Hello Fam! I already feel sorry for the pain I cause to your brains shoving too much info in too little time! But I promise it is useful, and it just takes a few years for your brains to recover! And here are the winners of the 4 keysight scopes, thanks everyone: - James Smy. - Ismael El. Fel. Idr. - Marek Per. - Rick Rou.
I really like that you always deliberately make mistakes and then explain what caused them. Then you give the right way to do it. That's a really great way for the audience to learn
Dude you did a better explanation in 20 minutes than my muppet of a lecturer 30 years ago did in two weeks. People take notice of what he is saying. He's spot on.
Education system is for the basics social skills and knowledge. Your own curiosity is what will actually make you smarter Edit: knowledgeable would be a better word than smarter but idc
It might be that you already knew this shit and this was simple enough for you to understand even if you were woken in the middle of the night and made to watch this?
@@whatever7338 Yup. It's 2 AM while watching this and my mouth hurts from yawning rather than my brain from all this explanation. One thing I am sure that this video blew my sleepiness away.
Mr Mehdi BOOM, I'm an Electrical and Electronics Engineering Graduate (Minored in Computer Science) and now I've a Masters Engineering in Power Electronics and Drives. On this Teacher's Day, I must say...I wish I had you as my professor during my graduation and even now. I haven't had this much fun while learning through you as compared to my college while learning stuff. For What its Worth....I Thank You from my heart for everything you've taught us through this channel. I wish there be more and more dedicated and enthusiastic people like you. Bless You and Bless Your ElectroCUTE.
As a NASA electrical engineer with 28 years of experience, a significant portion of that dealing with controls and motors, I must say... This video was absolutely spot on.
Mechanical engineers rise up! Get your pitchforks and torches ready to overthrow him, he who looks down on us! But seriously: I'm using your videos to educate myself a bit about the e-tech field and it helps to understand the colleagues from the electrical department(aka. department of witchcraft). Thanks for that.
I love that you use so many goofy little "mistakes" to teach such important principles. I have never taken any classes on any of the requisite topics, but you simplify it to terminology and experiences that help even a turd like myself to be readily absorbed information.
As only a mere electrician who has by happenstance fell into a job which entails maintaining/servicing dc drives and motors in an industrial setting this video has done a better job at explaining the theory behind them than the many years of “training” from my actual job. For that I say a huge thank you! Spot on and hello from Alberta!
As an EE that works on software validation, I remember seeing all this at school in different classes, somethings I had already forgotten other things I never quite understand up until now. Thanks for the great video, this has reminded me why love electronics.
I would love series on all types of motors, their structure, windings usage and such. It's a pretty hard concept to grasp of all the electromagnetic interactions it's sometimes mindblowing how people even come up with these things!
Thats how it should be taught in schools, but if you ask a question to todays teachers they will spew out the memorised article without actual explanation, because they themselves don't fully understand it the way ElectroBoom does
I hated the Motor topic in my vocational training. I was sleeping most of the time. But I can hear to you for this 20 minutes and I liked it really much. You can teach people pretty good electrical things and you are still funny. Thanks for this
@@WaltSorensen Nah, it's more on the light roast and banther, most of them show respect towards other fields.electrical and mechanical the most because most of the time they have worked with another at some point.
@@mattjmwmatt I still remember my first lesson about AC current vs voltage and the mnemonic was what the lecturer called the "dirty word" CIVIL (capacitive (C) current (I) leads voltage (V), inductive (L) current lags voltage). That was 20 years ago but I switched from electronic to computer engineering soon after, so I have not had a need to use it outside theory.
Can we get a video on the difference between brushed and brushless motors? Or I could just look it up I suppose...but Electroboom videos are more funnn. lol
I really like your dorky ,down to earth teaching methods. I have never really had much interest in electronics. But I started building cool stuff like e-bikes , fixing tools and other projects. And they all have an electrical componant. So coming from a guy with a limited electrical background , I wanted to say thanx. Your very simplistic depictions and models, are really helping me increase my intrest,and knowledge.
