FX IMPACT MKII Hybrid slug tune
HTML-код
- Опубликовано: 6 сен 2024
- In this video i am showing how i tuned my FX Impact MKII to shoot the FX Hybride slugs in 25 cal at 965 FPS
Music credits :
Heartfül of Kerøsene - Jeff II • Jeff The Second - Waves
Creative Commons Attribution
Free Download / Stream: bit.ly/al-hear...
Music promoted by Audio Library • Heartfül of Kerøsene (...
Bustin Loose by Audionautix audionautix.com
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_bustin...
Music promoted by Audio Library • Bustin Loose - Audiona...
This is probably the easiest tuning video I have ever seen nice !
Thx
Superb work. Very impressive consistency and great velocity stability. Thanks for sharing
this guy is one of the best
Thx 🙏🏻
Best video I seen In ages thanks a lot
Thx 🙏🏻
Only just started watching your channel. I don't normally comment on videos but yours deserves some credit.Best explained tutorial of the tuning process for people to understand to find the balance point.
Hi mate, really appreciate you taking the time and giving this nice compliment 👍🏻 such support is what I do it for and keeps me motivated to bring more content!
Nice video, easy to follow instruction manual for us wanna be tuners 👍🏻
Glad it can help 👊
Nice job. This helped me greatly in setting my Impact mk2.
Thx , glad it could help
Excellent video - thank you!!
Love the "tallking hands" technique! and top tip about the Huma High Flow TP - I've just ordered one of those.
Thx 🙏🏻 the Huma tp is a great item
Fantastic Video!!!! Thank you.
Thx 🙏🏻
Awesome video. Can’t wait for your accuracy tuning video. You make so much sense in how you explain. I’m a new impact owner love to tinker. But this makes total sense in how the balance works.
I am working on the harmonic tuning video , but it’s quite simple compared to this video . Once you managed to tune your impact like in my video it’s a matter of going out and shoot some groups at different power settings and see what groups best 👍😉
Airbuks Thanks a lot for the info. Looking forward to your video. Keep the videos coming.
Good job
You are the Best mate..
Thx 🙏🏻 I appreciate the support
Can you make video how to tune MK2 .30. FX impact please
Great video
Maybe later . At the moment I have my mkii in the ultra compact configuration
Tedious and expensive tuning for slugs...still good video on how its done!
Thx
Thanks for the tips very helpful thanks for sharing buddy bsafe
Your welcome, stay safe aswel
I really enjoying your video's☺️
My dream FX impact MK2😍
Love from Philippines ❤️
Looking forward to the harmonic tune for the accuracy too. Again. Thanks. This was the best simple, crisp and concise video.
I am editing already a part of the video , just need to record a accuracy at 100m , but I have to find a 100m stretch 😬
Could you kindly inform me if a 600mm 580cc combo on an Impact would have the clearance for the fitting of a Tatsu, ie would there be enough clearance between barrel and bottle.
Where FX to sell the Impact in this configuration, It would convince me to buy.
many thanks for this video, subscribed.
I am using the 600mm barrel /580cc with a Donny FL sumo 👍 I don’t have a tatsu ( yet )
Awesome video 👍
Really enjoying your videos. Cheers.👍
Thx 🙏🏻
Good video sir- no BS approach to tuning. Thanks
Thx 🙏🏻
Low reg high velocity...good job
Thx 👍🏻
Hi, quick question, how do you know when your hammer spring is maxed out? You screw in all the way? Thanks!!
In theorie when your gun doesn’t cock anymore but would advise that .
Then you better install heavier spring and hammer
Yes, I have to agree with RazThe Ripper. Very good tune video, most other Guys get too complicated because they are trying to "Big Deal" you! You present only the information that is necessary and in a easy to understand format. Great Video! : )
Thx for the support 🙏🏻
Very good
great info in this seris on tuning the fx impact ... i have watched it several times and keep getting info ... all the details are. very helpfu ... thanks for all your hard work
Your welcome, thx for taking the time to comment and support 👍🏻
Wait to see accuracy video.
Working on it 👍
Hello my friend, this rifle is too beautiful, and must be very good in power and precision ,,, great video ,,, save here from Brazil
So turing that screw in the Hammer Spring is YET another way to adjust the speed apart from the wheel setting itself ? am a bit confused.
Not really the screw inside the power wheel can be adjusted to determine the amount off tension on the hammerspring
@@Airbuks Thanks for the reply! so this is also the reason why sometimes the wheel gets very hard to turn / cocking becomes difficult.
