Cooler Master MasterLiquid 360L Core ARGB - Installation Guide

Поделиться
HTML-код
  • Опубликовано: 15 янв 2025

Комментарии • 139

  • @cameronStevens-j3o
    @cameronStevens-j3o Год назад +123

    Why is this stressing me out so much, my first build :(

    • @Platinum199
      @Platinum199 11 месяцев назад +6

      how did you go? I’ll be doing my first build in around 7 weeks just getting all the parts slowly and I am nervous as hell

    • @theminecraftnoob9357
      @theminecraftnoob9357 11 месяцев назад

      Mines in about a year lol I'm still getting the parts for it​@@Platinum199

    • @xwNaxs
      @xwNaxs 11 месяцев назад +12

      @@Platinum199 Don’t worry, its easier than you think but at the same time kind of stressful

    • @alexis1000ize
      @alexis1000ize 9 месяцев назад +1

      GL bro

    • @KukuAy
      @KukuAy 9 месяцев назад

      How did it turn out 😲

  • @victorpereira225
    @victorpereira225 Год назад +14

    My unit is a little different (ML360L), it came with its own 6 port ARBG/PWM hub but this was still helpful. Thanks for the guide!

    • @RaulTreviño-c2y
      @RaulTreviño-c2y Год назад

      Hey victor! Are you able to connect the included 6 port controller to the motherboard to control Argb? or that controller can be used just via coolermaster software?

  • @N911GT2
    @N911GT2 Год назад +8

    Thanks. I needed exactly this. First time pc builder. 😅

    • @yelbicen2109
      @yelbicen2109 7 месяцев назад

      Do you have problem with it? How is noise

  • @BradHebert
    @BradHebert 4 месяца назад +10

    5:25 Should mention that it's easy to break the AMD plastic clips on the motherboard when tightening. Be careful - I wasn't twisting that hard when mine broke. Now I have to try to find a new clip and wait on that to arrive.

    • @brandonsapp8337
      @brandonsapp8337 19 дней назад

      I never had that happen but I somehow lost them so I had to order new ones on Amazon

  • @deandevilliers2799
    @deandevilliers2799 5 дней назад

    Incredibly helpful thank you!!

  • @wbbartlett
    @wbbartlett 2 месяца назад +1

    Excellent video. The first two installation search results were two channels pumping out short vids, sped up with annoying music blasting out - no instructions whatsoever.
    So thank you for making a vid that is actually fit for purpose!!

  • @jeremyc3911
    @jeremyc3911 Год назад +2

    Excellent presentation and very clear and concise instructions and video.

    • @jmann2143
      @jmann2143 5 месяцев назад +1

      It's not clear. Why is one socket red and the other 2 black. Does fan placement matter?

  • @atifkhan-ql3dp
    @atifkhan-ql3dp Месяц назад

    I love the way you say aio

  • @mugflub
    @mugflub 2 месяца назад

    fantastic, clear tutorial. Thank you.

  • @DeusLucifer
    @DeusLucifer Год назад +7

    QUESTION 2:05 can someone tell me why the pwm cable the black ones have 3 pins to connect the 3 fans but the red cable has four? so which of the 3 radiator fan get the 4 pin connecter and the other 2 the 3 pin?

    • @Wincow
      @Wincow 5 месяцев назад

      Did you ever figure it out?

    • @DeusLucifer
      @DeusLucifer 5 месяцев назад +1

      ​@Wincow never really figured it out just Chose a random fan to get the 4 pin connector really. Hope this helps

    • @andrecharron3089
      @andrecharron3089 Месяц назад +1

      ​@@DeusLucifer I did the same thing as you

  • @oldkingdoran2778
    @oldkingdoran2778 4 месяца назад +4

    Getting the Intel brackets on is impossible

  • @cyberkruznik
    @cyberkruznik Год назад

    Very good video, really clear

  • @EzekiesAcheron
    @EzekiesAcheron Год назад +12

    The Coolermaster Masterliquid Core doesnt come with instructions so this video is build-saving. Thank you sir.
    EDIT: I WAS WONDERING WHAT THOSE LITTLE CLIPS WERE FOR!!! Its to hold the connectors together! That's so helpful to know!!!

    • @EzekiesAcheron
      @EzekiesAcheron Год назад

      If I could like this video multiple times, I would.

  • @prozakable
    @prozakable Год назад

    thanks man, for real very nice and cirurgic video

  • @facundotavani6824
    @facundotavani6824 10 месяцев назад +3

    Is this water cooling good for ryzen 7800x3d?

