Bought one for my C109 after son put one on his C50. There are differences in mounting. But it IS doable with some Disney engineering. The green tabs will be the ONLY mounting, you need 2 1/4" spacers, 2. 3/4 "- 1" bolts and nylon nuts. Tighten securely. Do not install the spring adjuster, it won't be needed. I Also had to bend the bottom of my chrome ring for tilt clearance. I also added 9/16 urethane foam weather strip to the ring to close off the gap and help keep water out.
2004 Suzuki Intruder VL1500LC 7" adapter needed... Thank you!! There are many people out here that would like to buy something of the animal. But, the production lines seem to be catering to Harley Davidson.... Help us in the 🇺🇸.... Thank you
This is amazing! However, why not make it as affordable as the other adapters? I have a 2001 Kawasaki Vulcan 1500, and THIS is the only way to make the led light fit, but at $105 is almost twice as expensive than the whole set of headlight and fog lights ($60) it doesn’t make sense. All I can find is the other adapter for $20 but that doesn’t fit. I’m stuck.
Hi Dan, We have worked as hard as possible to make this adapter as affordable as it is. We stand by the quality of our product and will not cheap out on quality to save a few bucks. If you do decide to try our product you will not be disappointed. If you have any questions we are here to help. Thanks and ride safe!
@@davidhamilton2671 Hi David, there are a lot of aspects that go into designing and making a product like this that drive cost. Since we are a small company we cannot mass produce this part like how headlights are made.
Do you an adapter for a 99 Suzuki Intruder 1500? I took my headlight apart to take a better look at it and mine has 2 adjustment brackets, opposite sides of each other....
I can't see at night without bright on. Thinking about this lamp but it looked like there is a gap between lamp and ring, is there or does it just look that way? Good vidio, your instruction has to be easier to understand than the stuff that comes with the light.
Hello, I have not tried the adapter with this motorcycle. It does look like it could work. I will test this out and let you know. Please give a few weeks.
I’m about to buy this adapter I’m just wanting to know with the 2007 Suzuki Boulevard C50. Will any aftermarket led fit with the adapter? I just Tony want to be stuck too high to where I can’t get enough light on the road to see at night or early morning.
Hello, Most 7in LED headlights will work with this adapter including ones on our site. We have a LED search guide that will step you through what to look for if you buy a light from a 3rd party source.
It fits nice but when I adjust the screw tighter it just moved the headlight higher up I need it more down to light the road. Also stock light has 2 adjustment screws?? This supports one 1
Hi Corey, The adjustment screw does not need to be tightened all the way. Adjust the screw so that the headlight is pointing in the direction you need it to be (loosen). The second adjustment screw was for left to right adjustment which is needed for halogen lights. LED lights give off an even side-to-side projection due to the lens. I hope this helps
Hello Reginald, This product has been replaced by our 7in model 2 adapter that will cover all motorcycles and then some. Please visit our website. Www.nextlvlinnovation.com and enter your motorcycle information.
Hello, The headlight and wiring in the headlight bucket should be water tight. Water can potentially get in the bucket with the stock setup as well. We have never heard of this being an issue with our current customers.
Hello, Unfortunately this adapter will not fit the M50 (VZ800) motorcycle. We are currently working on other solutions and should be released sometime this year.
2006 Boulevard C90T. Replacing the main headlight with 7" halo using one of your adapters but i would also like to do the same with the auxiliary lights on the lightbar. Is an adapter needed to replace the auxiliary lights as well?
Hi, Is it possible for you to send us images of the headlight assembly and bucket? We would need to see what the current bracket looks like. Info@nextlvlinnovation.com
Hi Dave, This comes with the adapter and hardware. The light is sold separately and there are many 7in options out there that fit your style. This adapter will only fit the Volousia VL800 K5 model. I'd recommend going to our website for more information and documents. You can also purchase the adapter there. Www.nextlvlinnovation.com/simba
Nice Video and the kit looks like good quality. I wonder if there is any kit like this, that fits to the original lamphousing for a Suzuki VL 1500? I didn't find anything yet, but I'd really like to upgrade the light. The H4 bulb doesn't give the best light, eventhough I bought one of the brightest ones on marked...😬
Jeff, More information can be found on our website. Www.nextlvlinnovation.com. look for the 7in adapter under products. We also have documentation that can be helpful.
