[REVIEW] Nerf Elite 2.0 Turbine CS-18 | The New Rapidstrike
HTML-код
- Опубликовано: 2 авг 2024
- Buy on Amazon: amzn.to/2FxXAXN
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MERCH: a.co/4fdvjwk
INSTAGRAM: / coop772
SECOND CHANNEL: / coop772two
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0:00 Intro
0:13 Unboxing
0:36 Blaster Overview
3:16 Firing Demo
4:25 Firing Analysis
4:52 Conclusion
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Развлечения
![[REVIEW] Nerf Elite 2.0 Motoblitz | SHOTGUN INTEGRATION!](http://i.ytimg.com/vi/BHSyWsG7VzQ/mqdefault.jpg)
![[REVIEW] Nerf Elite 2.0 Motoblitz | SHOTGUN INTEGRATION!](/img/tr.png)
![[REVIEW] Nerf Elite 2.0 Echo CS-10 | The New Retaliator](http://i.ytimg.com/vi/D_HM4Iiarzc/mqdefault.jpg)
![[VS] Nerf Rapidstrike vs. Nerf Hyperfire | Which is Better!?](http://i.ytimg.com/vi/mMARiyrURlA/mqdefault.jpg)
![[REVIEW] Adventure Force Spectrum | "Dart Zone Stryfe"](/img/1.gif)
Nerf: Releases Alpha Strike line
Also Nerf: “Hey, these blasters saved us a ton of manufacturing money... let’s make everything like this but not drop the price which was the whole reason people put up with it! 😃”
Meanwhile at Dart Zone: Here's a war-practical revolver for 5 bucks
@@kabelguy70 Bruh I'm dead
Kaleb Green If Dart Zone releases a new blaster that is equivalent to the Turbine, it’s game over.
@@skylarmccune9242 Not Dart Zone, but the Air Warriors Brute is a thing that exists and offers much the same performance as the Rapidstrike/Turbine at about half the cost.
As true as that may be. If I remember correctly, the Brute holds like crap
Me bracing for impact as Frank moves over to the trigger guard and mag release
O H S H I T
*HERE IT COMES*
G E T R E A D Y
@@o-v-e-r-l-o-r-d Ghost mah boi! How you doing???
Mag release not THAT bad, frank just doesn't know how to use it
Elite 2.0 and Ultra are literally the meme It’s evolving, just backwards.
Even the new N strike Elite guns are the same, the delta trooper is the best gun to explain this, The retaliator looks better, better ergonomics, better grip, better attachment better everything
@@CubeRazn But delta trooper has slam fire
@@bbjtan795 deltra trooper is trash, I broke mine without even pulling a lot of force on it...
I've seen this comment in another video some time ago...
@@XboxgamerZ must've been a lemon. Mine was flawless.
“They don’t want me in there, and that’s just annoying.” - Coop772, 2020
Let me in, LET ME INNNNNN!
Let me in.. Let me in... Let me fuckin in!!!!!
"If you dont like the included mag, you can use something else"
*Proceeds to pull out 50-round drum*
yes, we watches the video
@@truehuskym I agree, he indeed watched the video
Plussyking29 yes, they did watch the video.
What Mags are compatible with this blaster. bought it for my son and he obviously wants to be able to have more than one. I know in the video he mentions it but there is no link or info for a complete newb that doesn't want to buy the wrong one.
@@henryjohnson3828 Most nerf mags should work with this one since most nerf blasters use the same magazine. I’ll send some examples in a bit
Can we all take a step back and realise how better coop is looking? He seems to really have worked to better his health and I have so much respect for his ability to do that and keep doing it.
Yes we can . But will we?
Regardless, he still looks healther than I.
He it’s doing well
And he looks like Lewis Capaldi
His hair is freakin fabulous
@@nate-musicandplaylists1718 yes. yes we will
"What inspired you to make Elite 2.0 as cheap and unmoddable AF?"
"MONEY"
More like "we hate money and are trying to commit economic suicide"
all the money went into making the electronics modproof
Nerf before Ultra and Elite 2.0: We love our fans and we have QUALITY blasters.
