2005 Tahoe Knock Sensor Relocation | Finally Solving Knock Issue | Codes P0327 & P0332

Поделиться
HTML-код
  • Опубликовано: 5 янв 2025

Комментарии • 7

  • @carlwilson867
    @carlwilson867 10 дней назад

    Starting in January, 2025, Texas eliminated vehicle safety inspections for passenger vehicles, but passenger vehicles will still need to pass emissions test in the following counties. Brazoria, Collin, Dallas, Denton, Ellis, El Paso, Fort Bend, Galveston, Harris, Johnson, Kaufman, Montgomery, Parker, Rockwall, Tarrant, Travis, and Williamson. The only passenger vehicles exempt from emissions testing are those that are 25 years old and older.

  • @kennethgrossman289
    @kennethgrossman289 Месяц назад +1

    I am tempted to try this. I just will not be installing them under the intake. They will go to either the side of the block where they will be at on the 6.0 when I swap out the 5.3 in my silverado or on the heads. I already have the relocation blocks mounted on the new 6.0 ready to go into the truck when I get the extra cash for everything else I am wanting to install when the 6.0 goes into the truck.

    • @CHEVYLYFEGARAGE
      @CHEVYLYFEGARAGE  Месяц назад

      Thanks for checking out the video. I should have brought the relocation blocks when I decided to relocate them. I know I’m gone swap my 99 Yukon to 6.0 as well and will definitely relocate the.

  • @jeffalan6339
    @jeffalan6339 2 месяца назад +1

    I bought the Delphi sensors, and harness. I get P0327 I have considered putting the old sensors back in place.
    I plan to trouble shoot before removing the intake again spend $100 on the gaskets spend few hours replacing and removing everything.
    Though could be the gas as well filled up at different gas station wonder the code P0300 was the gas station that just set the returning code.
    I used ethanol when gas was $5.a gallon used two ethanol to go ne regular at reputable gas station.
    I cleaned the injectors after considerable time and money trying to get rid of ,0300 code, now to trouble shoot the 0327 code.
    I used brake kleen the injectors had wood glue color coming out as I sprayed until the cleaner came out clear.
    Might be just the gas.
    Soon find out

    • @CHEVYLYFEGARAGE
      @CHEVYLYFEGARAGE  2 месяца назад

      Thanks for checking out the video. If you are getting P0327 that’s knock sensor. These auto part store be careless when handling the knock sensor as well as the shippers. I changed my knock sensor 4-5 times before I cleared that code. I did orielly advance Amazon and eBay all came out giving the same codes. Then I did Napa and cleared right up