Getting the PERFECT Fitment with 33's!! *ANY RUBBING??*
HTML-код
- Опубликовано: 6 сен 2024
- Finally installing the new wheels and tires on my 3rd generation Toyota Tacoma!! . Today the RTX wheels finally go on the truck! It's been sitting in the drive way for the better part of the week and today it gets to drive some! The wheels are 17x9 with a 0 offset wrapped in a 33x11.5 tire. I could have gone a little wider, but I did save some weight with these tires and still have no rubbing. I think this is a good setup for now and can't wait to see if I get some better mpg as well, not that it's important but just something else to see! Stay tuned for more projects coming!
www.rtxwheels.com - bit.ly/RTXBROSF...
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
Music By: www.epidemicsound.com
#toyotatacoma #rtxwheels #3rdgentacoma #howto #wheelinstallation #nittotires
Did he say why he didn’t drive to the tire shop with stock wheels and have them dismount and mount the new ones?
When I sold my previous wheels and tires, I had the truck on blocks because my wheels had not arrived yet which is why I had to borrow my dad's 4runner. I sold the stock setup along time ago!
How about rear end and front end gear ratio change.
You don't have to regear with larger tires. It's not necessary, however, I did for the constant shifting and went with 5.29's for the 34's I'm currently running. ruclips.net/video/bd0aqwB2Nko/видео.html
ruclips.net/video/SJm73yOzc_M/видео.html
The thing on the Semi is a Gas Compressor skid. Looks brand new so its probably headed to a pipeline compression station.
What’s the wrap on the rear end? I have some nasty scratches on my bed from off-roading I want to cover up.
The first link is this wrap! Second link is what I currently have! It's not too hard, just time consuming!
ruclips.net/video/ZF99HDA7HSA/видео.html
ruclips.net/video/-5WRcWRQQkU/видео.html
I recently got a 265/70/17 nitto and I been experiencing some rubbing once i hit bumps while i turn plus I do want my mud flaps on do you think 265/65/17 will help me out at all? I also do mot have a lift on my truck wanna stay stock as possible
That should be very similar to the stock tire size so not sure why there would be rubbing, but mud flaps usually get in the way so if you are rubbing now, you'll rub more with those on!
I know it’s two years since. But can you tell me On this set up what offset exactly are Those rims?
Those wheels had a +10 offset! So it was a 285/70/17 with the 17x9 +10! It was a good setup for a smaller tire!
Did you have to use a lift to get those tires to clear? My TRD Off Road is supposed to be here the end of the month and I’m changing tires and wheels before I pick it up.
Yeah! You need at least a leveling kit to clear up front. Depending on width, some trimming might be needed too! I’ve done the CMC, and a new alignment for more clearance.
hi when putting bigger tires do you have to do anything to the computer I have a 2021 Tacoma TDR off road wanted to go 1-2 sizes bigger
Nope! The only thing I would mention is the speedometer recalibration, but even with the 34's I'm running now, I'm off by like 4 mph, but it's not worth the $400 to me to buy that and change it. Other than that, you'll be fine with slightly larger tires!
Beautiful, any lift?
Tires look great! Love the vinyl, but I hate the 2 stripes on the door. I think it takes away from the back vinyl
I'll be changing that at some point, just haven't got to it yet lol
Bros FOURR Speed looks great overall though! Love the color, I have the VooDoo Blue. Just bought it a month ago :)
can i put 285/70/17 with the original 17" wheels? thanks
You should be able to! What's the width on the 17's? I believe they are 7'' wide, so you just have to make sure the tire can accommodate that width. For example, the tire may hold a 7-9.5'' wheel, so just double check!
Those look nice, looking for some for my bone stock 17. Dont want to get a lift.....not yet at least. :D
Looks sharp as they get to me. You guys definitely have and have had some really nice vehicles.
My wheels are 17*9 can I put 285/70/17 tires with out lifting my truck?
You will have rubbing, but if you cut/trim enough they will work! You will most likely have to do the cmc!
