Would you say that this phone has good water protection (for example comparing to mi 11T)? I know that it has no IP certificate, but I've seen multiple water tests and it always worked perfectly after.
Phones gets impermeability because they are closed with a sticker. Probably it won't be 30 min in 1 meter of water but since the glass should be still Gorilla Glass (aka plastic), it should at least resist rain drops. But these are just assumptions.
Hi! Great Video.. one month ago my gt neo 2 back case just broke and after looking in the market I noticed that there were only non official replacements. I wanted to ask you if you think replacing it for a non original one would be a mistake. I was afraid because as I saw in the video the case includes circular glases in the camera place and I was worried about that component affecting in my future photos.. Thanks for your time!
Thankyou so much. My son dropped my phone into a bucket of water and I had water and condensation stuck under the front and back lenses. This tutorial helped me fix it.🙏
I guess you are mixing up the primary camera and the ultrawide camera. The bigger camera on the top is definitely the primary camera. You can also distinguish the ultrawide camera with its first lens element (a characteristic large convex element) (without tearing down a phone). It’s not the first time you mix up some cameras.
Yes you are correct, I realized I said the wrong one afterward but RUclips doesn't have an option to add a new clip etc. So I might just cut that portion out I will see. Usually I go based off the user manual and manufacture specs diagram.
Hi, great video. I have a question did you have to glue the back plate or it clicks in? If glue do you recommend any specific one for it? Previously i was workin in repairing xiaomi phones and they had specjal sticky for back glass bit i canno find anything like it for realme
Thanks. Yeah you need to apply new adhesive. You can purchase it from this site or similar sites: www.aliexpress.us/item/3256804701724336.html?gatewayAdapt=glo2usa4itemAdapt you can also watch this video which goes more in depth about the adhesive: ruclips.net/video/T4iiPUIM7-Y/видео.html
@@PBKreviews thanks for replay, well performance and build quality this realme gt neo 2 better than xiaomi 11t pro? but xiaomi 11t pro have gorilla glass victus on front display, and how about result from their camera?
@@PBKreviews Great video as always ! I want to ask your opinion, from all of the phones that you already disassembled , which one that has the best cooling system (large VC, etc) , thanks !
@@hafidsg thanks! Largest vapor chamber I can think of would probably be this phone (realme gt neo 2) and the oppo reno 7 pro has a pretty large vapor chamber as well.
I play efootball2021 and this mobile heats up. Is it normal as they claim it has the largest vapor chamber cooling. My honor 8x used to be a lot cooler while playing the same game.
Keep in mind, just because the phone is heating up, does not mean its over heating. It can mean that the heat transfer is more efficient in getting the heat from inside the phone to outside the phone. If the phone is overheating you will see frame drops, lag or freezing etc. That's why some high end gaming phones have those outside fans to cool off the outside of the phone :)
@PBKreviews I chose to get gt neo 2 instead of black shark 🦈 4 😞 Is the gt neo 2 far off in the heat dissipation department? Can an external cooler fix that?
It's not far off but not close either. You should be fine with the gt neo 2 its not a bad phone. Not sure about external fan and how much it would benefit.
After how much time should i open it and replace the thermal paste? I've heard it's a "diamond" type, i wonder if ARTIC mx-4 can do the trick the same way?
@@sierrachief117 I'm asking because of that, dude. I don't need to remind you that the paste is there for a reason and it absolutely will a problem when it will dry out.
Do you have any idea where to buy cheap middle frame? The glass back is cheaper here but I can't find cheap middle frame. Is it possible to replace it with aluminum frame?
