faulty Alarms sounding caused by Power cut in Congleton (West Heath)
HTML-код
- Опубликовано: 21 авг 2024
- this is the second power cut in Congleton today. The first one happened in the east of Congleton near bromley street knocking out power to over 700 homes. the one I filmed was in West Heath but I was pretty localized with a small number of houses with no power. I think I missed the best part of it as I could hear alot more of them. I only new about the outage after the lights dipped for 1 second and loads of alarm bell boxes started sounding so I knew it was a nearby outage. that's all I could fined this time.
When there's a power cut in the neighborhood you can be sure one of the alarms going off will be a Ventcroft!
Very interesting! I love seeing bell boxes going off! Especially older ones
I bet you didn't last a minute
???
@@NextbotExpert 💀💀
Hello alarmmuseum! I just uploaded a video in my channel that is called "an alarm is going off in a red building (CLOSED) And It might the power went out or something and I dont know the model of the alarm That I uploaded at my channel. If you know the model, please tell me at my comment (on video)
3:01 i like this box
0:31 I like these
2:20 that always happened to our accenta g4 it sounded exactly the same
Yep. Any alarm really when the battery is almost completely flat. That bell box is a Kinetic AZTECH 2000.
My naibour^s alarm goes off all the time I bet it will go off today
one of them sound like a frigin bird singing
so where are the people to turn the alarms off
It isn't possible to do this in this situation when there is a power failure. As the main battery is dead, the whole system is dead aside for the bellbox siren. So the occupants will have gone to their panel to type in the code only to be faced with a completely dead panel, despite their bellbox ringing outside. Unless you're prepared to get a ladder up there's no turning it off.
@@harrybroughton4999 holy shit that is horrible to go through
The one at the start of the video is my favorite
I hate Ventrcrofts they sound so creepy.
How i know the powers gone off at least.. Unless I'm working down the shed... Then everything just straight up dies, and I'm just staring at blank screens in the dark.
I've heard that kind of alarm 🚨
They aren’t faulty it’s a failsafe
Power Going To Break The Alarm Piezo Like That If It Keeps Doing Failsafe On And Off
I’ve never heard of an az tech 2000 do you mean sonade 2000?
He meant Kinetic az tech
Where are these roads
probably be better if it had no batt at all to prevent this from happening
Sounds like nee nah ne nah
How are you?
I'm very good thanks xo.
G'day
Did the first ventcroft have power
No power from panel. It was using its own backup battery.
@@joshwestwood3727 the 2nd ventcroft’s house was creepy
2:24sick beat
Alarm burglary
Weolwol
Age in vid: possibly 18 or 17: Type: Kid
Does AZTECH 2000 have Pyronix sounder or texecom
Kinetic. The company who made these is Kinetic. Tried using a piezo on a texecom odyssey bell but didn't work. Must be on a kinetic only. The current az tech bell you can find is the aztech 120, 220 and 320. This was the old model before it. They are prone to faults and had to remove some more than most bells. Had to change my grandads bell after it was faulty. It was only 12 years old! That's terrible age and looked tired. Still loads of Az tech 2000s around.
@@joshwestwood3727 oh it’s kinetic sounder
@@joshwestwood3727 cool would love to see more alarm videos
@@joshwestwood3727 when the power went out did the Aztech have power
@JoesMastsAndCarsAndAlarmsAndGames from the Backup battery inside the bell box. Yes. It can be switched on or off using a jumper. Sounder time can be changed using another jumper. 5 seconds, 9 minutes and 15 minutes. The third jumper is SAB/SCB operation.
dumbest alarms ever
Texecom odyssey 3 the best