How to Install 2014-2015 Chevrolet Silverado Headlight LEDs | Diode Dynamics
HTML-код
- Опубликовано: 2 авг 2024
- *This product is not DOT compliant for use in headlamps on public roads in the United States.
How to rotate the collar on our SL1 Bulbs:
• SL1 LED Bulb Collar Ro...
Get your SL1 LED Headlight Bulbs here: www.diodedynamics.com/low-bea...
How do we test and measure products? Learn more here: www.diodedynamics.com/product...
0:00 Introduction
Drivers Side Low Beam
0:14 Removing Factory Dust Cap
0:23 Disconnecting Factory Halogen Bulb
0:34 Installing SL1 LED Bulb
0:54 Re-Installing Factory Dust Cap
Passenger Side Low Beam
1:09 Removing Factory Trim
1:27 Removing Factory Airbox
2:09 Removing Factory Dust Cover
2:20 Removing Factory Dust Cap
2:26 Disconnecting Factory Halogen Bulb
2:40 Installing SL1 LED Bulb
2:58 Re-Installing Factory Dust Cap
3:03 Re-Installing Factory Dust Cover
3:08 Re-Installing Factory Airbox
3:26 Summary
This video highlights the easy installation steps of Diode Dynamics H11-size SL1 LED Low Beam Headlight Bulbs for the 2014-2015 Chevrolet Silverado. At 1,630 lab-verified lumens, these LED bulbs provide FAR better visibility than the Silverado's stock halogen headlights.
Thanks to the advanced optical design, SL1 LED Headlight Bulbs produce a clean, OEM-like beam pattern with NO added glare! Best of all, the SL1 is a 100% plug-and-play LED upgrade for the 2014-2015 Chevrolet Silverado.
Our SL1 LED Headlight Bulbs are proudly manufactured right here in the U.S.A, and backed with a 3-year worry-free warranty.
Email us with any questions at contact@diodedynamics.com or call 314-205-3033. Thanks for watching!
Products shown:
DD0217P 
Авто/Мото
HUGE TIP!! Make sure you guys disconnect the negative battery terminal first! This will keep it from throwing the check engine light when disconnecting the Mass air flow sensor. The rest is as easy as the video shows!
I didnt have to do that and had no issue
DSNCB919 better safe than sorry
Great install, at least you guys mentioned the bulb size, while your competitors didn't, I would have purchased a set, but I also want to replace the high beams and fog lights too in my truck. Thanks for the information.......
No problem, James! We do have Fog Light LEDs for your Silverado currently, and we hope to have a compatible High Beam LED option in the near future!
Be advised that you may have to disconnect the negative battery cable. When you mess with the air flow sensor. The engine light comes on. I have 2015 LTZ.
Thanks for sharing that tip! 👍
Hi there,
I'm from Europe and most cars over here (also mine, VW Group) are with an H7 socket.
Do you sell these LED bulbs in H7 size?
I will buy them in the USA when I fly over to the States in September this year.
Thanks a lot!
Best regards from The Netherlands 🇳🇱
Hi Bob! Though we don't currently offer an H7 LED headlight bulb, we plan to release more sizes in the coming months!
@@FamilieBeer You got it!
How do these LEDs work in a reflective housing? Wont they blind incoming traffic since they are not in a projective housing?
That's correct! These were designed to mimic the halogen filament location, so it provides more light output to the road where you need it, without causing glare to oncoming traffic. They are compatible with both reflector and projector housings. Check out the video below for more information on using LED bulbs in reflector housings!
ruclips.net/video/38xti__ef_g/видео.html
I dont have that much space on my dfivers side dealing with the dust cap and that bar that is right behind them. Mine basically touch the bar...
Hey there - might be a tight fit, but you should be able to get it installed like in the video!
@@ItsAsylum, sorry to hear that!
I was gathering my cart to purchase my sets of lows and highs for my 14 silverado, until I noticed high beams are not offered. I regularly drive with my high beams as I work 2nd shift and live in the country. Being that color temperature varies from brand and company, I do not want two types of colors when I flick back and forth. Any options available? I really like that you are USA built. I would like to support that, and the quality it comes with. Please let me know.
Thanks!
Hey Steve - we do not offer a high beam for this specific vehicle due to a fitment issue. Overall, these bulbs are very universal and work in the majority of cases, with some rare exceptions like the Silverado.
@@diodedynamics so you insinuating buy 2 low beam sets?
Also, how is fitment any different in the low beam co figuration as apposed to the highs?
@@LarsonFishing, we would just recommend one set of low beams. The fitment will differ from location to location based on space restrictions, bulb size, etc. Through our thorough testing at our facility, we have found this does not work, which is why we do not have a listing for it - sorry!
Anyway I can pay for the development of the high beam fitting? Willing to go as high as 60 thousand for the RnD
@@LarsonFishing, this is something that we hope to correct in the future with a future iteration of the product, however we do not take on custom R&D projects like this - sorry!