Sir, please reply dena gaming live stream ke liye kya mobile Le sakte hain jo aap Bata rahe ho...........realme gt neo 2........12gb or 256, wala Lene Wale Hain please reply gaming live stream ke liye lena hai............
hi, I mistakenly pushed the sim ejector tool to mic hole in same phone(Realme GT Neo 2). Could you please let me know, is this going to damage mic on this phone..you have opened all parts of this phone..could you please let me know the thing..I m little worried for this,bcz I just newly bought this..thanks in advance
Hi, you wouldn't damage the mic since its seated above the hole but the filter is seated against the hole so you might have poked the filter. I don't think it should affect the water resistance since but can't be sure.
Sir, There's a problem, I bought this phone (realme gt neo 2) and I accidentally put the sim ejector tool in primary microphone port and pushed it, some popping sound is heard. I'm afraid if I damaged something. My mic is working because recordings show normal voice. But I'm afraid if I broke something in my new phone...😥😥 Plz help sir 😥
Hi even I did the same mistake of putting sim ejector pin i mic and it felt like pressing a rubber button... It is confusing .... Hi Prince how's your mobile now any issues after you did it?? Any chance of water damage in future
Please disassemble the vibration motor in the coming times and talk about its type, quality and method of work Because it is also an important element As well as talking about the quality of raw materials and the extent of proficiency in the installation and locking of the device Regards and thanks
have you tried replacing the charging flex cable some sellers says that i could potentially lose my fast charging function if i replaced it with their products my only problem is that my phone charging port is getting lose
Hi, I don't think it would work. The battery would be too large to fit in the compartment as well as the connector location would probably not be exactly the same.
It should be very similar to the oneplus 10r teardown I did, since its basically a re-branded oneplus 10r except for the location of the back flash from the looks of it.
So if the battery is replaced, it gets disabled? Is it a fact or just assumption and also can you point me to an article which references it? Curious to know. Thanks
I think is LPDDR5. The device is really freaking Fast!!! The games and applications flies. I bought the Green goblin. Is a Good device and the Ecosystem is Really quick... Bigger manufacturers have to get a Close up of this Company.
@@p4ulth0m4s6 I got this email from realme: Dear Customer, Thank you for writing to realme customer service, we will assist you with the best solution. We apologize for the inconvenience caused to you. We value the importance of your time and concern. In response to your concern, we would like to inform you the following details: RAM technology : LPDDR4x RAM channel :Quad channel RAM frequency : 2133Mhz
@@gbiv_4120 well depends on which google pixel you are talking about, the 6 and 6 pro are both all aluminum uni body. But what I mean about the gt neo 2 is that the mid frame is aluminum alloy but the border/sides are plastic, you can see where the aluminum ends on the teardown and where the black plastic border begins.
I really like your videos, straight forward and informative. It would be great if you could give your opinion on the phone's structural build quality, like the mid metal plate material and overall longevity of the phone. Thanks!
Thanks! I usually give a repairability score towards the end of the disassembly before I re-assemble it and mention my thoughts on the overall process. However I will try in the future to mention any build quality issues I notice, but usually these phones for the most part are all built very much alike with either a uni body aluminum frame, or an aluminium alloy frame with a plastic border and are built strong enough to endure most things. So there isn't too much of a difference between most of the models on that perspective to dive to deep into that. It's been a while since I have worked on a phone which had a frame that wasn't durable and would bend or snap. :)
@@PBKreviewsI hate this Dual battery concept especially these 2*2500 mAh battery. I could be wrong but it will likely take a toll as it would start to deplete and will deplete twice than a single 5000 mAh battery. I've seen iPhones batteries which uses 2 batteries in this L shape and they're not that durable
Do you have a screen lock? also check display settings to see if you can disable auto screen wake so the screen doesn't turn on by itself unless you click on the power button.
