Glad to see another bass repair/cleaning video! Awesome work as usual, I hope that lovely P-bass will now found a new owner, who will take good care of her.
Nice work as always! However I would like to point out that the longer saddle screws should be for the D and G strings while the shorter ones should be for the E and A strings. That will help to intonate them properly. Keep up the good work!
Ragazzi è tornato il mitico maestro con un nuovo video !!!!!!!!! di certo era ben corroso ma guardando tutti i passaggio il risultato e un basso vissuto che ha ancora da dare. Affascinante il colore adesso brilla di luce da spento che era ora illumina la stanza sei un grande e apprezzo sempre quello che fai da te c'è sempre da imparare. Ti ringrazio di condividere sempre i tuo lavori (odio gli adesivi ) il capo tasto e stato ricostruito a regola d'arte
21:24 - For future reference and those of us playing along at home, the long screws go on the D and G side and the short screws go on the E and A side.
Every now and again you have to do something easy like this so that you don't lose your mind, yes? It looks great, and cool playing at the end, too! あなたがあなたの心を失わないように、あなたは時々このような簡単なことをしなければなりませんか？それは素晴らしく見え、最後にもクールな演奏もあります！
Nice job! I never could understand that level of apathy in upkeep and dumb sticker placement....so lame. Hopefully that bass goes to someone who will value it
Here's a great reason why you don't want paper stickers on your guitars. If you are going to put decals or stickers on your guitar, go for a vinyl or plastic medium of artwork. Here are three ways to remove sticker and decals. To remove glue from a removed decal you can use another sticker (again, non paper based) that has stronger glue that will require a dab and pull method. This works well and may take some time. You can use Goo Gone but that is a bit on the messy side as the glue balls up and gums up. This is the method I use the least as it tends to be the messiest. You can use Naptha or lighter fluid but you have to be careful of both a fire ignition source (you don't want to start a fire) so you want to do this away from just about anything elese. You also you have to be mindful of the paper towel/rag you use as again, it can catch fire if you discard it carelessly in a trash can. This method is probably the quickest but it also tends to leave a haze. After you clean off the glue you will want to use a guitar polish on the area and to shine it up so as not to leave a dull patch on your guitar. If the decal has been on there a long time you may have a ghosting effect which is caused by a UV difference of exposure. That would be a refin issue.
I admire your work on these guitars, but 30fps lacks the motion clarity needed for the close up panning shots... Much of the detail you aim to show (therefore the close up) is lost due to motion blur. I know you have older videos at 60fps, maybe reconsider?
The frets are very bad, that' why it sounds awful on lower notes (for precision bass)... knobs are like on affinity series. i feel sorry for Fender.....
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
It’s so interesting to see a instrument with electronics built into it
(Greetings from Ireland 🇮🇪)
These are so uncommonly satisfying to watch, it's wonderful. Hello from the United States.
アトランタからのご挨拶です。このビデオを共有していただきありがとうございます。とても楽しく見ています。
thanx!!
Glad to see another bass repair/cleaning video!
Awesome work as usual, I hope that lovely P-bass will now found a new owner, who will take good care of her.
何気に器用な人なら何とかなる個体ばかりだ。
ネック折れとか、ボディー割れの個体をリペアする所を観たいね。
Amazing work again by the guitar doctor... I mean bass doctor in this case 😂... Studio asyl! ❤ Love it! Loved the playing at the end too! 👏👏👏
Nice work as always! However I would like to point out that the longer saddle screws should be for the D and G strings while the shorter ones should be for the E and A strings. That will help to intonate them properly. Keep up the good work!
Just needed a little TLC and you brought it back to life…great job!
Love how that white pick guard ages to that beautiful cream color..👌
It’s been a while since I’ve seen a bass cleaning video. Great job!
I know it's against the rules but I would have bought a black pickguard.
All black precisions with maple board look so cool and timeless.
A shame a nice Bass like that in the condition that it was in. You did a wonderful job of fixing it.
Another Bass back to Life/to Rock 🤘🏻 by the way with a wonderful lovely Patina ❤️👍🏻
Ragazzi è tornato il mitico maestro con un nuovo video !!!!!!!!! di certo era ben corroso ma guardando tutti i passaggio il risultato e un basso vissuto che ha ancora da dare. Affascinante il colore adesso brilla di luce da spento che era ora illumina la stanza sei un grande e apprezzo sempre quello che fai da te c'è sempre da imparare. Ti ringrazio di condividere sempre i tuo lavori (odio gli adesivi ) il capo tasto e stato ricostruito a regola d'arte
A softer ride for you this time SA. Nice work as always 👍
Nice clean up. It wasn’t in too bad a condition as some of the ones you’ve worked miracles on.