I love how concise this video was, you explained the topic to the level that an electrical engineering student like me could actually understand and not get lost with.
I have to admit that, this is the best video I have seen explaining the DC motors. Still remember the pain during the motors class old days in university. Thanks man....
@@Erkorlad i think its like green thumb for gardeners/farmers the way you check the sex of a chick is to check for a tiny little feather on the bottom, which is the only way. we had to breed the birds to have them so we could farm them better.
I had to do this for my E&M Physics lab. Probably the most fun lab I've done in undergrad to date; I even went out and bought all the materials to mess around with it at home as well.
I love the nerding out. Before early retirement, I was in industrial automation and robotics for 30+ years. Thanks for the refresher, need it in my older age, LOL!
ElectroBoom and Big Clive have got to be the yin/yang of youtube electronics channels. Both are very educational; I prefer the calm Scottish accent of Clive, but I think ElectroBoom teaches me more. It's that slight feeling of terror, the fear of ElectroBoom showing up at my doorstep, and god help me if I can't recount the methodology behind driving a DC motor. Great stuff!
I just realized that this video was in 2019, and it’s now march of 2022. I just wanted to say thank you for all your video’s you uploaded to all of us that believe your video’s are a great way of learning. I would like to know what you know about all of the things you’ve done, I have so many idea’s that I want to do. Thank you again. Stay safe and please keep making learning fun for everyone.
thats when you cheat and find an IC or prebuilt module that does the hard bit for you. No shame in doing that as it saves you time you can spend improving other aspects of your design
Interesting! Really awesome to see these motors scaled up. I was a part of the U.S. Coast Guard Cutter Polar Star's crew last year and it was so cool to get to help clean the brushes on one of the three nearly 2 story tall 4.3MW DC motors (While it was running!). They have to be some of the most powerful DC motors in the world. Really a privilege to get to see them in action up close.
Wanted to know in excruciating detail how the brushed motor control work… and you delivered! As usual, never a dull moments. Now, can you cover brushless motor?
for more information on the skipped section at around 3:40 he is talking about how to utilise the right tool for the job, if you only need to apply 1nm of torque then a 5 litre v8 that produces 400nm isnt the right tool. the gearing refers to the ability to change the load while maintaining a speed. if you expect to have more resistance you should use a higher gear ratio (ie 6:1 is more top speed 8:1 is more acceleration) with more rpm
i studied similar things in my master in electrical engineering and luckily i understood the 95% of it, unfortunately when it comes to electronics instead i still have to make some more efforts and study that too, you have a new subscriber keep up the good work :)
Very nicely made, I like the curve that update to be all nice! Very interesting! What about adding a basic Arduino to generate the signal to drive the MOSFET with more control? I'm sure many people have done Arduino programming but have never seen the output signals on a nice Keysight scope ;)
mehdi makes a video explaining electronics People: you have a monobrow, why you have so much curly hair in your hand than your head? your daughter is cute and plays the piano very well
Man, I do love your work, experience, and explanations. I found this channel extremely educational but I wonder why did you choose in this one video to have literally 7 commercial breaks...
I dig how you showed us how to make a DIY one. That was seriously super informative and useful, I didn't really fully get it until then. Super awesome channel
Every once and awhile you gotta let your viewers experience the full depth of your knowledge. My Brain Hurts For anyone who thought getting electrocuted was all that he was good at.
Hey electroboom. I'm a aspiring electrical engineer and your vids just want me to learn so much more just so I can be on the same level as you lol. Your vids make my days and let me know that the degree is totally worth it. Love you man. -austin
This is exactly how I feel talking about frequencies of the body mind and spirit as well as nature… how they interact (lol so simple)… have a great day yall
Thanks. Now I know how does (regenerative) breaking works on electric cars and why they charge battery back while on a trip. I also can imagine (at least on the surface) what engineering challenges engineers faces while developing such technologies.
