OK , and holy moly.. Why do you not have a ton of subs. I stubled upon you today and JEEEZ, i would trust you with a hearttransplant. you not only are very precise, but also your tempo makes it look like you work in a factory doing this one after another, I SUBBED. And will spread the word.
I have an entire dresser full of devices like iPad, and all sort, the phone and other iPads and tablets and stuff that are all locked and we’re all either going to be given to me or left at my shop. Like this goes a long way in helping me recuperate the cost of repairs on abandoned devices. Thx!!
Thanks for keeping in the issue with the WiFi chip I've had that issue before, never thought the number of the chip would effect service!!! I've learnt something (always do with your channel) thank you❤
Hi Jesse. Thanks for one more amazing video. May I ask, 400c with 60 air to remove such thick xhips or nand for example, doesnt it increase the risk of desoldering all surrounding tiny components to fly out? I use the Atten and that's what happens. Do you put a thiner aftermarket narrow nozzle
What happens when one our old IPads dies and the WiFi chip is compatible with the newer iPad we are trying to repair. If the sn is already registered to my account is there a chance that it will work without purchasing a new WiFi chip and serial number?
My company bought an ipad from an overseas dropshipper that we reliably used for many years. We had one ipad that came out of the box but wouldn't activate. I had a line to higher support but they said that ipad wasn't the same as the number they had on file. It was wifi only, had serial on case, in software and on receipt from seller. I suspected it was lifted to on sell before it was even sold. 1 out of 600 or so ain't so bad.
ok. so this method allows you to update as well? a 3utools bypass works but you would have to do it again after an update ,also u would have to be careful to check there is jailbreak avail to avoid being stuck . software method requires u to be months behind on ios
i thought The serial swap method just does not work anymore, as it is patched. I have tried many devices after back then with paid serials and the same thing "unable to activate error" always.. thanks for this will try again and hope for success.
Only Mini 4 and iPad 5 have been patched. iPad 7 and older are still unlockable. Just have to make sure you get the proper SN and follow the proper procedure for that model
Nice work, but it's questionable spending all that time and effort on older devices. The cost of the labor and parts are probably worth more than the same device bought used unlocked. But hey, to each their own.
Can you make video for bypass icloud both ipad and iphone ? Because lot of scam software stolen money . So if you can please make details video for it . Thank you
A great job, what always fascinates me about your videos is the cleanliness of the work, apart from the professionalism, I always enjoy watching your good videos and I wish you continued success
Bro, after removing the resistor, you had to "unbind wifi" from purple mode. Also, there was no need to remove the resistor, you could disable the baseband with "broken baseband". You tried in vain
Maybe, but that's not how I do it. The method I show is how i've done many many times & it works. I'll try your idea on the next one though & see if you're right
you should absolutely not entertain people with these common questions. you could just reply with the repair wiki link or logi. wiki something like that. or reply with 'hey so I took your question and asked google, and here's what is says'. could be a simple option reply script.
OK , and holy moly.. Why do you not have a ton of subs. I stubled upon you today and JEEEZ, i would trust you with a hearttransplant. you not only are very precise, but also your tempo makes it look like you work in a factory doing this one after another, I SUBBED. And will spread the word.
Wow, thank you! Glad you are enjoying my content 🙏
I have an entire dresser full of devices like iPad, and all sort, the phone and other iPads and tablets and stuff that are all locked and we’re all either going to be given to me or left at my shop. Like this goes a long way in helping me recuperate the cost of repairs on abandoned devices. Thx!!
Exactly 🙌
Thanks for keeping in the issue with the WiFi chip I've had that issue before, never thought the number of the chip would effect service!!! I've learnt something (always do with your channel) thank you❤
Glad to help!
Jesse, do know why you need to replace WIFI IC, you can use purple mode to change SN, MAC, BMAc and unbind wifi
Did you watch the video? It won't work by just unbinding
@@VCCBoardRepairs Yes bro completley watched full video, you can unbind wifi in MagicCFG mac and Magico dfu tool in windows
That won't work
It's not an issue with unbind
@@VCCBoardRepairs OK, You are the Boss Bro
Hi Jesse. Thanks for one more amazing video.
May I ask, 400c with 60 air to remove such thick xhips or nand for example, doesnt it increase the risk of desoldering all surrounding tiny components to fly out?
I use the Atten and that's what happens. Do you put a thiner aftermarket narrow nozzle
No components will fly if you have enough practice & control of your heat gun
Hey Bro what power supply your currently using?
this one: www.vccboardrepairs.com/dcps1
i dont know if Unlocktool can do bypass without replacing new Wifi Chip. but thanks for this idea you did a great Job.. ☺
Not sure. Never tried that tool before
hi. what is needed for the wifi model? utools? and that is all ?
watch the video. if you need a step by step walkthrough on the process, sign up here: www.vccboardrepairs.com/ic
Jesse is this an bypass or its like original way?
it's a new identity for the iPad
@@VCCBoardRepairsso you can update en restore.