Can't believe how you do that but somebody who just own the phone and came to house if that person see you doing this to his phone that reaction will be awful lol
@@PBKreviews Can you check what camera model have some say Samsung for India, some claim IMX682 in Eu so we don't know for sure.. Sony seems to be way better from Samsung sensor.. And one more thing what you think about screen white balance is possible to tweek it soild to not be bluish or yellow tinted? 😅
@@stefanranelovic5228 Hi, not sure of the make/model of the camera. The only writing on the flex I was able to see was: C1MA42 Q TECH-O B13114 75 Also I don't really think there would be any user end way of tweaking the tint on the screen itself. Usually would require either the software itself to be changed by the manufacturer or would be a hardware level thing like the actual type of leds or lighting being used on the backlight of the screen or the actual material and quality of the screen being the issue.
I have played genshin impact in this phone at 30fps phone temparature was 40degress celcius in summer time it goes upto 45 at 60 fps in rainy season it goes direct 45 my hands can feel the heat how to reduce the heat bro
@@PBKreviews can you pls check and confirm , because I think neo 3t neo 2 or gt 2 back panel should be shame because the back is same so back panel also should be same
The cost can be different depending on where you find a screen or repair shop. It's not a set in stone price that is the same everywhere. There is this link for one online which is about $71 USD www.maxbhi.com/lcd-with-touch-screen-for-realme-gt-neo-2-green-display-glass-combo-folder.html
No sabía que tenía batería dual Eso no es bueno porque afecta a la autonomía. Es como si tuvieras solo 4500 mAh y no 5000 mAh cuando tiene baterías duales.
Look at my older video's you can see me in some. One of them is this dxracer chair video I did a while back: ruclips.net/video/VLDEBXZ7dm0/видео.html another is a chucky doll review I did, you can search it up on my channel. I will try to be more active on Instagram.
@@ณัฐพลสัมพโว-ผ3ฌ I would do it if it hadn't been done or there was big interest from people in it, but the cost of getting the phone compared to how many views the video would get would not be worth it. Since its already been done, not many people would view the video again and it would be a big loss in cost of the phone. I will look and if I find one for a decent price, i will do it for you.
just get an iphone,the repairability of an iphone it's 10/10,i hate phone that are assembled using adhesive when you repair them it wont be the same,there will be gaps in the back glass,
You know that iPhones also have adhesive under the screen holding it down right? Not to mention so many different sized screws. iPhone repairs depending on what needs to be changed can be more difficult than most other phones. I promise you its not 10/10. Also if you replace the adhesive with the precut replacement adhesive made for the phones when you repair the phones, there will be no gaps or no issues with water resistance if the phones have it. Just for an example, here is a link to a different phones back glass adhesive replacement. You peel off the old adhesive, and peel off the cover on the new one and apply it to the frame of the phone and re apply your back plate. Its simple. www.mobiledefenders.com/motorola-repair-parts/g-series/g-power-xt2041/adhesive-back-glass-for-moto-g-power-xt2041-authorized-oem.html :)
@@PBKreviews ohh good to know,but sometimes it's hard to find a precut adhesive here in my country, while iphone has it all,btw it's just my opinion but i still love phone's that requires adhesive to hold down the back glass,just a bummer sometimes i get my phones repaired but it comes back with gaps where dust can get in easily,i think it's just the phone repair shop not doing a good job putting back the back glass
Been waiting for this, great work..
Thanks!
man i replaced the entire front housing with the screen thanks to this video !!!!!!! you are amazing!! big up
i broke 2 perimetral flex antennas while removing the back plate.. is that a big deal or i shouldn't mind it ?
Can k replace battery without opening anything else then back glass plate and plastic plate over the battery?
can i replace the back housing with metal?
Would you say that this phone has good water protection (for example comparing to mi 11T)? I know that it has no IP certificate, but I've seen multiple water tests and it always worked perfectly after.
Khai sim có gioong cao su nên có chống nước như Redmi note 7 nha
Phones gets impermeability because they are closed with a sticker. Probably it won't be 30 min in 1 meter of water but since the glass should be still Gorilla Glass (aka plastic), it should at least resist rain drops. But these are just assumptions.
