hey that's awesome! I worked on the AMG ONE at mercedes HPP Northampton, I'm a machinist and produced a fair amount of cam shafts and electrical motor drive shafts for them. the work that has gone into these cars is insane. I saw lewis a couple of times too, he's a lovely guy! great work :)
I was looking for resin printed RC cars but RUclips fed me your work. 👍🏾👍🏾👍🏾👍🏾👍🏾 Your work is excellent. Thanks for showing me your filament printed car.
Sorry, but it feels like video production quality is far more superior than a car manufacturing itself. You gotta put more hours into working on the body and materials to make it look cohesive. Good luck.
Not sure what you are asking, printed in pla+, glued with super glue and painted first plastic primer spray and than finished in silver semi reflective spray
I loved the result, I only have one question because I want to do something similar, what are the names of the pieces with which you extend the central drive shaft at 9:51
Great work. I am working n a 3d peintrd F1 2023 RC and it is a pain. You should try to some Tamiya tape, you will get way more crisp lines when painting the bodies that way. Excellent work.
Ballberings for the spoiler??? Could be a little to much... But at the end you created a very nice model nearly without any of visible layers from the Printing.
@@MrGoodcat1What i ment was whether you modeled it yourself. If yes how. With blender, plasticity or something else. I’m currently looking for a good tool for the modelling
This looks amazing!! May I know what glue you used for the 3D printed parts to stick so well? Also, did you use acrylic paint for the black painted parts or is that some other type of paint?
Hi , you did an amazing job. By the way , i cant find the parameters to print this model. What layer , speed , temp, filament etc... Can you tell us please because it looks so clean your printing . Thanks
I used Esun PLA + filament with 210c with additional fan to my printer. Slicer is Cura, but the parameters are individual for every printer. I'm using Snapmaker 2.0 A350 printer
This car looks like a pakistans luxury car. A lot of effort and it was killed by bad print details post processing :( It is so sad it could be great work
@10:40 Hear me out on this one... Gold Marker Pen held against the wheel while it is spinning 😏 ( that paint job with the Brush and the Stencil was _atrocious_ ) Also why not continue using Spray Cans for all of the black Parts too? You were masking the parts off anyway... Might as well use the much more superior method over Brush Paint 🤨
@@MrGoodcat1 у меня много опыта с rc cars. И какие удары знаю бывают. А ваш напечатанный кузов это хрупкая вещь. Не гнется. Сразу сломается. Красиво но не эффективно. Для полочки для красоты.
that is awesome, for smaller details, a resin printer might be better since you would not need to sand it down, which would mean that you can retain the detail straight from the print, but it is amazing the amount of detail you got with and FDM machine
@@MrGoodcat1 I don't think this is at all true and honestly can't find anywhere thats says it is. Im not saying you're wrong, it just doesn't seem correct. both sla and sls printing should have much better resistance to deformation then fdm printing with pla.
Lol I thought there was going to be a lightning McQueen type intro missed opportunity I am speed 3d printed speed You might want to reinforce that middle seems like it might be a weak point in my experience I've had rc cars crack in half with a head on crash
amazin work, but you need to improve your 3d print quality, its going to save your a lot of time in post procesing with also a bether final resoult. congrats anyway
As great as the editing is, you definitely would have a lot more nerds on your side if you had the sound of the engine as the 2015-16 class formula 1 race car.. Last I heard, that's what the engine is SUPPOSED TO BE in this particular case. Sound for car nerds is one of the most important factors when it comes to this stuff.
wow! beautiful ... I hope you will make a Ferrari sooner or later ... if you can take a look at my channel I modified them a Ferrari Enzo RC ... great work anyway ... I want to replicate it
hey that's awesome! I worked on the AMG ONE at mercedes HPP Northampton, I'm a machinist and produced a fair amount of cam shafts and electrical motor drive shafts for them. the work that has gone into these cars is insane. I saw lewis a couple of times too, he's a lovely guy! great work :)
Wow, that's amazing dude 😲 nice to hear from you ✌️
That’s amazing
I was looking for resin printed RC cars but RUclips fed me your work. 👍🏾👍🏾👍🏾👍🏾👍🏾 Your work is excellent. Thanks for showing me your filament printed car.
holy smokes!!!! that looks amazing
Thank you 🙌
WoW! Amazing mad skills. I know i can only dream about having such fine skills.
Thank you 🙌
Very nice work ! Congratulations!