Is 285/75r16 going to fit with a leveling kit and a 1.50 wheel spacers? 3rd gen taco?
You will have to trim with the wheel spacer. Currently I am running 285/70/17 with a 1.25'' spacer and I had to do the CMC for them to fit, you would be good without the spacer though.
Where can I purchase new tpms sensors and how could you tell which ones are compatible?
Your local tire shop should carry those and usually most are universal so you can really use any type.
I just got a sr5 2020 Tacoma what’s the biggest tire you can fit on stock rim and without rubbing
I'd say about a 31 would be max. Might hit off roading at hard angles tho. Can always do a leveling kit tho if it does. 1in strut spacer and 1in rear block. Like $300 and super easy to do
Does your Tacoma have a lift other than stock ?
Yes it's lifted! OME kit that added 4'' up front and 3'' in the rear! ruclips.net/video/c1c0yfm7GXQ/видео.html. ruclips.net/video/40s6Asn5zcs/видео.html
@@BrosFOURRSpeed thank you.
What tail lights do you have??
I got these from Tacoma Beast!! I'm not sure if they still have this style, but they have a lot to choose from!
Wuaoooo super nice bro! I have the same truck as you, I want to upgrade my tires, I have a 17” TRD wheels, do you think 285/70r17 tires will fit on my truck with no rubbing? Also I have your same suspension
I have 285/75/17 so those specs should be very similar to mine. I barely had any rubbing, maybe slightly in reverse on non level pavement, and some rubbing offroad, but not enough to trim anything. I've added spacers since then and did the CMC and pushed in the fender liners. You should be good with that set up!
Are you running stock height?
Nope! It’s lifted! ruclips.net/video/c1c0yfm7GXQ/видео.html
Which rtx wheels are those? Your link no longer works
Not sure why that link doesn't work, but here they are! rtxwheels.com/products/rtx-offroad-baja-satin-black-with-milled-rivets?_pos=7&_sid=5b7212137&_ss=r&variant=39277176422453
I have a 17x9 0 offset. Looking at the wildpeak falken at3w. What size tire will fit without a lift?
With just a stock truck, try to stay as close to the specs of the OEM tires you have. I believe those are 265/75/16, I could be wrong. But I wouldn't go much larger or wider if you don't want any rubbing.
I purchased a 3" suspension lift for my 2021 Tacoma, includes aftermarket UCAs.. Any insights on if 285/70r17 will rub with a 17x9 (0 offset / 5 Backspacing)??
This video is very helpful, just not sure of exact wheel specs you have
So my wheels are 17x9 0 offset with a 4.5'' backspace, I had 285/70/17's with no issues. I did do the CMC for some extra clearance behind the front tire though and recently went to 305/70/17 (34's). I also have aftermarket UCA's and tomorrows video is on a new alignment, definitely check that out because I don't have any rubbing with my 34's now!! With the right alignment, you may not even have to trim.
@@BrosFOURRSpeed thank you so much! I may end up going with 275 / 70 /17 - would this almost guarantee no rubbing? The lift I settled for is ironman 4x4 foam suspension stage 2!
What offset did you use on the wheels
James Howard These are at 0.
i'm having a hard time deciding between 2019 sport vs off road... i like the off road suspension and features a lot better but the sport hood and matching bumpers, fenders, front bumper looks so good...
Sounds like you would prefer the sport. Honestly I wanted the offroad for the crawl control and I personally didn't like the hood scoop and I knew I was going to be changing the fenders at some point. All based on what you like and need, you can't go wrong with either!
I dont believe the Sport model comes with the locking rear differential if that's important to you off roading. If the taco is for on-road only, then get the sport model.