Nerf after Ultra and Elite 2.0: Hello, I like money.
Okay, the blaster is cool, but are we just gonna ignore how absolutely fabulous Coop's hair is?
You are right!!
Haha 😂
Glorious
Hell no. Hes like prince Charming
He do be looking fresh do
At this point it feels like Hasbro just doesn't care about the quality of their products. As long as it "looks cool" it's going into production no matter how frustrating to play it can be due to bad design or just to save some little cents.
When will they realize that saving cents isn't worth the reputation loss?
they do look cool tho
@@gazoofio yes, i agree with that. If they had made them with screws and made them like every other blaster in elite, and upped the performance, they really could be elite 2.0
A Human 2 in my opinion I dont really like the looks, I liked the N-Strike to N Strike Elite 2016 era of Nerf when the grips were comfortable and had finger grips and the paint jobs were done on TWO sides
I'm gonna switch to X Shot if they keep this up
I love the turbine. Insane fire rate. There is basically no delay between pulling the trigger and firing. And it looks sweet. Kinda like a UMP-45. The only problem is the magazine release. I have to use the thumb of my firing hand to press it. Probably the best elite 2.0 blaster.
There is a youtuber that made a youtube video that fixed the mag release of the turbine go wach it its not that hard to do it
4:00 the real accuracy of waffles🧇
“I know nerf can do better than this” that seems like the norm right now
I would like but its at 69 sooooo
Nerf has just been pretty lackluster this year so far. Can't be too harsh since coronavirus but still.
@@Joseph_Stalin5 Then dart zone comes in , "i think nerf won't ever do better than this"
@@Joseph_Stalin5 Shuddup Stalin you're dead
@@ozkan576 ok I'll go back to sleep in my tomb
nerf: we cheaped out on the blaster and sell them for even more
Lol so true
The mag release does have a plastic "leaf sprig" that is way too stiff. I made it much nicer to use by cutting off the plastic "spring" part then glued a small compression spring onto the back of the mag release catch that pushes against the inside/back of the mag release button. There is a vid on YT about it, search for nerf turbine mag mod or something. Like Frank said, the position isn't a big deal, it's the fact that the button is so hard to press, and doing this mod makes it quite comfortable in my opinion.
Oh BTW, you will need to split the blaster open, which sucks a bit in comparison to older blasters as there are clips holding the halves together (mine didnt have any glue, may be because its an Australian model?). But to be honest, with a thin flat-head screwdriver for prying the seam apart and releasing the clips, then a wider screwdriver for tweaking and holding the halves apart, its not that big a deal, it's just a new skill you need to learn to mod Nerf blasters (I would obviously prefer all screws still!).
PS: The blaster does feel and is much cheaper (to manufacture) than older models. The tac-rail buttons are all part of the shell, so if that breaks it's a very tricky fix, all the plastic leaf springs instead of actual springs are cheaper but not as smooth and the clips that hold the blaster together are obviously cheaper to mold into the shell and just clip together than having separate screws that need to be installed by someone or something.
PPS: The grip on this blaster is not very .... human compatible. It has a lot of unnecessary sharp angles etc compared to its "predecessor" the rapidstrike or other older models.
This blaster is basically: Good Idea, Bad Execution.
i really want it for that hyperfire rof but the mag release just seems to be too bad
@@thechristfollower1723 But how? It's the Hyperfire ROF with the general ergonomics of the Rapidstrike. That sounds like a pretty baller idea to me
@@narnianninja4964 Eh. Nothing that a good modder can’t do with a Rapidstrike, or a Stampede even.
so is communism
Im just gonna put my two cents here - most of the problems of the elite 2.0 series could be fixed if they just *didnt seal up the blasters completely.*
Back when i bought my Helios, it didnt take long for it to completely seize up, so much so that i needed to take it apart and lock a certain piece in place to fix it. Afterwards, i havent had a single problem with it. If it was elite 2.0, i would not be able to do this. Not only that, but the absolute most basic kind of cosmetic mod, painting the blaster, is best made when its taken apart. Again, elite 2.0 blasters are sealed up, preventing any kind of modding whatsoever.
