Finally I have been waiting for a plastic cleaning video. Plastic cleaning is the most satisfiying part in the vehicle. Because it's effective and you can really tell the difference. Cleaning the plastic interior can sell the customer than any other interior material. Not only that but it's great for the dashboard, center console, steering wheel (which are plastic only).
5:20, would be best to use an air compressor air gun to get that leftover cleaner out of the seams and wipe with a towel. Also, the metal tip of the air gun if you hammer the top down a bit and give it less of an opening, it works much better by causing more pressure
Get some Ikia dish brush man, it even has a knife scraper shape to pick up gum or crap like that, its middle stiffness grade it won't scratch plastic and it will out last all brushes , and it's under $1.50 each
Thank you for the video. I have my first car to do the day after tomorrow. Until now I’ve only ever done mine. I have a question what to put on the plastic after it’s clean to make it that mat dark/black again
Dude I just got off work, I’m eating and watching your video and Bamm you drop a That’s what she said. Really??? In 2020??? Well I’m still laughing just as hard. You got me. Well played my man!
My black Weathertech moulded plastic mats never come back to all black, more like an ash grey in some spots. I only use brushes, lots of elbow grease and soap. I've even left them soaking overnight to no avail. Any suggestions?
Do you do any exterior plastic restoration and/or have a video you can link me to? I've been using mother's back to black but it doesn't do anything for plastics that are sun faded or turning gray.
“That Black Stuff”. Used it on my truck bumper trim, mud guards, and front plastic under-bumper trim. Makes them look brand new. Better than 303. Cerakote is also amazing for smoother plastic.
@@2old4allthis thanks dude. That's 3 times as expensive as back to black but I bet it works 10 times as good. How long does it usually last between applications?
@Brandon Deel Check out Perfection Correction’s test: ruclips.net/video/e7YlPgtrpA0/видео.html I’ve only had it on for three weeks, and only one coat so far, but it’s the best stuff (see what I did there?) I’ve ever used. I’ll put a second coat on soon, but it’s a little tedious. WEAR GLOVES! Also, Cerakote is an excellent wipe-on ceramic coating. It may have been equally good on the trim, but I liked that TBS contains carbon black.
I downloaded your guide and I found it very insight full and help full. I am starting out the trunk of my honda. Thank you for sharing your knowledge and skills!
How do you clean the weather teach floor liners. Practically every single customer of mine has them and I struggle to get prefect results. I use a drill brush, super clean, and a pressure washer but whenever the mat dries there’s always still dirt left on them
Hey man what do you use for interior cleaner? I'm using chemical guys and meguires. Would you suggest something better as these get pricey at 13 bucks a bottme
Hey man, just wondering how you detail in underground parking garages and stuff, do you squeegee out the water after before leaving or do you just leave it?
It's always best to clean after yourself. I use a microfiber mop. It picks up lots of the excessive water. There are people that complain and others that will take action against you. For me, I always work very clean without making a mess or spreading all my equipment on the floor. People are watching you.
So I slowed your video down to .5 speed to watch the work closer to real time. Still not to bad. You just sound drunk when you speak. It’s pretty funny. Thanks for the info.
At 9:00 you steamed the speaker will that not damage it? I know you weren’t holding it in one spot but I still wouldn’t take the chance. Lol also 13:48 😂😂😂👍🏼
That car is already clean. How about a car with coffee spills donut crumbs lots of dog hair and hasn't been ever cleaned with 35,000 milles on it. Really?
Finally I have been waiting for a plastic cleaning video. Plastic cleaning is the most satisfiying part in the vehicle. Because it's effective and you can really tell the difference. Cleaning the plastic interior can sell the customer than any other interior material. Not only that but it's great for the dashboard, center console, steering wheel (which are plastic only).
Oscar My Business Model is strictly interiors, i want to keep learning so i can be really effective at getting those done
You’re about the only RUclips detailed who actually mobile details for a living . I got my channel started but man I’m super busy detailing everyday
What is that spray called and brand that you use on the plastic trim?
Super clean ?
You can use a cone shaped drill brush on the plastic door sills too. Saves a lot of time.
5:20, would be best to use an air compressor air gun to get that leftover cleaner out of the seams and wipe with a towel. Also, the metal tip of the air gun if you hammer the top down a bit and give it less of an opening, it works much better by causing more pressure
Get some Ikia dish brush man, it even has a knife scraper shape to pick up gum or crap like that, its middle stiffness grade it won't scratch plastic and it will out last all brushes , and it's under $1.50 each
Just in time for interior job tomorrow.. thanks man.
How are you liking the whoop strap?
Cleaning the seat belts is exactly what I needed.
Thank you for the video. I have my first car to do the day after tomorrow. Until now I’ve only ever done mine. I have a question what to put on the plastic after it’s clean to make it that mat dark/black again
Dude I just got off work, I’m eating and watching your video and Bamm you drop a That’s what she said. Really??? In 2020??? Well I’m still laughing just as hard. You got me. Well played my man!
Damn!!! Good informative video for cleaning interior! Now seeing your videos more often and the likes you deserve!