What lift did you use how many inches and how has it been has yheee been any problems with it
It's an OME kit, and with 8k miles on the lift, I've had zero issues so far! 2nd link here is the height difference! ruclips.net/video/c1c0yfm7GXQ/видео.html. ruclips.net/video/40s6Asn5zcs/видео.html
Help! Just got some brand new nitto ridge grapplers installed on my Tacoma yesterday. They look great, but they rub on my mudflaps pretty badly when turning in reverse or just slightly tapping the brake while turning. It’s a pretty big area they’re rubbing on. Is there a fix for this? I’d like to keep the OEM flaps because of the classic Toyota look and protection of my paint but I noticed you didn’t have yours on. Do you notice much paint chipping? Thanks so much!!!!
I've never had any paint chips even from the 34's I'm running now! This truck never had mud flaps on it! I've put 45k miles on this truck and never experienced a paint chip from the tires! Two things you can do! First is trimming! If you can even heat up the mud flap and push the plastic away from the tire, might be able to get by with that!
ruclips.net/video/qEU_W3RDQY0/видео.html
If it's really rubbing a new alignment is the way to go! I don't have any rubbing with the 34's after that! ruclips.net/video/MJK8c0pBKPs/видео.html
You are the man!! 😎 Just took them off and seems to do fine lol. I just got an alignment yesterday when I got them installed lol! I’ll leave them off for a while and see how it goes! Thanks so much man, you’re the best!!!
@@p-51mustang51 No problem! Now I do have the rock sliders which might help block anything from hitting the pint as well, so even if you have side steps that’ll help some too.
@@BrosFOURRSpeed yep! I have side steps so that’ll be good! I want to do away with them and get sliders though lol. I have literally been watching your videos exclusively to do stuff. Like I installed the Hi-line front bumper based off your video! Next mod is the diff re gear if I can ever afford it lol! I appreciate everything man
Are the upper control arms stock? Tires look great on your truck!
Thanks! And they are the SPC arms!
Do you happen to have or remember wat ur alignment numbers where on the 33/12.50's u took off? Im having a hard time getting someone to get the alignment correct....also did u replace ur UCA's?
So I went with the factory spec settings after I installed the lift and got these tires because I wasn't sure what I needed. I do have SPC UCA's, but now with 34's I have a new alignment needed to have no rubbing! Check out this video and hopefully that can help! I have the spec sheet shown in this video! ruclips.net/video/MJK8c0pBKPs/видео.html
@@BrosFOURRSpeed thanks 👍
@@macymathews2534 No problem! Are you going to that size?
@@BrosFOURRSpeed i have 33/12.50/20s on it now and was jus curious wat the alignment #s were and if new UCA s where needed
@@macymathews2534 I rubbed some, mainly in reverse, but those were 33x11.5 so I had room. I had 33x12.5 on my first setup and had zero rubbing with the right wheel offset so it can be done without aftermarket ucas.
What offset is your rims? What brand name are your tires?
What brand name are your rims?
I like to buy 4 for my 2020 tacoma.
The wheels are from RTX, 17x9 with a 0 offset. The tires are Nitto Ridge Grapplers. It's a good setup with no rubbing!
It's this wheels came in size 17X8 with the zero offset or 16X8 with zero offset?
@@longevity7264 I'm not sure, I think they were only 17x9 in the size I got, check the website though!
Like that look 33”x12.50 on Tacoma think of get one plus with 2 “ lift will be fine
Roof rack would look sick on Tacoma
I always tell my dog Fergie what I'm doing and how long I will be gone .
I am Blue you better get him iPhone or iPad.
I'd like to get them.
I got these from Tacoma Beast!! I'm not sure if they still have this style, but they have a lot to choose from!
So, just to be sure I’m understanding you correctly.
You’re saying if I get at least a 2” lift, with a 285/70/17 tire and 17x9 wheels with a 0 offset (backspacing between 4”-6”), I should NOT have to do any CMC or pinch weld mods? Maybe just minor trimming? I don’t off-road at all.
My lift is about 3'', maybe a little higher and I had a 33x12.5 with a 19x9 +10 and didn't rub hardly at all, very minor rubbing even offroad, with my new set up there was zero offset, I had no rubbing until I added the spacers and did the cmc and pinch mod!
