stryker by Eagle. The light is listed as "exact fit." It is the Eagle LED headlight (5 3/4 inches) for the Yamaha Stryker. Will your adapter kit work with this specific light? Otherwise I am sending the light back.
@@nextlvlinnovation 2008, I saw you have v2 already, my main concern is the spacing between the led and the housing, some use a rubber ring around it, but your v2 shows a bit more gap.
@4di_4di yes this will fit a 2008 Warrior XV17 motorcycle. For more information on the V2 adapter go to our website Www.nextlvlinnovation.com. The gap you see in the V2 is for airflow to cool the LED and for vertical angle adjustment. Our adapter also allows you to customize the LED headlight where the others do not.
Hi Matthew, The stl file is not available. We will have more inventory available this friday on our website. It is engineering plastic which is uv and chemical resistant. Www.nextlvlinnovation.com
Hi Al, This adapter should fit your 2004 Yamaha Road Star Warrior 1700 (XV17PCS). Please take a look at our website for more details and how to order. Thanks! www.nextlvlinnovation.com
I have a yamaha raider S 1900cc I keep hearing when installing these led head lamp your stator gets like a growling noise does it happen also with the Stryker
I have only heard this from the Raider owners and it only happens with certain brands of LED headlights. Some are ok and work normally. You would have to check the Raider forums/facebook to see which lights do work.
At this point we are unsure whether this will happen. Ill make a post on facebook and put up more info on our website Www.nextlvlinnovation.com if it does.
@@Outdoor_MED this will fit the majority or 5.75" aftermarket lights. There is a document located on our website that will walk you through what to look for. If a light is marketed toward Harley it will fit this adapter.
@@nextlvlinnovation Thanks bro. That's nice too. What all would I need to keep from the stock assembly? In order to use this one. I know I need to keep the headlight bucket. I'm just a little lost on the stock parts inside the headlight bucket I need to keep. Your help is extremely appreciated.
Next Level Innovation I have a Yamaha Vstar 650 custom, I bought the 5 1/2 led light, the stock hardware does not fit over or line up with the after led light.
Found myself trying to drill the led lamp in order to fit the oem bracket until I gave up and found your video. You are a life saver.
I just bought one from you. I was so disappointed at the very little information on how to put a 5.75 light into a Stryker. I found some drop in kits for over $500...life saver! Thanks. Looking forward to it arriving.
Thank you and we hope you enjoy!
Just added in the light in my stryker did everything word for word thank you very much for all the help was so lost until i saw this video . I even got the wrong light at first it was a 7 inch until i heard you say i need the 5.75 inch thank you very much it looks amazing
Well, I am getting my 2016 Stryker in a few weeks... I will be ordering one of these asap!
Dude!!! I just got youre product in the mail.... I will definitely do business with you in the future as well as my friend
I just got a 2012 Yamaha raider. I will buy this product. It looks great.
The all metal Version 2 is out now and can be found here.
Www.nextlvlinnovation.com/575v2
Great idea, after trying to rig mine up, to no avail.. I took a shot on an Internet Search and Low & Behold found this. so yeah i bought one. Thx
Great product. I got mine 2 days ago and installed on my stryker yesterday. Great fit. Looks awesome.
Thank you Kamil for the support!
Did you use their headlight? I have an Eagle Light and do not like the gap in between the light and the bezel.
Nice light and nice bike!!
Thanks so much for the very descriptive video.
I need to replace my stock light, what's the kit name and the light name, please? Thanks
Is this kit still available? I bought an after market headlight years ago but couldn't figure out how to mount it. I newly rediscovered it and then found your video. Please tell me these are still available 🤞🤞🤞
Yes it is!
Www.nextlvlinnovation.com/575v2
You don't post to Ireland, do you?
Hi Keith,
When you add a product to the cart on our website it will quote you the shipping cost.
Www.nextlvlinnovation.com/575v2
Where can i find the same adapter??? Everything is sold out
Hello,
Please go here to version 2.
Www.nextlvlinnovation.com/575v2
Also go red sox!!
So let me understand this, this doesn’t include the LED Headlight, I have to buy that separately? Can you link where you got that headlight? I know you said Amazon but what’s it called
Hello,
You are correct, we sell just the adapter. Please check out the all metal v2 on our website below.
The headlight used in this video is linked below as well.