Thank you 🙌
6:15I love this bowl.
haha 😂
Please do a print for Mercedes 300 SL!!
best 3d printed rc car ever
Thank you 🙏
Very underrated channel. You are so talented, I am professional Cad designer. And I really appreciated what you did. Belissimo
Thank you 🙌 i'm also learning cad design and simulation)
I follow next car.
Dude wow! nice work!
Thank you 🙌
Wow, best rc body build yet🔥🔥🔥 #beautiful😎
Thank you 🙌
Can you 3d print Aston Martin Valkyrie amr pro pls it is my favourite car
At the moment i'm already working on a new car, maybe in future.
Very nice video and result!
Thank you 🙌
that is very cool but try to use better motor and batery.
I really want a 3D Printer
Sorry, but it feels like video production quality is far more superior than a car manufacturing itself. You gotta put more hours into working on the body and materials to make it look cohesive. Good luck.
I have no idea how you have only 4k subscribers, you look like u have atleast 500k, Is it for sale?? i want it so bad
It is for sale but only STL file (digital version) you can print it if you own 3d printer
brother can you share what marterial you used in your background. gray & white combination was so cool. plz suggest me & where it to buy ?
Not sure what you are asking, printed in pla+, glued with super glue and painted first plastic primer spray and than finished in silver semi reflective spray
@@MrGoodcat1 thank you for your reply. i want to know the surface material which you used in your background.
@@mohammad_rafiq that's a non reflective vinyl wrap
I loved the result, I only have one question because I want to do something similar, what are the names of the pieces with which you extend the central drive shaft at 9:51
Great work. I am working n a 3d peintrd F1 2023 RC and it is a pain. You should try to some Tamiya tape, you will get way more crisp lines when painting the bodies that way. Excellent work.
Thank you 🙌 I'll try that
4:35 which type of colour you're using ... Plz let me know
It's acrylic black paint
@@MrGoodcat1 thank you 😊
Ballberings for the spoiler??? Could be a little to much... But at the end you created a very nice model nearly without any of visible layers from the Printing.
Thank you 🙌
You are probably already working on something new but Apollo IE would be cool to see ✌️
Didn't knew that car, looks amazing, I'll do it in future 👌
Amazing work !
Thank you 🙌
WOW this video was so fun to watch! I really enjoyed it thank you.
Thank you 🙌
Impressive make Koenigsegg now also will be very good for your channel
Already working on Koenigsegg)
Then please install brush less onto that or I'm unsubscribing you
where did you buy the micro leds ? tks
Ebay. Better choices on aliexpress
Those plastic waste reusable ?
No
hello, your LEDs are great, they are very small, what type of LEDs are they
Hello. It is Pre Wired 0402 LED
I love this! This gives me hope that I can at some point print my own rc car.
Really cool content. Would you mind to share how you get to your car chassis
Thank you. It is included in car model
@@MrGoodcat1What i ment was whether you modeled it yourself. If yes how. With blender, plasticity or something else. I’m currently looking for a good tool for the modelling
@@erdemkoc169 i have modeled it in Houdini, but now i learned fusion360 and it is much easier to model in fusion360
@@MrGoodcat1 thanks for the reply
This looks amazing!! May I know what glue you used for the 3D printed parts to stick so well? Also, did you use acrylic paint for the black painted parts or is that some other type of paint?
Yes, black paint is acrylic and for glue i used Akfix 705 super glue
@@MrGoodcat1 thanks :)
what kind of glue are you using for the resin to stay together?
It's not resin, it is PLA plastic and i use Akfix 705 glue
Really impressive. How do you go about modeling these cars so accurately? You should do a tutorial!
Thank you 🙌 There are lots of modeling tutorials here on RUclips 👌
@@MrGoodcat1 do you model it in Blender or CAD?
@@paulm1237 houdini and fusion360
Can you sell I love beast
digital STL file is for sale
Hi , you did an amazing job. By the way , i cant find the parameters to print this model. What layer , speed , temp, filament etc... Can you tell us please because it looks so clean your printing . Thanks
I used Esun PLA + filament with 210c with additional fan to my printer. Slicer is Cura, but the parameters are individual for every printer. I'm using Snapmaker 2.0 A350 printer
If you think that these prints look clean i would dread to see what you are pulling off the build plate
@@Caplonky5 i don't think so, that's why it needs lots of sanding, shown in video
Please make 3D printed Mclaren F1
I was going to do that, i'll do it in future
Imagine if you 3d print rims and better mechanism for the rear wing
Aspark owl next? Great video btw 🙏🏾
Even didn't knew about that car:)) Maybe i'll do it in future looks cool
@@MrGoodcat1 ayeeeeee ❤️❤️❤️❤️❤️❤️
Can you 3D print a rc Porsche 918
Will you make in future Pagani Zonda Cingue from NFS Hot Pursuit 2010?
