For some reason that escapes me, the instructions for the Amazon rocket stated to tie off the parachute 3/4" off the base of the cone directly to the shock cord. I got ahead of myself and tied the chute to the cone, and I'm just going to leave it that way, same as you. I've built several rockest over the years and never tied the chute to the shock cord. Great job on the video, thank you for taking the time to produce a step by step video.
Thanks. I wished there were more of these when I was getting back into rocketry two years ago. That's why I decided to make some. Sometimes it's better to actually see it done.
I guess the hole is too small in the nosecone to get the chute cords through once the shock cord is in there. Only reason i can think of. Should work the same either way.
Back when I was into Estes rocketry we didn't have all your simplified easy, peasy things in the kits. We had to make about everything including the fins and nose cones. We got plain cardboard tubes and learned to shape the fins and how to mount them. Made our parachutes and had to use "flameproofed" tissue paper to protect them from the expulsion charge. It is so easy nowadays...guess the artistry of doing it yourself is long gone.
I remember hearing about the early days. When I started in the 80s, we had pre-made tubes, plastic nose cones, and "die-crushed" fins. So I missed out on the real, real craftmanship part, but at least got in before the super simple plastic part. I did build one from a Christmas wrapping paper roll and cardboard and whatnot I found around the house. It didn't fly great, but it flew! In fact, my Level 1 certification rocket was scratch-built from 3" mailer tubes, thin plywood for fins, and a nose cone made from wooden coffee stir sticks bent and glued into a nosecone shape. I have 2 old kits from the 80s, never opened, that I want to sit down and enjoy building. Enjoying the build is a real part of the hobby, especially during winter. I can also see where some people don't have the skillset built quite yet and need to start out simple.
Just built one. I used gel type super glue for everything. Less mess and quicker dry. Just pre-mark the alignment of the launch rod clips on the tubes so you can set it quickly before the glue dries.
Hi there EpicRoketry, could you tell me about the fuel and launch system please? Does the kit come with fuel or is it a separate thing to buy? I’m completely new to this and my boys would like to try a rocket launch kit for a bit of fun. I will be supervising.
Sure, these rockets take solid fuel motors that you can easily get wherever you find the rockets. The kits usually don't come with the engines. With this kit, you'll also need a pack of engines(B4-2 for the Amazon and A8-3 for the Crossfire), wadding, and 4xAA batteries for the launcher. A good resource is www.rocketryforum.com Plenty of experienced folks there that can answer any question you have.
Preferably a glue made for bonding plastic to wood/paper. Maybe a Gorilla glue or something similar. Check the package to see what it bonds. "Hot glue" should be avoided.
Yes it comes separate and yes it's necessary. Otherwise your chute would turn into a lump of melted plastic upon ejection the first time you don't use it.
After the body tube is assembled, it is attached 1 1/2" or 3.8cm from the top of the tube. This is where the nose cone slides on so it has to attach just inside a bit to leave room.
A common place is a large park or field, or with a local rocketry club. Depends on the laws where you are, but this link is a good start. www.nar.org/safety-information/model-rocket-safety-code/#sitedimensions
For a cheap keychain camera, a couple wraps of painter's tape works just fine for this size rocket. Some people have just used velcro, but I prefer a few wraps of tape. Painter's tape is like masking tape but not as sticky so it won't pull the paint off when you remove it.
John, you really need to chill out some. I mean, you mentioned your concern about a razor sharp scalpel in the first video...twice. Did you notice how safely he used his crafting knife? Again, if you don't like the use of the knife then don't use it on your build. If you want to use something else to open your bag...then by all means feel free.
TheEnderman36YT If the glue you're using has a warning label, or you just don't want to get it on your hands, then it might be a good idea. Always read the warnings on the back of any adhesive you use as some may cause skin problems if you get it on your hands often. Epoxy is a 100% gloves example.
@@Malikot3 yeah you gotta hit those hot points and wrap it up son. Nobody has time for this video. I didnt thumbs down just left this comment to get you to tighten it WAY up. How many people like me you snoozed into oblivion. There should be a support group. Good Gawd.
@@Pcamacho911 Its simple. Skip forward to the part you need to see. Have you figured that part of RUclips out yet? I make $0 from these videos. Nothing. I'm not a RUclipsr. I posted a long form video as some people prefer that. The rest can skip to whatever. I made this video 8 YEARS ago. GOOD GAWD yourself. Seriously. What kind of entitled brat complains on an 8 year old video that someone made for free to help some people out? I suggest you go watch Skibidi toilet videos as thats more your style apparently
For some reason that escapes me, the instructions for the Amazon rocket stated to tie off the parachute 3/4" off the base of the cone directly to the shock cord. I got ahead of myself and tied the chute to the cone, and I'm just going to leave it that way, same as you. I've built several rockest over the years and never tied the chute to the shock cord. Great job on the video, thank you for taking the time to produce a step by step video.
Thanks. I wished there were more of these when I was getting back into rocketry two years ago. That's why I decided to make some. Sometimes it's better to actually see it done.
I guess the hole is too small in the nosecone to get the chute cords through once the shock cord is in there. Only reason i can think of. Should work the same either way.
Thank you for doing this. The instructions on parachute attachment had me stumped.
Back when I was into Estes rocketry we didn't have all your simplified easy, peasy things in the kits. We had to make about everything including the fins and nose cones. We got plain cardboard tubes and learned to shape the fins and how to mount them. Made our parachutes and had to use "flameproofed" tissue paper to protect them from the expulsion charge. It is so easy nowadays...guess the artistry of doing it yourself is long gone.