Www.nextlvlinnovation.com/575v2
www.amazon.com/dp/B071GCDC33/ref=cm_sw_r_cp_apa_glt_fabc_6YWPBXFVEMAH3A2AHWXR?psc=1
@@nextlvlinnovation Awesome thank you! I have a 2011 Yamaha Stryker and need to LED Headlight so your a big help. Also trying to find a loud exhaust cause right now I have the stock exhaust with baffles. I’m stuck between Vanes and Hines or the cobra. But can’t really tell which is louder or sounds better do to RUclips’s audio quality.
HI, just command one right now and i want the black ring, my stock one is chrome, do you know wyere i can find one
Hello, This is the old version 1 adapter. The new adapter can be found here: www.nextlvlinnovation.com/575v2.
The black bezel for a Yamaha Striker can be found here: www.shopyamaha.com/product/details/black-headlight-bezel
I can find this product ..please send a link
Hello,
The all metal Version 2 has replaced this product. It can be found at the link below. Please add your email to the list a little way down the page to be notified when back in stock.
Www.nextlvlinnovation.com/575v2
Will fit this adaptor also to the headlight from the midnighstar xvs950 ? Where can i order this ? THX
found it
ordered !!
i have a raider S 2010 and i would like to go with the led headlights and signal lights. i would like to go with the chrome look. What products do you suggest? thx
You will need the 5.75in M1 Adapter and the Load resistor. For chrome headlights we have the 5.75in Daymaker and Halo options. These products can be found at our website below. We do not carry turn signal lights.
Www.nextlvlinnovation.com
Do you make one for a 2002 Honda shadow vt1100 spirit?
Hello Willie,
This adapter will not work with your year and model motorcycle. Sorry!
I just purchased a headlight for my Yamaha Stryker by Eagle. The light is listed as "exact fit." It is the Eagle LED headlight (5 3/4 inches) for the Yamaha Stryker. Will your adapter kit work with this specific light? Otherwise I am sending the light back.
Can you please advise if this will work for an XV1700 warrior? Thanks.
What year is it?
@@nextlvlinnovation 2008, I saw you have v2 already, my main concern is the spacing between the led and the housing, some use a rubber ring around it, but your v2 shows a bit more gap.
Waiting please for reply, thank you!
@4di_4di yes this will fit a 2008 Warrior XV17 motorcycle. For more information on the V2 adapter go to our website Www.nextlvlinnovation.com.
The gap you see in the V2 is for airflow to cool the LED and for vertical angle adjustment. Our adapter also allows you to customize the LED headlight where the others do not.
@@nextlvlinnovation thank you!
any cool kits for a 09 1300 Yamaha tourer ???
Hi Sare
We do not currently have an LED adapter that will fit this style of headlight bezel or form factor. Thanks for reaching out.
To bad you dont have this for a 7inch led. Just upgraded from 5.75 to 7inch on my yamaha warrior
Patrick,
Did you change your bucket out from the stock one?
I need the bracket for 2009 yamaha vstar 950 tourer and can’t find it nowhere. Is a 5 3/4 in led light. Do you know where I can find it?
You came to the right place! I see you found our link to version 2 of this adapter. Thanks for your support.
Have you got this in aluminium now? And can you deliver, ship it to the United Kingdom? Thanks
Hello,
We did make this in all metal. It is available at the link below and yes it can be shipped to the UK.
Www.nextlvlinnovation.com/575v2
Do you make an adapter for a 2015 Yamaha xvs1300? I've looked everywhere I can't find an led replacement assembly anywhere
Hi Ricky,
I sent you an email.
Where can you get this?
www.ebay.com/itm/Yamaha-Stryker-Raider-LED-Headlight-Adapter-/383278105899?hash=item593d27c52b&_trkparms=pageci%3A07ba197e-0fe7-11ea-929e-74dbd1804537%7Cparentrq%3Aa532141416e0a688b86f0fd9ffe36d02%7Ciid%3A1
Next Level Innovation you would recommend using Blue Loctite on all the threads?
All hardware comes with thread locking patches so more loctite will not be necessary!
@@nextlvlinnovation thanks
Next Level Innovation hello, I was wondering if this would work for warrior.
@@ishappens I used it on my 03 Warrior, worked great.
Where can I download the STL for the 3d printed adapter & ring and is that PLA or something better geared towards heat & uv?
Hi Matthew,
The stl file is not available. We will have more inventory available this friday on our website. It is engineering plastic which is uv and chemical resistant.
