Bro you are GOATED🐐🔥 my tr2 l2 triggers were both glitched out pressing themselves and also my D pad up button was non responsive i tried the second part where you put a piece of card behind the film and now every single button on my remote works again! You just earned a sub🎉
My R2 and up/down would randomly press even when I shook the controller removing the little foam and adding a piece of a old credit card fixed it, now it back to normal thanks for the video 100% helpful
Yo had a few problems again came back to your vid and the cardboard method worked for me , wanted to thank you again oh and if you can do a video about the keyboard locked at the letter g that'd be awesome, again Thanks man
Hey man my R2 keeps pressing itself and when i press it, it does nothing (only works by itself) please can you help. Another problem is that my controller stick drift is bad. Like it teleports my camera around my screen on fortnite. Please can you help
@HKsystem can you plz help me with L3 and R3 it's 2 controllers one has L3 stick drift and the other has R3 stick drift. No matter in games how high I put the dead zone, it still drifts
For me cleaning the rubber thing fixed it I opened it up tbh im used to it And so far its working Because my controller got to the point every button was putting me back on home screen or my car keeps going on reverse 😂but its fixed thank you sir
@@HKsystem yeah I have my ps5 still in box believe it or not Doing some house work unfortunately taking me a long time😅 Can't wait to put my setup together Also I respect my ps4 it's been through a lot with me
OH MY GOD I watched a lot of videos on how to solve this problem.... But ur solution is the only one worked Now i can play Devil may cry without dante annoyingly changing the swords 😂
Only my r2 keeps activating by itself. Idk if I should go all the way to put the cardboard or just clean the sensor underneath. Can I ask why and how the cardboard would help with this problem? Maybe a little technical answer or the explanation behind this might help
Hello Christa , the reason why we use cardboard is to make sure the ribbon film and mainboard stay tight together so there will be no gap between them and problem will be solve . hope this little explanation helped you out .
@@HKsystemhello! First of all thank you for replying! Initially I cleaned the triggers and it worked but only for like 5 days. I wanna try this method. If you don’t mind, I need some help. Around 1:34 u somehow took the green board apart form the black board, they come out together for me, like I can’t separate them, as if they’re one thing
Thanks for answering again. I didn’t really use my ps4 as much these days, so I left my controller alone for a bit. Now the probes is still there though. So I’m back to this video . I got the controller with the ps4 (which is model is CUH 1216a). I actually took off the controller bar code so I have no idea about the controller model. But I did some research. I think my model might be CUH-ZCT1U, since I saw “JDM 030” on the motherboard. Thanks again… hopefully my controller gets fixed, but thanks regardless for your time
Bro thank you so much!! As many times that I have taken this remote apart to rebuild and fix it. From spare parts. Taking old spare boards and all “. So I never knew there was a riser underneath the main button layout. But I doubled up with a spare from Extra remote parts. and boom I was back in business🙏🏾 Thank you💯
amazing video brother , but it scares me to open my controller ( as in what if i break something ) . is there any way to fix it without opening controller
Hello brother my r2 when i play it its good there is no problems but sometimes it doesnt work when i push it and just work by itself do you think it’s the same problem as the one in this vedio?
hi, open the controller and carefully check all those trace on the Film Flex Ribbon ,to see any damage on in or not , and clean between connector and film .
@@HKsystemhey! My R2 button was just being pressed by itself. but I cleand it and put a card under that pad thing like in the video. But do yk like the white rubber thing on L2 and R2 buttons. I think maybe I changed those two, so now my L2 button is being pressed by itself. After I fixed it my controller worked for a little while. Another thing could be that my Ps4 is jailbroken
@@danialkhan.exe04 no that's not about retail or jailbroken console , just reopen the controller and again change the paper till you find that ribbon will touch the board perfectly then your problem will solve
Hello, you might have a bad film ribbon , it might be damaged by some liquid just open the controller check all those trace which is at the end going to x and L1 , also there is a tiny hole from back side of controller just hold it for 10 sec ,also check the controller when you enter to the game press and hold ps button and make sure it's turned off then again turn it on to see x button working in this way or not
what's the part with the glue strip about ? L2 constantly phantom pressing and i want to know if i have to do the glue part. controller is fairly new. thanks in advance for any advice
Hello , that will keep the Ribbon connector with the board together ,all you need to do is make that thickness to make it tight so you will solve it by that .also make sure to place the spring correctly .
I sat on my controller 😅, L2 And R2 started jumping on their own. I rest the controller it worked for a few rounds. Then back to the problem. Should I I expect the same solution to work ? A technician said your controller strip needs replacement.
hello there my friend , that's one the most easy step just slowly take it out , you can do it just slowly take it that's all .let me know when you did it .
