Это видео недоступно.
Сожалеем об этом.
DIY Raptor Liner Paint Job On A Toyota Pickup!!
HTML-код
- Опубликовано: 1 дек 2020
- The day is here!! A full Raptor Liner paint job!!!
Merch!: avrcustoms.com/
Follow me on Instagram! / austinniemela
Items Used In The Video!
Raptor Liner: amzn.to/3mvXz7i
Raptor Professional Gun: amzn.to/2VpDaVy
3M Auto Masking Tape: amzn.to/3lwUHpI
Masking Film: amzn.to/2VqcLXO
Pre-taped Masking Film: amzn.to/39AODdl
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro Hero 8 Black: amzn.to/31avsTg
Tripod: amzn.to/35P7oY5
Send me stuff!
PO Box 133
Chattaroy WA 99003
![RAPTOR LINER PAINT JOB - How To Paint Your JEEP or 4WD With U-Pol Raptor Liner [Full DIY Guide]](http://i.ytimg.com/vi/OYjQK2oF2W8/mqdefault.jpg)
This is the best DIY Raptor vid I've seen. Painting the inside trim was a great reminder to keep it streamline. Thanks for showing us on how to do this the right way.
Glad it was helpful!
Looks slick. I want to do my 4runner build soon. I think a big important part of streaks and inconsistencies is to finish off with a mist coat standing pretty far back. Thats been my experience with spraying beds anyway. Looking forward to see this truck all back together!
No one post how much paint they use!!
Watched some guys use the full 4 quart kit on a ford excursion. That was a THIN first coat. They said it was thin. I plan on using two kits on my dodge w100. Hope this is somewhat helpful.
Never. Must be getting sponsored by raptor.
I like the raptor. Keep the wheels that are on it and just do a color change. Your doing the truck the way many of us would do it.
Why not raptor line the wheels and inner bed white?
Just saw this post after I suggested painting the wheels. I always liked graphite color. Or Anthracite. I think a darker silver would look good with that color
Bed liner but everywhere but the bed lol. The truck looks sick man
Looks good.. gotta say, the more I see done with the Raptor product. The more I like it. I understand that you can also clear coat or apparently even better ceramic coat over it. Making the color really stand out and preserve the color even better. Something to think about. You mentioned wheels... yeah 20's ughh.. but 16 or 17 inch can give you a little better tire selection than 15's anymore. While still giving you some good sidewall which is good for a off road vehicle. Tiny little side walls are great on street cars. You should be able to easily get a set of 35's to fit depending on offset and width. Anything taller will require a lift for sure and gear change. Be nice to see a topper on the back, also coated with the Raptor liner. Then a exoskeleton roof rack, custom bumber and spare tire carrier, .... endless ideas and looking forward to seeing what's next. Looks good so far.. oh yeah rims... steel old school and painted with you guessed it.. Raptor liner !! ... you know you have a little extra... a splash of brown here and black there... you have a camo truck...
You need some BFgoodrich km3 with a black rim bumper and lights
Looks good. I will be happy if my Raptor spray of my truck turns out as good as yours.
Go with some 17” Raceline Shift in Bronze. I think it would look great with the green raptor liner!
Agreed
You'll have the best luck finding tires with 15's or 17's. If you go to 35's you'll likely need major changes with gearing and transmission control module.
You should put bronze/copper colored wheels on the truck. it would look sweet.
That makes it look INSANE!!!! I think the dents give it some character. 15x12 -44 offset flat black steelies with 35” would finish the tank look. Exo cage might look good too.
Thanks!!
The rig is looking bada$$! It's gonna be the quietest ride ever from inside the cab as well.
Bronze or a darker gold wheel would look good with the green
The titanium and gold method wheels would be sick.
I thought the same. Bronze methods would look bitchin👌
Agreed
The raptor looks badass, but with black rims I think leaving the flares black would’ve looked better.
i am with you !
Yepp
Agree.
Black fenders for the win!!!
Should do the flares in black or leave them off. Bronze wheels or black. If you do the black wheels then flares and maybe lower rockers in black. I know your not fan of the 2 tones.
watching you put up that plastic parts on the table rifle on the wall and your in the north west is giving me the DEXTER feeling lmao
I definitely would have gone black on the fender flares, but it looks amazing.