Got my gt neo 2 completely submerged in a tub for a couple of seconds. Nothing happened at all
Hi! Great Video.. one month ago my gt neo 2 back case just broke and after looking in the market I noticed that there were only non official replacements. I wanted to ask you if you think replacing it for a non original one would be a mistake. I was afraid because as I saw in the video the case includes circular glases in the camera place and I was worried about that component affecting in my future photos.. Thanks for your time!
Thankyou so much. My son dropped my phone into a bucket of water and I had water and condensation stuck under the front and back lenses. This tutorial helped me fix it.🙏
You're welcome!
I guess you are mixing up the primary camera and the ultrawide camera. The bigger camera on the top is definitely the primary camera.
You can also distinguish the ultrawide camera with its first lens element (a characteristic large convex element) (without tearing down a phone).
It’s not the first time you mix up some cameras.
Yes you are correct, I realized I said the wrong one afterward but RUclips doesn't have an option to add a new clip etc. So I might just cut that portion out I will see. Usually I go based off the user manual and manufacture specs diagram.
Amazing! Thank you for your time putting out such great video. Any chance of having the Realme GT 5g disassembled?
Hi, great video.
I have a question did you have to glue the back plate or it clicks in? If glue do you recommend any specific one for it? Previously i was workin in repairing xiaomi phones and they had specjal sticky for back glass bit i canno find anything like it for realme
Thanks. Yeah you need to apply new adhesive. You can purchase it from this site or similar sites: www.aliexpress.us/item/3256804701724336.html?gatewayAdapt=glo2usa4itemAdapt you can also watch this video which goes more in depth about the adhesive: ruclips.net/video/T4iiPUIM7-Y/видео.html
Great video, daammmn full plastics
How about build quality than xiaomi 11t pro?
Thanks! I think its very similar to 11t pro, same type of frame etc. But the vapor chamber on this one is larger.
@@PBKreviews thanks for replay, well performance and build quality this realme gt neo 2 better than xiaomi 11t pro? but xiaomi 11t pro have gorilla glass victus on front display, and how about result from their camera?
@@PBKreviews Great video as always !
I want to ask your opinion, from all of the phones that you already disassembled , which one that has the best cooling system (large VC, etc) , thanks !
@@hafidsg thanks! Largest vapor chamber I can think of would probably be this phone (realme gt neo 2) and the oppo reno 7 pro has a pretty large vapor chamber as well.
@@PBKreviews thanks for the answer !
Would love to see you disassembling the new Xiaomi 12 Pro that claimed to have very good cooling system
Hello, do you have any back housing cover for realme gt neo 2?
Great content, keep it up!
Thanks! 😀
Does the neo 2 and and the neo 2T have.the same battery board pins？cause I'm planning to insert a battery.of.the neo 2 in the neo 2T, is it possible?
keep up the great work! ,👍
Thanks! 👍😀
Hi,can i know realme GT neo 3 (80w 5000mah) use the same battery?i cant find it..only have 4500mah 150w version..with 2 ribbon
I play efootball2021 and this mobile heats up. Is it normal as they claim it has the largest vapor chamber cooling. My honor 8x used to be a lot cooler while playing the same game.
Keep in mind, just because the phone is heating up, does not mean its over heating. It can mean that the heat transfer is more efficient in getting the heat from inside the phone to outside the phone. If the phone is overheating you will see frame drops, lag or freezing etc. That's why some high end gaming phones have those outside fans to cool off the outside of the phone :)
The heat from CPU and mother board sends to outside so you fee heat it is no issue but if the phone lags when heat the return
Question i only need to replace the front glass screen and replace with a new digitizer one should i follow all this steps?
I have the same question! Just dropped. my phone on the ground and the screen is unusable now
is xiaomi 11t pro got same frame like that sir?