Combine that with all the other horrible blunders of individual elite 2.0 blasters, and the only question that comes to mind is "what were they thinking!?".
The only reason nerf sealed up the blasters is so they could take ur money when it breaks
Someone in their production ideas took a blunt hit
@@mrsoisauce9017 yep. Honestly its just so annoying. I heard someone in tgis comment section say that off brand blaster companies are beating nerf at its own game
@@ahuman2695 at this point Nerf is becoming the off brand, with Dart Zone picking up the slack with some of the best products yet seen on the market
@@josefsieffen18 yeah. Dart Zone is actually great. I got a $5 dart zone 4 shot revolver (top prime) and its fricking awesome. Even when i left it primed for a whole day it still worked great. Dart Zone is about to become the new nerf
Elite 2.0: hey bro can I copy your homework (blaster)
Elite: sure just change it a little so the teacher (nerf fans ) don't notice
Elite 2.0: (makes cheap versions of existing nerf blasters... Also super glued it shut hiding le jolt inside)
@Orca lee he can’t do dat cuz the tin foil hat is a jolt reskin
Le jolt
😆
@@Atlantic_dummie yep
Alpha Strike: Hold on, this whole operation was my idea
I purchased this blaster the other day, and it is brilliant. A few minor jams, but other than that it works well. I deal with the magazine by pushing the top of the release button with my index finger. Mildly annoying, but with practice it is a masterpiece of a blaster
"You can use something else" - casually whips around the 50rounds titan drum
I would purchase this blaster, the only problem is the magazine, magazine release and the jam door, so I find it very sad that nerf are making their products go backwards instead of forwards in terms of how it was built.
And those are just some problems... go with an after market/3rd party or thrift a rapidstrike (hyperfire if the form fits)
Bruh off brand blaster companies are beating nerf in their own game
@@st4ndg4mes87 Yep.
I just purchased the Phoenix and it isn't too bad. The jam door isn't really used much and works just fine. The mag release does take a bit of getting used to though and still is bad after that. I'll probably be picking one of these up just for the rate of fire over the Rapidstrike.
@@dinostudios6579 or you can get a rapidstrike and spend 20 bucks modding it to be wayyyyyyy better
I’m surprised that he didn’t complain about the stock length
Same
What stock? There's no stock on it.
It's supposed to be an smg so it doesn't matter as much.
@@exactpeak5995 most modern SMGs have adjustable stocks that fit just about everyone, so that's no excuse
ExactPeak599 Smgs are literally pistol caliber carbines, if the stock didn’t matter it would be considered a pistol
Thank you Hasbro for helping me saving money. Not a single new blaster this year that I feel like buying.
I haven’t been here in three years. Boy have you changed man. This is blowing my mind
They did this to the access door because some moders like to keep them off. And i know that you can’t really mod them
I hope this is sarcasm
Okay thank god for that edit lol
i dont think replacing the screws with clips and glue makes it more appealing to modders
Dam yall really getting bored in those scp sites y'all looking at nerf guns
Troublesome Trios they gotta fight those keter monsters somehow.
@@user-un5xj1wl6p Access/jam doors aren't screwed on any blaster. They are actually clamped between the two halves of the shell not just push fit in like they are on this 2.0 rubbish.
Nerf is going to be topped by dart zone and adventure force if they don’t start actually trying
Lets be real here those 2 brands topped nerf already, it’s confirmed after the release of that Nexus Pro blaster
Nerf should be cancelled
Joseph Joestar hey it is nerf that got most of us into the foam flinging hobby,stop disrespecting it
It's like Intel vs AMD, Intel just fucked around until it was way too late
Addy Liew they lost our respect ever since they glued the 2 shells of elite 2.0 blasters together. Its like they’re trying to say, ‘Hey! Is your blaster broken? Well fck you, can’t repair it this time, buy another one from us!’
I just bought 6 nerf original 18 magz, and all of them tend to jam halfway.
The solution i found that help quite a bit is, just filled it until 16, not 18 darts.