Hi William, Please take a look at the documentation on our website for the 5.75 adapter that we sell. We have not tried this adapter with your bike before but it looks like it could work. Www.nextlvlinnovation.com/shylah
Hi Sam, thank you very much! This adapter will fit your 2015 C50 VL800 and more information can be found here: Www.nextlvlinnovation.com. It is possible to do a future longevity review. I think it would have to be the 1 to 2 year mark since these parts are all metal and powder coated to protect against the environment so not much will change if any.
Hello, This 7in headlight should work in this adapter. The main things to look for are the 3 keys located on the back side of the headlight. We have a document on our website that goes over what to look for. You can send this to the light manufacturer to make sure. Www.nextlvlinnovation.com/simba
You can find this adapter on our website under 7in Model 1. The 7in Model 2 can also accommodate newer and older C50 and C90 motorcycles. Www.nextlvlinnovation.com
No you don't bro. The intruder ended in 2005 and became the blvd.C50/C90. The C50 is 800cc and the C90 is 1500cc. There is no such thing as an 06 suzuki intruder 1400 😢😢 that's probably why you can't find a light for it 🤷♂️
The lamp was on a soft leather cover and is one of our demo lights used for installation and testing purposes. A full LED headlight setup gives the bike a nice look and a better light dispersion than LED bulbs.
I would think the front bezel would be able to clamp onto the new led light but to keep it positioned you may need to drill into the heatsink fins and attach with a bolt.
So I just recently bought the headlight off eBay and didn’t know I needed a conversion kit to install the headlight. Where can I find just the conversion kit and know I’m not just paying for a picture and hoping I get everything?
Please visit our website Www.nextlvlinnovation.com. Everything is gaurenteed with money back. You can also go through our eBay page if you prefer that platform.
let me save all you Suzuki SV650 owners that want to change over to a LED headlight a few BUCKS. I also wanted to change to a LED headlight(with a halo ring) but could NOT find a adapter or bracket that would work. I found this on Amazon www.amazon.com/gp/product/B088LY5MYP/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 . it's a headlight bucket,, but you can mount the LED headlight in the INCLUDED bracket and put that in the original SUZUKI headlight bucket. you don't need the bucket or the faceplate from the item. FIT PERFECTLY. and it cost about half the price. plus you only have to wait a few days for it to arrive. or you could just use the entire NEW bucket. your call on that. don't go cheap on the bucket, you need to get the METAL one with the bracket included.
Hi Steven, Please visit our website below and take a look at the documentation as well. Let us know if you need any help. www.nextlvlinnovation.com/simba
@@nextlvlinnovation thank you for the speedy reply. SEEMS EXPENSIVE? LOL no no, my friend it's a total A** RAM. the entire thing should NOT cost more then $50 if it's made in the USA. if it comes from someplace like China or Korea $25 tops. the front plate is what 18ga cold rolled. the back plate it 1/8" Aluminum. a good laser cutter can pump out dozens of these a day. throw in a few misc pieces and screws. drop all in a box. ready for shipping. the very least it should include a LED headlight.. you can pick them up for less than $40. and yes they are all about the same they are all made in China..mostly at the same factory. the $200 light and the $40,,made in the same place.
Hi Fred, this is the best solution on the market that allows customers to put a complete LED headlight solution in their stock setup with vertical adjustment. When replacing a halogen bulb with an LED one in the same halogen reflective bucket it will not produce an even light dispersion. You will also not get as much light output. On top of it all you get that customized LED headlight look.
Hello, Here is the link to the adapter that will fit your motorcycle. It should be available this weekend. We are also having a Labor day sale! Www.nextlvlinnovation.com/7m2
Bought one for my C109 after son put one on his C50. There are differences in mounting. But it IS doable with some Disney engineering. The green tabs will be the ONLY mounting, you need 2 1/4" spacers, 2. 3/4 "- 1" bolts and nylon nuts. Tighten securely. Do not install the spring adjuster, it won't be needed. I Also had to bend the bottom of my chrome ring for tilt clearance. I also added 9/16 urethane foam weather strip to the ring to close off the gap and help keep water out.
Thanks Patrick for this helpful information and your ingenuity!
2004 Suzuki Intruder VL1500LC 7" adapter needed... Thank you!!
There are many people out here that would like to buy something of the animal. But, the production lines seem to be catering to Harley Davidson....
