How to Fix Electrolux Zanussi Dryer Leaking Water

Поделиться
HTML-код
  • Опубликовано: 17 ноя 2022
  • A tutorial on how to fix your Electrolux Dryer Leaking Water. Common issue from time to time with Condensor dryers. Applies to most Electrolux heat pump condensor dryers.
  • ХоббиХобби

Комментарии • 15

  • @renetekelenburg5933
    @renetekelenburg5933 Год назад +5

    Thanks! With your tutorial I've fix my dryer.

  • @TheHugoadiaz
    @TheHugoadiaz Год назад +1

    Thanks for tje Video, I had the same problem. Followed your lead and Fixed. The Return line came off due to the pump fell down from the tabs.

  • @simonsears661
    @simonsears661 Год назад +1

    Thank you

  • @S55__
    @S55__ 2 месяца назад

    Thank You!!!! I will try it.

  • @CuppaTCat
    @CuppaTCat Год назад +1

    Great video, so helpful. my pump works but does not drain all the water. I even removed the float switch and manually lifted the mechanism to see if the motor would come on. It did not. Is there a cycle on these machines that only turns on the pump for a period of time? It’s an ultimate care 800 edh803bewn. The water then leaks out the front like in the first part of your video

  • @zhenbincui1958
    @zhenbincui1958 11 месяцев назад

    Great video. Where is the moisture sensor located please?

  • @kharolina1colombia
    @kharolina1colombia Год назад +1

    Thank you, mine has lint built up in the back of the drum inside. How do I remove that?

  • @kyilewhyte1683
    @kyilewhyte1683 Год назад

    I'm looking for guidance on how to replace a belt in a Electrolux EDP2074PDW

  • @adrianavera7434
    @adrianavera7434 7 месяцев назад

    Hello, my dryer is leaking water, can you help me?

  • @adriand1374
    @adriand1374 11 месяцев назад +1

    Hello! please tell me how to do service mode on this model dryer? My dryer just stop after a few seconds and the display thinks it's still going not paused etc. I checked relays and heater only getting sent 12v momentarily then few seconds after dryer stops when motor relay loses 12v . If heater cable disconnected dryer won't stop but heater tested fine no short, thermistor all good etc. When cold heater relay keep clicking as 12v comes and goes

    • @adriand1374
      @adriand1374 11 месяцев назад

      Fixed it I swapped the 2 motor capacitors around now it doesnt cut out. I then put a old cap I had from another dryer and noticed more torque when motor starting. this dryer doesnt start heater right away with cycle so it sent me off track trying to diagnose...

  • @reneegonzalez7982
    @reneegonzalez7982 9 месяцев назад

    Is that too reservoir supposed to be filled with water prior to use?

    • @askmrwashywashy
      @askmrwashywashy  9 месяцев назад

      No the water is taken out of your clothes that’s how it dries the clothes

    • @reneegonzalez7982
      @reneegonzalez7982 9 месяцев назад

      @@askmrwashywashy ok that's what I thought, but there's never any water in the too reservoir, only in the condenser.....

  • @Just.May_May
    @Just.May_May 2 месяца назад