21:24 - For future reference and those of us playing along at home, the long screws go on the D and G side and the short screws go on the E and A side.
Every now and again you have to do something easy like this so that you don't lose your mind, yes? It looks great, and cool playing at the end, too!
あなたがあなたの心を失わないように、あなたは時々このような簡単なことをしなければなりませんか？それは素晴らしく見え、最後にもクールな演奏もあります！
Hi Asyl, just so you know, the English title should say "Bass" guitar. Love your work either way ❤
All it took was some cleaning & polishing, nicely done!👍👍
Nice work. Perhaps some peroxide and uv light to fix the yellowing of the pickguard. :)
Nice but you can't ignore the fret dents. It needs a complete fret filing job.
nicely done its about time you got a new wire brush
He's due for some new Dremel polishing wheels.
今回もお疲れ様でした🎉
今回は塗装がありませんでしたが毎回塗装は勉強になります😅
beautiful job !! well done
ちょっと道を外しかけたギャルが髪を黒く染め戻して美人に生まれ変わったような…(笑)
How did that base get so rusty? It's like someone took it to the field and buried it under third bass.
Lovely work, as always. Commitment and dedication. I'm curious about the switched intonation screws, yet.
Como siempre, magnífico trabajo amigo
👏👏👏Amazing work! greetings from México.
Nice job! I never could understand that level of apathy in upkeep and dumb sticker placement....so lame. Hopefully that bass goes to someone who will value it
Excellent work! 😊 👍🏻
beautiful work. what's the first song you played in the trial?
Oh no, the relic had cost a fortune 🤭
NICE!
Here's a great reason why you don't want paper stickers on your guitars. If you are going to put decals or stickers on your guitar, go for a vinyl or plastic medium of artwork.
Here are three ways to remove sticker and decals.
To remove glue from a removed decal you can use another sticker (again, non paper based) that has stronger glue that will require a dab and pull method. This works well and may take some time.
You can use Goo Gone but that is a bit on the messy side as the glue balls up and gums up. This is the method I use the least as it tends to be the messiest.
You can use Naptha or lighter fluid but you have to be careful of both a fire ignition source (you don't want to start a fire) so you want to do this away from just about anything elese. You also you have to be mindful of the paper towel/rag you use as again, it can catch fire if you discard it carelessly in a trash can. This method is probably the quickest but it also tends to leave a haze.
After you clean off the glue you will want to use a guitar polish on the area and to shine it up so as not to leave a dull patch on your guitar. If the decal has been on there a long time you may have a ghosting effect which is caused by a UV difference of exposure. That would be a refin issue.
Great work, but that pick guard should have been replaced. Old yellowed plastic is horrible.
👏🏻👏🏻👏🏻👏🏻👏🏻
Great job!
Is that a Tokai stamp in the neck pocket?
This one needs a refret.
ここのおかげで ジャンクのエレキ ぴかぴかにリペアできました
Когда-то он научится менять лады. Но не сегодня. Увы, не сегодня…😔
👍👍👍
Sugoi 🙏✌️🤘🏴🇦🇺
At least the prior owner didn't do the ridiculous amount of damage you usually have to repair.
Отлично получается из хромированного и никелированного делать щёткой по металлу полированную ржавейку.
That P-bass is asking for an black-cream-black pickguard.
Why don't change this pickguard?
And the screws by inox?
Shhhh.. My favorite Asian novel has started!
I admire your work on these guitars, but 30fps lacks the motion clarity needed for the close up panning shots... Much of the detail you aim to show (therefore the close up) is lost due to motion blur. I know you have older videos at 60fps, maybe reconsider?
The frets are very bad, that' why it sounds awful on lower notes (for precision bass)... knobs are like on affinity series. i feel sorry for Fender.....
Hi. Studio asyl how are you doing 😊
100% on this. Mojo/DNA/dirt is gross. Get a grip, and clean your guitar.
Except the demo was, “a guitar player playing a bass.”
*bass
Spelled Bass ...
Bass needs a refret
Wierd... its a 60s reissue body (PB62) witha 50's reissue neck (PB58)band 70's reissue tuners... nice bass though
Bass
Bass, not base
👍🎉🔥🤝🤔
Bass not base
great job!