Help us in the 🇺🇸.... Thank you
I will look into this.
EXACTLY what I was looking for. Ordering now!
were did you get 7" adapter for boulevard c50?
2007
This is amazing! However, why not make it as affordable as the other adapters? I have a 2001 Kawasaki Vulcan 1500, and THIS is the only way to make the led light fit, but at $105 is almost twice as expensive than the whole set of headlight and fog lights ($60) it doesn’t make sense. All I can find is the other adapter for $20 but that doesn’t fit. I’m stuck.
Hi Dan,
We have worked as hard as possible to make this adapter as affordable as it is. We stand by the quality of our product and will not cheap out on quality to save a few bucks. If you do decide to try our product you will not be disappointed. If you have any questions we are here to help. Thanks and ride safe!
And thats how they get you, and why they charge so damn much!! Cost more than entire projector headlight kit itself including passing lights!! WTF?!?!
@@davidhamilton2671 Hi David, there are a lot of aspects that go into designing and making a product like this that drive cost. Since we are a small company we cannot mass produce this part like how headlights are made.
@@nextlvlinnovation I
@@nextlvlinnovation Buy a 2nd 3D printer...
Do you an adapter for a 99 Suzuki Intruder 1500? I took my headlight apart to take a better look at it and mine has 2 adjustment brackets, opposite sides of each other....
Hello,
This specific adapter will not fit your year of motorcycle and we do not have an option available at this time.
Ok and thank you.
Great video bro. Helped me out tremendously.
I can't see at night without bright on.
Thinking about this lamp but it looked like there is a gap between lamp and ring, is there or does it just look that way?
Good vidio, your instruction has to be easier to understand than the stuff that comes with the light.
Hi Jeff,
There is a minor gap but this is needed for the vertical adjustment and allows air to pass in the bucket to cool the LED headlight.
8s this available for a 1993 Suzuki vs1400glp factory head lamp assembly?
Hello,
I have not tried the adapter with this motorcycle. It does look like it could work. I will test this out and let you know. Please give a few weeks.
I just bought me one cant wait to get it!
Wish i had a discount code
I’m about to buy this adapter I’m just wanting to know with the 2007 Suzuki Boulevard C50. Will any aftermarket led fit with the adapter? I just Tony want to be stuck too high to where I can’t get enough light on the road to see at night or early morning.
Hello,
Most 7in LED headlights will work with this adapter including ones on our site. We have a LED search guide that will step you through what to look for if you buy a light from a 3rd party source.
It fits nice but when I adjust the screw tighter it just moved the headlight higher up I need it more down to light the road. Also stock light has 2 adjustment screws?? This supports one 1
Hi Corey,
The adjustment screw does not need to be tightened all the way. Adjust the screw so that the headlight is pointing in the direction you need it to be (loosen). The second adjustment screw was for left to right adjustment which is needed for halogen lights. LED lights give off an even side-to-side projection due to the lens. I hope this helps
What is the P/N of the kit including the green tab?
Hello Reginald,
This product has been replaced by our 7in model 2 adapter that will cover all motorcycles and then some. Please visit our website. Www.nextlvlinnovation.com and enter your motorcycle information.
Did you come up with an adaptor for C90 Boulevard 2013?
Hello, yes we did.
Www.nextlvlinnovation.com/7m2
Is this product can keep the headlight waterproof or water gonna go in to the back of the headlight where the rest of the bike harness is ?
Hello,
The headlight and wiring in the headlight bucket should be water tight. Water can potentially get in the bucket with the stock setup as well. We have never heard of this being an issue with our current customers.
Hello, I own a 2007 suzuki M50 boulevard. Will your bracket work for my bike ? I am not sure if its the same housing as the 07 suzuki c50..
Hello,
Unfortunately this adapter will not fit the M50 (VZ800) motorcycle. We are currently working on other solutions and should be released sometime this year.
Does this work with a 2006 m50 boulevard?
This will not work on an M50 boulevard due to the oval housing.
2006 Boulevard C90T. Replacing the main headlight with 7" halo using one of your adapters but i would also like to do the same with the auxiliary lights on the lightbar. Is an adapter needed to replace the auxiliary lights as well?
Hi Steve,
We do not sell the auxiliary light holder/adapter but they are sold by other companies and are readily available.