Bros FOURR Speed - Which makes sense because by adding the spacers, it was similar to a more negative offset.. thus requiring you to now do the CMC and PW mods. So, what lift are you on? I was considering the Eibach pro truck lift, but I believe that’s only gonna get me 2-2.5” of lift.
What size lift do you have? Suspension lift?
It's an OME suspension lift. I have about 3.5'' in the front and 3'' in the rear. Here's some measurements if you want to see it all! ruclips.net/video/40s6Asn5zcs/видео.html along with the install! ruclips.net/video/c1c0yfm7GXQ/видео.html
Does anyone know if I run the same 33 in tire set up with a 2 in lift it would fit?
There's a good chance they could fit, you might have some rubbing though to trim. I have a little bit of clearance with this lift, so if you are ok with trimming some they should fit.
I was trying to figure out why you're truck looks familiar I've seen it while I was at work in Charlotte!! Keep up the vids man I just bought a 2019 Tacoma
What lift fo you have on your truck?
I have a 2020 sr 4x4 4 door. What is the tallest and widest tire I can put on the 16 inch rims?
Where did you get your tpms sensors
I think I either used the stock ones or the tire guys had them available I could buy
I have the 887 springs up front with no spacers added on my coils so 1 3/4 lift up front and about 3/4 in the rear. I have 8.5 wheels I was wondering if mine would run with the 285/70/17 I have 265/70/17 now
Possibly, I do have a slight rub in reverse sometimes, so you may have that as well. It's nothing crazy now but at some point I'll have to do the cmc.
Very nice truck! You apparently have done your home work on the tires and lift. Whats the stock rim offset compared to what you have now. Do they make rims the will set the tire out even more? Like maybe another inch.
I think they are around +25 I think. New ones stick out like an inch farther than stock. You can get way more aggressive offset if you'd like. Some big diesel trucks run -44 and the whole tires/wheel sticks out. All depends on the look you're going for.
@@BrosFOURRSpeed did you had to lift it ?
Quick question guys I’m running 285/70/17 with spcs. I got about a 3in front an 2” rear. Having some rubbing issues. Just wondering on your alignment sheet what caster/camber readings you got to make it not rub, besides off roading of course? Thanks
Sorry this is so late! I can't remember exactly, but I know with my spcs, I had them basically set in the middle since I wasn't sure what to do with them. I'm going in for another alignment within the next week or so and will be making a video on that!!
@@BrosFOURRSpeed awesome can’t wait!!
@@BrosFOURRSpeed I got the recommended settings from runnin4tacos. They say for 33/285s and 34s to run them on F setting and for 35s an up to run them on G
@@kylestokley91 Ok cool, I’ll definitely get it dialed in and I should be able to show my current alignment specs as well hopefully!
Need cmc
Real nice set up . Im thinking of getting that same size tire . You think 285/75 /17 will rub ? Is there a huge diff from 285/70/17 with -12 offset wheel
I don't think there is a huge difference in those tires, but look up the brand you want to see the differences. -12 would definitely rub unless you had the cab chop. I'm at 0 offset, and they almost rub, if I had wider tires I would have needed the chop done.
That tire size is perfect.
I actually went up to 34x12.5! Now I have the perfect setup lol! ruclips.net/video/oOjCrOaDLBU/видео.html
@@BrosFOURRSpeed I watched that, great video. It looks good but I still like the 285/70s.
I am more mild, than wild. I have a 4Runner coming in. I am hoping to fit 275/70s on it to start.
What are the wheel specs?
These are 17x9 0 offset!
Nice video, thanks. Would it rub with a 1.5" spacer? I'm thinking of installing the same setup.
It will! I installed 1.25'' spacers and went ahead and did the cmc also after installing them! ruclips.net/video/mik0QQbeBpM/видео.html CMC: ruclips.net/video/qEU_W3RDQY0/видео.html
@@BrosFOURRSpeed Thanks bro!
No problem! (on a side note, just installed larger tires lol, that video will be coming soon!!)