How difficult would this process be on the passenger side if you have a KAI?
Hi Randy! The application will vary between different brands of intakes. If you have an intake that has an exposed air filter instead of a filter box, you may just need to remove the filter to gain access to the back of the headlamp!
Does this also fit Silverados with projectors and can the dust cover go back on with no issue?
Hey there!
Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and our service team would be happy to help you with that!
Is it ok to store the driver inside the housing along with the light ?
Yes! We recommend you tuck the driver inside the housing so the dust cap can be reinstalled!
Good how to video..sadly chevy designed poorly for access to change headlights among other things. That front right passenger side headlights not as easy as drivers side
I did this without moving that bar
Thank you for the feedback! There are many ways to complete the install! The way we have shown is the way we found was the easiest for our application!
Do these have any effect of the lighting system? Such as pull more electricity etc...
These have no negative effects on the electrical system of the vehicle. These will pull less power than your stock bulbs do!
@@diodedynamics do they get hot..was told by dealership it would avoid my warranty cause they can catch fire
@@stonemtnrubicon, They get warm to the touch, but a stock bulb actually gets much hotter than this bulb will. This will not void your warranty.
@@diodedynamics do they work as the day time running lights
@@stonemtnrubicon, these bulbs work just like the OEM bulbs in your vehicle do - no changes there!
Do you have fog lights to match blinkers?
Hey Anthony - while they will not necessarily match the blinkers, we do offer a number of plug and play options for the fog lights in both white and yellow colors. Take a look at our website under the "Find Your Vehicle" section to find all of the compatible options there!
What is the fig light bulb number
I just installed these and my check engine light came on when the install was finished and also the oil pressure of the truck rises when I give gas or go a little faster on the street.
But it goes back to normal when I’m driving speed limit
Hmm that's strange. We've never heard of that. What kind of vehicle do you have?
Diode Dynamics I have a 2014 Chevy Silverado, the light are perfect and everything. I just notice today that one side is a bit brighter than the other and the actual headlights are brand new
@@patrickmartinez3102 Go ahead and email us at contact@diodedynamics.com, and our service team can help you troubleshoot!
It’s from unplugging your maf sensor
Man the right side is a lot of work just to get the bulb headlight
How come no one is doing the bottom bulbs? Are they harder to get to or something?
It is more of a process, yes. You will have to take out the housing to get to the bottom high beam bulb.
Here is a video that shows you how to do that!
ruclips.net/video/YPkjqQ3-yeU/видео.html
Anyone else have issues with the beam pattern? I have them installed correctly but there is no clear cut off line
Hey there! If the cutoff is not clear, the collar will likely have to be re-clocked. Here is a link to another video showing how to do this!
ruclips.net/video/Mo7Tmbml3Fc/видео.html
Do i need anti flicker for 2015 Silverado for led headlights low and high beam
Hello Jay! Luckily our Anti-Flicker Modules were not required for anything on this Silverado. If you have any other questions, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com!
Fog light bulbs available?
Why don’t y’all offer Leds for the High beams?
We have seen there are fitment issues with the high beams, which is why you do not see a listing - sorry!
Fog light bulbs available?
Great question! We do offer our SLF plug-and-play fog light bulbs in 6K cool white or 3K selective yellow.
www.diodedynamics.com/fog-light-leds-for-2007-2015-chevrolet-silverado-pair.html
If you want the highest-performance fog light option on the market, we do offer an SS3 fog light kit for the 07-15 Silverado!
www.diodedynamics.com/ss3-led-fog-light-kit-for-2007-2015-chevrolet-silverado.html
Headlights Silverado color ?
The SL1 is rated at a 5700K color temperature - a very nice white color!
Los
My eyesight has been marginal since birth. With experience and careful defensive driving habits I have not been in an accident for decades; HOWEVER companies like yours do not consider how you are affecting road safety! Continuing to "up the ante" on lumens is so very cold in the service of greed. Wish there were ample regulations to put you out of business. I encounter these blinding headlights often and when it is raining it makes it almost impossible for me to see.
We're sorry to hear about that. Here at Diode Dynamics, we separate ourselves from other brands by focusing light output only where the driver needs it. Our SL1 LED bulbs were engineered, designed, and tested in house at our headquarters in St. Louis, MO to mimic the filament output pattern to that of factory halogen bulbs. You won't find that in cheap LED options. One common mistake many LED users make is improperly aiming their headlights, making driving challenging for other drivers around them. This is out of our control, however we do have a video on how to aim your headlights to meet DOT standards. you can find the link to that video below.
We pride ourselves in making the driving experience better for our customers, while not hindering visibility to other drivers. Thanks for checking us out!
ruclips.net/video/HaZzCq5egDY/видео.htmlsi=CLSEvT0QNlBo3v0C
You're right everyone should bend to your needs. If you can't see you probably shouldn't be driving in those conditions. Sit down.
Came on here just to complain😂😂😂