@@polar_cat hello Polar_cat , yes We have repair shop , but unfortunately we're too far from each other , do me a favor can you tell me the mode of your controller , it's written on the board , i will make a video especially for your problem to solve it ok ?then no worries
Hey man my L2 presses randomly like im just playing and L2 press randomly how do ik of ots the motherboard pad or the L2 itself also what did u add under the pad ?
@@D.B.M.02 next time if you opened the controller try to make that paper a bit thicker ,just clean that ribbon film with cotton bud without any cleaner ,also clean the board where they connect together , that's all , in worse case you have to see if there is any damage on the ribbon film or not ,if it's damaged by water you can see it ,that's all .
Hiii. I did same as in video it worked for few minutes but now I'm facing issue that whenever i move left joystick my r2 button is automatically pressed with it. Plz help 😢
Hello Zahid , try to reopen you're controller once again , double check everything and close it again and let me know if there is still any problem or not
Bro you are GOATED🐐🔥 my tr2 l2 triggers were both glitched out pressing themselves and also my D pad up button was non responsive i tried the second part where you put a piece of card behind the film and now every single button on my remote works again! You just earned a sub🎉
Hello and thank you Brother ,well done ! glad it helped 👑🔥🙌
thank you so much, i followed every step in the video and i actually fixed it. I felt so proud of myself. THANKS MAN!
Hello, glad it helped my friend , you're most welcome 🙌
Thanks from India bro 🇮🇳...facing this problem from nearly 6,7 months and i fixed it after watching your video
Hello Brother , you're most welcome , glad it helped 🙌
My R2 and up/down would randomly press even when I shook the controller removing the little foam and adding a piece of a old credit card fixed it, now it back to normal thanks for the video 100% helpful
Hello Ricardo , glad it helped 🙌
thank you so much. May I ask what you used behind the black thing? Greetings
Hello and you're welcome , it's a cardboard , it was for battery coverage a very simple cardboard
www.ebay.com/itm/233399126693 like this one for example
bro youre a LIFESAVER it only need to be cleaned for me, cleaned to the VERY inside like you did, AWESOME AND THANKS GOD BLESS YOU !
Hello , you're most welcome Brother 🙌 glad it could help
@@HKsystem did the cotton swab have a bit of alcohol?
@@pietropalermo385 hi,No ,it's TUNER 600, KONTAKT CHEMIE
Just cleaning the triggers worked for me, thank you!
well done buddy .
Thanks! Thanks to the video, I solved the problem with my PS5 controller. You're the best.
Hello , anytime my friend , glad it helped .thank you🙌
Yo had a few problems again came back to your vid and the cardboard method worked for me , wanted to thank you again oh and if you can do a video about the keyboard locked at the letter g that'd be awesome, again Thanks man
anytime brother , glad it helped , sure but what kinda keyboard it is , is there any water dropped inside it ?
@HKsystem I meant the one you use on the ps4 when you type
Thank you man You saved me like 10$!!
Hey man my R2 keeps pressing itself and when i press it, it does nothing (only works by itself) please can you help. Another problem is that my controller stick drift is bad. Like it teleports my camera around my screen on fortnite. Please can you help
Hello , For R2 just watch this video till end you will find out how to fix it , about R3 (right thumbstick) Drift I will upload a video how to fix it
@@HKsystemcan you do one for the L3 too? When I like try to go forward it doesn’t work most of the time😅
@@mouaaddahmou6493 Sure
@HKsystem can you plz help me with L3 and R3 it's 2 controllers one has L3 stick drift and the other has R3 stick drift. No matter in games how high I put the dead zone, it still drifts
@@Foregin942 hi, for R3 already uploaded a video you can check my channel and find it for L3 will upload soon
For me cleaning the rubber thing fixed it
I opened it up tbh im used to it
And so far its working
Because my controller got to
the point every button was putting me back on home screen or my car keeps going on reverse 😂but its fixed thank you sir
Hello brother , glad you could fix it eventually . 😄 🙌
@@HKsystem yeah I have my ps5 still in box believe it or not
Doing some house work unfortunately taking me a long time😅
Can't wait to put my setup together
Also I respect my ps4 it's been through
a lot with me
@@The--Ghostspider66 oh then you have a PS5 as a backup 😄 unbox it before PS6 release :-)) , I also like PS4 very much .
@HKsystem can't wait I hope
Ps6 is worth it unlike ps5 pro
Which is in ps5 suit
thanks man! this was super helpful, I just fixed it in about 5 minutes!
hello , glad it helped .
Im trying this tonight hope i come back here with good testmonies
Good luck brother
This fixed my issue!! Thank you!
Hello , glad it helped brother .