@@nextlvlinnovation Thanks!
@@nextlvlinnovation looking everywhere. not finding it. any suggestions?
@@Buckofats62 i would search for 4.5in led fog light holders. There should be a decent list that pops up.
Do you guys sell the adapter kit on its on ?
Yes we sell the adapter kit on its own as well as headlights.
Www.nextlvlinnovation.com
2004 Suzuki boulevard vl800 any idea of that would fit
Hi,
Is it possible for you to send us images of the headlight assembly and bucket? We would need to see what the current bracket looks like.
Info@nextlvlinnovation.com
Is the adapter set up for a particular 7" brand and model LED, or does it work for all 7" LED headlights?
It will fit most 7" harley aftermarket led headlights. Check out our website documents to see what won't work.
Www.nextlvlinnovation.com/simba
I have a 2003 intruder 1500 we're can I find the trim ring bracket and all the accessories
Unfortunately this will not work on a 2003 VL1500 motorcycle unless it uses a K5 version headlight rim that matches what is in this video.
I have a 01 savage, would you happen to known if I need a 7" headlight or 5 3/4"? I cant find the size anywhere.
@Vanna Meak dude, measure the one on ur bike..the glass, not the housing
Hi what all comes in the install package is it just the adaptor ring will it fit my 2004 800 Volousia Intruder also what is your ebay site addy
Hi Dave,
This comes with the adapter and hardware. The light is sold separately and there are many 7in options out there that fit your style. This adapter will only fit the Volousia VL800 K5 model. I'd recommend going to our website for more information and documents. You can also purchase the adapter there.
Www.nextlvlinnovation.com/simba
Nice Video and the kit looks like good quality. I wonder if there is any kit like this, that fits to the original lamphousing for a Suzuki VL 1500? I didn't find anything yet, but I'd really like to upgrade the light. The H4 bulb doesn't give the best light, eventhough I bought one of the brightest ones on marked...😬
Hello,
What year is your VL1500?
We have a newer version on our website as well. Www.nextlvlinnovation.com
@@nextlvlinnovation
Hi! Built in 1999 with 7" headlight. On your website is only the Boulevard and the Volusia listed.
@@nextlvlinnovation Thanks for your answer. It's a VL1500, built in 1999.
@@phantomF-4 hello,
We do not have an option for this year of motorcycle.
@@nextlvlinnovation Oh, I see.😔 Do you have any suggestions who might have a solution?
Colorado, what's the kit name and part number? Also the LED Band and part number?
Thank you
Jeff,
More information can be found on our website. Www.nextlvlinnovation.com. look for the 7in adapter under products. We also have documentation that can be helpful.
Will this kit work for the s40 boulevard or ls650 savage?
Hello,
We do not believe it will fit either motorcycle but we cannot be 100% sure since we have not tried it.
Do you sell this product for the 5.75 inch? Its for the suzuki s50 boulevard.
Hi William,
Please take a look at the documentation on our website for the 5.75 adapter that we sell. We have not tried this adapter with your bike before but it looks like it could work.
Www.nextlvlinnovation.com/shylah
Nice video! Will you be doing a 6 month or 1 year review of the adapter? Any chance there's one for 2015 Boulevard c50?
Hi Sam, thank you very much! This adapter will fit your 2015 C50 VL800 and more information can be found here:
Www.nextlvlinnovation.com.
It is possible to do a future longevity review. I think it would have to be the 1 to 2 year mark since these parts are all metal and powder coated to protect against the environment so not much will change if any.
@@nextlvlinnovation Thanks for the info. I think this application will get the job done! Have a good one!
I just bought a kit like this for my C50 2007
Hi where an i buy the ring kit for the headlamp i already have the lamp just need the fitting hardeware
Hi John,
This adapter can be bought from our website. Please take a look at the documentation as well!
Www.nextlvlinnovation.com/simba
Please share the link to buy that adapter I already have the light thanks
Hello Ernesto,
You can buy this 7in LEd headlight adapter at www.nextlvlinnovation.com/simba
I bought one along with the passing lights but did not come with the assembly kit for the headlight 🤔
Hi please visit our website to get our adapter. Version 2 will be released in April. Www.nextlvlinnovation.com/simba
I ordered the light but it didn't come with the key ring and mounting hardware, where cam I order the from?