Hello Fam! I already feel sorry for the pain I cause to your brains shoving too much info in too little time! But I promise it is useful, and it just takes a few years for your brains to recover!
And here are the winners of the 4 keysight scopes, thanks everyone:
- James Smy.
- Ismael El. Fel. Idr.
- Marek Per.
- Rick Rou.
Could you make an video about emf
(Like one of those 101s)
🙏🙏
I made a new youtube channel. Can you please check it out and subscribe if you like.
@@tvtechnicalvideos233you are fat
It was ok
🤯
This is seriously awesome stuff. Thank you!!
Omg I'm a big fan of yours
Zack,Yoou Are here too 😃😃
Third to comment on comment
Hi I'm a fan of you and you two could colab
Umm u have been roasted by him
0:36 _"...and Vibrators... of your mobile phones"_
Smooth EB... Smooth
this xD
'mooo...bile phones'
Yeah that was great.
Elegante! :) JAJA
@@CenKyne where is that video?
I really like that you always deliberately make mistakes and then explain what caused them. Then you give the right way to do it. That's a really great way for the audience to learn
It took me two videos to realize he was doing this on purpose for training and I think Its the best way to teach what not to do
*_I wish you were my Electrical Engineering Professor_*
I am! just over internet... and I don't give out degrees!
@@ElectroBOOM degrees Celsius?
I tought the same!
[B]How could u changed the line,?!
Kelvin smh lol
I love how your intro is just "Hi"
Mehdi:Hi
*everyone liked that*
Vsauce to people: am i a joke to you?
But the outro makes it up for such a short intro
ruclips.net/video/vyti6PkLAD4/видео.html
If you want to learn follow the link
Hi
334
Dude you did a better explanation in 20 minutes than my muppet of a lecturer 30 years ago did in two weeks. People take notice of what he is saying. He's spot on.
Education system is for the basics social skills and knowledge. Your own curiosity is what will actually make you smarter
Edit: knowledgeable would be a better word than smarter but idc
Lecturers hate him! Students love him! Learn electronics with this 1 weird trick!
It might be that you already knew this shit and this was simple enough for you to understand even if you were woken in the middle of the night and made to watch this?
Probably it was explained with all the math in between and not just the concepts.
@@whatever7338 Yup. It's 2 AM while watching this and my mouth hurts from yawning rather than my brain from all this explanation. One thing I am sure that this video blew my sleepiness away.
Mr Mehdi BOOM, I'm an Electrical and Electronics Engineering Graduate (Minored in Computer Science) and now I've a Masters Engineering in Power Electronics and Drives.
On this Teacher's Day, I must say...I wish I had you as my professor during my graduation and even now.
I haven't had this much fun while learning through you as compared to my college while learning stuff.
For What its Worth....I Thank You from my heart for everything you've taught us through this channel.
I wish there be more and more dedicated and enthusiastic people like you. Bless You and Bless Your ElectroCUTE.
Actually understood alot of this thanks Mehdi you explain it so well.
Woow *Clap* *Clap* *Clap* *Clap* *Clap* *Clap* *Clap* *Clap* *Clap*
As a NASA electrical engineer with 28 years of experience, a significant portion of that dealing with controls and motors, I must say...
This video was absolutely spot on.
A NASA engineer who records himself playing rocket league and watches RDR 2 and needs to search up how to replace a speaker... right...
@@joshuapae7633 Believe me, don't believe me, I don't really care.
r/thathappened
@@mattjmwmatt lot of skeptics on here.
@@joshuapae7633 i was about to say that
Mechanical engineers rise up! Get your pitchforks and torches ready to overthrow him, he who looks down on us!
But seriously: I'm using your videos to educate myself a bit about the e-tech field and it helps to understand the colleagues from the electrical department(aka. department of witchcraft). Thanks for that.