Can you do a video specifically on cleaning seat belts. I would like to see what others do to clean them up.
He used an extractor
I just wanted to say thank you, this really helped me.
What interior cleaner is that? Can't read the bottle on my little screens and it isnt linked in description
greetings which steam cleaner is in question? All praise for the work.
My black Weathertech moulded plastic mats never come back to all black, more like an ash grey in some spots. I only use brushes, lots of elbow grease and soap. I've even left them soaking overnight to no avail. Any suggestions?
Stoners trim shine.
Do you do any exterior plastic restoration and/or have a video you can link me to? I've been using mother's back to black but it doesn't do anything for plastics that are sun faded or turning gray.
Solution Finish
“That Black Stuff”. Used it on my truck bumper trim, mud guards, and front plastic under-bumper trim. Makes them look brand new. Better than 303. Cerakote is also amazing for smoother plastic.
@@2old4allthis thanks dude. That's 3 times as expensive as back to black but I bet it works 10 times as good. How long does it usually last between applications?
@Brandon Deel Check out Perfection Correction’s test: ruclips.net/video/e7YlPgtrpA0/видео.html I’ve only had it on for three weeks, and only one coat so far, but it’s the best stuff (see what I did there?) I’ve ever used. I’ll put a second coat on soon, but it’s a little tedious. WEAR GLOVES! Also, Cerakote is an excellent wipe-on ceramic coating. It may have been equally good on the trim, but I liked that TBS contains carbon black.
I downloaded your guide and I found it very insight full and help full. I am starting out the trunk of my honda. Thank you for sharing your knowledge and skills!
How has your business been doing?
Best of luck to you. 🤙
How do you clean the weather teach floor liners. Practically every single customer of mine has them and I struggle to get prefect results. I use a drill brush, super clean, and a pressure washer but whenever the mat dries there’s always still dirt left on them
WeatherTech makes a cleaner for their mats.
Stoners trim shine. Returns them to black and covers up that little dirt you miss
"that step piece that i never remember what it's called" hahaha. SAME THOUGH!
Kick panel or step plate
LOL.
Which better comes first?using steamer and then brush with apc or brushing w/ apc and then the steamer?thank u
Hey bro love your channel. I have an impala with a white vinyl stained convertible top. What would be best to clean it, a steamer or extractor? Thanks
How do i know which plastics will be damaged by a steamer BEFORE the OH SHIT moment?
Hey man what do you use for interior cleaner? I'm using chemical guys and meguires. Would you suggest something better as these get pricey at 13 bucks a bottme
Just curious, how do you clean your dirty towels?
What would you do to detail an enclosed chrome trailer
What dilution ratio do you use for extraction on mats and seats
Will this work on mold also?
you could speed up your interior hard surface cleaning by 3x if you use a tornador
We have one 👍🏽
Do you dress the plastics after cleaning them and if so, what product do you recommend.
I like car pro perl it can also be used on tires
I would live to talk to you more about your knowledge
Thankyou so much brilliant!!
Hey man, just wondering how you detail in underground parking garages and stuff, do you squeegee out the water after before leaving or do you just leave it?
It's always best to clean after yourself. I use a microfiber mop. It picks up lots of the excessive water. There are people that complain and others that will take action against you. For me, I always work very clean without making a mess or spreading all my equipment on the floor. People are watching you.
I usually clean the seats and carpet first then plastics
Like this video nice and slow.
So I slowed your video down to .5 speed to watch the work closer to real time. Still not to bad. You just sound drunk when you speak. It’s pretty funny. Thanks for the info.
Kick panel or step plate
dont u have 2 dust??
"That's what she said" 🤣🤣🤣🤣
ParalegalNfashion bruh
The Office
solid info
What did you use to spray? What cleaner?
He uses super clean. You can find it at walmart and automotive stores I dilute it 10:1
@@tookie1864 thank you.I really needed this information!
Did I just see you shoot steam into the door speaker ????? That could kill the paper cone.
At 9:00 you steamed the speaker will that not damage it? I know you weren’t holding it in one spot but I still wouldn’t take the chance. Lol also 13:48 😂😂😂👍🏼
exactly what i was going to ask...
Your using super clean for the interior?
For the plastics, yep!
Oscar no pasa nada Al poner degreaser en la steamer
Sólo lleva agua
Hello👋👍🏽
That’s what she said- I’m dying!
hahaa
Good short video. "That's what she said" Politically uncool!! It'll come back to bite you.
Michael Scott inspired 😅
Is this comment a joke?
ruclips.net/video/l5c1fWKIR0k/видео.html
It's from The Office
Just use your steamer for the door jambs lol
bruh
Sup
I feel like you're going to slow bro..lol
That car is already clean. How about a car with coffee spills donut crumbs lots of dog hair and hasn't been ever cleaned with 35,000 milles on it. Really?
Omg that’s what she said 😂😂😂😂😂😂😂😂😂
Would you use a drill brush on plastics or usually no need?
Yes, just make sure you choose a brush that is not too stiff or you could scratch the plastic