I can’t stand flares that are a different color
@@austinniemela Oh really? I'm the opposite. I hate color matched. Looks great either way.
@@Clanc54R haha thanks!!
That's actually a great idea. Black accents
Paint looking good. Keep the rims you got for that more old school Baja look. Put 33’s on there. Black tube bumpers. Looking good. I have an ‘85 I’m wanting to do similar on.
Thanks for explaining and showing your mixing ratios!
Somewhat hard to find anybody showing the actual mixing with the tintable raptor.
Green isn’t exactly my color, but truck pretty looks good! This raptor liner is pretty impressive stuff!
Good video 🤙🏼
This thing looks so sick! Black wheels are gonna look great. Although I am curious about the fender flares and how that’s gonna look 🧐
33x10.5 ftw. The 12.5's can look a bit ballon-like on the pickups and 1st gen tacos. Unless you plan to offroad it a lot, in which case go with 12.5. And if powdercoating the rims, can't go wrong with a satin black. A dark bronze/metallic brown could also look great. A buddy did this with a set of the early-mid 90's Toyota pickup/4runner oem alloys. Totally updated the look.
Dexter would be proud
Haha for real!!
this is the raptor video i wanted
Awesome!!
looks great but you broke 2 important rules...never ever spray raptor for door jams, and dont mix more than 2 bottles at a time due to viscosity. why not door jams? well because seals are meant to fit against tight flush surfaces. now you risk water leaks going into your jams because water seeks the path of least resistance and raptop is a textured paint with grooves and valleys. aside from that it looks dope though
you should paint the fender flares blk
You'll never have problems with barnacles sticking to that now. :)
100% difference with the Raptor paint.
Going to be a good looking truck!
If you want a good set of black 15 inch rims, american racing makes one called baja that I have on my 4runner and they look great.
I had a 85 strait axle that I loved. It was red, and I loved the color. It started to rust really bad, and the motor needed rebuilt. I sold it last year to a guy that loved it for $1200. I want to get another one, but they aren't cheap. I paid $2,600 with a head gasket that was getting bad, but it was worth it. This will be mint looking when your done with it!
Yesss! 15's with 33s... Sorry for teasing you. lol I had a 2001 Ranger XLT 4x4 ex cab black no metallic with chrome bumpers. It was lifted 4" with 33" BFG Mud Terrains letters in and American Racing aluminum chrome wheels. I wouldn't even take it on a gravel road! Ive done 14 trucks and that was my favorite. I did a 91 F250 regular cab the same way with 35s. It had an EFI 460 with 4:10.1 limited slips. It was a monster, I'd like to have it now...
Black 15x10 steelies with a 33x12.5 or a 35x12.5 look would look absolutely amazing
I loved it a lot, I imagine the previous owner of this truck will be shocked
Yeah, you should definitely show him it after your done and make a video on that too
@@mrm4155 love to see that!!!!
I’m gonna raptor my 1995 taco. I’m rollin 18 rockstars with 35s . They are a little big for my truck. Looks great!!
I like that you decided to go with something different then everybody else with the aspect of raptor lining it. Im a big toyota truck guy myself and its primarily what my channel focuses on as well. I probably got hella parts that you could use as well! I got fenders for that body style just sitting in my shed. Keep up the grind!
Sweet!
What years would those fender flares fit? I have an 02 tundra and I need a set.
I really like the color. Always like medium to dark greens in general. 33s on 15s sounds great . Not a fan of big wheels especially on little trucks. And I like the idea of body color flares. Everyone does black so this will be a little different and look better IMHO.
The fire in the background is EPIC!! Well done in the set up
Liner doesn't do well on plastics without adhesion promoter. My fender flares ABS material even with adhesion promoter cracked while in the sun for 2 days in Eastern Washington.
That’s not good!!
Copper or that off gold color wheels would look really good
This truck is seriously lucky to land in your garage! Love the videos. Keep the Toyota’s coming !
Thanks! Will do!
You should put Pro Comp 51 Series Rock Crawler Wheels on it, they look really good on my Toyota pickup and are really cheap!!