@@BrosFOURRSpeed thanks, i'll keep an eye on it!
Did I miss the ET? WERE THOSE ET:0? Wondering because I want to chemfe my set up. I like this one. Looks great
What do you mean by ET? Here's the specs if this helps....Wheels are 17x9 with a 0 offset and I was running a 285/70/17...I now have 305/70/17 which still fit great!
@@BrosFOURRSpeed ET is another way of saying offset. When we order them at my shop, they just show ET. Instead of saying offset. Sent it out to you by habit. Much appreciated. Thank you
The truck looks awesome one quick question i have a 2018 4 runner stock tires are 265/70/17 i want to go up 285/70/17 should i need spacers ?
Don’t use spacer.
So much better than the last setup. Glad to see you stuck with the Ridge Grapplers!
Ridge Grapplers were my choice had I bit the bullet and gone 285s instead of 255s.
Jump to 4:00 To get to the content! Thumbs this up for people to see. Thanks
I have a 2019 4x2 TRD Pro. I have no interest in going off road but want 20 x 10 with 33" and ideally dont want an additional lift. Is it possible? thanks
I don't think that's possible on a stock truck without trimming a lot. The pro has a bit of a lift which might help, but going 10 wide with a 33, it would have to be a skinny tire I think to fit. Are you ok with doing the cab chop mount and some trimming?
No the thing about 33" is that you would definitely have to slightly trim the back flaps on the front wheel setup especially when you are trying to make a full uturn in or out. The 33" would definitely touch the back end on the front fender's, but it's definitely fine on the rear end as in the back wheels, the fenders are pretty much spaced out well on the rear end. As long as you don't mind trimming out a bit you are definitely good to go with a 33"" setup.
If not, once againl this is my personal choice and opinion upto a 32" setup is much better and you really can't tell the difference at a glance between the 32 and 33.
But take it out to a tire or rim shop you check it out there and see for yourself.
If you're going offroad you don't want 20's with a 33. Should never go over half rim compared to tire. 33's should be a 16 inch rim at most
What lift would I need to fit these? My taco is stock right now
I have an OME lift kit, gave me about 3.5'' up front and 3'' in the rear. A leveling kit might not be enough, but I'd say at least 2'' and depending on how much trimming you want to do as well.
On stock wheels do you think a shit ton of trimming or even a cab mount chop would be needed? Plan on going 33s on stocks with a 2” leveling kit but not really sure. I really don’t want any rubbing lol
Larger tires is a must in order to get an aggressive look. Btw, you're still going to get some rubbing and you will definitely need a CMC. Also, you might get some rubbing when making sharp turns on the inside frame. I had that problem and bought some 1"1/2 spiders wheel spacers. Love the tires set up!👍
I showed in the video that there isn't any rubbing, even at full crank which I didn't show. I won't need the cmc unless I do spacers or when I get more aggressive offset. Offroad there will be slight rubbing, but daily driving I don't have any rubbing issues.
@@BrosFOURRSpeed sounds good and hopefully not 👍
What size are the original stock tires?
I think they were 265/70/16, it's been a long time since I've had the stocks!
Morimoto XB fog lights would look really good, match that black headlight look
I actually have some already that I had to switch out, but will be putting them back on to match!
Hello where did you get your grill? I have a 2018 sr5. Also. Can you recommend size of bigger tires for my 2018 sr5 I just recently bought. I’m looking for a better off road look with no rubbing and changing miles speedometer
It's from BP fabricating! If you have a stock truck, try to stay within what the factory trie specs are, you can probably go a little taller and keep the stock width or do the opposite. Any larger both height and width is when you start to rub on stock height.
You could rent a U-Haul small white van for a day $20.. but good you can borrow 👍 Cool tires
What brand tire did you go with?
These are the Nitto Ridge Grapplers! I've had a few sets since then and I love them!!
Are they loud when driving down the road? I was going to go with the BF Goodrich but everyone complains about the loud noise when driving down the road.