Ye, I used too many new and harder darts which didn't budge from the mag, my regulator thought I shoved a brick in my blaster
The first gun I ever watched a coop review for, cuz I discovered this channel backs. Few years when my parents kinda sworn off buying nerf blasters, but they softened up on that
In. Summary:
A blaster with a lots of tactics. Full automatic, shoots relative hard. Without the most comfortable magazine release, actually the magazine release sucks. By the way, the magazine that’s included with the blaster sucks, it provokes a lots of jams.
A good blaster, but the rapid strike still winning.
Pd: si encuentran incoherencias con la gramática inglesa es porque soy un niño de 12 años que esta practicando su ingles.... eso :)
What 😂 doing today I hope you have a good day and I hope you have a great day and I will be there for you and your family a day and time that you can talk to me about it and I think I have a good time with you and your family a lot of things to do in the morning and I will be there at the same time I don't have to go to the doctor and I will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will be there at the same time I don't have to go to the doctor and he will
Merci
Spanish 2 came in clutch for translating this lol
Ahhh... ok
Coop772: "smaller, more compact"
Nerf Turbine: (Holding HUGE 50 round mag)
Me: hmmmmm 😂
Coop
Fantastic video. So nice to get all the important information about these blasters before we decide which ones to choose. Great work Thanks
I know I'm late to the party but I've had a Turbine for the better part of a year now and here's my two cents: It's absolutely fantastic. Lays down the firepower while allowing me to attach all my tacti-cool zip tie flashlights, foregrips and scopes. However, I have 2 complaints:
The barrel lug is tilted to the side so if I equip a barrel attachment the darts fly off to the left. Noticeable and annoying.
The mag release isn't the best. While mine is nowhere near as bad as Coop's is, I definitely recommend using your thumb to push on the TOP part of the mag release. The bottom part of the mag release require so much pressure and actually hurts.
Honestly, just about every blaster Hasbro releases anymore is just a slightly tweaked reskin of there other blasters
TL;DR: Jolt reskin (but explained more intellectually and not mentioning the jolt)
I mean, there are only so many blaster ideas available. They have to recycle old ideas sometimes because of the limits of what they're actually making.
I would like to see more Nerf Combos videos, Elite 2.0 seems like the perfect series to revive the Nerf Combos series with all the Tac rails and stuff. Even though the Blasters aren't as good as they can be, at least they look cool (minus the fact that there are very few of these Metallic Blue colored attachments)
I got this blaster for christmas and i've had it for about 5 months. I agree that the magazine release is trash but when you get used to it its not so terrible at all. I recommend it for like inside nerf wars and i have dominated me and my friends games with this blaster so yeah. Thats just my opinion.
I was always pretty casual with Nerf and never did any big mods (literally only springs), so I got one of these out of boredom today without worrying about it being hard to open.
The only thing that bothered me about it was the crappy mag release, so I just decided to cut it off. Seriously.
I literally just took a box cutter and sliced off the mag release tab most of the way off in the mag well. I left a little bit of it in to provide a little friction in case the mag wanted to fall out, it’s so short now that the mag just slides over it anyway. I can’t attest to the consistency between different blasters, but mine grips the mag so tight anyway that the mag lock and release are completely unnecessary.
The detector lock that locks the flywheels without a mag is firm enough to hold it in by itself, it clicks in and out anyway when a mag is pushed into or pulled out of the gun, so the lock and release are functionally redundant. The detector lock alone holds the mag tight until I yank on it. I can shake the blaster and it won’t fall out, and all it needs now is a firm tug to pull the mag out, I completely ignore the awful release now.
Imagine someone in HASBRO was assembling the Echo, thinking it would work, then clicking it together, then trying to shoot only to realise, it did not work
Yeah. It actually HURTS to reload the blaster and the mag sucks. Not to buy.
I took a dremel sanding wheel to mine ground a crescent shape into it pretty comfortable now
I think the turbine would be useful especially in CQB game types, as you said it’s lighter and smaller, making it quick to whip around corners, add in a 30 or 25 round drum magazine filled with waffle head darts, and bam battle effective blaster.
Once again, thank you for the side by sides. Best Nerf reviewer ever! Always enjoy your objective style.