Department of witchkraft - thx for making me laugh :)
I really wanted some of the info he glossed over lol.
We tend to call them "pixie wranglers" lol
I love that you use so many goofy little "mistakes" to teach such important principles. I have never taken any classes on any of the requisite topics, but you simplify it to terminology and experiences that help even a turd like myself to be readily absorbed information.
As only a mere electrician who has by happenstance fell into a job which entails maintaining/servicing dc drives and motors in an industrial setting this video has done a better job at explaining the theory behind them than the many years of “training” from my actual job. For that I say a huge thank you! Spot on and hello from Alberta!
Hell yeah man always good to see someone from the oil pit province (hopefully calgary)
It takes almost 1 and half hour just for recording 😵. You're really hard working man. Keep it up. 😊😊
Well it took 3 days, but who's counting
@@ElectroBOOM 😱 decieved by clock in your video
@@ElectroBOOM holy cow.... You really work hard to entertain us....
Please make a video about MOSFETS
I'm an EE student and just in this video you just taught me more than my own university professor thank you Mehdi for being in my life
As an EE that works on software validation, I remember seeing all this at school in different classes, somethings I had already forgotten other things I never quite understand up until now. Thanks for the great video, this has reminded me why love electronics.
I would love series on all types of motors, their structure, windings usage and such. It's a pretty hard concept to grasp of all the electromagnetic interactions it's sometimes mindblowing how people even come up with these things!
That homemade motor was my favorite thing I've seen in awhile, lol
Thats how it should be taught in schools, but if you ask a question to todays teachers they will spew out the memorised article without actual explanation, because they themselves don't fully understand it the way ElectroBoom does
I made something like that in school!
I hated the Motor topic in my vocational training. I was sleeping most of the time. But I can hear to you for this 20 minutes and I liked it really much. You can teach people pretty good electrical things and you are still funny. Thanks for this
I don't understand anything but I still watch the whole video XD
keep watching you will understand. just open your mind close your eyes and listen
No *THIS IS PATRICK*
The same
@@rogerd4559 Keep Watching ... Close your eyes ....
HMMMMMM 🤔🤔🤔🤔🤔
So why are you here sucker xD
“Mechanical engineer minions”
Funny how my mechanical professors say basically the opposite. “Oh the EEs will figure it out eventually”
Yep, I think it really depends on what discipline the project manager is as to who they think are the minions.
Actually most of my EE professors did make fun of mechanical and civil engineering.I guess it's a common thing in engineering.
@@mattjmwmatt yep, each field thinks theirs is best... it's too bad more effort isn't put into working together and utilizing each others strengths.
@@WaltSorensen Nah, it's more on the light roast and banther, most of them show respect towards other fields.electrical and mechanical the most because most of the time they have worked with another at some point.
@@mattjmwmatt I still remember my first lesson about AC current vs voltage and the mnemonic was what the lecturer called the "dirty word" CIVIL (capacitive (C) current (I) leads voltage (V), inductive (L) current lags voltage). That was 20 years ago but I switched from electronic to computer engineering soon after, so I have not had a need to use it outside theory.
19:24 Brushless or brushed DC motors?
Brushed! I was worried I would confuse the two at some point, and I did!
😂😂😂
@@ElectroBOOM See, I watched and listened to every single millisecond of the video! ;-)
Can we get a video on the difference between brushed and brushless motors? Or I could just look it up I suppose...but Electroboom videos are more funnn. lol
@@Hockleberry The difference is brushed ones are cleaner, healthier and smell better 😉
"I need to make a DC motor. I'll cut some pieces out of this CD case..."
3D printer in the background: *Am I a joke to you?*
@Michael Persico Your point being? He has a 3D printer. You can get an EasyThreed X1 for 90 bucks. The cheapest 3D printer on the planet.
MrRedstone he probably didn’t want to wait for the 3d printer lol
the mrredstone from mumbo jumbo
@@PunakiviAddikti You can buy a very big fat motor for 90 bucks.