Hi, yes. :)
I don't know why I have a serious anxiety while watching this type of videos😬
lol yea it can get hectic at times.
hello bro i have a question can i place this means reqlme neo gt 2 5000 mah battery to realme x2 pro 4000 mah please reply bro
@PBKreviews I chose to get gt neo 2 instead of black shark 🦈 4 😞
Is the gt neo 2 far off in the heat dissipation department? Can an external cooler fix that?
It's not far off but not close either. You should be fine with the gt neo 2 its not a bad phone. Not sure about external fan and how much it would benefit.
Thanks a lot for this video 🙏
You're welcome :)
Waiting for this video
👍
Does it have a glass back in black colour?
Is glass on plastic in back?
After how much time should i open it and replace the thermal paste? I've heard it's a "diamond" type, i wonder if ARTIC mx-4 can do the trick the same way?
Dude, thermal paste on a smartphone chip does need to be replaced, as the cpu operates at much cooler temperatures than laptop or desktop cpus
@@sierrachief117 I'm asking because of that, dude. I don't need to remind you that the paste is there for a reason and it absolutely will a problem when it will dry out.
Do you have any idea where to buy cheap middle frame? The glass back is cheaper here but I can't find cheap middle frame. Is it possible to replace it with aluminum frame?
Not sure
Sir, please reply dena gaming live stream ke liye kya mobile Le sakte hain jo aap Bata rahe ho...........realme gt neo 2........12gb or 256, wala Lene Wale Hain please reply gaming live stream ke liye lena hai............
Hi, I have no idea what you are asking.
*back glass or plastic? how to know?*
Hi, its glass. Once its removed you can tell between the feel and the no flex that its glass and not plastic.
Thanks for the video!
hi! where is the GPS chip? Thanks!
Specs wise displays of gt2 and gt neo 2 are same, replacement displays will be also same? Pls tell
I'm not 100% sure but possibly the same display.
@@PBKreviews thank you
hi, I mistakenly pushed the sim ejector tool to mic hole in same phone(Realme GT Neo 2). Could you please let me know, is this going to damage mic on this phone..you have opened all parts of this phone..could you please let me know the thing..I m little worried for this,bcz I just newly bought this..thanks in advance
Hi, you wouldn't damage the mic since its seated above the hole but the filter is seated against the hole so you might have poked the filter. I don't think it should affect the water resistance since but can't be sure.
I want to see inside realme Q5 pro, how is it defferen between Q5 pro and gt neo 2. You may do it. Thank you.
Sir, There's a problem, I bought this phone (realme gt neo 2) and
I accidentally put the sim ejector tool in primary microphone port and pushed it, some popping sound is heard. I'm afraid if I damaged something. My mic is working because recordings show normal voice. But I'm afraid if I broke something in my new phone...😥😥
Plz help sir 😥
Hi you should be fine. The mic is seated above the hole so it wont be damaged.
@@PBKreviews thank you sir 😊😊😊
Hi even I did the same mistake of putting sim ejector pin i mic and it felt like pressing a rubber button... It is confusing .... Hi Prince how's your mobile now any issues after you did it?? Any chance of water damage in future
@@nishmithrai7640 no there's no problem in mic I think... But water proof has been damaged 😪
@@Prince-od4cn thanks !!! Can you see a mesh like in speaker in the mic hole .... Was it there when it was new
Please disassemble the vibration motor in the coming times and talk about its type, quality and method of work Because it is also an important element As well as talking about the quality of raw materials and the extent of proficiency in the installation and locking of the device Regards and thanks
Nyc brother 🤗
Thank you :)
It is Graphene?
Thanks ,I go for this
Vapour Cooling Chamber Stainless steel
have you tried replacing the charging flex cable some sellers says that i could potentially lose my fast charging function if i replaced it with their products my only problem is that my phone charging port is getting lose
If its an aftermarket flex cable its possible that can happen. I haven't personally changed it with an aftermarket to say for sure.
Brother please help me does can u check gt Neo 2 5000mah can be used in realme x2pro 4000mah .o hope you will reply waiting
Hi, I don't think it would work. The battery would be too large to fit in the compartment as well as the connector location would probably not be exactly the same.
