Beko wmb washing machine door handle & hinge catch: how to replace
HTML-код
- Опубликовано: 6 мар 2018
- Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartsteam.co.uk/index?r...)
Find door handles for your machine here rover.ebay.com/rover/1/710-534...
www.how-to-repair.com/help/be...
this video will show you how to replace Beko wmb series washing machine door handle & hinge catch
this type of door has been fitted to many make like these:
Aftron, Ahma, Akai, Alien, Alpari, Altus, Andi, Ansonic, Arcelik, Arctic, Armani, Atlas, Axxon, Aya, Beko, Beta, Blomberg, Bluematic, Bluesky, Carad, Carrefour Home, Cellini, Codini, Connect, Crown, Defy, Delton, Donar, Elba, Electric Co, Elektra Bregenz, Elettrozeta, Elin, Eskimo, Euro, Euroline, Europa, Eurosky, Faber, Fagor, Federal, Fensa, Ferette, Fisher & Paykel, Flavel, Fortress, Fricon, Funix, Goldi, Grundig, Hajdu, Helkama, Houseline, Hyundai, IFB, Koncar, Lamo, Lamona, Magic, Majestic, Mercury, Mirage, Modena, Moritz, Nikkei, Nojintech, Nordfrost, Novox, Okean, Orion, Pacific, Pars, Peabody, Penguin, Perfect, Perfekt, Philco, Privileg, Prolux, Rainford, Reeson, Rotel, Saba, Saivod, San Giorgio, Sang, Sanyo, Siera, Sunny, Superfrost, TechnoStar, Technolux, Tecnokit, Tensai, Thor, Tophouse, Universal, Valenti, Venus, Vico, Victor, Victory, Wasco, Weltec, White-Westinghouse, Winson and Winstar.
Please remember to subscribe to our channel
ruclips.net/user/Apart4u?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline.
This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RUclips. / apart4u
Facebook. / how.to.repair.appliances 
Хобби
It must be satisfying to have a job through which one helps people. Thank you.
I was defeated by the task of reassembling the spring mechanism of a Beko washing machine (WMB 81641 LC). No combination made sense until I learned, from the video, that the spring is tensioned by the inner door plate, not the outer door plate. I'm most grateful. Phil
Same :D did try a different video for a slightly different Beko washing machine where this detail was not explained at all and I spend 1h+ on assembling and reassabling it over and over again and not understanding why the hook is tensioned the opposite way then it should.
I couldn't work out how the handle spring worked until I saw its orientation as you took the mechanism apart. Thanks for showing clearly how it all goes together - absolute lifesaver!
What a gem. I looked at the other video to undo the door not realising I didn't need to dismantle the machine so much.
However when I saw this video it made the tension on the spring of the handle much clearer when I saw how the clip had to sit.
Very happy with the result 😀
Really glad it helped you fix your problem Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Fantastic tutorial - I have just replaced the door handle on my washing machine. Many thanks for your help!
Yes! Thank you so much for this. I’ve now successfully repaired an oven and now a washing machine thanks to your class videos. Much appreciated 🙏
Thanks for the advice and guidance. We had a broken door handle, and bought the replacement from Beko website. Clearly the original was of poorer quality as the new replacement had been strengthened in the area of the break. The whole handle looks like it has been made to a heavier duty spec.
As to the removal of the door. After taking a look at the machine vthen others comments of difficulty with the wire ring, I wasnt keen at taking my chances, so held onto the retaining plate, using the slack in the rubber flange. With careful manipulation it was easy to remove the door with 2 people, although next time it could be done with one.
The biggest stress was locating the spring with mount when bringing the front and back together, and locating the screw holes or posts. But overall a 15 minute job with the right tools. Thanks again.
Dear Gentleman, this video is amazing, thank you so much, I managed to change the handle on my own. The instructions are really clear and helpful, thank you again.
I had to look at another video about opening it if the handle had failed but this helped me so much. Took me all day. Thank you very much
Thank goodness I found this video! Very helpful and much better than the “video” on the Beko website
I rarely comment but these one I can’t help but just say THANK YOU. Great work!
This video helped me a lot to put everything back together. I had dismantled everything in a bid to clean then started having problems putting them back together. Thanks
Great job! Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thanks mate, your demo has been very helpful for me, keep up the good work.... :)
Brilliant video, very straight forward and easy to follow. I fixed my broken handle in 5 mins mins, thank you
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thanks for this it was so much help! Mine was very ceased up so took a fair but to get it out. But the rest was a breeze.
Superb video. Very precise down to every tiny detail. Our Beko washing machine ( WMB ) back in use, thank you ! 👍👏
Really glad it helped you fix your problem
Thank you for this video. I had to change my handle and it was really clear. All fixed. I had to buy a .75 Hex screwdriver to undo the screws on the inside of the door. as they are not your standard phillips or flat head screws. Thanks again.
Thanks, I've been looking at what type they are and couldn't figure this out :)
This was great, my Beko door refused to open today and I had to go to the internet so I could find out how to force the catch and get my clothes out. Was going to call a repair man but having seen this, I'll be able to order the new catch and fit it myself. Ta muchly for the excellent tutorial.
