I recently saved a one owner 2001 Crv from the crusher. The guy had a radiator crack and parked it for 3 years. I happened to over hear him talking to the parts guy at napa saying he was tired of messing with it. Two days later and 500$ I had it towed to my friends shop after a 60$ radiator and a 50$ tune up she was back on the road. She just crossed 270,000 miles, Craziest part is the fact the original starter and alternator are still on the car. My favorite part was going to the local Honda dealer to get all the service records. The service writer who’s been there forever sold it to the guy back in 2001 it was one of the last cars he sold before switching over to the service department, definitely a cool moment.
A friend and I have done the integra ls head on b20 many times. We always use a b20 head gasket. Theres also been a few times where the valve seat was not damaged from a burned and chipped valve, and we just lapped another one right in. For some reason ls integra heads are resistant to burning those valves compared to b20. After years of dealing with this myself I think its due to the obd2 b20 computers leaning them out a bit too much. Also, not all LS integra heads are the same, although they all do bolt together the same. B18a does not quite flow as well as b18b1, and in 1995-96 ish they changed the casting under the valve cover just a tad.
@@VTECAcademyyup the b20 have tappets go out of adjustment like every 30k miles.. mine had its head rebuilt 3 years ago and a tappet always comes out of adjustment
I remember doing lots of these when I worked at the dealership. The reason this happens is not due to missing a valve adjustment even though doing a valve adjustment would prolong the issue. What we found was the valve seat was recessing into the head causing the the valve to hang open. I remember I had one recessed so bad the screw was flush with the rocker lock nut.
Right at 100K, congrats & well deserved. This video coincidentally enough came about after I asked about thoughts on putting a B18C into a manual Awd crv I got from a buddy. Was told it needed a head gasket. I ended up sourcing a stock B20 head from someone who went B20V in his crx & I plan on putting that on the stock B20 rather than wasting a JDM B18C on a CRV. Thanks for the advice & keep up the good work!!!
How long was this guy driving his crv on 3 cylinders 😂 i quit driving mine as soon as it lost a cylinder because it was using an ungodly amount of fuel
My thought is the crv b20 has more harmonic imbalance, and it basically shakes things loose more than the b18a/b. It doesn't really have anything other than that as a difference between the two because the p75 heads both engines use are identical.
the only difference is in the cams between the b18a/b and b20 p75 head. P8r AFAIK did not come in anything over here in the US. The P8r has larger intake valves (33mm) and a larger cc size (84mm) then a p75 head (81mm)
i think the p8r has 31mm inside valves. i just pulled one off and ran into the issue that the pistons' valve recessions did not clear 33mm valves. all non vtec heads are pretty much the same except the combustion chamber
Yes my 94 teg is running fully build b20b p8r with bc 403 ycp ITR clone Pistons scat rod water meth 😮 automatic jdm sir-g LSD with the matching tcu I'm looking for civic sir-ii LSD automatic it's also running fat-tube toda rep header
What about over heating issues. I can not idle for long without turning on the heater sometimes. Not sure if the fans need replacing or the radiator needs an upgrade. I am leaning upgrade.
Yes, the fans either work, or they don’t. You should be able to observe with her, not there, turning on and turning quickly. If not, you probably have a radiator that is not passing water through quickly enough.
Double check your thermostat/fan switch and clean the connectors out worst case scenario go to a local pick a part and snag some oem fans off another CRV they are pretty robust fans from factory.
I was about to say the same thing sometimes it keeps cool or sometimes it gets hella hot i was gonna do the halfsize radiator and single fan to see if that helps
Hey 👋 So I bought a 2000 Honda CRV. I got it cheap, $800. It’s AWD, 170k miles. The person I bought it off was driving it for about a year with it misfiring. Compression test cylinder (4) has zero compression. I’m leaning on the fence hoping that it only needs a Head. Just wondering how resilient you think these engines are? Think I’ll need a whole new engine or get away with a new/used Head?
Guys can you help me with this I have crank but no start issue, However before that i have recently experience overheat and things shows up since then. It only cranks during cold temp but not during after a long drive. What causes this?
Sir, i do not have any check engine lights on. However, i am suspecting the ect? I am.running my crv with full distilled water, not coolant since my country is a tropical country and they said distilled water is more effective, is this true?
I recently saved a one owner 2001 Crv from the crusher. The guy had a radiator crack and parked it for 3 years. I happened to over hear him talking to the parts guy at napa saying he was tired of messing with it. Two days later and 500$ I had it towed to my friends shop after a 60$ radiator and a 50$ tune up she was back on the road. She just crossed 270,000 miles, Craziest part is the fact the original starter and alternator are still on the car. My favorite part was going to the local Honda dealer to get all the service records. The service writer who’s been there forever sold it to the guy back in 2001 it was one of the last cars he sold before switching over to the service department, definitely a cool moment.
That’s sick
Wow! That is a good save!
A friend and I have done the integra ls head on b20 many times. We always use a b20 head gasket. Theres also been a few times where the valve seat was not damaged from a burned and chipped valve, and we just lapped another one right in. For some reason ls integra heads are resistant to burning those valves compared to b20. After years of dealing with this myself I think its due to the obd2 b20 computers leaning them out a bit too much. Also, not all LS integra heads are the same, although they all do bolt together the same. B18a does not quite flow as well as b18b1, and in 1995-96 ish they changed the casting under the valve cover just a tad.
We saved the head. It may not be damaged.
I've been told the B20 heads have a problem with the valve lash changing. I'm not sure how that is occurring, but that is what I've heard.