Thought about those wheels!
Actually true cure time is 28 days 7 days cure is for light duty use only. Should also paint whole vehicle with just the paint and color without texture them immediately paint with the raptor mix . Also should paint whole sides with one pass not just door just fender just door with 75 percent overlap to prevent tiger stripes.
Keep the wheels, black them out with 33" white letter tyres. I reckon same colour raptor coat for the bed/tub. Looks pretty good.
LOOKS AWESOME!!! You should definitely go w powercoating those wheels black!! It would b perfect
got an 86 1ton 4x4 Toyota pickup i just finished brushing down seriously thinking about following your recipe
When I raptor linered my van. I mixed up a bottle at a time and sometimes the raptor liner would harden before I shot the whole bottle. I'm surprised you didn't run into problems mixing 3 bottles at a time
Gotta spray it fast!
@@austinniemela I definitely sprayed fast and the bottles would still start to gum. I'm amazed you got that stuff all onto the truck without it turning into a rock. Good job
I like the wheels you have and I like the idea of powder coating them black. Raptor liner turned out great. I am planning on raptor lining my Samurai. I'm glad you showed up the couple small dents on the right hand bed side so it shows how much it shows. I know what I will leave behind on the Sammy body and that to try and fix.
Thanks! Yeah i thought the raptor would hide dents a little better!
Any reason why you didn't do inside the bed first? I would think that would maybe be the better way to start.
lastly, when done, do a dust coat...it will get rid of all dry and wet spots as the ones u pointed out.
Looks great! I love the style of your wheels, and I think powdercoating them is an awesome idea! Can't wait to see more progress!
That wood stove looks warm, maybe a shop tour video soon?
33x12.50r15’s on 15x8’s look good, running that set up on my rig with 3” suspension and a 3” body lift and looks good. Should send you a picture of my truck, still building though. This is the daily driver and trail truck so not sure if it will ever be finished, but I do get a lot of compliments.
Looks good! Like the color.
Thanks!!
I think the raptor looks good
Glad to see the truck coming together
Love it. Want to do my 1991 Chevy S10. Didn't realize it's 7 days to cure now that's a problem because the truck is outside I've got to find some place to store it while it cures. It's currently the classic red and black but I want to do the light gray and black thanks for an awesome presentation I hope I can get it to be half as good as yours I'll be happy
I’ve done bedliner on all my vehicles and about to do another project on my 94 Dakota. What color did you use for yours?
Dang that raptor looks so cool I’ve seen people paint their truck and raptor liner and then go over it with a regular paint like white because you can’t get a white raptor liner I don’t believe in price they gave the vehicle a nice paint job is still keeping that raptor liner texture
Looks great. Black wheels
I like the look of that bedliner, shame you missed a couple dents though, it really shows with the bedliner on. Great video series.
Rota grid type x powder coat bronze, and do a white liner in the bed
If those are aluminum wheels you could get them anodized 👍🏼 looking good though dude! Love that color.
That was super satisfying
Inspirational mate ! I gotta spray my Hilux soon..
Austin, great job! two questions, do you need primer with raptor liner? would a 6 gallon compressor with a 1.5hp and 150 psi be enough for to get the job done? Ok, one more.. would 2 bottle be enough for a truck camper shell? Thanks bud.
It looks awesome great job
Maybe a gravity feed spray gun with a 2.5 or 3.5 fluid tip would have been a better option for a smoother finish. Still it looks killer
Back in the day Aussie Peco Stars steel spoke wheels would look mint in black ripple powder coat !
Nobody will remember or know Peco’s
Dexter would be proud. 🔪
I really like the idea on the truck that Trina's watching the video I've got a 99 Tahoe but I was fixing to do the same thing too but I was going to do either a matte paint job or rap but I'm really digging the raptor!
Agreed, powder coat the wheels black. Big wheels on off-road trucks is a new thing I don't get, older off-roaders have big tires, simple wheels, sidewall, tread, and height! Like the finish!
Well the trucks with big wheels arent built for the woods
@@austinniemela Like putting a wedding gown on a pig!!!!!!