Coop: “I will not be using the included magazine at all because it is too unreliable.”
Also Coop: Proceeds to use the included magazine
Only for the firing demo. What he means by that is that he wont be using it private .
Solution for the mag release issue: Get your finger out of the trigger guard, press the side of the mag release with the tip of your finger. They placed the pivot point strangely up, so you can't just push the whole thing inward to release the mag, you have to push farther up.
I bought this blaster today and im pretty satisfied with it. Didnt have any jams and malfunctions including the mag and the rate of fire is so very poggers. But holy damn im a smol kid and this is my first mag fed flywheel blaster so i didnt think abt the magazine release. I literally have to put down the blaster and use two hands to take out the mag
0:50 Look at franks face when the gun was shaking LOL😂
For elite 2.0 I feel like they just got the alpha strike guys on the design team
For sure
Nerf should die right now
They need to bring back the original Rival designers
0:50 this is the face of a man who enjoys Nerf a lil too much
P.S I can proudly say that this is the face that made me subscribe
Picked my rapidstrike after this thing released. I don’t regret anything.
If anyone wants to open a 2.0 blaster but is concerned about damaging it is suggest watching Captain Xavier's video where he tested several tools trying to open up these things you can use cellphone repair kits or car trim removal tools there both cheap on Amazon and work really well although when it comes to solvent welds he hasn't tried to open one with that yet.
I’m not first
I’m not last
But ween coop uploads
I click fast
Yas me tooo
Respect
Kinda overused comment but ok.
King Gomez - Gaming, Reviews, Aviation, And More! Yeah it kinda is
(y) S ame
0:50 look at Frank's face.😂😂😂😂
One of the first few time I saw the gun before it's review on Coop`s channel. I will remember this glory moment.
Coop was like " its the magazine release for me ❤
Woah 😳 I haven’t watched in so long he looks so different, I kinda like the longer hair tho
The gun looks really cool
Can Always count on Coop772 to guide you in the right direction. Thank You!
I just got one and I am really happy with it. It’s my first automatic nerf blaster
With this particular blaster I always reload by grabbing the magazine with my fingers on one hand and using my thumb on the same hand to push down the release. It’s a lot less painful and actually feel kind of cool even if it takes a lot longer.
That’s what I do as well, I don’t mind the new magazine release but it’s just how you release it because like most people they use their trigger finger which is painful and harder which is why they get mad but they can also use your technique because it’s pretty much the same as the old magazine release
same i always tactically move my thumb to release mag
I love how you get 2x the darts
Now you have extra
Now you have extra crap darts that should have been discontinued years ago
@@josefsieffen18 lol
Yeah that is one of the good parts of Elite 2.0
The reason for doubling the amount of darts is because kids will start thinking that they will get more darts and more color options for those
Thank you so much for this review. I was about to buy one of these at target or something but you convinced me to just save that extra 30 dollars for something more important. Thank you 🙏
0:50 Haha I paused here to do something else and came back to the most amazing look on Coops face.
For those wondering what the Turbine’s Rate of Fire is: it’s around 4 to 4.5 DPS (Darts Per Second) or 240-270 DPM (Darts per Minute)
So it’s initially in the middle between the Rapidstrike’s 3 DPS (180 FPM) and the Hyperfire’s 5 DPS (300 DPM).
I think they heard complained of the echos magazine release so they tried to fix it but it got to hard this time. LOL
glad to see my homie is doin good
Turbine blaster + Echo barrel + Tacticool x3 rail attachment from the Demolisher pack + a lot of attachments = *Holy, Tactics, Batman!*
When you said “clipped together” what did you mean by that? I haven’t used an elite 2.0 blaster yet, but if I were to get one and try to mod it, would it just be more difficult to open or downright impossible? Is it possible to use a hot knife to cut through the plastic clips and/or glue? Thanks!
Its solvent welded, meaning that you have to actually break it to open it up, potentially damaging it beyond repair. So if you ever have a problem with the internals, you aren't able to fix it, your only option is to buy a new one, which is exactly what they want you to do.
