How to Replace Rear Shocks 2013-2020 Nissan Pathfinder

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install shock absorbers on your 2013-2020 Nissan Pathfinder. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This process should be similar on the following vehicles:
2013 Nissan Pathfinder
2014 Nissan Pathfinder
2015 Nissan Pathfinder
2016 Nissan Pathfinder
2017 Nissan Pathfinder
2018 Nissan Pathfinder
2019 Nissan Pathfinder
2020 Nissan Pathfinder
Tools you will need:
• 8mm Wrench 1aau.to/oiA/1AX...
• 13mm Socket 1aau.to/obMG/1A...
• 18mm Socket 1aau.to/oatm/1A...
• 21mm Socket 1aau.to/oatm/1A...
• Large Locking Pliers
• 1/2 Inch Impact Gun 1aau.to/owo/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obRf/1A...
• Socket Extensions 1aau.to/obMG/1A...
• Torque Wrench 1aau.to/oaUM/1A...
• Gloves 1aau.to/oaAD/1A...
• Safety Glasses
• Floor Jack 1aau.to/oaiU/1A...
• Jack Stands 1aau.to/o69/1AX...
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@122willman]

what is the top mount called? Do you have to buy two different pieces boot and mount or can you get that piece all in one?

[@traintrackerdave9026]

Is the rubber bellows/boot removable from the mount before taking mount off old shock?

[@kevinr9109]

Thank great video

[@ErnestoMunoz2075]

Cool. 😃😃😃

[@jsnouffer680]

I dont want to keep spinning shaft so I don't damage anything internally then holds nut and turns shaft 😂