Это видео недоступно.
Сожалеем об этом.
How to change spark plug on LEXUS RX400h 2 (XU30) [TUTORIAL AUTODOC]
HTML-код
- Опубликовано: 5 авг 2024
- How to change spark plug on LEXUS RX400h 2 (XU30) 3.3 Crossover / Crossover SUV 2003-2009 [TUTORIAL AUTODOC]
Spark plug on LEXUS ES V (XV40) (05.2006-06.2012) / LEXUS ES (XV20, XV30) (08.2001-10.2006) / TOYOTA Highlander I (XU20) (06.2000-05.2007) / TOYOTA Previa / Estima II (XR30) (08.2000-01.2006) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce spark plug: BOSCH; RIDEX; STARK; NGK; CHAMPION.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Spark plug: www.autodoc.co.uk/car-parts/s...
Spark plug for LEXUS RX400h 2: www.autodoc.co.uk/car-parts/s...
BERU Grease: www.autodoc.co.uk/beru/994899...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
LIQUI MOLY Electronic Cleaner : www.autodoc.co.uk/liqui-moly/...
All video and pdf tutorials on LEXUS RX400h 2 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/le...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ ruclips.net/user/AutodocUk?s...
0:00 - LEXUS RX400h 2 (XU30) - spark plug: step-by-step replacement tutorial
9:54 - Unscrew the spark plugs.
18:36 - Install the new spark plugs into their mounting seats.
23:58 - Screw in the fasteners of the ignition coil harness retainer.
🛠️ The tools you need to replace spark plug:
- WD-40 spray
- dielectric grease
- high-temperature anti-seize lubricant
- drive socket no. 10
- spark plug socket no.16
- ratchet wrench
- torque wrench
- telescoping magnet
- Clic-R collar pliers
- microfibre towel
- fender cover
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► LEXUS car repair tutorial - • LEXUS car repair tutor...
► LEXUS RX400h 2 (XU30) car repair tutorial - • LEXUS RX400h 2 (XU30) ...
► How to replace front brake discs / front brake rotors on LEXUS RX400h 2 (XU30) - • How to change front br...
► How to replace wipers blades / window wipers LEXUS RX400h 2 (XU30) - • How to change wipers b...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RUclips: / autodocuk
Instagram: / autodoc_autoparts
Snapchat: / autodoc.uk
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved
![How to change tie rod end / track rod end on LEXUS RX400h 2 (XU30) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/vMicDwV2Stc/mqdefault.jpg)
![How to change tie rod end / track rod end on LEXUS RX400h 2 (XU30) [TUTORIAL AUTODOC]](/img/tr.png)
You forgot to show how to remove the WHOLE WIPER ASSEMBLY to remove the 2 12mm bolts on the back of the Air Intake. It takes about an extra 2 hours and a lot of scars to get there. It's funny how you skip that part in just 2 seconds! The rest was Super helpful.
You don't have to take that whole part off. You have to have a tool that it's going to fit back there behind it
I just finished the whole job and put it all back together, if you take off the bolts on the bottom of those two brackets underneath the car it helps a lot
Anybody who reads this do not take off the full windshield wiper assembly
I know this video is about the spark plug replacement only but the timing belt, the water pump, spark plug, throttle body cleaning can be done at the same time around 90K to 100K miles to reduce the cost and the time taken to remove several components. I would at least clean the throttle body and the MAF at the same time. Thanks for the detailed video!
I noticed you didnt go back under the car to install that bracket bolt in the back of the intake.
Great video. Everything anybody would need to know in order to do this job. This explains why my Lexus dealer charges $690 to do this! Also explains why I’m not going to tackle it myself. I could... Especially with this video... but I’m just NOT. Thanks for the help!
Thank you for sharing your opinion!
I'll change your spark plugs in the 06 400h for $150 😊
Great video, my only suggestion would be to have the cameraman zoom in and zoom out more often on some of those areas that are in deep. It just helps to figure out exactly what was being worked on. I know he did it once or twice, which I thought was greatand appreciate that but he did it for all areas that were in deep. It would really help. Super thanks again.
Wow! Thanks for such a detailed and informative video on replacing the spark plugs! The disassembly and reassembly was very helpful and clearly shown and documented! I’m going to watch the video over and over again until I feel comfortable to start it on a diy project. Thanks again Auto Doc.
Thank you for sharing your opinion with us.
I replaced my back coils and it worked out fine. Thank you for the video. My plugs have been replaced at one time and the last person did not put the screws back on the pack part of the manifold so it made it easy to take that off.
Thank you for your feedback! We're glad you found our work useful.
Excellant work.
Tough job for the newer model cars! Great video.
Thank you for sharing your opinion!
We wish you a Merry Christmas and a Happy New Year!
FANTASTIC ! I HAVE LEARNED A LOT.
Thank you for your feedback!
We are glad to know this tutorial was useful to you.
Stay tuned for more!
Best regards,
Autodoc team !
can you do a rx400h waterpump and timing belt?
Thanks for the detailed info.
Thanks for your positive comment! Stay with us!
I like this video, It would be nice to hear basic narrative while you work. Also I am replacing the spark plugs at a longer interval, 140K mi, Because with the new irridium plugs they always look so great when they come out. FYI the timing belt and water pump were done at 90K. With this video I will be doing this job today and.... Thank you so much for your contribution!!!!
Thank you for your valuable recommendation, we will definitely take it into account when shooting new videos and further replacements of these parts.
Great video. Professional. I wonder what the dealer charges for this service. It's a pretty big ordeal.
extremely thank you for the video
Thank you for your feedback!
We are glad to know our tutorials were useful to you.