@@himalkoirala4371 True. But why buy a motor for 90 bucks when you can get a brand new Ender 3 for 120 bucks and print anything you want?
You explained DC motor control theory better than my master's program classes did! Well done putting a concept such as this in laymen's terms!
how did you comment before the video was out??
Patreon donors get early access
EVEN FULLER BRIDGE RECTIFIER! It is NOT a puny full bridge rectifier!
6:25 is the shirt for me! EFBRFTW!
The FOAB: Fullest Of All Bridgerectifiers
My favorite was the MOTHER OF ALL FULLEST BRIDGE RECTIFIERS!!!!
I really like your dorky ,down to earth teaching methods.
I have never really had much interest in electronics. But I started building cool stuff like e-bikes , fixing tools and other projects. And they all have an electrical componant. So coming from a guy with a limited electrical background , I wanted to say thanx. Your very simplistic depictions and models, are really helping me increase my intrest,and knowledge.
I love how concise this video was, you explained the topic to the level that an electrical engineering student like me could actually understand and not get lost with.
Please make videos about NMOS, PMOS and CMOS and their applications...
And vibrators... off your mobile phones.. aha
I see what you did there.
Electroboom doesn't need any insulated gloves. Electroboom is the insulation.
You're a pretentious like-botting piece of garbage.
How are you everywhere!?
I wonder how long until this is top comment
Juystin Y.Is there any place by accident exist out there where i can't see u. just asking.
FUCK OFF
this is giving me ptsd because i literally passed exams about this last year and it gave me head aches
5:08 haha I can't stop laughing about how he picked up the scope and look underneath it. 😃
Freakyboom
I like the mini pause after the "vibrators of your..."
Your daughter is a good piano player
Yeeeaaah
@@DeepakChauhan-mj2wt *_Law & Order_*
*_Special Victims Unit_*
creepy
Anyone knows how the piano piece starting at 0:42 is called?
@@Rastafa469 malagueña by faber
I have to admit that, this is the best video I have seen explaining the DC motors. Still remember the pain during the motors class old days in university.
Thanks man....
"I don't want to assume its gender"... looks underneath it
... is there supposed to be a joke here? You’re legit just explaining someone else’s joke
@@aristology6912 he just found it funny so he commented it, duh people these days
@@Kebabman7069 only green minded people get it LMAO
@@thedarkfighter4093 what the fuck is a green mind
@@Erkorlad i think its like green thumb for gardeners/farmers the way you check the sex of a chick is to check for a tiny little feather on the bottom, which is the only way. we had to breed the birds to have them so we could farm them better.
I watched this video in awe and amazement, but at 75 years old, I didn't understand much! But I couldn't stop watching. Thanks, mate!
I love how when he "rants" about the mechanical considerations of the motors, the clock in the background barely changes.
*sad gears noises*
This is my new favorite channel for my electrical knowledge growth. The booms are really helpful (and hilarious) to truly know how all this works.
I had to do this for my E&M Physics lab. Probably the most fun lab I've done in undergrad to date; I even went out and bought all the materials to mess around with it at home as well.
Your videos are great. You help me look at my work, with “ have fun while you work”, and learn something new at the same time.
When do we get a *Full Bridge Driver* shirt?
I love the nerding out. Before early retirement, I was in industrial automation and robotics for 30+ years. Thanks for the refresher, need it in my older age, LOL!
They are in your vibrators!
Of your mobile phones!! 😁😁😁
I laughed too loudly at that one
@@---jq3od what's so funny?
My brain! I didn't buckle up sufficiently.
exactly
-when you realize the comment was there 8 hours before the release of the video-
It's a timespace traveler
Harrison James Leake how the hell did you comment ont this video 10 hours ago? :O
yea????
Best channel on youtube! Like!
ElectroBoom and Big Clive have got to be the yin/yang of youtube electronics channels.