Literally impossible.
So there’s no seam? Just one whole piece of plastic that you’d have to cut through?
@@afklion7140 thats how solvent welding works, removes any seems
Well that’s unfortunate
I can see Mega Darts. Motostryke review coming right after that
Nice!
Finally a Nerf blaster I want to see. Same with the MA40
@@josefsieffen18 I personally don't have any good reasons to buy or pre-order the MA40. It costs 50-60€ and I don't play Halo anyway. Even it looks super cool as a bullpup style blaster
Guess what? Motostryke is garbage too
@@josefsieffen18 really ? The internals suck, but the blaster concept isn't that bad in my opinion
On the Elite 2.0 Turbine the magazine release you have to press near the top to get it to slide out easier its like a safety upgrade or something but it is a awesome blaster for the 20$ I paid. Good job coop keep up the good work
I bought one yesterday. I noticed the way you use your thumb to press the mag release. That feels like that's the way it's designed to be used. Not with the back of the trigger finger. It would help if the printed instructions showed it. As a matter of fact that button's not on the product illustration on the back of the package. So far no jams or malfunctions with the included 18 round magazine. I used an old Rapidstrike CS-18 Clear mag, a new CS-18 orange mag sold separately and those worked fine. The AccuStrike Stratohawk (orange Rapidstrike) 25 round drum didn't fit the Turbine. I didn't try to force it. The darts I tried included fresh Elite that came with this, Blue Elite, Zombiestrike, Accustrike, Adventure Force wafflehead.
Thanx for showing the firing rate differences between this the Rapidstrike XD and the other one. I was waiting for your shooting test on this. You never test fire outdoors and the others never shoot indoors. It's good that it's rapid. Has-bro did that correctly.
I still say this Elite 2.0 line is for kids who don't have the originals that most of these are based on and it doesn't matter if they last and definitely can't be modded. It's not for those who own the original iterations like the Rapidstrike and Stryfe et al. In which case marketing chose the wrong name 'Elite 2.0' it should be called something else like Elite NB for Newbie or KO for Kids Only or NM for Not Moddable or GT Glued Together or SW for Sovlent Glued or FU lol etc. Seriously I'll consult! If other buyers have the QC magazine issue you had they're going to have returns. I wonder how many Wardens have been returned.
Nerf should make double stack mags, if u know what i mean.
yes but it would costs more so they won't make it
They also only work with fresh darts. Accaptable for pros who buy new darts every war, bit not good for a toy for children.
Look at the worker dominator
I bought one (I'm sorry, I had to) and it performs really well. The mag does not have any problems and I do the mag release with the thumb of my firing hand, it works pretty smooth.
Hey coop I watched you for a long time when I was like 5 and I came back to say nothing has changed and it’s still the best channel
Thanks Coop. It's nice to have a balanced review that isn't based primarily around the "Reee! It's glued together and I can't mod it! Reee!" opinion.
Tbh this is a reskin of a reskin , ish
Of a retaliator except this is flywheeled powered
Ah yes, resin. Tree waste
Nah, looks nothing like a retaliator. Reshell means same internals not looks
It's just a giant *Jolt Reskin* to me
@Just a Normal channel No, just no. I can't even... this comment makes no sense for multiple reasons.
Surely it's a reshell of a firestrike except it's flywheel powered, mag fed and fully automatic. 🤔🤪
Yes resin
Right now, I'm drinking coffee, smoking a cigar, and watching Coop772.
It's going to be a good day.
Wait a coop viewer smokes
Yeah, Coop's happy when he said 3:16 firing demo
He is looking better and better every new video, I'm glad that he seems to be doing better and staying tacticool
Coop: “even though it’s clipped together..”
Me: But I can see screw holes!
If this is a joke nice,
But if this isn’t there’s clips that hold it together under
I own one there are screw holes not tempting to open it thought
Those screw holes are trying to make every Elite 2.0 blaster even more secure even if they put some glue and clips
Fun Fact: People who say “first” haven’t watched the entire video yet.
