Call I want to know about because I drive a trash truck and my guy's hands get very cold and there's no way for them to load cans without freezing their hands off
Tried to make this and the wire gets so hot even with a 18v battery pack. Did find another video where they use beading wire which needs less power and can run for 1hr 30mins off a 3.7v battery with 1000mha
I'm 'currently' doing some testing on heated gloves. Air temp, moisture, wind plays a part... approx 5 to 12 minutes. You can speed it up a bit by tucking your gloves under your armpits before you juice'm up. _The whole key is a 2nd layer of almost anything over the heating area to hold in the heat. Thin neoprene works the best but is a little stiff. I used ultra-thin neoprene with one side sticky & it worked out REALLY good.
Inventors are back!!
Hey were did you buy the carbon fiber wired?
Call I want to know about because I drive a trash truck and my guy's hands get very cold and there's no way for them to load cans without freezing their hands off
Man try aerogel. No battery required. NASA technology.
Tried to make this and the wire gets so hot even with a 18v battery pack. Did find another video where they use beading wire which needs less power and can run for 1hr 30mins off a 3.7v battery with 1000mha
The 1st problem I saw before watching the whole video was you are using hot glue . Won't the heating element melt the hot glue ?
Shoe glue is probably the better choice
How much time to taken hands warming
I'm 'currently' doing some testing on heated gloves. Air temp, moisture, wind plays a part... approx 5 to 12 minutes. You can speed it up a bit by tucking your gloves under your armpits before you juice'm up.
_The whole key is a 2nd layer of almost anything over the heating area to hold in the heat. Thin neoprene works the best but is a little stiff. I used ultra-thin neoprene with one side sticky & it worked out REALLY good.
Making a ground/earthing glove, tks: will put copper wire n ground wire inside glove. May God bless you.
Is there video about drone