@@VTECAcademyyup the b20 have tappets go out of adjustment like every 30k miles.. mine had its head rebuilt 3 years ago and a tappet always comes out of adjustment
I remember doing lots of these when I worked at the dealership. The reason this happens is not due to missing a valve adjustment even though doing a valve adjustment would prolong the issue. What we found was the valve seat was recessing into the head causing the the valve to hang open. I remember I had one recessed so bad the screw was flush with the rocker lock nut.
Right at 100K, congrats & well deserved.
This video coincidentally enough came about after I asked about thoughts on putting a B18C into a manual Awd crv I got from a buddy. Was told it needed a head gasket. I ended up sourcing a stock B20 head from someone who went B20V in his crx & I plan on putting that on the stock B20 rather than wasting a JDM B18C on a CRV. Thanks for the advice & keep up the good work!!!
Awesome! Thank you!
CONGRATS 100K 🎉🎉🎉
Thank you!!!
More crv content would be great!
Agreed.
Kswap, is alot of work in the rd1.
Still worth it.
Watch all the crv videos for clues on when k Awd auto is coming so I can buy it lol
Same
Vtec academy does video on non vtec head swaping a non vtec crv. I still watch video to get schooled. 😂
This one was done out of necessity. 😂 Thanks for watching! We’d much rather be doing VTEC things.
Hold up, I could b18 swap my FWD RD1 CRV and get more hrspr?
B18c
How long was this guy driving his crv on 3 cylinders 😂 i quit driving mine as soon as it lost a cylinder because it was using an ungodly amount of fuel
Just out of curiosity, why do the B20 heads require more frequent valve adjustment intervals?
Also - CONGRATS ON THE 100K! 👏
My thought is the crv b20 has more harmonic imbalance, and it basically shakes things loose more than the b18a/b. It doesn't really have anything other than that as a difference between the two because the p75 heads both engines use are identical.
@@gusplymale1797 That makes sense. Thanks!
I think he’s right. It’s a cam profile thing.
the only difference is in the cams between the b18a/b and b20 p75 head. P8r AFAIK did not come in anything over here in the US. The P8r has larger intake valves (33mm) and a larger cc size (84mm) then a p75 head (81mm)
I Always wanted a P8R head to put some crower 403 cams in
i think the p8r has 31mm inside valves. i just pulled one off and ran into the issue that the pistons' valve recessions did not clear 33mm valves. all non vtec heads are pretty much the same except the combustion chamber
Yes my 94 teg is running fully build b20b p8r with bc 403 ycp ITR clone Pistons scat rod water meth 😮 automatic jdm sir-g LSD with the matching tcu I'm looking for civic sir-ii LSD automatic it's also running fat-tube toda rep header
@@ej1_drew 😅 they're the same valves intake side as b20a second gen prelude gold top bc make em for 3rd gen prelude
And when you do the head work on the p8r air flows better than a built b16
4:53 ~ 👍👏😁😎
What about over heating issues. I can not idle for long without turning on the heater sometimes. Not sure if the fans need replacing or the radiator needs an upgrade. I am leaning upgrade.
Yes, the fans either work, or they don’t. You should be able to observe with her, not there, turning on and turning quickly. If not, you probably have a radiator that is not passing water through quickly enough.
Double check your thermostat/fan switch and clean the connectors out worst case scenario go to a local pick a part and snag some oem fans off another CRV they are pretty robust fans from factory.
I was about to say the same thing sometimes it keeps cool or sometimes it gets hella hot i was gonna do the halfsize radiator and single fan to see if that helps
I just saved a dc4 . Looking for ways to get more power out of it
Hell yeah!
@@VTECAcademy thanks to you guys and OG Brian 🫡
Would you consider making engine mounts so the accord V6 can bolt into the mk2 crv? 😉
At some point I’ll make J mounts for that chassis.
94-01 b20 and b18b heads are all p75 there is no difference other than cams
U need a vtec head.. its vtec academy!
💯
Hey 👋
So I bought a 2000 Honda CRV. I got it cheap, $800. It’s AWD, 170k miles. The person I bought it off was driving it for about a year with it misfiring. Compression test cylinder (4) has zero compression. I’m leaning on the fence hoping that it only needs a Head. Just wondering how resilient you think these engines are? Think I’ll need a whole new engine or get away with a new/used Head?
It needs a head.
Nice video.
How do you run the vtec on an auto ??
I don't have a solution for that yet.
Y’all
Should do my crv it’s a manual. Let’s do this!! Come on
Guys can you help me with this
I have crank but no start issue,
However before that i have recently experience overheat and things shows up since then.
It only cranks during cold temp but not during after a long drive.
What causes this?
This is honda crv gen 1
@@shandatoabantas7727 do you have a check engine light on? If so, what is the code?
Sir, i do not have any check engine lights on. However, i am suspecting the ect?
I am.running my crv with full distilled water, not coolant since my country is a tropical country and they said distilled water is more effective, is this true?
I mean it only cranks and start engine during cold/morning but after a few drive let say going to the store and then it wont start, but it cranks
100k 🎉
Thank you, thank you!
😊good.
Many many thanks
less b series... more j series
All F series
@@VTECAcademyhell yeahhhhhh, the infamous bulletproof F22A1 all day long ♡
Why dont u invest ur time with some AMERICAN MUSCLE, my god man
*comments about muscle on a channel ABOUT Honda and VTEC*
Yeah this ain't the channel for that man
I’m just not interested in that. My brother builds Corvette race cars. I’ll let him do that stuff.
Why troll on a Honda page. Ignorant