Correct
Correct, but neither have you lol 😂
agree
BeckettTheBucket he didn't say he watched it
I didn’t even try look at my comment
Hey coop thank you because of you I got my son the echo and the Phoenix it was perfect for him thank you so much
I'm not a fan of these magazine releases, but I also feel like over time it's something I can adapt to. Rather than using my knuckle I usually just reposition my hand to press the button with my thumb. It's an time consuming movement that costs time if you're feeling competitive but like any part of reloading you do it often enough to become second nature and the downsides of doing it negligible. Of course what would be great is if I didn't have to change my entire reload routine in the first place!
I have a question,why did metal barrel increase accuracy but the plastic barrel doesn't
It's not necessarily the barrel material, I think it's the seal with the plunger tube that metal barrels create. It has a similar effect to how rifle barrels work in that it makes the blaster more air efficient, therefore increasing velocity and by proxy increasing accuracy.
@@stuffandthings8999 Physics at work
Songs With Added Pew Pew, it’s because metal has magic properties
Do a 430 dart challenge with this blaster
was looking for this comment 😂
I doubt he will because of the reloads 😂
Coop always flexing his kitchen/hallway that's bigger than my whole house.
Coop, you should start doing all of your firing demos with the Titan fifty round drum. It will take away the need to reload, and it will just make it a lot easier.
Did any body realized that acustrike is replaced with ultra and modules is replaced by elite 2.0 but just reskins of old blasters
They might've discontinued accustrike to make ultra look good......?
Maybe
Nah, elite 2.0 is everything and that's sad ultra is kind of the new best and only option in marketing
But what I mean is modules is dis continued because of 2.0 and they are not that different you know what I'm saying
Elite 2.0, alpha strike and ultra are the only lines still being continued and they are all garbage
@@nitroflux_o1040 you are right
The turbine shoots much faster than the rapidstrike, maybe even faster than the hyperfire
Looking great Coop!
Without the table and coop standing it looks so much more different and looks more clean in my opinion
I buy this to my friend and he like:”is that hard to get a rabidstrike?”
I buy this for my brother and he's like "why do you hate me?"
Oh my god, Elite darts just bounce around, Waffle darts are just lasers
And rival is pretty dang accurate but drops off after 30 feet
I've had the same exact feeding issue with the clear 18round stick mag that came with my Rapidstrike!
Coop is way nicer than he used to be!! Way to go I Love the new coop
This blaster is a new rapidstrike but they removed the carry handle and made the barrel shorter
Also no screws
The "new" Rapidstrike
Nerf will never beat the rapidstrike, especially not with this garbage
@@narenthebeesechurgerman422 100%✔✔
@@narenthebeesechurgerman422 you guys are overreacting this very well would have been better if the mag release wasnt bad
It has a faster rate of fire, it's more compact, and if you say "the hyper fire also is faster" the hyperfire didn't even hit the wall in the firing demo
Coop even said that if not for the mag release, this would have been better
TheDolphinBoss I’m a modder, if it had screws I would’ve loved this thing
@@ethanzhang5198 the mag release isn't the only issue, although it is a glaring one. The blaster is glued shut, just like all the other Elite 2.0 blasters, so even if you want to fix the mag release problem, you can't. If the blaster ever breaks, or if you want to mod it, you can't without seriously damaging the shell. Your only choice upon the blaster breaking is buying a new one, which is exactly what they want you to do. Its unforgivable, and a huge step backwards for Nerf
This is honestly the best stock elite ammo blaster out there with the fastest firing rate of all, if the the mag release was quick fixed. With a fixed release, it is a cool blaster. Oh yeah, this is considering I completely forgot the clip and glue problem.
AK paddle style mag releases are the best because you can use the hand that's removing the mag to push the paddle.
Not gonna say first
You monster
This is still annoying. Either comment about the video or go
What about all the people who say first?
He actually is first
@@clips1_6 so?
Nerf is getting destroyed by adventure force, and I love it.
I bought the blaster, and I got used to removing the magazine so my fingers don’t hurt. A problem I found is mine jammed a lot! Pretty good blaster if you ignore the jamming.
bro this accually looks good! elite 2.0 might be getting good, with the flip 32!