Reinaldo Abad Santos be careful with winding it up to much and never try to turn the wheel went the gun is cocked!!!
This will damage the impact
Nice video!
And a nice tune!
Thx 🙏🏻
Awesome job on this tuning video. This Helps a LOT. Thanks
Your welcome
Well explained great video ! 👍👍
Thx 🙏🏻
Olá meu amigo sou do Brasil e gostei muito das sua dicas, esso metodo tambem pode ser usado para o calibre .22 ? obrigado.
oi, que bom que você gostou do vídeo Você pode usar exatamente o mesmo método para o 22 cal
@@Airbuks Muito obrigado amigo, eu me inscrevi em seu canal e estou acompanhando seus vídeos , obrigado por compartilhar seus conhecimentos, abraço!!!
I think fx air rifle this is the best but too much expensive
Hi buddy do you swap the hammerspring for the 57mm???
No it just stock from factory
Hi there. Great videos. I was reviewing some of your previous videos and have just noticed that the Spuhr mount is now a QDP model. When you introduced to us this mount it didn’t have the Quick Detach feature. Did you replaced them or is it an upgrade over your first model? Thank you very much.
🤔 you have a good eye for detail 👍 . In order to get the Nexus scope I had to sell my Athlon scope and Spuhr mount to get the funds . It was sad to let that mount go but I had to if I wanted the nexus . Later on i had a opportunity I couldn’t let go and so I had another one (funny how things happen sometimes 🤔) Super happy with it .
i love your videos
Thx
I was asking cuz I think I had to much hst and it was causing efficiency problems so I put my gun back to factory settings and this weekend I will tune it for the 34 jsb at around 890 900 fps around there I find them very accurate out of my impact mk2 25 cal thanks again this v6help me out alot
Great video! Will you review the Leshiy 2 on your channel?
🤔 maybe if I can find some spare change 😉
great video.
Thx
Why did you buy the impact compact if you have put a longer barrel and bigger air bottle on it?, why not just but the impact?
Hi, I still switch between the barrel length and bottles.
For the moment the 300cc tank went to my Dreamline and to experiment with slugs on the impact I wanted a little longer barrel and a bit more air .
Soon I want to convert it to a double 300cc bottle with 500mm barrel 😉 .
That’s the beauty of these guns , you can mix and match as much as you want and build the gun that suits you at that time
Struggling with my tune. If I max out hammer spring and valve on line four to my target speed and then start to lower hammer spring and valve screw I drop too much fps. I also tried the other way of starting hammer tension low and increasing until you reach 15-20fps faster than target speed and then try and decrease the valve screw to lower fps but when I lower to around line 3 my FPS only drops around 5 fps. I’m lost!
Hi mate , what’s your regulator pressure?
Is the rest of the impact stock ? No other changes?
You try to shoot slugs ?
@@Airbuks everything is stock. I’ve tried reg at 110 and 120. It’s 22 caliber. And trying to shoot 23 grain slugs.
@@arubino19 if you want to shoot slugs I would go up in regulator pressure to about 135-140
Thanks for the effort. Keep up with the good work 👏🏼👏🏼👏🏼
Thx !
So impressive, really helpful and thank you for your video. That's help us a lot.
Glad it helps , it gives the motivation to keep making videos 👍
Great video. Could you do a similar one for FX Crown. It'd be great
I wish but I don’t own a crown , I would like to 😉
Nice
Hi. Nice video. Out of curiosity what was the final measured distance of the H/S. you mention the initial measurements. Not sure if I missed the tuned measurements?
You didn’t miss it , I didn’t include it because at the end it isn’t something you can copy from one gun to the other . It’s all about the balance between the 3 settings if one is slightly different you need a different HS load . But if you want for reference I ended up at 18,85 mm
That’s great thanks. More just curiosity. Great vid. Looking forward to the accuracy / results video!!👍👍
I will try to film it next weekend
Bom video
I have my .25 maxed out hammer and valve set at 4 and I turned my regulator to 95 bar and I get 891FPS then do the step to change the power wheel to see when the FPS drops. Power 5 888fps then power 4 884fps and then power 3 877fps I saw the drop. I’m kind of stuck on what I should be doing?
I would go higher on the regulator ( 120bar ) put the valve around 2-2.5 and you will see that the hammerspring wheel will give you bigger steps .
