2022 and I am just now watching this lol Blown away by how dang quiet that 17 is... I am very torn on going DAS17 with some 3Ks or a custom wood bow but man... they shoot lights out.
I am very impressed with your skill and knowledge!Your confidence is very evident in your skill set.I am also going to follow your bow platform and your components.I am sold on the Das system.Keep up the great content 👍👍
I finally bought a das 17 inch riser got it today not finished setting it up or tuning yet went out and shot it I'm impressed. I think this is going to be a amazing hunting bow I put my ukhaa sxplus limbs on it. What brace where you running on yours. I bet you sold yours lol mine is the copper one with jd grip. Darren
Paul I'm setting up the same riser.Going with Das 3K med limbs.Hoping for a 60 in bow.My draw is 27 1/2 in. Planning on 40 lb limbs.what could I expect on poundage since they are based on 28 in draw. Smoothness and no stack hopefully.
Can that brass piece that’s on the limb bolt go past the rubber pad and still be ok to shoot? I turned my bolts in all the way bottomed out and backed them out 2 1/2 turns. I’d like to turn them in a little bit more if it’s okay.
Are those limb bolts always supposed to be sticking out the belly side of the riser??? I’ve been running my flush and I think it’s really messing with the performance. Any thoughts
7-1/4 the vx+ tend to like a little lower brace height. Normal uukhas will tend to hold more toward conventional rec limbs and be more around 7-3/4 to 8
Sorry hit button to soon. Having consistency with the Vap so this year going with the Gillo. Depending on how I like that long of a bow to hunt with (I'm a shoot how guy for hunting) I may be in the market for a another riser to hunt with. I was thinking the 15inch of 17inch Das would be my pick of hunting risers. What do you think of the 15inch I know you don't have or have not shot one. Darren
Great video. I will soon be getting a DX5 Bow. How did you mount your quiver on your bow. I plan to get a Bow quiver also but do not know the best way to mount a bow quiver.
Hi I have a Gillo 19inch for my 3d bow and a VAP 13 for my hunting bow. Well my Gillo and me are loving each other but my VAP and I are going to have a divorce. I am having issues with consistency
@@pitbullman4111 things got a little better. Running 285 up front. Trying to shoot .300spine .203" at 52ish# on a 21"dalaa riser gives me 600gr bare shaft. I went up to almost 3/4 and started coming back down twisting my knock down the string 1 turn at a time. Currently sitting at 5/8" again. Switched my heavy springy out with a lightweight 10. But I have no idea if that's a good idea or not. Wore out for today time to quit.
@pitbullman4111 Ah gotcha. I live in a dryer climate, so I don't have many issues with that, but it gives me a lot to think about. I shot off the shelf for a few but moved to a screw in rest.
Great shooting! Currently I am playing around with my 60inch ilf bow with about 20m point on fixed crawl right now but I can't get rid of nock low on bareshafts and It bothers me so much! I am running even tiller, nock height already all the way up to 6/8"(w/ original springy rest). Any advice?? Should I just keep raising my nock height? I even tried negative tiller 1/4 as well. It did't fix the problem. BTW your bow is dead quiet.
I'm usually the opposite. I get nock high bareshafts and just have to live with it. If your bareshaft tips are hitting with your fletch shaft tips you're good to go!
Thanks for the video! Do those limbsavers work? Are they mostly for vibration/sound dampening? I notice for uukha the limbs get thin as soon as they leave the riser so not even sure where to stick them. I've got a das 17 in ILF connection arriving soon for my uukha gobi limbs really looking forward to them.
Have you shot those limbs on your DAS 21? I have a 31 in draw and just about to buy that exact setup for hunting, just debating between the long or mediums... probably the longs, I’d love to get a 17 riser like that but not enough for my long draw... feel like I have so many questions for you regarding those limbs and the 2 das risers haha
@@pitbullman4111 do you think that 17 with the long vx+ limb would work out to a 31 draw? My first ilf rig after only woods and it’s all a bit overwhelming
@@jacobhirst8475 man thats a tough question for a 27in drawer lol. My opinion they would be fine! Bob Smith from Big Stick archery is making 56 inch longbow for guys with 30+inch draws. I don't think you will feel any stacking.
@@pitbullman4111 for the vx+ limbs what das limb bushing did you get for them? I just ordered a das riser but no das bushings came with it, and my vx+ limbs should be here tomorrow! So pumped
Have it ever happened to you that those thumbscrews that hold limbs down would get loose after some shots and rattle ? I'm planning on buying 17" riser for hunting and 3d. Thanks! 👍
2022 and I am just now watching this lol Blown away by how dang quiet that 17 is... I am very torn on going DAS17 with some 3Ks or a custom wood bow but man... they shoot lights out.
Thanks for the great review. I'm close to pulling the trigger on a Dalaa 21" in copper. They seem like great bows.
I don't think you will be disappointed!
I am very impressed with your skill and knowledge!Your confidence is very evident in your skill set.I am also going to follow your bow platform and your components.I am sold on the Das system.Keep up the great content 👍👍
I appreciate it!
I finally bought a das 17 inch riser got it today not finished setting it up or tuning yet went out and shot it I'm impressed. I think this is going to be a amazing hunting bow I put my ukhaa sxplus limbs on it. What brace where you running on yours. I bet you sold yours lol mine is the copper one with jd grip. Darren
Paul I'm setting up the same riser.Going with Das 3K med limbs.Hoping for a 60 in bow.My draw is 27 1/2 in. Planning on 40 lb limbs.what could I expect on poundage since they are based on 28 in draw. Smoothness and no stack hopefully.
Can that brass piece that’s on the limb bolt go past the rubber pad and still be ok to shoot? I turned my bolts in all the way bottomed out and backed them out 2 1/2 turns. I’d like to turn them in a little bit more if it’s okay.
