how girls assemble the muscle rack ? Nice trick and 100 % success!
HTML-код
- Опубликовано: 24 сен 2018
- i spend around half an hour to finish this rack just by myself! Cheers for girls' power! It did create some difficulties when I do it ,but it's guarantee not a tough job that girls could not done ! A friendly reminder when you lock the brace and beam just find a hammer and make it tight! Thank you for watching!
Кино
The kettlebell was the answer. Instructions said lightly tap with rubber mallet. That did nothing. The kettlebell trick worked like a charm. 10 minutes later I was done. Thanks for the video.
Thank you for this video! I needed help and your triangle method did it for me. 😊😊
Thank you, Wenny! Yes plenty of the guys had issues getting this assembled too, they just did not show it in their video! As everyone says, the instructions are not clear. This is very helpful, and I will be watching your video a few times while I try to assemble this rack. Thank you!
Thank you!!! I need this to assemble my shelves.
Use a rubber malket and it puts it fully in the hole!
THANK YOU for clarifying why my shelf wouldnt hold. Now I know that I had the beams backewards. You are blessing.
Thank you for taking the time to show us women because I would get rid of them, But then again everybody needs to learn how to assemble the shelves. And you are 200% right the company does not send enough details to follow the instructions
Thank you, again Laura
couldn't find any videos of people using those holders thank you !!
Instructions are garbage XD
Sorry I'm not a girl I know I know I suck I shouldn't be here with you ladies
But Thank you awesome video very clear instructions and now I can get past this step :D !!
Girls are so awesome !!
I bought this product. Directions said use couplers. No couplers to be found. RUclipsd it. Found a video how to do it without them. A tad tricky but got it done. This is the video. ruclips.net/video/IswoP6OatV4/видео.html&feature=share
Awesomeness Wenny! Your video helps so much! The instructions suck - I was ok until I got to the couplers, which was a pain in the a$$$! Appreciate girl power! 🙂 Signed Dr V
A rubber mallet is needed as you tap the beams down. They will then set secured.
Girl you rock! Excellent instruction 😁
Watching this video felt like getting reassuring advice from a cheerful friend. I've had the pieces of that rack in the corner of my living room for months! I still need to find couplers for it, but now I'm going to try putting the bottom half together at least!
Thank you so much for this video ..you helped me out! I was not going to ask my husband for help because that never goes over too well. I appreciate this video so much thanks again❤️
Thank you 🙏
Good work
Thank you so much now I can finish my shelf lol I only did the bottom part. Going to finish now. Wow thanks so much 💪👍
Thank you Wenny! Wish I found your video before making my shelf yesterday. You are very correct, the instructions are terrible. The manufacturer could at least create a 2 minute video on how to make the shelf to help out the customers. Take care.
The problem with the couplers is they go exactly where the third shelf should go to make all shelves even. With the coupler in place, you have to add the shelf either above or below making the shelving uneven.
Very helpful video. Thank you.
Very pleased with this item. Keeps good readings
You did an amazing job explaining it, all the videos I saw to connect the coupler were not helpful thank you again for being amazing.
I love how you improvise with the weight
I soooo appreciate this video. Thank you so much for sharing this 🙏
I got mine from a neighbor who was getting rid of his, no couplers with it though for the upper section. Sure could have used them
Thank you for sharing. Mine did not come with couplers to connect the top and bottom.
Mine didn’t either
So how did you connect them? I'm in the same boat
Found this video looking for couplers in 2022. Tell me your revelations, o RUclips commenters of yesteryear!
The instructions say to use a mallet to tap them into place. There's another video of someone doing this.
I love it!
Amazing video. 👌
These are the worst shelves, so heavy but not that sturdy and the particle board almost always comes with corners chipped. Instructions talk about couplers but they aren't on the parts list not included. Having to use the shelving brackets to connect the top and bottom means that the middle shelf won't hold the storage bins that would normally for on each shelf
I think the rack itself works ok, but the instruction is unclear and confused
They’re not made wrong or misaligned, because you’re not supposed to be able to push them in with your hands. You’re supposed to lock it down by banging them in with a mallet.
yep, but my another rack doesn't need a mallet to lock them tight, maybe just different design
Girl, at least you got some instructions. I got none!
Nice work
I can't get the next vertical bars to connect to the lower. Mine didn't come with couplers :(
You need to contact the seller, you can not assemble the shelf without having the coupler and vertical bar...
@4:54 Use a rubber mallet to lock the beams completely.
How to get this please coz it's too simple to build
you can get it from Amazon, or Walmart
Best one one RUclips
I salute you for Proven That Women are CREATED To Always Be Smarter than Ma
N(Men)) I Appreciate Your Candor Also respect God Intelligence and being A strong Independent Hey Men Shud have learned by Now?
Also I Respect your Finesse and plain and dimples art & Final USA was Back then but No Longer thank you for P to noroven Living Reality facts.Your English orIs Honorable!
😊 mk❤
Hi can you tell the price please and exactly measurements. Can you share link
5-shelf steel shelving 48"w*18"d*72"h. Sorry I did not use RUclips for a while. The price is $185
Nice nails.
The instructions included are HORRIBLE! You did a good job, but yeah, you need a rubber mallet to whack the parts into place securely.
I really don't see why everybody is saying this video is great. Wenny had a great idea but doesn't know how to make a video. she moves her cell phone a lot. I couldn't keep watching , My head started hurting, decided not to look, just hear but her heavy accent didn't help much. sorry. If I am writing this is to advice her to learn how to take better videos just in case she wants to keep uploading videos that are really helpful.
The best way is to skip my video and save your time.Cuz I don't feel like people can't tell this video was recorded by camera can give me valuable suggestions.
@@wennyxie1043 hi could you please tell me the name of those things that held the bars together