Seems to be the exact same as my 79 Chevy trucks thought I’d have to pull the whole column apart to feed the wires I’m glad someone decided to do it a simple way and save me a lot of time thank you
I usually dont comment on videos but thank you for helping people out and doing it step by step and without background music thanks to your video i did mine right now i appreciate it bro hope you do more videos like this
I really appreciate this video. Just got an 83 t-type and your video helped me a ton when replacing my turn signal switch. I appreciate the way you explain things and the camera work. Good looking out.
Thank you my friend your video helped me on my steering column repair love to see the progress on the regal..I got a 1980 chevy caprice 2pump 6 batts.much love from pomona California
Damn. I gotta do the same. Left blinker stay stuck. Maybe just cleaning out the contact points at first. If not, I'll try this out. Thanks for the video.
Gracias por tu video- estoy bregando en el 83 buick, la bocina no me suena y no se cual es el cable que llega al frente, en estos momentos estoy bregando en el, si tienes un conocimiento dime cuales son las falla mas comunes pra que la bocina no suene- chequee fusibles y todo bien la bocina bien--por fabor estoy enredado en este proyecto..contestame
Tha ks for the breakdown. I'm shopping for the switch assembly that has the side turn signals with little luck. Anyone know a part number or manufacturer?
Man bro I’m definitely subscribing to your channel you should do a video on how to adjust the cable shifter so that you can line up the gear your in I need to adjust mine
Welcome to the channel... thank you for watching....🤔 I'll definitely make a video on that in the future.... my '79 has that same issue... thank you for the suggestion 👊💯
please-im working on my buick regal- the horn doesnt sound, check the fuses on everything is fine-check the horn and everything is fine--- how can you help me to correct the fault--tell me where you found the part for the side lights with the wiring-- it is possible thatt this piece is the one that is causing problems thanks-- and tell me the name of the extractor yo used....
While removing the horn pad on my '87 Cutlass Supreme I seem to have broken the plastic sleeve which holds the spring-loaded wiring connection for the horn. Do they make a replacement sleeve?
I would suggest you check your ground wires and also your fuses before replacing it again. If all of them went out the same time, it could be a problem beyond the column.
Thank you 🤝.. I had thr speakers installed by a shop a very long time ago. They sell these nowadays. They're called kick panel speakers. Hope that helps. Thank you for watching 💪💯
@@StillStandingGarage ok that's was what l was afraid of wanted to do it my self well one day will have to take it to the shop meanwhile can't drive it a Night
I rebuilt 2 of these saginaw columns back in the day... Still a PITA! lol Thanks for the video. Had to refresh my memory!
Nice! 💪 thanks for watching 🤝💯
@@StillStandingGarage my pleasure
Seems to be the exact same as my 79 Chevy trucks thought I’d have to pull the whole column apart to feed the wires I’m glad someone decided to do it a simple way and save me a lot of time thank you
I'm glad it helped you. Thank you for watching 🤝💯
I usually dont comment on videos but thank you for helping people out and doing it step by step and without background music thanks to your video i did mine right now i appreciate it bro hope you do more videos like this
Nice! I'm glad this video helped you out. Thank you for watching 🤝💯.
Great video man!!! Thank you for explaining everything!!! You just saved me!!!
Thank you! Appreciate you watching 🤝💯
I really appreciate this video. Just got an 83 t-type and your video helped me a ton when replacing my turn signal switch. I appreciate the way you explain things and the camera work. Good looking out.
Thank you! Glad it helped you out. Thank you for watching 🤝💯
Im 53 have a 1977 nova and have a beast of sound system have to have good loud tunes in ur car .. Great vid Bud!
Nice! I bet it sounds good. Thanks for watching 🤝.
Crystal clear - Good details- My 88 Jeep Cherokee is similar to this steering .
Thank you for sharing.
Like & Shared
Thank you for watching 🤝💯
EXCELLENT VIDEO!
I have an '84 Caprice, I need to do what you did, now I'm not afraid to do it! Thank you!
Thank you! I really appreciate it. Thank you for watching 🤝💯
Gracias a tus videos pude arreglar la columna de mi el camino saludos desde Virginia hermano te agradesco
Eso es todo! Saludos 🤝 💯
Thank you. Helped me a lot on the Elco
No problem. Glad it helped out. Thank you for watching 🤝💯
Thank you my friend your video helped me on my steering column repair love to see the progress on the regal..I got a 1980 chevy caprice 2pump 6 batts.much love from pomona California
I'm glad my video helped 👊💯 Nice! Them caprices are clean 🔥🔥 thank you for watching 🤝 💯
Great job compa now ima fix my signals
Eso es todo! Gracias! 🤝 It's always good to hear that these videos help others. Thank you for watching 💪💯
Man I had to stop it, run it back. Would have like a extra 40views. Much love to you man. Came thru on that one. Got mines down thanks to you! 🙌🏽
Appreciate the love and support. Glad this video helped you on yours. Thank you for watching 👊💯
Yup totally helped me with a friends car. Tyty!!!
Nice! Thank you for watching 🤝💯
i had to swap it on my 78 nova....same process....👍👍
Thanks for the video its helping me out a lot. I have a question why not just cut the wires
No problem 🤝. Yeah, you can do that, too. I didn't want to cut mine just in case I needed to put it back in. Thank you for watching
@StillStandingGarage make sense thanks!