Stay tuned for more!
Best regards,
Autodoc Team!
Thank you for your feedback!
We are glad to know our tutorials were useful to you.
Stay tuned for more!
Best regards,
Autodoc Team!
To break the two back bracket bolts, you'll need a long breaker bar and angle it on a small 12mm wrench. You cannot get enough leverage otherwise.
Very good good live 1.👍
Thanks for your positive comment! Stay with us!
I know this will probably never be seen. However, am I supposed to change the throttle body gasket and intake gasket? I figured I would ask since I didn’t see them changed and rubber gaskets get old and hard with age. Thank you. Absolutely great video!!!
Yes, when performing work, it is necessary to change the gaskets and seals.
Thank you so much for your reply! Before I tackle this job. Can’t I just remove the wipers, linkage, and rear cowl? So I don’t have to remove the intake.
Very helpful this video clip 👌,
I would like to know what you do or what you disconnect when you go under the car ,it was not clear ,please explain.
Thank you very much.
Please specify the time of the fragment in the video.
Next time, is it possible to show me how you took off the 2 bolts from the back of the intake manifold? That's the most tricky part and you left it out. Thanks.
Thank you,
we will definitely take this into account in our new videos.
Best Regards,
Autodoc team
Thank you, we will definitely take this into account in our new videos.
Best Regards,
Autodoc team
Fr it’s the only part that is challenging
Hi, Did you unplug the 12V battery? Please advise. thanks
When replacing spark plugs, there is no need to disconnect the battery.
AUTODOC
At 12:58 you did not take out the bolts from the back of the intake plenum. Neither did you screw them back on. Guestion is : why?
@13:04 I noted they point out the location of these for reference. They do show taking the one off the side. There's a possibility this vehicle was serviced before by a less able mechanic that never put them back so they couldn't show what wasnt there.
What is it your doing from underneath the car at the end of video? Thanks
It is not possible to answer your question for sure.
Are you UK based and where is this workshop? Need lots of work on my Rx400h from a reputable and knowledgeable place like you guys
We are based in Germany, in Berlin. All information about us you can find at this link on our website:www.autodoc.co.uk/services/company
Can you tell me exactly what are you doing going under the engine to pull something at 9:35? Thank you so much.
Thank you for your comment!
Unfortunately, we do not have this information.
Please feel free to contact our Customer Support team and we will be happy to assist you,.
Best Regards,
Autodoc team
Thank you for your comment!
Unfortunately, we do not have such information.
Please feel free to contact us if you have any other questions.
Best Regards,
Autodoc team
He is just loosening one of the fasteners that’s hard to reach from the top. If you slow down the video or replay a few times you can see the wobble extension with a swivel socket turning the fastener loose.
The hardest screws you blow through it in 15-20 sec… how do you get the the 2 screws in the back of the intake manifold?
There is no way to answer your question, you can find this information in your vehicle's technical repair documentation.
You didn't show how you removed the 14mm and 12mm fasteners at the back of the intake plenum... 😂
Thank you for your attention to the details.
We will check and fix this in our future videos.
AUTODOC
Why is there no region for the United States on the app? Love his channel thou because im a do it yourself kind of person
Thank you for your comment.
Please contact our Customer Support team and we will be able to help you in placing the order on our website.
Best Regards,
Autodoc team
How we should know that the spark plugs need to be changed? is there any symptoms on the engine function that should know that the spark plug is dirty or need to be changed?
As a rule, the engine starts to run unevenly, power is lost and fuel consumption increases.
AUTODOC
Good 👍👍👍👍👍👍👍
Why did you not replace the coils. Or clean the EGR valve. Once going back into that area I would never want to have to go back into it again
Thank you for your comment, we will certainly take into account your wishes when chooting new videos.
Best Regards,
Autodoc team
I would have definitely replaced ignition coils & PVC valve, and cleaned EGR as well. Very good point my friend.
👍
Too bad that the video did not show when the technician get down below to get the 3 screw from the back of the air intake manifold as it is tight spot. We do not know how can them be remove. I did all the thing from the top but find out that it still sticking as the 3 screw can not remove. it should be explained to the viewers that the vehicle need to be lift up high to get access instead he only point out the spots. I like all other video and they are helpfull. But this one I have problem with it.
Thank you for your comment.
We will try to fix it as soon as possible.
AUTODOC!
Which other video u suggest...Thanks
Can any coil go in any hole
Yes, all the coils for that model can go in any hole.
Buddy took the plenum mounting bolts out but didn’t put them in 👀 #weightreduction
you did,t
show main thing how to unscrew manuford back 3 bolts😂
thansk to show easyer ones😂😂
This video is for informational purposes only and does not guarantee a specific result. It is recommended that installation be carried out by highly qualified professionals to ensure the best results.
Oh man so the intake has to come off and I have to watch this video like 3 times
Please, show how to replace fuel pump on this vehicle.
Unfortunately we do not have this video. Suggested videos on your car model in this playlist - ruclips.net/p/PLWep5LzT0sxk8OmM4y8Pk_Ep4bXMqtgBR
I came here to scan the video for the part where they get at the rear intake manifold support brackets and they literally skipped only that part!
Thanks for the clarification, we'll think about what we can do with this in new videos.
Humm... it didn't make the triangle red light go away....:(
Without proper diagnostics, it is difficult to say something, so we recommend contacting the service.
AUTODOC
this is not a real portrayal of how its done, there was not a single *&%^ in the whole thing
Please clarify or rephrase your question.
AUTODOC
26 Nm torque broke the spark plug
We are sure that your comment will be useful to many of our viewers.
Wth are you doing