How to Install/Replace a Timing Chain - MQB Audi A3 2.0t
HTML-код
- Опубликовано: 17 окт 2024
- How it going BDT Fam?
We have a huge video for you today! We are replacing the timing chain in our 2.0t mqb a3! We are definitely early on this job, but we have a leak that needed some TLC, so while we are in there we might as well do the timing chain.
While we encourage everyone to get their hands dirty, this job is definitely
for those of you who are advanced and ready for a challenge. lol Hopefully this video can give you the confidence and guidance you need to complete it successfully!
Let us know if you have any questions or if you need any clarification.
Thank you for watching and supporting the progress!
Make sure to stay #BDTTuned until next time!
#Audia3 #mqbtimingchain #mk7timingchain #MK7 #Audi #VW #MQB #Maintenance #TimingChainReplacement
______________________________________________________________
Tools:
www.ecstuning....
www.ecstuning....
www.ecstuning....
___________________________________________________________
🏁Check Us Out!🏎💨
🚨 Website: boostdynamictu...
🚨 Facebook: / boostdynamic. .
🚨 Facebook Group: / boost. .
🚨 Instagram: @BoostDynamicTuning
🚨 Tiktok: BoostDynamicTuning
____________________________________________________________
great video, maybe next time you can insert images of the tools we need, i know it can be done without some speciality tools, but us noobs need to get all the tools sometimes.
also what happens if it jumps timing?
and what year range is this video good for?
Awesome video! Would like to have seen what the cam phaser adaptation numbers looked like afterwards though 😋
I must say the edit and flow of this video deserve way more subscribers than you have props sir this is a banger video
@vdub819 thank you! One day I'll pop off lol
Great video, very informative! I have to do a lower timing chain cover on mine and this is going to be my reference point 😀. One question: Isn't the harmonic balancer seal PTFE? I think I saw you lubricated it and I have read those are supposed to be installed dry so I'm wondering what to do here to avoid leaks in the future? Thanks for the video and I'll forego the T shirt given how far away I am.
How did you get the flat plane piece off of the timing chain?
The 2 lower mount bolts, can you re-use those bolts? If not, where can I purchase them from and the torque specs as well?
If they're torque to yield... meaning you out a 90-degree turn on it. Those ones you can't reuse. If it's just a torque spec no degrees, then yes, you can reuse. Just out blue loctite on it.
Thanks for the very informative video. I have a 2017 Audi A3 with the base 2.0 TFSI, When would you recommend a timing chain replacement? 60.000 Miles? James from Canada 🇨🇦
Not a problem! Glad I could help.
I would look into vcds and look at cam phasing
It's not really a mileage based thing. It's more jusy the comments getting old and wear.
how much would it cost ? and how much time ?
Going to do the lower timing cover do I need to remove upper motor mount? Or can I get away with coming at the all the bolts from the bottom ?
Should be able to get all the bolts from the bottom. Now the upper timing chain cover would require engine mount removal.
Is this the same as an S3 engine?
@@jasonjay7650 yes it is
How do i get all the replacement bolts
so in alldata it says after performing work on the chain drive the adapttation value in the ecm must be adapteded is this correct or is that why it has the long crank and will it adapt itself? i have a head gasket job that i am thinking of sending elsewhere over this any responce would be greatly appreciated.
Yes you need to erase the adaption. It's not mandatory but should be performed. It's not an easy job that's for sure.
Do you have to run any timing chain adaptations on vagcom afterwards?
Odis states to do a cam gear test. Which simply resets adaption. You can do this with vcds. Personally do you need to? No. I've done it both ways never saw differences
great information video. hopefully catches some traction for viewage
Just here to help the people. Hope you enjoyed the content.
Requesting more B9 S4/S5/SQ5 hardware/performance/and especially maintenance items install.
OH, we have A LOT in store for you coming shortly for the B9 Platform. Which videos are you looking for first?
@@boostdynamictuning mostly maintenance items in my opinion. Considering there’s nothing online, especially videos. Performance hardware/install is very important too, like stock turbo>hybrid is probably the biggest one!:) would be nice address what else is needed when it comes to maintenance.
whats the approximate cost for a dealership to do this job?
This information will be dependent on your State/Shop. You will have to call your local dealerships/Shops to get this information.
Easily 4-5k
Dem t-shirts still available?
is this similar on a 2016 audi 2.0t tfsi ?a3
It will be identical yes
@@boostdynamictuning sweet i’m about to do this for my sister never worked on a newer engine but this vid makes it looks pretty ez with the locking tools
free t-shirt what does it look like?
Lol where is my free T-shirt 😉
Pm me! I got you :)
@@boostdynamictuning what does that pm stand for
@@hjaniel4428 personal message me, you can message me here, facebook and on my website at boostdynamictuning.com
Do i still get a free t-shirt 2 years later 👀
@@immalcolm2417 for sure
Pm me on my Gmail
Boostdynamictuning@gmail.com
Free t-shirt. who how ?
Pm me on Facebook
Let's see if this still stands lol