Doing a bit of research and finding the right video has saved you some money. Thank you for spending the time learning the part will not cost you a lot. glad we could help you @sandymacpherson9400 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thanks. Worked a treat for my WM 7120W. I found it easier, though, to remove the door screws by the hinge and slacken the rest. That way, the door can be removed leaving the hinge still attached to the machine. Door seals can be a ****!
Thanks for the tip. Did this and no issues!
Thank you so much my machine door is now like new no more clothes getting stuck in there 🎉 cost £4 for new handle and job done. Very good explanation 😊
Glad it helped persona I would love you to leave your opinion on our poll about manufacturers building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
You are legend my friend thanks for help
Thanks for this it was just what I needed
Thanks, just fixed mine :) the spring / handle can be a pain but your video helped
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
There are several shorter instructional videos for this on the web but none so clear and all-encompassing. I wish I'd watched the long video first!!! :)
Excellent video, thank you.
Thanks v much .. really clear instruction video .. a great help.
Worked for me thanks!!
Thanks, very good, I managed it on the third go. 👍
Super helpful thank you!
So grateful for the video.thank you!!!
this video saved me!!! Thank you, thank you, thank you!!!
Thank you this video was extremely helpful! I did it with your help thank you so much.
Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thanks for the video, it helped a lot ! I could however remove the door without removing the seal: you can actually feel the metal plate through the seal, so it's possible to keep it in place by pressing it through the seal gently.
That’s a great tip!……I will try that when I get my replacement for broken latch…..as I am worried about splitting rubber seal and getting the ring that holds it back in place….
Look at my post….after that this will be a doddle with your tip adding to the tutorial🤝🤝🤝
Pip Dennis
Some great tips to stop you making a mess of this. Really helpful. Thanks
Glad it was helpful!
It was very helpful thank you very much
Slightly easier way of replacing door is leave the hinge on and just take out the screws. When you put it back only put in the catch screws plus 2 either side. You will then be able to easily spread the hinge area enough to clip the door back into the hinge. Gently squeeze the outer and inner frames together and redo the rest of the screws. Saves a bit of time and fiddly work by not taking the hinge off.
Very helpful, thank you!
Wow
Simple
Brilliant
Fast easy
Thanks
thankq very much dear technical team
thanks took an hour but great video..
Hi mate. I have the wm74135w version but seem to be having trouble with the washer not knowing the metal safety thing is in the hole when I assemble the door back. I know the electronic part is ok as I can get it to latch on and think the door is closed by pushing it in which then would start. I must be not putting it back together correct. I know at the start of this video you do say you have one for the WM series but I can not seem to find it. The spring etc looks pretty identical to this one in the video but obviously must be different for you to make another video. Cheers if you can help.
What kind of screwdriver head do I need to use? I would like to change the door handle, but I found out that I am not familiar with this type of screwdriver head. Thank you so much
mine has just snapped, thanks for the video
Hi my door handle has snapped when I replace it do I have to buy new spring latch and pin thanks
Nice video thanks
Thanx for movie I replace mine too with ur help thanx !
Great video. Many thanks. But I wish I hadn't bothered to take the door seal retaining wire off. Replacing it took twice as long as the rest of the job, and wasn't really necessary. With a little care the back hinge plate would have stayed put. All happily sorted now though. Thanks again.
Where to buy the pecker
Mine is broken
Thank you
Which way round is the spring I’ve tried all ways no tension 🤔 please explain you don’t explain
Hi I just replaced my handle. I resolved this issue where the spring is not working. Basically the 2 bits that stick out from the spring need to go into some plastic that stick out on the other part of the door. So the other part does not go straight over. You need to slide it so that the spring part is in position and then push it down. It will hold tension and you can test the handle at this point if it is working as normal. Hope that helps
Hi i cant get the handle spring to work propley so the door can close. Ive tryed everything but its not working. Door doesnt close
Can please tell me how you fixed this issue at the end ?
7880 views...no comments ?...job done ...thank you...
Sorted cheers mate!!
Is it not possible to replace the handle without removing the door ? Because of the placement of my machine I can’t access the screws to remove the entire door :(
Thanks a lot ❤
Glad we were able to help you. Hope you had a good New Year. Please remember to subscribe to the channel as that helps us
glad we could help you @silviairinapires3395 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thanks a bunch
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thank you so much!
I'm glad this video helped you fix you appliance please remember to subscribe to the channel as we do live shows on helping consumers fix them appliances on a monthly basis
cheers boss xx
Tried 3 times but the door wouldn't close, no idea why. Then I thought maybe the hook needs to be the other way... Now it closes but can't open it back up. Any tips?
This video made life so much easier to fit new washing machine door handle and what cauld be better for Han DPD delivery 5 stars for all round service
The handle of my WMB has snapped whilst trying to open machine. How do I open it to repair.
@@seanmcclean7124 check on RUclips. There is a video showing how to access the door catch, but it does require loosening the front of the washing machine.
Hello.
Already replace this plastic handle for new one, but...
When i put all together back, and mount door on the washingmashine and trying to lock door, they won't lock, i mean doors are close but it should be also sound " click " then doors are locked. My doors wint click and lock.