Maybe. I want to make koenigsegg jesko also
Man this is awesome
Absolute masterpiece
Thank you 🙌
Insane amount of effort. Can you do the Mclaren F1 too?
Thank you! I will try that in future
How long it took to print
Roughly 65hours
This car looks like a pakistans luxury car. A lot of effort and it was killed by bad print details post processing :(
It is so sad it could be great work
@10:40 Hear me out on this one... Gold Marker Pen held against the wheel while it is spinning 😏 ( that paint job with the Brush and the Stencil was _atrocious_ )
Also why not continue using Spray Cans for all of the black Parts too? You were masking the parts off anyway... Might as well use the much more superior method over Brush Paint 🤨
Masking and spray painting isn't as easy as it seems) already tried that. Have done golden line wheels on porsche, check it out
Wow,very impressive. I cant even build simple forms,and that is a really awesome looking rc car👍
Thank you 🙌
А быстрее чем пешком она может ездить?
60 km/h
what type of 3d printing tool?
FDM printer is used for body. SLM and SLS for chassis
What program you use to design this cars models?
/ 3:07 what's thay
Not sure what are you talking about. Sending after plastic filler
What program are you using for modeling?
3d scanner and Houdini
1 удар и корпусу хана
Don't be a pessimist
@@MrGoodcat1 у меня много опыта с rc cars. И какие удары знаю бывают. А ваш напечатанный кузов это хрупкая вещь. Не гнется. Сразу сломается. Красиво но не эффективно. Для полочки для красоты.
that is awesome, for smaller details, a resin printer might be better since you would not need to sand it down, which would mean that you can retain the detail straight from the print, but it is amazing the amount of detail you got with and FDM machine
Thank you 🙌 you are right but it will easily melt at sun temperature
@@MrGoodcat1 how would it melt??
@@hamburgerbuns9752 SLS printed part has a very low melting point and outaide at sun it will easily deform
@@MrGoodcat1 I don't think this is at all true and honestly can't find anywhere thats says it is. Im not saying you're wrong, it just doesn't seem correct. both sla and sls printing should have much better resistance to deformation then fdm printing with pla.
Hi,
what application is used to make the design?
Houdini was used
@@MrGoodcat1 ok, thanks
Lol I thought there was going to be a lightning McQueen type intro missed opportunity I am speed 3d printed speed
You might want to reinforce that middle seems like it might be a weak point in my experience I've had rc cars crack in half with a head on crash
wow Nice! I also create 3D Printed RC Trucks and more but I did not get views 😞
Keep it up
assalomu alaykum aka zo'r yasaysiz ideal qayerdansiz
Rahmat. Gruziyadan
Наш слон!!! Кудо очень хорошая фирма и дешовая)
AUDI R8 please
Hello, this is exactly what I want to do. Really excellent, exquisite workmanship.
😍
lc racing: .......
❤
как котика зовут?
Макси
amazin work, but you need to improve your 3d print quality, its going to save your a lot of time in post procesing with also a bether final resoult. congrats anyway
Thank you 🙌
As great as the editing is, you definitely would have a lot more nerds on your side if you had the sound of the engine as the 2015-16 class formula 1 race car..
Last I heard, that's what the engine is SUPPOSED TO BE in this particular case.
Sound for car nerds is one of the most important factors when it comes to this stuff.
wow! beautiful ... I hope you will make a Ferrari sooner or later ... if you can take a look at my channel I modified them a Ferrari Enzo RC ... great work anyway ... I want to replicate it
Got money and Tec but lack of proper talent
Need practice 👌
make a drift car please
BTW I love your vids and I just wanted to say Jesus loves you and he can cure your pain😊😊😊😊
love you..😊
I put a dislike only because of the poor processing of printed parts. The layers of the print are strongly visible.
Ok😂
😂😂🤦♂️
Also poor painting skills
Because print quality was the topic of this video....pathetic behavior
@BigNutsTheodore I am referring to the thunbs down....not the comment
Ты русский? На банке грунтовка по русски написано было
я из Грузии
what type of 3d printing tool?