David,
Email me at NLINNOVATIONLLC@GMAIL.COM
The adapter can be purchased off our website: www.nextlvlinnovation.com/simba
Will these work on Morimoto sealed7 1.0 led?
Hello,
This 7in headlight should work in this adapter. The main things to look for are the 3 keys located on the back side of the headlight. We have a document on our website that goes over what to look for. You can send this to the light manufacturer to make sure.
Www.nextlvlinnovation.com/simba
Do you have an adapter for a 2000 intruder vl 1500
Hi Brian,
We do not have an adapter for this year and model of motorcycle.
Is this in stock? Website is a bit confusing
Hi Dustan,
Yes it is.
Www.nextlvlinnovation.com/simba
any idea if the adaptor fits a 2013 C90 Boulevard ?
Hello Malek,
This adapter will not fit this motorcycle but we are in the process of designing one and should have it available by the end of the year.
I don’t see where u can buy the brackets
Hello,
We are currently out of stock but it can be purchased at the link below. Please add your email to the list.
Www.nextlvlinnovation.com/simba
Where I can get those adapters?
You can find this adapter on our website under 7in Model 1.
The 7in Model 2 can also accommodate newer and older C50 and C90 motorcycles.
Www.nextlvlinnovation.com
I have a 2007 Suzuki boulevard C50 will this work??
Yes, this will fit a 2007 C50. Please visit our website for more information or to buy. Thanks! www.nextlvlinnovation.com/simba
Where did you get the adapter
This adapter can be purchased on our website.
Www.nextlvlinnovation.com/simba as well as the 7in led headlights.
Здравствуйте дайте адрес где покупали комплект установки для лед фары.
You can buy this at the website below.
Www.nextlvlinnovation.com/simba
I have a 2006 intruder 1400 and I am looking for an LED headlight like this be have no luck
No you don't bro. The intruder ended in 2005 and became the blvd.C50/C90. The C50 is 800cc and the C90 is 1500cc. There is no such thing as an 06 suzuki intruder 1400 😢😢 that's probably why you can't find a light for it 🤷♂️
Do you ship to Canada
Yes, we do. When you check out on our website, it will provide you a shipping estimate.
Www.nextlvlinnovation.com/simba
were did you get the headlight adapter for the c50
out of stock on ebay
@@tonysellers2226 these are currently out of stock. We will have more available in 2 weeks.
@@nextlvlinnovation can u call me when you have more
or text
Is there a UK company who can supply this adapter
Hello Douglas,
We do not have a reseller in the UK. All products are shipped from the US.
Where can I get that kit for for the headlight
Hi Charles,
You can purchase the 7" adapter on our website.
www.nextlvlinnovation.com/simba
@@nextlvlinnovation how long would it take to ride to the Jackson county Mississippi
@@charlesnettles767 on average 3 to 4 business days.
@@nextlvlinnovation will it work in a 2003 Suzuki intruder 1500 lC.
@@charlesnettles767 unfortunately no it will not.
Waarom geen handdoekje onder de lamp ,zit nu onder de krassen . Mooie lamp maar ik zou hem er niet in laten bouwen.
The lamp was on a soft leather cover and is one of our demo lights used for installation and testing purposes. A full LED headlight setup gives the bike a nice look and a better light dispersion than LED bulbs.
so very close to what I need, but Honda its mounts on the top and bottom not on the sides.
Hi Philip,
Can you let me know what year and model you have?
@@nextlvlinnovation Honda CB400SF 2011
Need one for a 2003 suzuki vl1500 intruder
Hi Ronald
Please email us at info@nextlvlinnovation.com. we will need to check what bezel you have.
Will this worl with 2014 suzuki c50?
This adapter will not fit the 2014 C50 motorcycle. We are in the process of designing one for this motorcycle and hope to have it finished this year.
@@nextlvlinnovation ok thanks
Will this fit a 2000 Suzuki Maurader vz800?
This adapter will not fit your model of motorcycle. We are looking into it!
Ok thank you, I was going to ask if you had any ideas since I’ve already purchased the led headlight cluster?
I would think the front bezel would be able to clamp onto the new led light but to keep it positioned you may need to drill into the heatsink fins and attach with a bolt.
@@nextlvlinnovation have you this kit for marauder vz800 2003?