Www.nextlvlinnovation.com
Hi, I have a ‘04 Yamaha Warrior 1700. Will your LED adapter ring fit a 5 3/4 LED into the bucket ?
Hi Al,
This adapter should fit your 2004 Yamaha Road Star Warrior 1700 (XV17PCS). Please take a look at our website for more details and how to order. Thanks! www.nextlvlinnovation.com
I've a 2011 V Star 950 Tourer. Will this setup work for me?
Hi Dean,
Yes, this adapter will fit your 2011 Vstar 950 tourer. The link to purchase is located in the description area of this video.
@@nextlvlinnovation Thank you. Now I have to wade through the hundreds of LED headlights to find a reliable one. I'm going to order your adapter.
You work on pool table? 🎱😉
Key ring is still loose when placing it on a 5.75" aftermarket headlight. Any suggestions?
Hi Angelo,
Please email us at nlinnovationllc@gmail.com with more information and images if you have them.
I have a yamaha raider S 1900cc I keep hearing when installing these led head lamp your stator gets like a growling noise does it happen also with the Stryker
I have only heard this from the Raider owners and it only happens with certain brands of LED headlights. Some are ok and work normally. You would have to check the Raider forums/facebook to see which lights do work.
@@nextlvlinnovation ohh I see thank you
@@clohase1468 i just bought Raider S 2010 and looking for leds. So did you install leds on your raider S? if yes, can you please share what type?
Nice Video. Very Helpful. What size light are you using? 7" or a 5 3/4" for the Yamaha Stryker?
Any aftermarket 5 3/4" LED Headlight can be used with this bracket.
Heard you might make these out of aluminum, if so, any idea when and price point?
At this point we are unsure whether this will happen. Ill make a post on facebook and put up more info on our website
Www.nextlvlinnovation.com if it does.
Where can I order this?
Hello Miguel,
You can order version two below:
Www.nextlvlinnovation.com/575v2
What if need bezels and bucket
Where do i go to purchase this product?
Hello!
This can be purchased from our website below:
Www.nextlvlinnovation.com/shylah
@@nextlvlinnovation Can this fit any LED headlight?
@@Outdoor_MED this will fit the majority or 5.75" aftermarket lights. There is a document located on our website that will walk you through what to look for. If a light is marketed toward Harley it will fit this adapter.
Can this work for the Yamaha v star 950?
Hi Eric,
What year is it?
When will they be back in stock
This Thursday or Friday! Keep an eye out on our website.
@@nextlvlinnovation still havnt seen them back in stock, you thinking tonight or longer?
@@gillyman7155 the shipping got delayed to Saturday, sorry for this inconvenience.
@@nextlvlinnovation k so they'll be back in stock tomorrow? I just wanna know when I can place my order
@@gillyman7155 yes you are correct, tomorrow evening.
This set up still available?
Hello,
This setup was discontinued but replaced by our all metal 5.75in headlight adapter.
Www.nextlvlinnovation.com/575v2
@@nextlvlinnovation Thanks bro. That's nice too. What all would I need to keep from the stock assembly? In order to use this one. I know I need to keep the headlight bucket. I'm just a little lost on the stock parts inside the headlight bucket I need to keep. Your help is extremely appreciated.
You will need to keep the stock bucket and bezel as well as both Tnuts for the side mounts, the adjustment screw, spring and nylon white nut.
@@nextlvlinnovation thank you for your help brother. I'll be purchasing the new one you have available. Thank you again.
@@nextlvlinnovation1 quick question. Does your kit come with side mounts?
Will this work for a yamaha bolt??
Yes it will Greg, more information can be found on our website as well.
Www.nextlvlinnovation.com
Awesome. Saw you guys are in MA. Love supporting my home state :)
What town are you from?
Is that a stock headlight bucket or does that come with the hardware
The adapter is sold to fit the stock bezel and fit within the stock bucket. More information can be found here Www.nextlvlinnovation.com/shylah
Next Level Innovation I have a Yamaha Vstar 650 custom, I bought the 5 1/2 led light, the stock hardware does not fit over or line up with the after led light.
@@rammsteinxs what year?
Next Level Innovation 2000
@@rammsteinxs unfortunately this adapter will not fit your particular bike. We are in the process of looking into your style of motorcycle.
8 238,47 RUB + доставка: 2 059,62 RU
Вы е@@@улись!?????