Just seen this on my local marketplace. Awesome build for a good price. I have a boosted, b20v, awd, 5spd. I made 267whp on 14psi on the greddy kit. Finally going with a built b18 but my clutch got sent to my neighbor and they kept it so im fighting with fedex😢.
@@Donnythelatemodeltech Yeah, I appreciate it. I bought it (CC stage 4) from Humble Performance because I've been watching their channel for years. I was not pleased with how they initially handled the situation but am giving them time to resolve it before I drag their name through the dirt.
@9krpmsrotationsperminute971 Well psi is not a great way to look at it. Your turbo may be larger and moving alot more volume. I had a greddy 18g which is fairly small but spools quick. Also, the b20 I had was very limited on what I could do.
Ypu haveone lead off the oil one for the car you can put a connector that goes in the wire and run it in from the pressure sensor to that you have 26:18
You need to adjust the timing or put a set of valves and port polish intake manifold and put a piece of foam in that intake pipe you have so no water sucks up in it 27:13
Bro, the progress is super dope to see. Been subbed for a decent while. Btw, i have a black 98 awd manual that I'd let go for $1500. Moving to the Philippines for a few years at least. Has two codes, one is tps the other is iacv I believe. Trans shifts damned good and other than the idle issue the engine is crazy strong. Previous owner said its a jdm b20. Otherwise have $4500 in receipts over the last 3 years for new cat clutch full tune up and all fluids including Trans and different, new master and slave cylinder. Most the major maintenance is done. Interior is very decent. title appears clean on title however it when searching records it was stolen from the previous owner. Again, title has zero indicated of salvage and is in my name. Only have about a month left till I have to go. Im San diego. I would love to see you start a new project with it. Let me know.
Wow , that’s a great offer and really do appreciate it. But, sadly my CRV days might be over, currently this car is for sale. I’ve got some health issues I’m dealing this currently and heavy wrenching I currently can’t handle.
@@Donnythelatemodeltech sorry to hear. Well wishes upon well wishes! Probably going to do an awd 2nd gen oddessy in the Philippines. Probably have another 1st gen crv as well. Ok, well take care! Thanks!
Great video. I bought a 98 crv I bought recently. Definitely a love/ have relationship for me. Such a p.i.t.a. to work on because of North East rust in my state...
Hi Donny, I’ve been trying to mod my 2021 Honda crv and came across this video, you inspired me to do what you do. Did you go to school for this or how did you learn how to basically build a car?
Hi there brother I got a crv same is yours I'm going to lowered and Im going to need the same extenders where do you get them if you can share the link or part number o really appreciate it ..thanks by the way nice crv !!
@@Donnythelatemodeltech Thanks for the extra info, how much of a power increase would you say you have gained over stock b20 power? My crv is my family car and I'm trying to push some good decent power but nothing to absurd. I have a turbo Sentra ser spec v and it's to much for my kid 😅, but he also likes my fast cars haha.
Just seen this on my local marketplace. Awesome build for a good price. I have a boosted, b20v, awd, 5spd. I made 267whp on 14psi on the greddy kit. Finally going with a built b18 but my clutch got sent to my neighbor and they kept it so im fighting with fedex😢.
Nice 👍
Sorry about the clutch.
@@Donnythelatemodeltech Yeah, I appreciate it. I bought it (CC stage 4) from Humble Performance because I've been watching their channel for years. I was not pleased with how they initially handled the situation but am giving them time to resolve it before I drag their name through the dirt.
Wtf 260hp that's kinda weak, my turbo GSR makes 412whp with only 13psi?
@9krpmsrotationsperminute971 Well psi is not a great way to look at it. Your turbo may be larger and moving alot more volume. I had a greddy 18g which is fairly small but spools quick. Also, the b20 I had was very limited on what I could do.
This man is an Ace Master mechanic. Glad I found the channel.
Didn’t know it was you at 1st.. loving the recap episode ✌🏽
Thanks Brother. Happy New Year!
Ypu haveone lead off the oil one for the car you can put a connector that goes in the wire and run it in from the pressure sensor to that you have 26:18
Awesome documentary of a rd1
lol thanks man!
🔥Amazing content! Kept my attention from start to finish. I have a 07 Crv, definitely love this build.
Most appreciated! Happy New Year!
You need to adjust the timing or put a set of valves and port polish intake manifold and put a piece of foam in that intake pipe you have so no water sucks up in it 27:13
I found you on your garage door spring replacement. Big help. I'm a car guy too, so I just subscribed.