    • @kioshiPC
      @kioshiPC 5 месяцев назад

      Yh bro I built my pc a few weeks ago and it doesn’t go below 55°C

  • @andreasdanielsen2253
    @andreasdanielsen2253 7 месяцев назад +4

    My rob header has 4 pins. Is there a solution?

  • @gray3508
    @gray3508 9 месяцев назад +2

    I can only get one side of the mounting bracket in place, the other side screws don't go in, please help

    • @romeroweb
      @romeroweb 6 месяцев назад +2

      Im having the same problem, did you find a solution

  • @vezirimerdo
    @vezirimerdo 11 месяцев назад +1

    I bought this cooler is it good for Ryzen 7 7800x3d?

  • @user-en5gu3dd9j
    @user-en5gu3dd9j 2 месяца назад

    What is your RPM, Fan curve? And what software are you using to control it?

  • @abigbat
    @abigbat Год назад +1

    This helped me so much, thank you!

  • @Siibidis
    @Siibidis 3 месяца назад +1

    6:32 what if i dont have 2 cpu fan and i have cpu fan and cpu opt??

  • @klemenskofic8458
    @klemenskofic8458 Год назад +1

    Rgb is not working for me. What have I done wrong? Plugged it straight into motherboard as shown on video. MSI z690 tomahawk. Thanks

    • @GGGEZ1
      @GGGEZ1 Год назад

      me 2 not working i dont know why !!

    • @klemenskofic8458
      @klemenskofic8458 Год назад

      @@GGGEZ1 motherboard has on/off switch for rainbow rgb

    • @GGGEZ1
      @GGGEZ1 Год назад

      @@klemenskofic8458 They all work except the radiator rgb! Is there something in bios !! Please explain, I am a beginner in these matters

  • @Prodigy-Christos
    @Prodigy-Christos Месяц назад

    What if you don’t have a aio pump

  • @nimbarkhirenkumar1226
    @nimbarkhirenkumar1226 Год назад

    Which case?
    The video is simple and superb. Very very good and clear.

  • @Conraderien
    @Conraderien 5 месяцев назад +1

    I installed mine with the tubes on the right , I don't know if it matter that much

    • @sampowell4311
      @sampowell4311 Месяц назад

      Did ur cpu temps stay good and work well? Im about to build using this and am interested in whether it will work

    • @Conraderien
      @Conraderien Месяц назад

      @sampowell4311 I mean the temps were fine but I ended up installing it back on the good side

    • @sampowell4311
      @sampowell4311 Месяц назад

      @ was there any issue that made you do that as i would really rather install it the way you had it?

    • @Conraderien
      @Conraderien Месяц назад +1

      @@sampowell4311 no i didn't had any issue i just wanted to install it the good way

  • @e281tangy
    @e281tangy 6 месяцев назад

    what electric screwdriver are you using?

  • @rarebit4430
    @rarebit4430 11 месяцев назад

    Why does no1 show a ryzen video with this cooler?

  • @darkodjuric6997
    @darkodjuric6997 Месяц назад

    Is this better than arctic liquid freezer 3 ?

  • @Bdadd1225
    @Bdadd1225 Год назад +1

    I can’t get the lighting to work, I had to purchase a conversion cable because my asus prime z270 mobo does not have a slot for that strange 3 pin daisy chain to plug into. I’ve plugged it in the rgb header slot and I’m not getting any lights and armory crate isn’t recognizing it for lighting

  • @david123-brawlstarsdeutsch3
    @david123-brawlstarsdeutsch3 Год назад

    Does it also work with LGA1151?

  • @HNWILL
    @HNWILL 2 месяца назад

    does this come with all brackets for amd?

  • @Solus0091
    @Solus0091 Год назад +1

    Hi - just to be sure: the header from the CPU cooler needs to be connected to the “Pump_Fan. Instead the the header 3-1 from the 3 fan needs to be inserted into the “CPU fan”. Is that correct? Thanks 🙏

  • @comoprotegertede
    @comoprotegertede 2 месяца назад

    Thank you for this guide! It was helpful for me.

  • @kasunbhashana
    @kasunbhashana 2 месяца назад

    Can you please tell me what is the name in the item you use prevent ARGB cable accidentally unplug

  • @godfirst0nly300
    @godfirst0nly300 7 месяцев назад

    What if you don’t have a top panel? Where would I install it?

  • @XxDarkoviathxX
    @XxDarkoviathxX 27 дней назад

    so i was wondering i have the phantex d30 fans can i swap them from the stock fans?

  • @Luk_32
    @Luk_32 Год назад

    I had the stock amd cooler but now it doesnt have a bracket it doe have the back thing but do i need to buy new brackets??