With that low regulator pressure and the hammerspring on max you are overpowering the valve
@@Airbuks I will give it a shot. Thank you for getting back to me (:
@@Vincent-xp2ir alway welcome , let me know how it went
Hey its really great video. Today i try to tune my fx impact mk2 with 700mm stx barrel exactly like u say. İ made my hammer spring to max and open the valve 4 and set the reg at 85. İ want to shoot jsb 33.95 around 860fps. When i try with this tune i get 870fps. İ was waiting less actually. And when i get high i start to take down my hammer tansion till i get 865 fps. After that i close slowly my valve till i get still 865fps. Till here everything is fine but my result are like that
Max 865fps
5 : 854
4: 849
3: 814
2:805
1:805
Min:810
İ didint understand why its like that and i was hoping for jsb 25,39 get like 890 fps with same tune. But with same tune when i just change tu hummer to min i get 920fps. Pls help me where i did wrong.
I am not sure if I understand your explanation.
But first question: did you install a slug power kit , Huma transferport etc ?
@@Airbuks sorry for my bad english. no i have 700mm stx pellet barrel so i am trying to tune for jsb 33,95 and jsb 25.39 and hoping i can get with same tune just change the hummer for example max to min get 890 fps for jsb 25gr and 860 fps for jsb 34gr. İ think my reg is too low but still fps is higher than what i want. And i am afraid if i raise my reg. The fps also will raise i dont know what to do. Thanks for helping.
@@artofairgun yes that’s my best guess as well, to low on the regulator with to much hammerspring tension .
Don’t go any lower in the regulator or you will blow the oring off the plenum at the back .
If you look at your power levels you can see that your velocity goes up again at min . That’s a signs you have to much hammerspring for that given regulator pressure. So start by reducing the hammerspring tension on max until you have a little bit of play in the adjustment block and see , then I would increase the reg to about 100bar and play with the valve to get it consistent . Good luck and keep me posted
@@Airbuks thanks a lot 🙏🏻 now i understand why when go down to hammer fps is getting high. When i raise the reg all is fine now. For 25,39 i am gettin at max 1020 and at low 890. And for 33,95 at max its like 900fps.i just want to ask last question. Now my reg is at 120bar. And valve at 2,5 line. And hammer at max dont move like ur video. The question is if i go down to reg and also down to hammerspring tansion can i get same fps and save much air ? İs 120bar too much for 25cal or not ? Thanks a lot
@@artofairgun that depends on what other modifications you have , slug power kit , Huma transferport...
with those mods and a 700 mm you should be able to drop the reg 10 to 15 bar and Hs also offcours
When doing this, do you try to keep the reg pressure as low as possible to achieve the speed you want?
In the early days ( when I made this video ) I was always trying to keep the regulator as low as possible to maximize the efficiency. But recently i find better accuracy at higher regulator pressures when shooting slugs .
For pellets I still use a low regulator pressure
@@Airbuks high pressure with the hammer a little lower?
@@nealeash1445 yes indeed, short burst of high pressure air is preferable for slugs
Can you tell me why you ordered a compact fx impact then change barrel and bottle that's the only difference between the two you mite aswel have just bought a normal impact great video though
Haha good question, I also own a Dreamline tac compact and wanted a 300 cc tank for it but they where hard to get but came standard on impact compact. I already owned a 580cc for the Dreamline so I swapped between them , I also have different barrels to switch between them .
That’s the nice thing about FX , you can mix and match different items in different guns 😉👍
What reg pressure do you use now for slugs 150 or ?
At the moment 155bar for 34gr 22cal slugs
I recently change caliber from a .30 to .22 and for some reason I can't pass 950fps with 34 grain javelins. I have the huma dual transfer port and high flow probe. With the .30 cal 140bar bring me close to 1000fps with 44.75 grains, I don't understand how with a lighter projectile it can't reach the 950fps@@Airbuks
Very simple and that is because the barrel diameter from .22 is a lot smaller then the .30
Thank you - great video!
Liked and subscribed.
I have MKII in .22 cal 600mm on order, and this may be an obvious question but I’m not 100% clear on it: if I fit a Huma HF transfer port and probe kit, would you expect me to get similar performance with the 22gr FX hybrid slug from the same settings as you’re showing for the .25? Or as it’s a lighter projectile would it require less energy/pressure/air etc to attain the same speed?
I know I’ll find out when I test it... but guess I’m getting impatient! 😊
Hi , thx for the support!