Both are very educational; I prefer the calm Scottish accent of Clive, but I think ElectroBoom teaches me more. It's that slight feeling of terror, the fear of ElectroBoom showing up at my doorstep, and god help me if I can't recount the methodology behind driving a DC motor.
Great stuff!
(19:24) Brushless DC motors ?!? I thought you were talking about brushed DC motors.
Great video !
I think he was comparing
probably a mix up with "brushed DC motor"
Please never stop using the low res interlaced confetti when you talk about giveaways. It would break my heart.
20 minute video? We have been blessed!
Lol thats true
I just realized that this video was in 2019, and it’s now march of 2022. I just wanted to say thank you for all your video’s you uploaded to all of us that believe your video’s are a great way of learning. I would like to know what you know about all of the things you’ve done, I have so many idea’s that I want to do. Thank you again. Stay safe and please keep making learning fun for everyone.
Another fantastic video. I'd love to see one on 3 phase motors.
Well I was designing a project using a brushed high torque gear box. This video has given me the courage to give up.
Use a relay. (And some protection components)
thats when you cheat and find an IC or prebuilt module that does the hard bit for you. No shame in doing that as it saves you time you can spend improving other aspects of your design
Interesting! Really awesome to see these motors scaled up. I was a part of the U.S. Coast Guard Cutter Polar Star's crew last year and it was so cool to get to help clean the brushes on one of the three nearly 2 story tall 4.3MW DC motors (While it was running!). They have to be some of the most powerful DC motors in the world. Really a privilege to get to see them in action up close.
Wanted to know in excruciating detail how the brushed motor control work… and you delivered! As usual, never a dull moments. Now, can you cover brushless motor?
*What is a dc mordor?*
Well its mordor in dc.
a DC Motor that kills?
you can see small orcs at the brushes
The motor in the Batmobile, It's in DC, 😉
@@AndiTRD Ark!
It's called motor you mordor
Was waiting for a new video all week
Psyco The Psycho Yeah
Oh yeah yeah
"Are you tired yet ?"
Me: "No."
"But wait there's more !"
Me: "Yay !"
simp
@@Ravensyy Ain't say nothing
@@Ravensyy did you have ANY reasons 4 saying that ? Or you just an another man, who "label" someone for... Nothing ?
@@Ravensyy Super intense minecraft player
for more information on the skipped section at around 3:40
he is talking about how to utilise the right tool for the job, if you only need to apply 1nm of torque then a 5 litre v8 that produces 400nm isnt the right tool. the gearing refers to the ability to change the load while maintaining a speed. if you expect to have more resistance you should use a higher gear ratio (ie 6:1 is more top speed 8:1 is more acceleration) with more rpm
EVEN FULLER BRIDGE RECTIFIER
MOTHER OF ALL FULL BRIDGE RECTIFIER
YAAY
Full Bridge Rectum
100th like
Now we need to make a 4-phase EVEN FULLERER BRIDGER RECTIFIERER
We have come a long way since electrocuting guitar memes!
3:46 who also looked at the clock behind him when the clips faded together?😂
This was like 12 videos worth of topics in 1. Very inclusive. I love it.
From his first to last video, they all had one similarity: the intro is "hi" and the ending is the unibrow song or something
And in the middle, he gets hurt and swears.
They're used in vibrator
of your smartphones
"Low level stuff" - uttered the electrical engineer with regretful spite
i studied similar things in my master in electrical engineering and luckily i understood the 95% of it, unfortunately when it comes to electronics instead i still have to make some more efforts and study that too, you have a new subscriber keep up the good work :)
Please tell ElectroCute her piano music sounds great and is a nice addition to your videos. I liked hearing Fur Elise!
Very nicely made, I like the curve that update to be all nice! Very interesting! What about adding a basic Arduino to generate the signal to drive the MOSFET with more control? I'm sure many people have done Arduino programming but have never seen the output signals on a nice Keysight scope ;)
An Arduino has PWM outputs so it may be possible.
how did you comment before the video was out??