I remember hearing about the early days. When I started in the 80s, we had pre-made tubes, plastic nose cones, and "die-crushed" fins. So I missed out on the real, real craftmanship part, but at least got in before the super simple plastic part. I did build one from a Christmas wrapping paper roll and cardboard and whatnot I found around the house. It didn't fly great, but it flew! In fact, my Level 1 certification rocket was scratch-built from 3" mailer tubes, thin plywood for fins, and a nose cone made from wooden coffee stir sticks bent and glued into a nosecone shape. I have 2 old kits from the 80s, never opened, that I want to sit down and enjoy building. Enjoying the build is a real part of the hobby, especially during winter. I can also see where some people don't have the skillset built quite yet and need to start out simple.
Just built one. I used gel type super glue for everything. Less mess and quicker dry. Just pre-mark the alignment of the launch rod clips on the tubes so you can set it quickly before the glue dries.
I built without gluing the fins.
It is flying very well and can dismantle for travel.
Thank you for the video. we bought one and your build was a relief for me. I can do this now.
Glad I could help.
I brought one of these and customized like a SpaceX rocket i will send a video out when i launch
Hi there EpicRoketry, could you tell me about the fuel and launch system please? Does the kit come with fuel or is it a separate thing to buy? I’m completely new to this and my boys would like to try a rocket launch kit for a bit of fun. I will be supervising.
Sure, these rockets take solid fuel motors that you can easily get wherever you find the rockets. The kits usually don't come with the engines. With this kit, you'll also need a pack of engines(B4-2 for the Amazon and A8-3 for the Crossfire), wadding, and 4xAA batteries for the launcher. A good resource is www.rocketryforum.com
Plenty of experienced folks there that can answer any question you have.
I had the same confusion about the parachute.
I’m still confused on how to do the prepare engine step
Oh shit a giant rocket
Can I use wood glue or hot glue for all of it?
Preferably a glue made for bonding plastic to wood/paper. Maybe a Gorilla glue or something similar. Check the package to see what it bonds. "Hot glue" should be avoided.
Does wadding come desperate and is it necessary
Yes it comes separate and yes it's necessary. Otherwise your chute would turn into a lump of melted plastic upon ejection the first time you don't use it.
Is there anything that can be substituted for the wadding? I have everything ready to go except for the wadding 😢
Is the shock cord attached to the upper or lower tube?
After the body tube is assembled, it is attached 1 1/2" or 3.8cm from the top of the tube. This is where the nose cone slides on so it has to attach just inside a bit to leave room.
Upper near the nose
Where do you launch it?
A common place is a large park or field, or with a local rocketry club. Depends on the laws where you are, but this link is a good start. www.nar.org/safety-information/model-rocket-safety-code/#sitedimensions
Can you use wood glue for the entire rocket
Wood glue may not adhere very well to the plastic parts. Better off with Testors plastic cement or good 'ol Gorilla Glue.
Fell between the trees. Would have been unfortunate if it got stuck in one of them on the first launch. I lost my share of rockets to drift.
Can u use it more then 1 time ?
Yes
does it come with an engine?
You have to buy those separately, but the website and the box should tell you which kind.
What glue do u use
what kind of glue did you use?
Wood glue and plastic cement.
Can you use wood glue for every part
Yourpositivenow did it work for you?
how do you attach the camera?
For a cheap keychain camera, a couple wraps of painter's tape works just fine for this size rocket. Some people have just used velcro, but I prefer a few wraps of tape. Painter's tape is like masking tape but not as sticky so it won't pull the paint off when you remove it.
i just built that rocket
I built the whole thing and then realized I didn’t have the 🧨
Hi you are doing very good so you can join. NASA maybe but I am not from NASA
Do you really need a razor sharp scalpel to open a simple plastic bag??
John Newcomb no, but it was handy.
John Newcomb do you need to be so worried about how he opens bags?
John, you really need to chill out some. I mean, you mentioned your concern about a razor sharp scalpel in the first video...twice. Did you notice how safely he used his crafting knife? Again, if you don't like the use of the knife then don't use it on your build. If you want to use something else to open your bag...then by all means feel free.
Aaannd why did you need gloves?
TheEnderman36YT If the glue you're using has a warning label, or you just don't want to get it on your hands, then it might be a good idea. Always read the warnings on the back of any adhesive you use as some may cause skin problems if you get it on your hands often. Epoxy is a 100% gloves example.
Glue
Unwatchable. Good gawd.
Care to elaborate?
@@Malikot3 yeah you gotta hit those hot points and wrap it up son. Nobody has time for this video. I didnt thumbs down just left this comment to get you to tighten it WAY up. How many people like me you snoozed into oblivion. There should be a support group. Good Gawd.
@@Pcamacho911 Its simple. Skip forward to the part you need to see. Have you figured that part of RUclips out yet? I make $0 from these videos. Nothing. I'm not a RUclipsr. I posted a long form video as some people prefer that. The rest can skip to whatever. I made this video 8 YEARS ago. GOOD GAWD yourself. Seriously. What kind of entitled brat complains on an 8 year old video that someone made for free to help some people out? I suggest you go watch Skibidi toilet videos as thats more your style apparently
How do you attach the rocket to the rod?
Each rocket should have a launch lug, that the rod will slide through. Like a small section of a straw, or small plastic ring attached to the side.