  • @atta1798
    @atta1798 Год назад

    . I got 360 ATMOS and it has no logo on the radiator sides etc

  • @chriz9959
    @chriz9959 11 месяцев назад

    do you need to refill the water once in a while?

    • @Ffdjsjjdbrd
      @Ffdjsjjdbrd 10 месяцев назад +1

      No you don’t have to refill

  • @Orcagirl0809
    @Orcagirl0809 Год назад

    Christopher where does the end of the five to one cable plug in?

    • @Bdadd1225
      @Bdadd1225 Год назад

      Apparently on the hub or mobo, my board doesn’t have that particular pin pattern and I’m stuck without lighting. Idk what to do. Already bought conversion cables but it’s not working

  • @buddikamaduranga6758
    @buddikamaduranga6758 6 месяцев назад

    Sir what is the best casing 360L liquid cooler to install

  • @DaLastSaiyan
    @DaLastSaiyan Год назад

    Should I be using this with the cooler master HAF EVO 700?

  • @tazerface4202
    @tazerface4202 10 месяцев назад

    you dont need to add water anywhere?

  • @kertiszman
    @kertiszman Год назад

    I am new at this. Sooooo this maybe a dumb question but where is the liquid and do you need to install it?

    • @ghoste5776
      @ghoste5776 Год назад

      It’s already in the radiator

  • @mrduke34
    @mrduke34 Год назад +2

    will it cover entire cpu? i mean it looks like cpu is more bigger

  • @ColdDac_Adventures
    @ColdDac_Adventures 6 месяцев назад

    It does rotate you just have to turn it hard and then it has clips inside for 4 different positions

  • @Preece93
    @Preece93 10 месяцев назад

    Do you have to use the master cooler fans?

    • @christopherweir9419
      @christopherweir9419 9 месяцев назад

      given your buying a Cooler Master AIO I'd say...yes.

  • @MinisterxV4
    @MinisterxV4 4 месяца назад

    I need help asap. Not sure what’s going on but my cooler is not sitting flat on CPU. Any recommendations? There’s a gap in between and I’m not sure what I have to do. It fits on on both AMD brackets, I start to tighten then there’s just a gap

  • @str1c7
    @str1c7 5 месяцев назад

    Stupid question but are screws included with the cooler?

  • @joonkim1289
    @joonkim1289 Месяц назад

    i installed the radiator fan the same way as this video. But wondering is the fan from the radiator suppose to blow the air down or up?

  • @iClownXD
    @iClownXD Год назад

    it is ok if Aio tubes are touching the gpu backplate?

  • @masoncrosby534
    @masoncrosby534 Год назад

    I do not have a pump header so where should i put the pump cable?

    • @cx6847
      @cx6847 11 месяцев назад

      On my old desktop I plugged mine into FAN1...its 9 years old and still running...

  • @cx6847
    @cx6847 11 месяцев назад

    I smear a thin layer of compound with a brush on both the cpu and the coldplate's full surface...

  • @watersekirei5035
    @watersekirei5035 6 месяцев назад

    One question please, if I don't want any RGB LED (maybe use it later), can I NOT connect any RGB PIN?

  • @standbymode7599
    @standbymode7599 Год назад

    what model fans are on the master cooler 360l aio??

  • @Lukeyd19
    @Lukeyd19 6 месяцев назад

    My motherboard don’t have a pump header🙈

  • @wmbeverything2796
    @wmbeverything2796 6 месяцев назад

    how to change rgb color

  • @ryanradz1
    @ryanradz1 3 месяца назад

    Hmmm. Mine came with a connector box not those cables.. it is v2. But the lights on the cpu and radiator fans flash for a second then turn off. 5 seconds later they flash again then turn off :/ .. the clear box connector is connected to cpu fan and the rgb to rgb on mb. It's saying the pump has rpm in bios

  • @alexhenseler4876
    @alexhenseler4876 9 месяцев назад

    Mine makes noise .. idk how to fix it

  • @silvii_9755
    @silvii_9755 9 месяцев назад

    Where can i buy this argb hub? My motherboard don't have argb header and i can't find something like this :(

  • @stuntdiver86
    @stuntdiver86 Год назад

    Can you purchase the rgb clips that hold the cables together separately?

  • @aasimmohammmad9129
    @aasimmohammmad9129 Год назад +1

    Which fan are on this aio?

  • @lucasvaz548
    @lucasvaz548 Год назад

    how do i turn on the fan led on an asus tuff b450m pro II, it doesn't have a 3 pin 5v connector?

  • @fabienpath
    @fabienpath Год назад

    I just wanted to know if I had to buy extra thermal paste or it does come with it

  • @sd1rager
    @sd1rager Год назад

    are you sure the head doesn't rotate. cooler master has a picture on their site that shows the logo upside down but the tubes still exiting by the ram. i hoping it does rotate bc i run 4 ram sticks and don't want to risk clearance.