Would the repair for the GT Neo 3 be similar?
It should be very similar to the oneplus 10r teardown I did, since its basically a re-branded oneplus 10r except for the location of the back flash from the looks of it.
do repairs disable the fingerprint reader ?
battery disable
Not 100% sure but I would think not. I haven't herd anything about it getting disabled.
So if the battery is replaced, it gets disabled? Is it a fact or just assumption and also can you point me to an article which references it? Curious to know. Thanks
Thanks for sharing. Is the RAM Lpdd4x or Lpddr5?
I think is LPDDR5. The device is really freaking Fast!!! The games and applications flies. I bought the Green goblin. Is a Good device and the Ecosystem is Really quick... Bigger manufacturers have to get a Close up of this Company.
@@p4ulth0m4s6 it's really a fast device, but the device info hw app stated that the ram type is lpddr4x!
@@aymenalawadi7858 really? I'm gonna see that Bro
@@p4ulth0m4s6 I got this email from realme:
Dear Customer,
Thank you for writing to realme customer service, we will assist you with the best solution. We apologize for the inconvenience caused to you. We value the importance of your time and concern.
In response to your concern, we would like to inform you the following details:
RAM technology : LPDDR4x
RAM channel :Quad channel
RAM frequency : 2133Mhz
@@aymenalawadi7858 I think some models have the LPDDR5, tho. Probably in different regions.
Are the frame alumunium or plastic?
It's an aluminum alloy midframe with a plastic border.
@@PBKreviews so its like google pixel? The frame is aluminum with a plastic coating?
@@gbiv_4120 well depends on which google pixel you are talking about, the 6 and 6 pro are both all aluminum uni body. But what I mean about the gt neo 2 is that the mid frame is aluminum alloy but the border/sides are plastic, you can see where the aluminum ends on the teardown and where the black plastic border begins.
@@PBKreviews ok thx dude
@@gbiv_4120 you're welcome
Q tan buena consideras q es su construccion?
It's good, pretty solid device.
I really like your videos, straight forward and informative. It would be great if you could give your opinion on the phone's structural build quality, like the mid metal plate material and overall longevity of the phone.
Thanks!
Thanks! I usually give a repairability score towards the end of the disassembly before I re-assemble it and mention my thoughts on the overall process. However I will try in the future to mention any build quality issues I notice, but usually these phones for the most part are all built very much alike with either a uni body aluminum frame, or an aluminium alloy frame with a plastic border and are built strong enough to endure most things. So there isn't too much of a difference between most of the models on that perspective to dive to deep into that. It's been a while since I have worked on a phone which had a frame that wasn't durable and would bend or snap. :)
@@PBKreviewsI hate this Dual battery concept especially these 2*2500 mAh battery. I could be wrong but it will likely take a toll as it would start to deplete and will deplete twice than a single 5000 mAh battery. I've seen iPhones batteries which uses 2 batteries in this L shape and they're not that durable
Watching on Realme gt neo 2 🤠
👍
Don't try this at home. LOL.
@@UslutBhai lol :)
How to order for lcd gt neo2
Great Video Buddy. Is this device available in US?
Thanks. No it's not sold for the US market so would need to be ordered from ebay or elsewhere.
@@PBKreviews Okay. Thanks for replying I was just wondering how you got the device in US that's why asked. 😊
Is there any wifi module on the phone?
yeah
the outer body material is plastic or aluminum?
The border of the phone is plastic, back is glass and mid frame is aluminum.
@@PBKreviews thanks,
greetings to meet me from Indonesia😁😁
@@shihaoo 😀👍
Can anyone please tell me what is that secondary flashlight look like thing is there in neo 2 . What it will do?
I think its for the macro camera, turns on when taking pics with that camera if I am not mistaken.
Its a sensor.
