An axe with an octopus. 2 months of work. Drawing on metal. Simple technology from a rusty axe
HTML-код
- Опубликовано: 7 дек 2023
- Hello!!! In this video I tried to make a new good ax without forging from a damaged old ax using an octopus - devilfish pattern on the metal. How did I manage to restore the old ax?
Hi all. This time I want to restore an old rusty ax into a new ax with an octopus’s design on the metal. After working with this ax for 2 months, I got a good ax with a reinforced cutting edge made from a car spring. The complex pattern on the metal gives the ax exclusivity. I wonder how much such an ax could cost? How do you like my work?
I used an old ax as the basis for the new axe, the ax was in poor condition, the mark was damaged by rust, and I could not read it. The cutting edge was completely worn out, which had to be cut off during the work, strengthened with carbon metal from a car spring and hardened in a homemade forge by heating it and lowering it into water. Next, I decided to give this ax the shape that I came up with myself. What I've done? Cut off unnecessary metal. Cleaned and sanded. When the blank was prepared, I decided to put on it an image on the theme of an octopus in the depths of the ocean. After electrochemical etching of the metal, I blackened the axe. When the old ax was completely ready, I decided to decorate it with paints. I was pleased with the result of this work and I hope you liked it too.
Dear friends, if you decide to repeat what you saw. Don't forget to follow safety precautions. Gloves, mask, glasses, etc. And what you see is just a flight of creative imagination, and not instructions on how to do it. Thanks for understanding!
TO SUPPORT THE AUTHOR: If you have the opportunity to support me!!!
Donat - www.donationalerts.com/r/miha...
With your support you help this channel develop!
Thank you...
#howtodraw #engraving #drawing #metaletching #howtomake 
Хобби
Hello!!! In this video I tried to make a new good ax without forging from a damaged old ax using an octopus pattern on the metal. How did I manage to restore the old ax?
Привет!!! В этом видео я попробовал сделать из испорченного старого топора, хороший новый топор без ковки с нанесением рисунка осьминога на металл. Как мне удалось восстановить старый топор?
TO SUPPORT THE AUTHOR: If you have the opportunity to support me!!!
Donat - www.donationalerts.com/r/mihailkupec
With your support you help this channel develop!
Thank you...
Try rubbing your pencil stencil with a burnesher or thumb nail .save you lot off time .nice work .
@@Crosshatch1212, Thank you. I tried this before and it didn't work for me... 🤝🤝🤝
@@MihailKupec cheers mate it might be due to it being metal ,you cld try laying light spray of fixative let it dry ,I’ll be finding a way to.cheers lovley work
@@Crosshatch1212como se llama ese papel para trasferir los dibujos soy de México gracias
That is seriously off the chain... now all you need is a handle made of driftwood with some barnacles for better grip. Awesome job on that.... RELEASE THE KRAKEN !!!!
Thank you 🤝🤝🤝. Cool idea with driftwood and shells... 👍
What a beautiful axe, love the marine theme with the octopus and the light tower. The composition really flows over the axe.
Would love to have this in my home 🏡
🤝🤝🤝
Классная работа!!! Аккуратно и со вкусом!Продолжайте коллега!)
Спасибо... 🤝🤝🤝 Творческих Успехов!
@@MihailKupec стараемся),🤝
Mihail widac , że sie rozwijasz twoje projekty są coraz ciekawsze, bogate w szczegóły, mnóstwo pracy. Wspaniała praca!
Dziękuję 🤝🤝🤝
Magnifique boulot, chapeau l'artiste 🤩
🤝
Гарна робота!
🤝🤝🤝
👍24. Quedo hermoso este trbajo, saludos desde Uruguay 🇺🇾 colega👋👋👍
👋👋👋 Gracias... 🤝🤝🤝
Очень красиво получилось!👍
🤝
This is BONKERS!!! I want one. ❤️
Muy bonito, excelente trabajo
🤝🤝🤝
Шикардос!
🤝🤝🤝
Awesome work of art. I am so impressed with the level of etching control you get with electroetching instead of using acid. I love your theme for this axe, my favorite of yours so far. Thanks so much for the videos they are great teaching tools. I have yet to try the dot engraving and oil paint to enhance shading, but I really love how it added to your piece. Does the oil paint hold up well over time? Thanks again for sharing your amazing work.
Thank you. This is my first experience working with oil paint, but I think that if you apply a protective layer on top, it will last a long time. Creative success! 🤝🤝🤝
Alright. This is the second video I have watched so far from you. So far... I do not possess a vocabulary vast enough to adequately compliment you. I will instead tell you this. You somehow managed to shrink down 2 months of your time into 15 min. Somehow I managed to turn a 15 min video into 2 hrs from pausing it so many times. Enough to the point I decided to screenshot it just so I could zoom in and get a better view of all those details. Just mind numbing intricacies well beyond any brain freeze. The little things I caught while watching your video we're very comforting to me to see someone else who appreciates bringing items back from the grave. Either giving them a new purpose or turning them into art. Even if this piece was rediscovered in 1000 years they would ultimately wonder how was this possible? I believe if vikings still existed they would be rowing across any sea for a chance to aquire your axes. Keep your stones true Mihail and you will never lose your edge. STAND TALL & HOLD FAST P.S. thanks you
Thank you! Your comment inspires me to do new work. Sincerely... 🤝🤝🤝
Trabalho maravilhoso. Que ferramenta manual é essa que vc usa pra entalhar o metal?
Obrigado. Chamamos isso de moedor (se o tradutor traduziu corretamente) ele corta com discos de corte para metal
Добро🐻
🤝
Круто очень круто, интересная тема 👍👍👍👍👍
🤝🤝🤝
Очень хотелось бы узнать, что за плёнку вы использовали при переносе рисунка на топор?
@@nikolai_80 Лавсановая бумага
@@MihailKupec А падскажите пожалуйста где её можно купить?
@@nikolai_80, Мне её друг отдал, что было. А так не знаю...
Робота супер!!! Подскажите пожалуйста чем покрываете метал чтобы не ржавел. Ато сделал нож через неделю пошла сыпь
Спасибо... В данном случае я лаком покрыл. А на счёт ножа не знаю, что лучше. Знаю, что за ножом ухаживать нужно, если что окисляющее порезали, следует помыть, высушить. При хранение маслом или средством специальным смазать. От металла зависит, какое к нему подход требуется... 🤝🤝🤝
😂класс🎉
🤝
Welche Folie die man durchzeichnen kann verwenden Sie?? Danke Karl
Pauspapier, Kohlepapier, Pergament, Lavsanpapier, alles, was die Zeichnung überträgt. 🤝
Сколько стоит такая работа?
Did you have a website for purchasing any of your projects?
I live in Russia, sometimes I sell my works within my country.
That's too bad. It's amazing work.
@@danepedersen3029, 🤝
Evening
I have seen wuite a lot if yr work and would like to know if i could comition a Harley petrol tank to be done by uou, pls let me know when you have time if it would be possible for you to do that.
Hello, it would be interesting to try, but I think there will be a problem with delivery, since I live in Russia
@@MihailKupec thanks for your reply, I live in England, I'm sure I can still post things to Russia but I will check to find out, if so I would really fancy some of your work, do you have an email, or WhatsApp, or do you use telegram? On I find out if I can post okay, we will have to find away of swapping details, so it's not done on here, once again thank you so much for your reply.
John
@@Shovelhead.76 You can write to me by email in the description of my channel. The main thing is that the language barrier does not interfere...))) 🤝