Sniper yea man wtf
If I remember correctly, Patreons get earlier access to the videos.
Time machine.
Don't understand electronic but love your videos 😘
*electricity
I just love how he changes the content of the whiteboard without you even noticing a cut. Really makes me appreciate his video editing skills as well.
Your daughter plays the piano really well...
mehdi makes a video explaining electronics
People: you have a monobrow, why you have so much curly hair in your hand than your head? your daughter is cute and plays the piano very well
@@GAMEOVER-yy6zj destruction 💯
Excellent channel! Your sense of humour really makes the videos fun while learning. 🍺😎👍
16:34 scared the shit out of me
very cool video! awesome production and flow of education. my learning blob in my head is learning!
I understood some of these words...
I feel like im learning something but im not sure
Evariste Galois so you’re not only on the anime side of RUclips.
My brain blew up. Like your diode
to high inrush information in short period of time
Can’t we shut up for a second and appreciate how a great pianist is Electrocute.
I'm just a UI developer, I don't understand 95.5% about this channel's videos, but I love this guy.
"The vibrators... ...of your mobile phones".
Not gonna lie, they had us in the first half.
*0:37** Vibrators ..."of your mobile phone"* 🤣
Just the phones
5:08 "I don't want to assume it's gender" and he inspects the bottom of the scope xD Awesome xD
its*
Man, I do love your work, experience, and explanations.
I found this channel extremely educational but I wonder why did you choose in this one video to have literally 7 commercial breaks...
You've given DC motors the brush off.
Was I the only one disturbed by 1:04? Superglue all over the fingers?
Super glue was actually invented to glue skin. If it's pure super glue you can even use it to close wounds. No worries
Kilian Gosewisch pure cyano-acrylate yeah?
I dont think that was the point. I thought he was gonna glue his fingers together or to the magnets... lol we dont worry about glue being bad for you
Surely I thought this was gonna be a gag
Who HASN'T had super glue all over their fingers. Girly boys who wear rubber gloves? Be a man and do it without finger condoms.
*DISCLAIMER: This is not a lesson on how to independently repair your Tesla.*
I dig how you showed us how to make a DIY one. That was seriously super informative and useful, I didn't really fully get it until then. Super awesome channel
Another video for brushless DC next?
Every once and awhile you gotta let your viewers experience the full depth of your knowledge.
My
Brain
Hurts
For anyone who thought getting electrocuted was all that he was good at.
Hey electroboom. I'm a aspiring electrical engineer and your vids just want me to learn so much more just so I can be on the same level as you lol. Your vids make my days and let me know that the degree is totally worth it. Love you man.
-austin
This is exactly how I feel talking about frequencies of the body mind and spirit as well as nature… how they interact (lol so simple)… have a great day yall
Thank you for sharing your knowledge Mehdi!
thank you for being my secondary electrical engineering professor, mr.mehdi
Dr. Mehdi*
''i dont know, i dont wanna assume its gender'' MWWWWAAAHAHAHAHAHAHAHAHAHAHAHAHAHA
THIS CHANNEL IS GOLD I SWEAR
I’m giving away 4 transgender scopes at the end of the video.
He *did* look to see if there is evidence of gender. Reminds me of Gender Bender from Futurama.
Electro boom you are the greatest teacher i have ever experienced thanks for your contribution on youtube
6:55 THAT VOICE CRACK IM DYING FAM
Thanks. Now I know how does (regenerative) breaking works on electric cars and why they charge battery back while on a trip.
I also can imagine (at least on the surface) what engineering challenges engineers faces while developing such technologies.
"Mechanical Engineers minions" LOL
Hey..
That was offensive though.
That hurt me
@@vishnuguptsane4157 Well, im an electromechanical engineer so, im half a minion?
:v
I keep coming back to this one to refresh my memory. Excellent material, sir.