@@LiegeMaximo ya bro but which sensor and what I'll do?
@@avinashhk6937 i think this phone has some object sound related capture or such stuff. Not so sure, but it has high chances to be related to that.
Which cooling system is better between black shark 4 and realme gt neo 2?
Black shark 4
@@PBKreviews Thanks for the response 👍🏽
Is the gt neo 2 far off in the heat dissipation department? Can an external cooler fix that?
@@PBKreviews whats the difference between these two cooling in the devices,can you explain?
is it have 11 antenna as advertised?
Not sure exactly how many it has but I highly doubt there would be any less than advertised.
Good Video
Thanks!
@@PBKreviews can we get a Teardown of iQOO 7 Snapdragon 870 variant
@@akshay6365 will look into it
Hii sir I'm facing DND mode on automatically when kept in pocket while riding bike
Do you have a screen lock? also check display settings to see if you can disable auto screen wake so the screen doesn't turn on by itself unless you click on the power button.
Please the realme gt neo 2 back from glass or plastic
Its glass
@@PBKreviews thunk you i was think its plastic not glass and many videos speak about it and say plastic not glass
Chất lượng phần cứng và tản nhiệt so với K40 gaming thì tốt hơn hay kém hơn vậy ad?
I feel there are similar, but the GT neo 2 might be slightly better.
Nice stuff
Thank you :)
Wery good
👍👍👍👍👍🙂🙂🙂🙂🙂
🌟🌟🌟🌟🌟
Thanks!
Can't believe how you do that but somebody who just own the phone and came to house if that person see you doing this to his phone that reaction will be awful lol
Lol
Glass back or plastic back
Thanks
Glass, you're welcome.
Really? My Next phone I hope
Dual stereo speakers?
yes
Vibration motor is good quality?😁
yea its not bad, better than most phones out there but not the best either.
@@PBKreviews Can you check what camera model have some say Samsung for India, some claim IMX682 in Eu so we don't know for sure.. Sony seems to be way better from Samsung sensor.. And one more thing what you think about screen white balance is possible to tweek it soild to not be bluish or yellow tinted? 😅
@@stefanranelovic5228 Hi, not sure of the make/model of the camera. The only writing on the flex I was able to see was: C1MA42
Q TECH-O
B13114 75
Also I don't really think there would be any user end way of tweaking the tint on the screen itself. Usually would require either the software itself to be changed by the manufacturer or would be a hardware level thing like the actual type of leds or lighting being used on the backlight of the screen or the actual material and quality of the screen being the issue.
I have played genshin impact in this phone at 30fps phone temparature was 40degress celcius in summer time it goes upto 45 at 60 fps in rainy season it goes direct 45 my hands can feel the heat how to reduce the heat bro
thanks
Back panel is plastic?
no its glass
@@PBKreviews It's felixble?
no vibrattion motor?
Yes you can see it @5:48 in the video.
which main camera sensor?
The 64MP Primary is on the bottom.
@@PBKreviews Sony or Samsung?
@@АлександрЗ-л3ц Samsung sensor, same sensor like on Redmi Note 9 Pro
Does this phone has dual 5g
Do you mean dual sim?
@@PBKreviews duaĺ sim 5g
@@sahilksangma490 no I beleive only one sim slot has 5g support.
ty
:) you're welcome
Nice
Thanks!
I chose to get gt neo 2 instead of black shark 🦈 4 😞
Is the gt neo 2 far off in the heat dissipation department? Can an external cooler fix that?
Where is NFC antenne?
I have the same question
Can we add neo 2 back panel into gt 2
Yes, I believe so.
@@PBKreviews can you pls check and confirm , because I think neo 3t neo 2 or gt 2 back panel should be shame because the back is same so back panel also should be same
Next Google Pixel 6/6 pro?
Just uploaded the 6. Will try to do the 6 pro when I get it in.
