Why would a 2004 vy be beeping when trying to lock doors like something is open but nothing is trust me slammed the doors open and clock boot and bonnet. will work on the odd occasion battery works on the clicker remote I'm lost is there any ideas I took one of the door sensors out that tells it it's closed and grounded it to the car and fixed it for bit then boom out of the blue won't look doors again
Does your interior light work properly with the doors open and closed? If not check each door sensor and make sure that it is grounding. If this doesn't work it might be the body control module. You could try another bcm and matching key fob.
@@jcdragon77 Interesting, I fitted an LCD screen head unit a few weeks ago so maybe that is the issue. Holden really screwed up on the electronic control modules for these Commodores. Everything talks to everything else for real reason half the time but if one item has problems or is changed all sorts of problems arise. This is not progress. My next car will be Pre 200, probably mid 90's or earlier because you can diagnose and fix any issue with minimal time and cost.
Hey mate, so to confirm an option we want to say yes to, do we press SET or MODE to confirm it? As I don’t want to change all settings just a couple. Does the horn/indicators setting mean when we lock the car the car will or will not beep? Also how did you get the speed to display on the dash when that wasn’t in the settings? Thank you :)
@@jw879 the digital speedo from memory is only temporary when activated from the menu. A permanent digital speedo you need an ALDL cable and compatible software to get into the computer and change the settings from a laptop or smth so it can be turned on permanently. It’s called “police mode” 🙏🏼
I used to own a Holden when I lived in Australia.
thank you ...from my heart
Maaate thank you! ❤
No Problemo
Have a 05 ls1 vz 5.7 6speed manual have problems with it running out of fule an it has a full tank of fule wat could it be
Hi Mate. The fuel pump might be wrong. Sometimes the dash can be recalibrated. Search the Just Commodores forums for answers.
Why would a 2004 vy be beeping when trying to lock doors like something is open but nothing is trust me slammed the doors open and clock boot and bonnet. will work on the odd occasion battery works on the clicker remote I'm lost is there any ideas I took one of the door sensors out that tells it it's closed and grounded it to the car and fixed it for bit then boom out of the blue won't look doors again
Does your interior light work properly with the doors open and closed? If not check each door sensor and make sure that it is grounding. If this doesn't work it might be the body control module. You could try another bcm and matching key fob.
You most likely have a faulty door lock attenuator. Take the door trim off the offending door and replace the lock assembly.
Hi, just wondering if this dash menu appears on the Series 1 VYs as well, or just the Series 2 ones?
Please, I own a 2004. I want to know what battery is suitable for it, how many amps?
Same
Repco by Century Car Battery 68 MF Ultimate Performance. Should fit, just give them your rego.
My 2004 VZ only has a small number of these options, is there a way to access them all like the VY?
@@paul-57 this might help.
www.ls1.com.au/forum/archive/index.php/t-82920.html
@@jcdragon77 Interesting, I fitted an LCD screen head unit a few weeks ago so maybe that is the issue.
Holden really screwed up on the electronic control modules for these Commodores.
Everything talks to everything else for real reason half the time but if one item has problems or is changed all sorts of problems arise.
This is not progress.
My next car will be Pre 200, probably mid 90's or earlier because you can diagnose and fix any issue with minimal time and cost.
@@jcdragon77 That is helpful.
I will put the original head unit back in and turn off all the radio settings and see if that works.
Thanks for the tip.
Hey mate, so to confirm an option we want to say yes to, do we press SET or MODE to confirm it? As I don’t want to change all settings just a couple.
Does the horn/indicators setting mean when we lock the car the car will or will not beep?
Also how did you get the speed to display on the dash when that wasn’t in the settings?
Thank you :)
I'll get back to you you soon. Been a crap few months.
@ no worries at all.
is this a series 2 or 1?
2003 S pac 1 tonner. So probably series 2
How did you get the speed to display on the dash?
Start the car normally, then press the mode button until the digital speed is displayed.
Can u show a vide off it as I tried it a few times, and nothing is working
@@jw879 the digital speedo from memory is only temporary when activated from the menu. A permanent digital speedo you need an ALDL cable and compatible software to get into the computer and change the settings from a laptop or smth so it can be turned on permanently. It’s called “police mode” 🙏🏼