2009 ford ranger front wheel bearing replacement
HTML-код
- Опубликовано: 12 сен 2024
- #automotive #ford #ranger #4x4
had some complications after fitting the wheel bearing with aftermarket parts that are meant to be OEM matching but simply ain't.... the scraper seal (aftermarket) was slightly larger so when I torqued the driveshaft nut the bearing would not turn scratched my head for a while and even made many phonecalls to different parts suppliers it was the only one listed... wasted an hour that I haven't got messing about with inferior parts... anyway after fitting the old scraper seal it was perfect... vehicle is now driving smooth 🤙🤙🤙🤙
![Eminem - Fuel (Shady Edition) feat. Westside Boogie & GRIP [Official Audio]](http://i.ytimg.com/vi/k1OquBida9s/mqdefault.jpg)
Love the new camera giving you the ability to use both hands…..
Ye cheers it's a bit different but allows me to show stuff actually being done
Just did my wheel bearings on my 2010 Mazda BT-50 UN, same as a PJ/PK Ranger here in Australia. I had to belt the hub about 15 times with a 32mm socket on the back with sledge hammer before it finally started to come out of the steering knuckle! Great video though mate, helped give me the confidence to attempt this job myself. I did take the knuckles to a suspension shop to have the bearing pressed out and the bearing inner races removed from the hubs though.
Hi Baz
Are these bearings sealed? A local garage recommended re-packing the existing bearing with grease, but looks like that bearing is a single sealed unit?
Cheers
Dave
Just the job. Thanks for sharing
Hi, i have the same problem that after fitting the seal and tightening the hub nut the bearing will not spin. How did you sort this? Fitting a new seal? Thank you
Any tips with getting lower ball joint to let go? Mine is seized
Thanks for video, I have a problem that drive flange wouldn go out, Im smashing it with big hammer, I try sledgehammer too and nothing happend. any advice? thx
did you get it out mate?
@@AngryYouAre yeh, in Czech rep. We have a saying “when power doesn’t help, more power will” :D it needs few more pounches
@@antoninsvoboda1809 Same here, it took me about 15 whacks with a 32mm socket on the back of the hub for it to finally start moving! That was in there bloody tight. Mazdas BT50 UN 4x4, here in Australia
Customer says "How Much!, just to do a wheel bearing". Then you see what's involved! Bargain.
Appreciate this 🤙
@bazmeredith are these bearings sealed? A garage told me to re-pack the other side bearing after the drivers side one failed and they replaced. But looks like these are a sealed unit?
Cheers
Dave