Cool
👍
Gracias
You're welcome
Can you please tell about screen replacement cost please please please sir
The cost can be different depending on where you find a screen or repair shop. It's not a set in stone price that is the same everywhere. There is this link for one online which is about $71 USD www.maxbhi.com/lcd-with-touch-screen-for-realme-gt-neo-2-green-display-glass-combo-folder.html
@@PBKreviews LCD? Isn't the GT Neo 2 amoled E4?
oh sorry dear you are busy i made a note 1 year to reply
สุดยอดครับ
Thanks!
Do IQOO 7 normal edition tear down please 🥲
Hi, there are a few videos on the IQOO 7 on RUclips already.
@@PBKreviews that is legend bro
@@subhashreddy739 oh ok, i will look into it.
@@PBKreviews tqq 🥲
@@subhashreddy739 👍
Next Sony Xperia Pro I
will look into it
สุดยอด
Thanks!
Make a video on realme 8i
ok I will look into ordering it.
No sabía que tenía batería dual
Eso no es bueno porque afecta a la autonomía.
Es como si tuvieras solo 4500 mAh y no 5000 mAh cuando tiene baterías duales.
What is your country live
USA
Live your life, country
India
When we c your face?
Plz revile your face
Look at my older video's you can see me in some. One of them is this dxracer chair video I did a while back: ruclips.net/video/VLDEBXZ7dm0/видео.html another is a chucky doll review I did, you can search it up on my channel. I will try to be more active on Instagram.
@@PBKreviews thnxs
You're welcome :)
Please give me its display . My mobile display is broken and here in nepal i should have to pay more than 20000
I don't keep the phones, I sell them after the videos.
Let me see the inside of realme x7pro 5g.
Hi, it's already been done by someone else on RUclips.
@@PBKreviews I want you to do it because I'm your fc.
@@ณัฐพลสัมพโว-ผ3ฌ I would do it if it hadn't been done or there was big interest from people in it, but the cost of getting the phone compared to how many views the video would get would not be worth it. Since its already been done, not many people would view the video again and it would be a big loss in cost of the phone. I will look and if I find one for a decent price, i will do it for you.
@@PBKreviews ok
Dziękuję, przyda mi się bo zamierzam wymienić w nim tylną obudowę. Już zamówiłem z aliexpress. Za 30 dni ma być w Polsce
You're welcome
Realme 8i
just get an iphone,the repairability of an iphone it's 10/10,i hate phone that are assembled using adhesive when you repair them it wont be the same,there will be gaps in the back glass,
You know that iPhones also have adhesive under the screen holding it down right? Not to mention so many different sized screws. iPhone repairs depending on what needs to be changed can be more difficult than most other phones. I promise you its not 10/10. Also if you replace the adhesive with the precut replacement adhesive made for the phones when you repair the phones, there will be no gaps or no issues with water resistance if the phones have it. Just for an example, here is a link to a different phones back glass adhesive replacement. You peel off the old adhesive, and peel off the cover on the new one and apply it to the frame of the phone and re apply your back plate. Its simple. www.mobiledefenders.com/motorola-repair-parts/g-series/g-power-xt2041/adhesive-back-glass-for-moto-g-power-xt2041-authorized-oem.html :)
@@PBKreviews ohh good to know,but sometimes it's hard to find a precut adhesive here in my country, while iphone has it all,btw it's just my opinion but i still love phone's that requires adhesive to hold down the back glass,just a bummer sometimes i get my phones repaired but it comes back with gaps where dust can get in easily,i think it's just the phone repair shop not doing a good job putting back the back glass
it's just more easier to find iphone spare parts than these type of phones in my country😥
@@munchgaming4589 true, as far as parts availability goes, iphone parts are more widely available. 😀
Please infinix zero neo
Hi, that phone has already been taken apart by a few people on RUclips.
Ok
@@ivanfajrin3982 👍😀
Nice
Thanks!
Nice
👍