@@p_chaney283 These are quiet like stock! Very good on road tire and does great on the trails too!
Looks really good! Random question...what kind of dog is that? My neighbor's dog looks exactly the same and just curious.
She's a labradoodle! and thanks!!
17s 👍🏼👍🏼
Do you plan on doing forced induction to the Tacoma? It would be a good idea, especially with trying to push nearly 240 pounds of wheel and tire around.
That's a lot of money for a pickup. I don't see a need to do that, it performs fine with the weight.
Hey man , what's the lifted height ? 2" 3" ?
It's right around 3.5'' up front and 3'' in the rear! I made a video on that if you want to see more specs on that! ruclips.net/video/40s6Asn5zcs/видео.html
Need help, thinking about getting 285/75/16 and i have an 3/2 leveling kit install do you think it will rub?
It shouldn't, I'm running 285/70/17 so those tires are going to be very similar size wise, I only have slight rubbing offroad.
Where do you order you tires from? And wheels
I got them from real truck.com and wheels are from RTX, that link is in the description!
Looks great! Did you do the front diff bushing on your truck?
No, I haven't had any issues with that. The only time I did was when I went to a 6'' lift on my 2nd gen tacoma.
Wow, looks way better than your other setup 🖒. I probably would have going with the 12.5 wide, but saving the extra weight is a plus 🖒.
Thanks! And yea I miss the little bit wider tire, but maybe I'll find one that doesn't weight as much for the next set up!
I have -38mm offsets on SCS wheels and talk about rubbing....lol love the aggressive look tho
Yea that's aggressive!!
Jared Scott stock ride height?
Whats the lift on the truck
It's the OME kit! Roughly 4'' up front and 3'' in the rear! ruclips.net/video/c1c0yfm7GXQ/видео.html ruclips.net/video/dcMd5BOT1pQ/видео.html
Replace the bumper.
That'll come!
Hmmm what’s bout 285/75r16?
Those should be very similar to the specs of these tires so that should be good!
@@BrosFOURRSpeed and with suspension lift or without ?
@@brianparris7020 With a lift, unless you don't mind trimming a lot!
@@BrosFOURRSpeed hmm for my
Tire size what inch should I get ? I am following you lol
great video. thanks. do you think the 285/70/17 on the original wheels will rub? i have a 2019 sport tacoma 4x4. thanks
It's possible. Front what I've seen the offset of those wheels is very positive so the only rubbing that may occur would be on the UCA, maybe behind the wheel. But you could always add a spacer to help with that.
How many inches did you lift in your Toyota?
It's about 4'' in the front total and 3.5'' in the rear!
I just noticed there are two r's in fourr.
Yup, we carried that over from our old channel name and already had the double R logo going.
how much is your truck lifted
It was about a 4in lift
Wow your truck looks nice you should give it a high lift
285s are the perfect size for a Tacoma. You'll probably still have rubbing on the cab but that's not the worst thing to be done. Definitely look better than 18" wheels, too. In terms of off roading you're probably better off with 16s (even more sidewall) but you get way more choices of tires, wheels in 17 luckily. Do 34s next, 285/75r17s. ;)
andrew wat Actually no rubbing on the cab for daily driving! If I kept the 12.5 wide, I'd definitely have to to the cab mount chop. I thought about a taller tire so well see!
@@BrosFOURRSpeed Daily drive doesn't have any flex though lol, off roading means your suspension articulates
Where did you get your grille. I like it
I got it from BP Fabricating! They have a good bit to choose from!
Looking fresh !!!
Thanks! Went up to a 34 since this lol!
Nice !!!
Lol who doesn't try to race tacomas once I installed my MF exhaust everyone tries to
I don't race my tacoma at all lol, it's a truck..that's why I have my R8 to go fast! But if you want to, go for it!
What was the exact size of your tires
Did you do a video on Recalibrating your Speedometer after installing your larger tires?