@@ManicMelvin We do not, sorry.
Denver CO. My model is a 2008 M50 VZ800Z
This adapter will not fit your motorcycle year and model.
I need one for my Honda Shadow 750 aero
Hello,
What year is the Shadow 750 and do you know if it is the VT750C2B version?
2013 VT750C Aero
So I just recently bought the headlight off eBay and didn’t know I needed a conversion kit to install the headlight. Where can I find just the conversion kit and know I’m not just paying for a picture and hoping I get everything?
Please visit our website Www.nextlvlinnovation.com. Everything is gaurenteed with money back. You can also go through our eBay page if you prefer that platform.
let me save all you Suzuki SV650 owners that want to change over to a LED headlight a few BUCKS. I also wanted to change to a LED headlight(with a halo ring) but could NOT find a adapter or bracket that would work. I found this on Amazon www.amazon.com/gp/product/B088LY5MYP/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 . it's a headlight bucket,, but you can mount the LED headlight in the INCLUDED bracket and put that in the original SUZUKI headlight bucket. you don't need the bucket or the faceplate from the item. FIT PERFECTLY. and it cost about half the price. plus you only have to wait a few days for it to arrive. or you could just use the entire NEW bucket. your call on that. don't go cheap on the bucket, you need to get the METAL one with the bracket included.
Thank you Redhytech, that should do the trick. Unfortunately our adapter does now work with the SV650 headlights so this will be a great help.
Where can I buy this?
Hi Steven,
Please visit our website below and take a look at the documentation as well. Let us know if you need any help.
www.nextlvlinnovation.com/simba
Adapter for motorcycle
$109? WTF? no headlight included? need CHINA to make a knock off for about 1/4 of the price.
Yes it can seem expensive but there are not many options out there and the ones we have found have been double the price!
@@nextlvlinnovation thank you for the speedy reply. SEEMS EXPENSIVE? LOL no no, my friend it's a total A** RAM. the entire thing should NOT cost more then $50 if it's made in the USA. if it comes from someplace like China or Korea $25 tops.
the front plate is what 18ga cold rolled. the back plate it 1/8" Aluminum. a good laser cutter can pump out dozens of these a day.
throw in a few misc pieces and screws. drop all in a box. ready for shipping.
the very least it should include a LED headlight.. you can pick them up for less than $40. and yes they are all about the same they are all made in China..mostly at the same factory. the $200 light and the $40,,made in the same place.
@@redhytech thanks for your input, we have seen people fabricate their own bracket for less but this route isn't for most.
Why pay that much money when you can add an H4 led bulb for under $50?
Hi Fred, this is the best solution on the market that allows customers to put a complete LED headlight solution in their stock setup with vertical adjustment. When replacing a halogen bulb with an LED one in the same halogen reflective bucket it will not produce an even light dispersion. You will also not get as much light output.
On top of it all you get that customized LED headlight look.
My bike VZ800Z. EGG SHAPE HEAHLIGH
Hi Jeff,
I would need to know the bike year as well to know for sure. If you do have the egg shaped headlight then this adapter will not work.
Man I wish it was a little cheaper
We try to keep things as cheap as we can but materials and labor are expensive as well as market drives prices. You won't regret what you get!
Lmao 100$ for some plastic
This is all metal.
$104? Really?
105 DOLLARS, WTF
Will It work on a Suzuki sv650 2007? I want to replace It but without change cover.
Please email us @ NLInnovationLLC@gmail.com. We need more information and pictures.
I have a 2005 and was wondering the same thing? Any word on if it will work?
Will this adaptor fit my 2001 Suzuki Intruder VL800?
This will only for the VL800 K5 model for 2001. You can send us an image of the inside of your light and we can tell you.
Info@nextlvlinnovation.com
@Next Level Innovation yes will do today thanks
Is this fit on Suzuki boulevard c90 2019?"
This will not fit this specific motorcycle. We are working on a solution for this bike and hope to have it released this year.
Will this fit on c90T boss 2013?
Hello,
Here is the link to the adapter that will fit your motorcycle. It should be available this weekend. We are also having a Labor day sale!
Www.nextlvlinnovation.com/7m2
Will this work for my 2000 suzuki intruder 1500vl
This adapter will not work with your motorcycle. We do not have any other adapters that will work either.
Ok thanks