Man thank you so much and also i like your accent its quite cool a english russian accent 😂❤
Hello , you're most welcome , Thank you I really appreciate that 😂❤🧡
@@HKsystem ❤
HOLY RAVIOLI it worked!! that cardboard pad solution!! and all other buttons register more snappy and clean THANK YOU VERY MUCH!! 👍🏻👍🏻👍🏻
you're most welcome my friend , glad it helped .
OH MY GOD
I watched a lot of videos on how to solve this problem....
But ur solution is the only one worked
Now i can play Devil may cry without dante annoyingly changing the swords 😂
glad it helped 😁😁
This was very helpful, many thanks!
Hello my friend , glad it helped .
Only my r2 keeps activating by itself. Idk if I should go all the way to put the cardboard or just clean the sensor underneath. Can I ask why and how the cardboard would help with this problem? Maybe a little technical answer or the explanation behind this might help
Hello Christa , the reason why we use cardboard is to make sure the ribbon film and mainboard stay tight together so there will be no gap between them and problem will be solve . hope this little explanation helped you out .
@@HKsystemhello! First of all thank you for replying! Initially I cleaned the triggers and it worked but only for like 5 days. I wanna try this method.
If you don’t mind, I need some help. Around 1:34 u somehow took the green board apart form the black board, they come out together for me, like I can’t separate them, as if they’re one thing
@@christa4172 Hello my friend , no worries, which model number is your controller .
Thanks for answering again. I didn’t really use my ps4 as much these days, so I left my controller alone for a bit. Now the probes is still there though. So I’m back to this video .
I got the controller with the ps4 (which is model is CUH 1216a). I actually took off the controller bar code so I have no idea about the controller model. But I did some research. I think my model might be CUH-ZCT1U, since I saw “JDM 030” on the motherboard.
Thanks again… hopefully my controller gets fixed, but thanks regardless for your time
@christa4172there's a screw under the battery. That holds everything together. It's the only other screw in there so you will see it.
Bro thank you so much!! As many times that I have taken this remote apart to rebuild and fix it. From spare parts. Taking old spare boards and all “. So I never knew there was a riser underneath the main button layout. But I doubled up with a spare from Extra remote parts. and boom I was back in business🙏🏾 Thank you💯
Hello my friend, Well done , Glad it helped .
Thanks man. You're amazing.
Anytime Saud 🙌
You are my hero, bro. Yes indeed, my problem was here 5:36. Thank you!.
Hello :-) that's great , well done brother
amazing video brother , but it scares me to open my controller ( as in what if i break something ) . is there any way to fix it without opening controller
Hello brother , and thanks for your comment , I'm afraid not , unfortunately there is no way to fix it without opening it .
@@HKsystem thanks for attending the question .
@@PumpkinJackKun Anytime , Do not hesitate to ask if you had any questions about it whenever you decide to fix it .
Hello brother my r2 when i play it its good there is no problems but sometimes it doesnt work when i push it and just work by itself do you think it’s the same problem as the one in this vedio?
Hello brother , yes it's same exact as your controller problem .
can you help me? my r2 isn’t fuctioning and when i flick the analog button (the left one) the r2 trigger themselves
hi, open the controller and carefully check all those trace on the Film Flex Ribbon ,to see any damage on in or not , and clean between connector and film .
What are you attaching under the pad? Is it like some type of a card or something?
it can be any kinda , for example that one used in video that was for battery cover , it's simple just find something thicker than a simple paper 🙌
@@HKsystemhey! My R2 button was just being pressed by itself. but I cleand it and put a card under that pad thing like in the video. But do yk like the white rubber thing on L2 and R2 buttons. I think maybe I changed those two, so now my L2 button is being pressed by itself. After I fixed it my controller worked for a little while. Another thing could be that my Ps4 is jailbroken
@@danialkhan.exe04 no that's not about retail or jailbroken console , just reopen the controller and again change the paper till you find that ribbon will touch the board perfectly then your problem will solve
@@HKsystemwhich ribbon touches the board perfectly?
@@danialkhan.exe04 Keypad flex Cable Ribbon
What a life saver
Glad it helped my friend 🙌
Bro you are GOAT
cap or no?
@@isac3445 Nah actually. I fixed it by doing what he told. You do have to be extra careful if you've never done it tho.
🙌♥🔥
Hi guys whenever i play cod warzone the shoot button or the r2 button works on irs own but if i click r2 it still works so is this fix helpful?
Go ahead , it will fix it
Please Help my X button is working on Home screen but not working during game !!!!