What the hell is qrong, cause i spent on it 2 hours, looks very easy but something wrong.
Hi 😃
Can I do the repair without taking the door off completely?! Just removing the torx screws and taking the back of the door off while the door is still attached to the machine?😖😝
My catch is moving when put it back together help?
Hi, just wondering, if you could guid e me on how to fix beko WMY 8046 LB2 door latch please. I cannot see any screws in the door to open it, so that i could fix it.
small hole, stick screwdriver inside and press on tab, then twist front bezel anticlockwise
So I've done everything step by step but the handle seems very loose and the door will not lock shut when I close it. Any ideas where I might have gone wrong
Can you please tell me how you fixed this issue at the end?
Is your machine the same as the one shown? Did the door close and lock prior to you dismantling it? Have you changed anything and was it like for like? If everything is and was the same size, check the orientation of the catch ; is it the wrong way round, for your machine?
Understood everything except “the springs need to be facing backwards” ??
Hi Paul the hinge plate has fallen into the machine what do I unscrew to get this back?
Magnet 😆
I need to know the orientation of the spring - it does not work on mine and its an absolute beast to make it work...
nevermind, i got it after blowing up the video on my wall... first of all, the wmb series catch faces outward. secondly, the spring outer feet is also facing the same direction as the catch. third, the springs horizontal bar must be facing opposite of the catch. fourth, when installing, make sure the outer plastic is on first, by aligning both of them - there is a vertical slit on the front facing cover, which you need to align with the rear facing cover. once u get them aligned pop everything in and screw it in place. and you are good to go.
I have WMB series and handle has broken off. How do I open the door first? HELP
ruclips.net/video/-65_eoT6zuk/видео.html
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
@@How-to-repair Thank you - I saw the string/fishing wire trick in your reply link this morning. Replacing the door handle looked a bit complicated for me to do on my own (my husband and I would probably have tried it together, but he sadly died last December), I found a local washing machine repair man who came yesterday morning, used string to open the door and then removed the door and replaced the broken handle. (I thought the £63 inc handle was reasonable - OAP rate). I'm not sure I would have had the strength/ability to undo screws or enough hands to put it all together again, so I think I did the right thing .... but that doesn't detract from your RUclips video which would have helped in different circumstances.
Hi do you know I can get the door open without the handle? Because the handle broke off and I cannot open the door:(
Get a screwdriver in there and pull the remaining part of the handle towards you.
Could you do it without actually taking the door off
Hi, that’s a very useful video!!!……my latch has broken across in a different place than you suggest they might, and managed to get washing out by using a dinner knife to slip behind the bit of catch still on door luckily enough.
I did undo as you did….but my door was still on the machine…..well it was until the glass came away and I had to put it all back together….leaving the backing off so as to get door back on hinges before tightening up….
LESSON LEARNT:-…..check you tube for help first …THANK YOU🤝🤝🤝…..when my replace the catch comes I will replace it as you have shown…..but I am a bit wary about splitting the rubber when taking off the ring that holds it on to get at the hinge😧
KEEP UP THE GOOD WORK AND THANKS AGAIN!😎😂….Pip Dennis
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Can get any force on the door pekker unit
Follow the video its simple.hardest bit is the spring tention.
I have broken the handle and can't open door , how do I get door opened model WM6 123W
ruclips.net/video/-65_eoT6zuk/видео.html
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
hi, ive replaced the hinge but the door wont now close properly. its like its not aligned . please help!
Can you please tell me how you fixed this issue at the end ?
how dose one get the door open when it is closed and the latch dose not work
You've probably fixed yours, but for anyone new:
The 'correct' way would be taking the top off the machine and working your way down. However, GENTLE force with a crowbar, or large screwdriver, forcing the door towards the hinge should pop it open. It did for mine...
But how do I get the door open when the handle has snapped off to replace the parts?
The back plate for the door hinge has fallen..😤 how do I retrieve it please.
2 methods to get it back. Shake the washer until the plate falls onto the floor under the washer. If it doesnt come out remove the front of the washer. 3 screws at the bottom under the bottom piece at your toes. Remove them and push down on the door frame. When the front moves down just slide it away and reach in for the fallen piece.
my handle while the door was shut, i cant open the door
took me all day and god knows how many repeat attempts because there was no detail on getting the spring in the right position when you connect the 2 sides of the door again so we kept ending up with no tension in the handle. Otherwise thanks
I think I have this problem can you explain what you did to fix it? My door goes in but the lock does not hold and it slowly opens not sure what I did wrong
@@zarzeckak312 i have the same problem!! Did you manage to solve it? Please help😂
I want to buy door handle
we will need model put it in our search www.how-to-repair.com/
Now if only there was a video on why my Beko (video up loaded) is stuck on Start and won't do a thing 😣
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
I have no bolts on inside of door
Sometimes doors are clipped together, but without knowing the exact model number, you will have to look closely how it comes apart. Hope you had a good New Year
glad we could help you @dshtas this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Sorry mate not explained clearly enough how the spring locates on the surround 5/10
Sw