I didn't, it's only off by about 2-3mph so I didn't see the need to do that. I plan on going to 35's next year, and I may have to do that then!
That contraption on the massive tired truck was our government inflation machine, arriving in every state coming soon.
I don't understand how a tire changing machine is a government inflation machine, can you explain that?
@@BrosFOURRSpeed lmao. My bad. I was commenting on another video. My bad
Love the wheel/tire setup!!!
How do you like the lights at night BTW?
Are you selling any of these used tires or rims 🤔 I’m buying some of these soon but if I can get a deal off of Bro’s FOURR speed that would be great
lol, I've already sold the old set!! They went quick!
Bros FOURR Speed how much do they cost and is it sane for as a gen 2 Tacoma?
I have a question, so I have a 3/2 leveling kit for my 2016 trd sport not installed yet. And I recently put on 265/70r17 on stock rims. If I install the lift do I need to get wheel spacers?
You shouldn't have too. Unless you have some clearance issues between the tire and UCA, they aren't necessary.
My hoa would be on my ass if I left my tacoma on Jack's lmao
Lol, I had no choice but it was only a few days!
Have you replaced your upper control arm how high is truck lifted I’ll guess it’s lifted 3” if so I’ll need to replace ur uppers they can’t get. Proper adjustment out of stock upper control arms ur front tires will wear soon that’s the problem I have my 2nd gen is lifted 3” I have 33’s and 18” rims I roll with kumho road adventure m/t’s. They’re are awesome tires I often wonder why people don’t use them tires you bought method wheels I love them that style my trick would look sweet my truck is that common grey color of Tacoma’s I have a channel of my truck it’s call Trd rock warrior sport check it out. Thanks
I am running SPC UCA's, and it's about 4'' in the front and 3.5'' in the rear. I have thought about getting another alignment with them since they are adjustable.
@@BrosFOURRSpeed ok i see thanks for responding
Are you going to recalibrate your speedo?
I haven't done that, it's off by like 2 or 3 mph if that, if it was more than that I would.
Stock suspension? Or wat lift?
It's lifted! OME kit with about 4'' up front and 3.5'' in the rear. Here's the first install for that if you'd like to check it out! ruclips.net/video/c1c0yfm7GXQ/видео.html
What trails did u go on at uwharrie
Can't remember the names. But here is a recent vid! ruclips.net/video/GKFmzOu2ixM/видео.html
I have the Fuel Couplers 17x9 with a -12 offset, same Nitto Ridge Grapplers 285/70R17 I believe 6ply. The -12 offset make mine poke a tiny little bit more than yours. I think that size tire is the perfect tire for these Tacoma’s.
Oh cool, I bet that's a nice setup!
Any lift or leveling kit on this?
Yup, it's an OME kit, about 3.5'' up front and 3 in the rear. I have all the install and comparison videos on this in the tacoma playlist! ruclips.net/video/c1c0yfm7GXQ/видео.html
You need to regear the differential with that large ass tires or your rpm is screaming high.
Actually I haven't had any issues with that, the regear will actually make the rpm go up to help make the gears a little longer too. At 70mph I'm around 1700, with a 5.29 at 70mph it'll be around 2200. I've researched into that so it might be something I do, but right now I don't see a need to.
What is the offset bro looks nice
0. Thanks! I might go to a -10 at some point
Any lift on your truck for 33 tires ?
Yea I have about 4'' up front and 3.5'' in the rear.
Hey bro’s for speed I need help I want to buy a gtr in the future but don’t know how much gas and service cost for a gtr I have a plan for the future on how I can get a GTR but I don’t know how much service and stuff will cost me! I’m 13 but I’d like to buy a GTR by time I’m 20-25 years old! I’m going to get a 350z when I get a job I’m going to try to get a older gtr like a 2013 or something but I would love to plan ahead and know prices so I’m sort of prepared!
What is ur lift height?
4in up front and 3in in the back. It's technically a 3in lift, but those are the overall measurements compared to stock!
Is that stock suspension?
Nope. Old man emu setup