And my L1 is keep pressing even i didn't click it in every game
Hello, you might have a bad film ribbon , it might be damaged by some liquid just open the controller check all those trace which is at the end going to x and L1 , also there is a tiny hole from back side of controller just hold it for 10 sec ,also check the controller when you enter to the game press and hold ps button and make sure it's turned off then again turn it on to see x button working in this way or not
@@HKsystem bro thanks problem solved 😄👌i follow your steps and boooom done thanks again bro 😄
@@cristianoro-07 That's great brother , glad you could fix it 😀😀🙌
Hi. How do I get the gamepad tester?
hello, just open google type gamepad tester or hardwaretester first website ,that's it
U don't need it. Google game pad tester and use the web version. Your phone comes in very handy for this as it has Bluetooth
what's the part with the glue strip about ? L2 constantly phantom pressing and i want to know if i have to do the glue part. controller is fairly new. thanks in advance for any advice
Hello , that will keep the Ribbon connector with the board together ,all you need to do is make that thickness to make it tight so you will solve it by that .also make sure to place the spring correctly .
@@HKsystem thanks bro
@@PepperSaunders Anytime Brother .
I sat on my controller 😅, L2 And R2 started jumping on their own. I rest the controller it worked for a few rounds. Then back to the problem. Should I I expect the same solution to work ? A technician said your controller strip needs replacement.
Hello , just give it try , you will fix it if you doing exactly like the video 😀
@@HKsystem Hi ..i got it fixed they replaced this strip ...I have yet to check if the issue is resolved. Thanks for the reply.
@@alinasir27 Hello brother , no problem , glad it fixed eventually
Worked perfectly! Damet garm
anytime mate ❤
Hey, my R2 works by itself but I have a different problem, when I push R2, it’s not as hard as L2, how can I make it hard again please?
Hello Mouaad , very soon I will upload a video which is related to your controller problem , stay tune and turn on the notification
@@HKsystemcool thanks
Bro is speed running
Bro I can’t remove the black thing and my controller is glitching out please help me
hello there my friend , that's one the most easy step just slowly take it out , you can do it just slowly take it that's all .let me know when you did it .
It’s not coming out
@@HKsystem do you have a repair shop or something so I can send it to you
@@HKsystem reply please
@@polar_cat hello Polar_cat , yes We have repair shop , but unfortunately
we're too far from each other , do me a favor can you tell me the mode of your controller , it's written on the board , i will make a video especially for your problem to solve it ok ?then no worries
Hey man my L2 presses randomly like im just playing and L2 press randomly how do ik of ots the motherboard pad or the L2 itself also what did u add under the pad ?
hello my friend ,my apologies for late answer ,could you fix it?
@@HKsystem no problem i tryed to but still happening randomly
@@D.B.M.02 next time if you opened the controller try to make that paper a bit thicker ,just clean that ribbon film with cotton bud without any cleaner ,also clean the board where they connect together , that's all , in worse case you have to see if there is any damage on the ribbon film or not ,if it's damaged by water you can see it ,that's all .
@@HKsystem i appreciate your help i will try it tomorrow
Perfect and professiional
thank you Brother ❤👑
i will try your way....i have the same issue but the l2 and r2 are making my gear and butten to be broke
Obrigado. Você me ajudou a consertar um esse problema aqui no Brazil.
De nada hermano
Thank you :)
Anytime Rabs
Hiii. I did same as in video it worked for few minutes but now I'm facing issue that whenever i move left joystick my r2 button is automatically pressed with it. Plz help 😢
Hello Zahid , try to reopen you're controller once again , double check everything and close it again and let me know if there is still any problem or not
can you do it for ps5
do the same on ps5 it will fix it, if you don't know how to open ps5 controller you can check my other video .
Does this work on ps5 controller? Pls someone help me
Hello, yes it does work on both controller .
@@HKsystembut idk how to open my ps5 controller can u upload a vid on that?
@@Kknight_knight check my channel my friend there you can find
thanksss broo!!!!!
Anytime brother 🙌
What is that withe and orange thing u use ? 6:14
that one is a battery cover ,a simple paper but a bit thicker
It didnt work and i followed every step can you help
Hello , please try to check Film Ribbon Cable to see any damage on it or no .
Thanks man
Anytime 🙌
Dawg think god I saw this video my r2 button was not working and I had to take it off In order for me to fix it
glad it could help you 🙌
Really struggling with connecting 8:38
Ok got it, and it FUCKING WORKS!!!! Thank you for this video.
@@ffhdjrbfbdndbdnd7902 anytime , glad it helped 🤠
7:46 is it safe to clean it with alcohol ?
Hello Nicat , we're not usually work with alcohol , you can just buy a Dry Electronic Contact Cleaner spray that would be work perfectly .
Thanks mate. It work with your help.
@@nicat4172 anytime ,glad it could help
Can I use water??
Nooo,of course not!!