Nice work. Love the olive drab. Black wheels and 33s will suit it perfectly. Arb front bar (without the hoops) and a warn winch.
very nice, I've only used it as a bed liner. That pro gun looks like it does way better. Nice work man
Looks awesome the black wheels will accent the bed perfectly looking forward to seeing it complete!
I didn't see you use plastic adhesion promoter on the flairs? If you stand farther off with the spray gun and hit the panels again, it helps with streaking you see. Overall looks good
The flares are already painted so a scuff is all thats needed!
As a semi-successful paint company owner: Austin is 100% correct.
If it has already been painted previously then a light scuff sand and cleaning is all that is necessary.
Great video! Please tell me how to source the same color/tint that you used? The U-Pol Greens are not what I want. Thanks Man!
It will be interesting to see how it holds up! I've heard that the added thickness and texture can cause issue with stock gaskets in the doors, and that the clearances between the door/fender can become so small that you can get chips. I love the colour, I think some black raptor liner accents would look great.
First thing that I taught about when I saw him spraying the doors and other areas where lights and such are. I would first do those spots with normal color about the same as the raptor mix and then secure them with tape and do the raptor on the exterior.
Nice paint👍👍❤️
use a normal gravity gun with 2,5 nozzle hundred times better finish and way less material needed
Really nice job 👍👍
I like it. I am thinking of doing the same thing to my truck.
Bullet proof !! so nice, badass truck
Looks great, nice color
I like my chances with the NEtS.... period
Love the look! I have a 2005 Tundra I'm thinking about doing this too. I need to get a bigger compressor to spray it - how many CFM do you think you need to spray on a nice coat?
Nice mix great idea!
I would consider going black on the bed liner. I'm not sure how hard it is to tape over that texture to avoid over spray on the bed rails. That's just my taste though.
Looks amazing
PLEASE get some some SCS F5s in Gunmetal absolutely cleanest Toyota enthusiasts wheels you could possibly put on that truck!!
Il check it out!
When done, step back 3 feet and do a mist coat. Evens sheen and eliminates stripes.
So I'm a year in with raptor linering my hole jeep wrangler inside and out and I tires stick out 9 inches . It's a rock throwing mother trucker and with that being said I drive it every day 2 miles down the gravel and 30 miles on the highway to work I beat the absolute piss out of my jeep and the raptor liner still looks brand new and hasnciped yet. I used 8 bottles on the outside and 4 inside. And my wife and I couldn't be happier.
Looks great bud nice job
I think it is the wheels that are killing the look, the raptor liner actually looks pretty cool. As for the wheels, I say try polishing them first, and see how the look changes. I mean, this is a budget build right? Otherwise I would say some military looking steelies would match the truck.
My 08 tundra has been done for 2 year's. Holding up pretty good. Some scratches. No waxing, no stone chips, power wash clean. People ask about it all the time.
How many gallons of paint did you use
@@joshlatcha9540 I used 12 tintable and 4 black. Did rockers black and 2 hood stripes. 2 coats of each.
@@ddnmd So you did 12 quarts
@@ddnmd Of the one color
@@joshlatcha9540 of the tinted. Buy off ebay, cheapest way.
OD Green is never a bad color. Looks good
Thanks!!
Hey awesome job! Can you film part of the reinstall for the trim and seals? I'm thinking about doing this to my truck but im hesitant on how the seals will fit. I haven't found a good video showing it afterwards.
Yes workin on that video now! They are simple to install
@@austinniemela I wish you were up in my area where I live I'm painting for the first time in my life and I'm getting nervous that I'm going to mess it up I've already Prime my entire vehicle small vehicle Toyota RAV4 and I guess I have to spray adhesive spray first before I Raptor line it and I feel like I'm going to mess the whole thing up I'm from East New York Brooklyn but I'm currently living in Syracuse New York
You have it looking good, the black bed will help break it up. How well do the door gaskets seal on the Raptor?
Should seal just fine
Nice! Would u mind sharing the color you used?
My van was pretty streaky on the first coat. So I shot another coat and really focused on shooting an even coat and I had no streaks or differences in texture
Thank you for sharing the useful info
Now I gotta buy Raptor liner