Thank you for the film. I have the same shit in Buick Park Avenue 1991. Regards from Poland.
Thank you for watching 🤝💯
Great video bro I needed this for my 87 GN. Please do a video for the fillers next
I'll definitely make a video on them fillers when I get to it 💪💯
Damn. I gotta do the same. Left blinker stay stuck. Maybe just cleaning out the contact points at first. If not, I'll try this out. Thanks for the video.
Thank you for watching 👊💯
thanks man I have the exact problem imma try it out and see wassup 🤙🏻
No problem 👊💯
Great job buddy!!! Very good video!!
Thank you for watching 🤝💯
Damn that radio is bad ass... fucken old school.
Thank you 🙏.... I was happy I was able to put it back in 😎
Getting all my wires done
Nice!!
Check Dimer switch might need replaced for sides lights had to replace mines on my 85 cutlass none of my front lights would work at first
I sorted through all the wiring using the wiring diagram for this car. All my lights are working how they're supposed to now.
thanks for the details
No problem... I hope it helped. Thanks for watching 👊💯
😊great video
Thank you!! 💪💯
Hell yeah great video
Thank you for watching 🙏💯
Gracias por tu video- estoy bregando en el 83 buick, la bocina no me suena y no se cual es el cable que llega al frente, en estos momentos estoy bregando en el, si tienes un conocimiento dime cuales son las falla mas comunes pra que la bocina no suene- chequee fusibles y todo bien la bocina bien--por fabor estoy enredado en este proyecto..contestame
Para decirte la verdad tienes que seguir el alambre desde la bocina hasta enfrente para saber si eso es el problema
BAD ASS SHIT HOMIE. WE NEED THIS HELP. THANKS.😷🇲🇽💪🏽👏🏼👍🏼🙏🏼
Thank you! 🤝🔥💯
Good video Homie 👍🏾
Thank you 💪💯
Tha ks for the breakdown. I'm shopping for the switch assembly that has the side turn signals with little luck. Anyone know a part number or manufacturer?
Man bro I’m definitely subscribing to your channel you should do a video on how to adjust the cable shifter so that you can line up the gear your in I need to adjust mine
Welcome to the channel... thank you for watching....🤔 I'll definitely make a video on that in the future.... my '79 has that same issue... thank you for the suggestion 👊💯
please-im working on my buick regal- the horn doesnt sound, check the fuses on everything is fine-check the horn and everything is fine--- how can you help me to correct the fault--tell me where you found the part for the side lights with the wiring-- it is possible thatt this piece is the one that is causing problems thanks-- and tell me the name of the extractor yo used....
While removing the horn pad on my '87 Cutlass Supreme I seem to have broken the plastic sleeve which holds the spring-loaded wiring connection for the horn. Do they make a replacement sleeve?
Yes, they do. Check rockauto .com or autozone. Those are not expensive at all.
Looking good
Thank you!
We changed this on my dads 85 Cutty last year, but brake lights & turns stopped working again last month. Think we got to do this again?
I would suggest you check your ground wires and also your fuses before replacing it again. If all of them went out the same time, it could be a problem beyond the column.
Great vids , where ya get ya front speaker and make them fit down there? Thanks👍🏼
Thank you 🤝.. I had thr speakers installed by a shop a very long time ago. They sell these nowadays. They're called kick panel speakers. Hope that helps. Thank you for watching 💪💯
This channel is dope homie...
Got my sub...
Appriciate it 💯 Welcome to the channel 🤝
@@StillStandingGarage i hit the bell too homie...
@@fernbirdENT That's what's up!! I just subbed to your channel...I'll be checking out them videos 💯💯
@@StillStandingGarage right on bro
Good video bro
Thank you for watching 👊💯
Nice
Thanks 🙏💯
sweet
Appreciate it 🙏💯
"Bundle of joy" wires. Ha. Yeah definitely. Good job.
Lol... thank you 👊💯
What’s the tool used to do the spring after steering wheel is off
I have a link to it in the description of this video. Check it out. Thanks for watching 💪💯
Did you try the blinkers with the head lights on?
🤔 I haven't tried that yet... will try it next time I turn it on. Thanks for watching 🤜🤛💯
you might have to swap those turn signal bulb connectors wires in the front..or clean-light sand the terminals first...
Good idea...I'll check that 👌 Appriciate it.
When you going to change the steering wheel to the wood steering wheel
I'm keeping it stock for now 💯
Cut the end of the old one comes out quick .
Yeah that works too 💪💯
Ok now my low swich dont work l only have high beam's is the turn single swich the proplem or is that something else
Was it working before replacing the turn signal switch?
My turn sigle's allway's work it's my low beam's don't work just my high beam's work it doesn't click back for my low beam's
You would have to check the mechanism in your colomn to see if anything is broken
@@StillStandingGarage ok that's was what l was afraid of wanted to do it my self well one day will have to take it to the shop meanwhile can't drive it a Night
Yeah that sucks.
Swing by
Always cut the old one and use it to fish the new one through
That's works too 🤝💯
What do you mean exactly? How do you use the old one to fish the new one through? I ask because I have to do this soon.
Why is this owed to me!☹️
Swing by and peep my vid homie