    • @KILLzone_565
      @KILLzone_565 Год назад +1

      I just bought it. You can remove the cover and rotate it.

  • @Batjarus223
    @Batjarus223 Месяц назад +1

    If I have 1 CPU Fan header, Where else do I connect them?
    My CPU Cooler: Cooler Master MasterLiquid 360L Chun-Li
    My Motherboard: ASUS PRIME B760M-R D4

    • @FriedOnionsYT
      @FriedOnionsYT Месяц назад

      Same I think there is one above the gpu to the bottom left of the cou

    • @FriedOnionsYT
      @FriedOnionsYT Месяц назад

      Cpu*

  • @rikatoathena7018
    @rikatoathena7018 Год назад +1

    Mantap🤩👍

  • @keekee2880
    @keekee2880 Год назад +1

    5:42
    is it still fine to mount it in a way that the logo is upside down? So if the tubes were on the right?

    • @doughboi007
      @doughboi007 10 месяцев назад +3

      Yes. It's not going to change anything.

  • @jaguar75
    @jaguar75 Год назад

    My cpu runs at 100c under any load can you help me pls

    • @christopherweir9419
      @christopherweir9419 9 месяцев назад

      take the cooler off and check that you have mounted it correctly to the CPU.

  • @nicodeig8481
    @nicodeig8481 Год назад

    im just giving up now i dont get it im trying it for 4h now 😢

  • @KhKh-wy8fi
    @KhKh-wy8fi Год назад +2

    How to refill water?

  • @topvadeboy
    @topvadeboy Год назад +1

    6:10

  • @christ0ph3rson70
    @christ0ph3rson70 Год назад

    Just bought one for my amd Ryzen 7 7800x3d

  • @Geniusinside2023
    @Geniusinside2023 Год назад +1

    I just bought this thing, I love it. Super think radiator and very powerful pump. The only thing i can't understand why i can't control the rgb? lol, And yes as from experience it's the biggest cooler surface cooling wise, It's massive and will cover a whole cpu, i have i7-12700K, Under stress testing it will never go over 65

    • @anonymousx6651
      @anonymousx6651 Год назад +1

      RGB can be controlled through RGB Software, if you connect the ARGB cables to ARGB ports on the motherboard. I personally have them connected to an RGB controller connected to my case

    • @FearlessFrog
      @FearlessFrog 11 месяцев назад +1

      @@anonymousx6651 Hmmm, I have the exact issue. The tech guy who prepared my case did this I think. Because there is a botton on the top of the case to change the lights and all case fan lights, pump light and the fans of the cooler (3) lights simultaneously. I can change the sync or the type of the light via this button. But never succeded changing from mystic light. Am I correct?

    • @anonymousx6651
      @anonymousx6651 11 месяцев назад

      @@FearlessFrog Yep, you can connect the controller (probably in the back of the case) to your motherboard and it will act as just a hub that you can control through mystic light or other RGB software

    • @FearlessFrog
      @FearlessFrog 11 месяцев назад +1

      @@anonymousx6651 Thank you for your clear answer. I got it. But most probably I will continue by the hardware of the case, not from the motherboard :)

    • @yelbicen2109
      @yelbicen2109 7 месяцев назад

      ​@@anonymousx6651Do you use thos model? What do you think about it ? Is it to loud?

  • @jameshill6846
    @jameshill6846 Год назад

    How long are the pipes

  • @FrequencyOfThought
    @FrequencyOfThought 10 месяцев назад

    running 13900K it runs worse than my 240MM Deepcool. Beware, sending it back to shlamazon, ended up getting the Deepcool 720 I'ts only 20 bucks more

  • @druout1944
    @druout1944 Год назад

    what a horrible design; I should have gone with EVGA or Corsair; requiring a seperate RGB controller is maximum jackass when EVGA, Corsiar, and NZXT 360mm can do the lighting without that.

  • @pixette
    @pixette Месяц назад

    ruclips.net/user/shortsBYAhcuy7pRo?feature=shared

  • @Tumppiyk
    @Tumppiyk 26 дней назад

    Most horrible guide ever dont do these again

  • @samkh3306
    @samkh3306 9 месяцев назад

    why do you mumble in between, its so hard to understand, even subtiltes are showing *********** when you mumble. Speak clearly or dont make videos

  • @valtress96
    @valtress96 3 месяца назад

    Can i plug this triple splitter into my fans splitter and not the motherboard ? I only have on cpu fan header in my awful motherboard