Bro, the progress is super dope to see. Been subbed for a decent while. Btw, i have a black 98 awd manual that I'd let go for $1500. Moving to the Philippines for a few years at least. Has two codes, one is tps the other is iacv I believe. Trans shifts damned good and other than the idle issue the engine is crazy strong. Previous owner said its a jdm b20. Otherwise have $4500 in receipts over the last 3 years for new cat clutch full tune up and all fluids including Trans and different, new master and slave cylinder. Most the major maintenance is done. Interior is very decent. title appears clean on title however it when searching records it was stolen from the previous owner. Again, title has zero indicated of salvage and is in my name. Only have about a month left till I have to go. Im San diego. I would love to see you start a new project with it. Let me know.
Wow , that’s a great offer and really do appreciate it. But, sadly my CRV days might be over, currently this car is for sale. I’ve got some health issues I’m dealing this currently and heavy wrenching I currently can’t handle.
@@Donnythelatemodeltech sorry to hear. Well wishes upon well wishes! Probably going to do an awd 2nd gen oddessy in the Philippines. Probably have another 1st gen crv as well. Ok, well take care! Thanks!
awsome videos! BTW where did you get the creeper?
Great video. I bought a 98 crv I bought recently. Definitely a love/ have relationship for me. Such a p.i.t.a. to work on because of North East rust in my state...
Right on!👍
Same dude. I got to fix mine but it ain't rusty.
the left front mount can you share where you find it? BTW Your crv look sick
Hi Donny, I’ve been trying to mod my 2021 Honda crv and came across this video, you inspired me to do what you do. Did you go to school for this or how did you learn how to basically build a car?
20 years as an Automotive technician
W mans, I got a 2000 crv I’m messing with and don’t know where to start hah
👍
Always well spoken and quality material. Awesome; Thank you
Very appreciated.
Were did you get the boots for the axles 7:12
22:28 To block guard or to not block guard. That is the question. I’m going with using block guard my B20. Thoughts?
Yeah, I thought about it. Wouldn’t hurt.
Hi there brother I got a crv same is yours I'm going to lowered and Im going to need the same extenders where do you get them if you can share the link or part number o really appreciate it ..thanks by the way nice crv !!
Hopefully we get more Crv content soon!
Was the front lip a 97 Cherokee?
I have a 5 speed rd1 and want to do a VTEC build. How much in total would you say the VTEC part of this build cost you?
I spent at least 1500. Machined head, ecu , injectors, gasket , VTEC oil kit, arp head studs, aem afr , had to source cams and VTEC solenoid.
Power steering was something I didn’t really show in the videos, bracket and pump from a 99 si .
@@Donnythelatemodeltech Thanks for the extra info, how much of a power increase would you say you have gained over stock b20 power? My crv is my family car and I'm trying to push some good decent power but nothing to absurd. I have a turbo Sentra ser spec v and it's to much for my kid 😅, but he also likes my fast cars haha.
@@andrewloves1993 not really sure, it’s way faster than it was. Not faster than a gsr integra.
@@Donnythelatemodeltech that range sound about right haha, thanks for documenting this whole process, b20 VTEC is awesome
Great video! So awesome ❤😁
Thank you!! 😁
Feels great to make free videos. lol.
What’s better suspension for wanting to keep the car long term lifting it or coil overs?
Stock height good suspension components
Hope to do similar things to my 98 CRV RVI
ive actually messaged you on facebook interested in buying the crv, really cool build, is it perhaps still for sale?
How much for the crv?
what are the specs on those Vs wheels?
Wish has your skills and patience. Luv this car momz had same year. Looking to buy some day.
Ever want to sell it ;) . Really nice work
Hey boss where did you buy your vinyl wrap?
Sponsored by Vvivid.
@@Donnythelatemodeltech how much vinyl wrap did you need how big was the role they sent you... thanks
I wish I was either mechanically inclined or had money
You, or a future version of you are both.
You can be if you try and apply yourself
Mine was urban camo red grey and black 8:20
Dump Clutch Test!! Those are always fun 🤣
They are!
Who are those deom the hologans 10:06
4:05- looks like typical driving in New Jersey....
Why are you selling the CRV?
Cause modified B20s are time bombs, go looks up b20 jointed sleeves😂 you won't be disappointed🤣
❤
I just want to be one of them
U tryin to flip that crv ? 😂
Sold it three month ago.
Cams dauk valve springs and retainers 27:13
How much and where do i get one i nesd one i have gsr one 26:27
Eww Jointed sleeve B20 Weakk!! I Hope it last you longer than the majority😂
CR -V ,1pok sovrimeh klasik 👍👍👍👍👍.xohda⚡. , no akkord 3 ca2 ca4 ca5
I can eye ball them and then i bet people at a shop that its straight for stuff 20:52