What is the best tool to do iCloud unlock services for all models ?
There is none
seriously dude. Seriously?
Do you know why Aliexpress sellers say it doesn’t work with the Pro 9.7 ?
Ah, not sure. I haven't done an iPad Pro 9.7 in a long time
What happens when one our old IPads dies and the WiFi chip is compatible with the newer iPad we are trying to repair. If the sn is already registered to my account is there a chance that it will work without purchasing a new WiFi chip and serial number?
Not sure if you can reuse an SN from your own iPad. I tried that once & it didn't work.
But never tried after that. So maybe it's possible
My company bought an ipad from an overseas dropshipper that we reliably used for many years. We had one ipad that came out of the box but wouldn't activate. I had a line to higher support but they said that ipad wasn't the same as the number they had on file. It was wifi only, had serial on case, in software and on receipt from seller. I suspected it was lifted to on sell before it was even sold. 1 out of 600 or so ain't so bad.
oh crazy!
Can i rewrite serial on ipad air2 no hardware swap.?wifi version
yes
@@VCCBoardRepairs what do i use ?just to be exact
Good to know this Jesse 👍
Thank you very much!
ok. so this method allows you to update as well? a 3utools bypass works but you would have to do it again after an update ,also u would have to be careful to check there is jailbreak avail to avoid being stuck . software method requires u to be months behind on ios
Yes, you can update with no issues
3u Tools doesn't have any bypass methods for Activation Unlocks that I'm aware of
@@VCCBoardRepairs 3u has icloud "bypass" and jailbreaking. which is pointless these days
i thought The serial swap method just does not work anymore, as it is patched. I have tried many devices after back then with paid serials and the same thing "unable to activate error" always.. thanks for this will try again and hope for success.
Only Mini 4 and iPad 5 have been patched. iPad 7 and older are still unlockable. Just have to make sure you get the proper SN and follow the proper procedure for that model
@@VCCBoardRepairs tried and tested!! thanks jesse more repairs to come ^^
the iCloud remove link does not work
Thanks for letting me know. Here is the updated link: www.vccboardrepairs.com/ic
Sherwood Avenue
Thank you! Appreciate the support!
I encounter also this kind of process way back 2019(i think) we need to replace the wifi ic for converting gsm to wifi..💪🏻🍎
yup!
Nice work, but it's questionable spending all that time and effort on older devices. The cost of the labor and parts are probably worth more than the same device bought used unlocked. But hey, to each their own.
Yes, true, but for some people it's worth it. And it keeps this device out of a landfill
@@VCCBoardRepairs - Yes, depends on its value. Whichever's not worth fixing you can still use parts off it to keep as much possible out of landfills.
Can you make video for bypass icloud both ipad and iphone ? Because lot of scam software stolen money . So if you can please make details video for it . Thank you
No I can't unlock iPhones
@@VCCBoardRepairsI mean jailbreak and bypass .
A great job, what always fascinates me about your videos is the cleanliness of the work, apart from the professionalism, I always enjoy watching your good videos and I wish you continued success
Thank you very much!
Jarred Hills
Appreciate it! Thank you so much
Bradtke Meadow
Appreciate it! Thank you so much
Shanahan Ferry
Appreciate it! Thank you so much
Domenica Knolls
Appreciate it! Thank you so much
Ima Meadows
Thank you! Appreciate the support!
Used the the same serial and info in your video and I was successful bigtime!!
in failure😂 joke.
haha oh man, i wondered if anyone would try it lol
Darron Mountain
Thank you! Appreciate the support!
Effertz Plaza
Appreciate it! Thank you so much
Bro, after removing the resistor, you had to "unbind wifi" from purple mode. Also, there was no need to remove the resistor, you could disable the baseband with "broken baseband". You tried in vain
Maybe, but that's not how I do it.
The method I show is how i've done many many times & it works.
I'll try your idea on the next one though & see if you're right
@@VCCBoardRepairs I've done it many times too. Once you try it, you will see that it is easier.
Brandi Coves
Appreciate it! Thank you so much
if you talk less and do shorter vids you have a chance to grow this channel.For now,you are the reason i got a headache from your non stoping talking.
I have short videos on my channel too.
But it's ok. Don't watch it if you don't like it
you should absolutely not entertain people with these common questions. you could just reply with the repair wiki link or logi. wiki something like that. or reply with 'hey so I took your question and asked google, and here's what is says'. could be a simple option reply script.
Haha yeah i kind of do that already
Royce Knolls
Thank you! Appreciate the support!