You can shoot the 22grain .22 easily with less power then you need to push a 26 grain .25
@@Airbuks I just put a huma port and probe in mine and it woke the gun up. 110 reg,, hammer spring set to not quiet max, at 960fps hyb 22 slugs,, out of 700mm with power plenum,, superior1 liner.... initially I installed it with stock settings and shot it in back yard and it cracked the sound barrier, very loud. had to retune the gun dramatically.
@@bear5cents 😂😂 well done 👍
Can you tune Benjamin bulldog ?!! 😃😃
I don’t have one 🤷♂️
could you tell me what butt pad is fitted ?
Saber tactical 👌🏻
where did you get you 500 .25 barrel
I bought a impact compact 😉
And the accuracy mine groups the best at 942fps
Thx for the info , I will check that in mine as well
👌✌️how about a fx impact mk2 .30cal tune brother
Soon , when I convert my Maverick the barrel will go to the impact 👍🏻
@@Airbuks fun of your videos number one brother
@@adolphoaguilar9546 thx mate !
Which rifle do you like better the impact or dreamline
Difficult question , simple answer 😉
Different guns both have a different purpose for me . So I can’t choose between them .
The impact is simply bad ass and for me a bench gun and slug shooter a powerhouse!
The Dreamline is awesome for the possibility of changing things around , in the compact version it’s a fantastic lightweight pesting and plinking tool
I love both and when you get the stock for the dreamline there really in not much in the price
❤❤🕊👍
In term off velocity, its good guidance, but after you get the desire velocity, how about the grouping? On 50 meter and above? Is it as good as on previous setting?
The harmonic testing wil be done this weekend 😉👍 that’s why I set it to 965fps so I can drop the velocity a bit to find the perfect FPS for accuracy
What are your final measurements
I don’t know exactly anymore 😬 I have tuned it now to shoot javelin slugs
@@Airbuks awesome sounds like a good idea man
Hello excellent video, well explained, see: did you make any modifications to the rifle?
Did you modify the transfer port? the hammer spring? the pellet probe?
Thx 🙏🏻 The only thing is a Huma air dual hole transfer port and matching probe
Bs
How to order india
I don’t know 🤷♂️ I am just a user not a shop . Try to look for a FX airguns dealer in India
eBay 👀
For the fine tune you only need the new next level silencers
ruclips.net/video/71f0masJh-o/видео.html
Terrific work, thanks a lot! this really helps to guide a novice in the tuning process. As far as I' m concerned though, less music is fine too. What is that Buttplate, by the way ??
Thx for the support 👍 . Some like the music and some don’t 🤷♂️ so I make some with and some without 😉. The buttstock is from saber tactical, you can find a video about it on my channel 😉
đẹp quá
You would think that FX would do all this, then all customers would have to do is follow their guidelines for different pellets, slugs and liners.
I know each rifle isn’t blueprinted but getting in the ball park of say 5-15 FPS would be ok. It would save money, time and frustration.
I like the Yanks approach, turn everything up to max and shoot at 300 yards🤣
I also like the Yank approach 😉 my impact preformed already pretty good out of the box but after a few 100 shots the regulator settled and gave me similar consistency. But as with any super car with some fine adjustments it can preform even better 👍
How much sir
I am not a shop sorry , you should contact your local FX dealer for pricing
How much does it cost?
I am not a shop , sorry 🤷♂️
@@Airbuks Thank you very much.
I'll trade you my 600mm for your 500mm. I just purchase the barrel from UA. I am on AGN for reference all positive reviews.
Sorry mate , I am keeping both . I have plans for the 500mm 😉
To mouch work for a $2000 gun forget that now I know what not to buy
Glad I could help 👍
All FX guns shoot pellet on pellet at 50 yards easily out of the box. He’s just tweaking it for certain ammunition,FPS. I have 2 fox guns. They are incredibly accurate
Order Việt Nam.
Why didn’t you include the final measurements at the end. To make it easier. And cost affective. For those of us watching. It all added subtracted then added to a confusion. That. Gets you views. Well I won’t play your. Game. And all of you. On his. Tip. That are going to. Attack me. I hope he eats. A huge plate of asparagus. Have ave decent yet gloomy with hot and sunny. With hail then alittle bit of humidity. Today.
Hi mate, I don’t try to be confusing 🤷♂️ this video is a follow up of a previous video that includes measurements . I am not trying to get views true misleading my followers. Views is not my main objective but trying to help others is the goal for me 😉
Hi! How is the accuracy og the hybrids at 100 yards with that speed?
I don’t have the space to shoot at 100 😬🙈
@@Airbuks I will still watch your videos though :)