Great video do you happen to know what das bushings would work for converting the uuhka tuulai nature limbs
There are 2 different ones I'm pretty sure the ones for uukhas would be the hoyt conventional ones and not the border
@@pitbullman4111 much appreciated Paul I'll contact 3 river's to make sure
Are those limb bolts always supposed to be sticking out the belly side of the riser??? I’ve been running my flush and I think it’s really messing with the performance. Any thoughts
What brace height are you running with the 17 and uukha’s I’m setting one up myself.
7-1/4 the vx+ tend to like a little lower brace height. Normal uukhas will tend to hold more toward conventional rec limbs and be more around 7-3/4 to 8
Sorry hit button to soon. Having consistency with the Vap so this year going with the Gillo. Depending on how I like that long of a bow to hunt with (I'm a shoot how guy for hunting) I may be in the market for a another riser to hunt with. I was thinking the 15inch of 17inch Das would be my pick of hunting risers. What do you think of the 15inch I know you don't have or have not shot one. Darren
The 15 will serve you well, I've found all the das risers perform really well.
Thank You
Great video. I will soon be getting a DX5 Bow. How did you mount your quiver on your bow. I plan to get a Bow quiver also but do not know the best way to mount a bow quiver.
I'm using a compound style quiver so I can take it off while in the tree
Hi I have a Gillo 19inch for my 3d bow and a VAP 13 for my hunting bow. Well my Gillo and me are loving each other but my VAP and I are going to have a divorce. I am having issues with consistency
Looks like your nock point is really high, maybe that's my problem. I'm about 1/2" now, I'll raise it a little and try again.
I can't remember my current nock height for this rig but I'm normally around 1/2 to 5/8's to start
@@pitbullman4111 things got a little better. Running 285 up front. Trying to shoot .300spine .203" at 52ish# on a 21"dalaa riser gives me 600gr bare shaft. I went up to almost 3/4 and started coming back down twisting my knock down the string 1 turn at a time. Currently sitting at 5/8" again. Switched my heavy springy out with a lightweight 10. But I have no idea if that's a good idea or not. Wore out for today time to quit.
Love my das ilf 21 honestly I think it shoots nicer then the satori and the paint holds up far better.
I 100% agree
@@pitbullman4111 String some beaver balls or otter balls through the string and let me know how it shoots.
@jhonrutger3508 those type of silencers hold water when wet. I tend to stay with cats
@pitbullman4111 Ah gotcha. I live in a dryer climate, so I don't have many issues with that, but it gives me a lot to think about. I shot off the shelf for a few but moved to a screw in rest.
Great shooting! Currently I am playing around with my 60inch ilf bow with about 20m point on fixed crawl right now but I can't get rid of nock low on bareshafts and It bothers me so much! I am running even tiller, nock height already all the way up to 6/8"(w/ original springy rest). Any advice?? Should I just keep raising my nock height? I even tried negative tiller 1/4 as well. It did't fix the problem.
BTW your bow is dead quiet.
I'm usually the opposite. I get nock high bareshafts and just have to live with it. If your bareshaft tips are hitting with your fletch shaft tips you're good to go!
@@pitbullman4111 Dang!! guess i will keep playing around with it until i get my fletched ones and bareshafts group together.
Are you running even tiller? And is your windage set center shot? I'm struggling.
I do run an even tiller. My center shot is center or tip of the arrow sitting to the left edge of the string (for a right handed shooter).
Hey buddy love the video. So you just buy the conversion bushings? And take the limbs from ILF to DAS? Is it that easy?
It's that easy! A little tap from a hammer and you're rocking the das connections on whatever ilf you choose!
Thanks for the video! Do those limbsavers work? Are they mostly for vibration/sound dampening? I notice for uukha the limbs get thin as soon as they leave the riser so not even sure where to stick them. I've got a das 17 in ILF connection arriving soon for my uukha gobi limbs really looking forward to them.
They seem to help a little bit the 623 grain arrow is doing more to hush it up! You should really like that combo!
Have you shot those limbs on your DAS 21? I have a 31 in draw and just about to buy that exact setup for hunting, just debating between the long or mediums... probably the longs, I’d love to get a 17 riser like that but not enough for my long draw... feel like I have so many questions for you regarding those limbs and the 2 das risers haha
I haven't shot them on the das 21 yet! I'm sure they would preform excellent!
Glad to answer any question you may have
@@pitbullman4111 do you think that 17 with the long vx+ limb would work out to a 31 draw? My first ilf rig after only woods and it’s all a bit overwhelming
@@jacobhirst8475 man thats a tough question for a 27in drawer lol. My opinion they would be fine! Bob Smith from Big Stick archery is making 56 inch longbow for guys with 30+inch draws. I don't think you will feel any stacking.
@@pitbullman4111 for the vx+ limbs what das limb bushing did you get for them? I just ordered a das riser but no das bushings came with it, and my vx+ limbs should be here tomorrow! So pumped
Could you give me the specifics on those limbs please. I am definitely going to build my platform based on what you put together.Thank you kindly 🙏
Have it ever happened to you that those thumbscrews that hold limbs down would get loose after some shots and rattle ? I'm planning on buying 17" riser for hunting and 3d. Thanks! 👍
No sir they stay tight. The derlin washers act as lock washers when the bow is at brace
What das bushing did you use for the limbs to convert them?
Most limbs use the hoyt bushings
where did you buy the uukha limbs from?
I got em 2nd hand
Hey! That's cheating having that little strand of string for your crawl! Why did i never think of that!
What is the weight of the 21in.riser? It's not in the specs.
I'll weigh mine in the morning and let you know
@@pitbullman4111 thanks Paul