To get the maps to load I did a couple things I turned everything off inside and left the iPad on the internet connection to let the maps load. I also took it outside and set it on the ground let the GPS mode load and leave it sitting there for another 10 minutes and the map seem to update.
would love to be able to yaw the copter while it's doing automated way points so you can film what you want to instead of just where the copter is pointing. Maybe we'll see that next?
Thanks Drone Camps,great walk through and also very helpful. Just getting to grips with my Phantom + and its great fun. Thanks again. Sincerely JF ( UK ) ps You have a new sub :)
Bob, What do I have to buy to be able to do this? I currently have the DJI Phantom 2 with latest go-pro and h3-3d gimbal. I need an iPad I know that much, but do I need wi-fi extenders etc? could u recommend a setup
Hi, is there a feature to set waypoints and to have the camera/drone pointing/facing at a certain waypoint. So have the drone panning around pointing at a fixed location? Thank
Graham Foster Right now you can't do that, but you can take photos and video along the route. The feature you are looking for is called POI. Point of interest.
I have ground station on my iPad 4... I cannot get passed the "cannot locate Aircraft" i have been in "settings" and made sure the wifi is set on the Phanton. any suggestions?
hey quick question. do you know if the ipad ground station app allows you to set a focal point and have the phantom fly its waypoints while aimed at the "target"? so like if i set a spiral around something starting low and increasing altitude instead of flying with camera straight on it looks at the target while it does its thing? make sense?
hello Need some advice I own a DJI phantom 2 Vision Plus drone but no able to use the Ground station app in DJI Vision apps using my Iphone I do th compass calibration but the problem is my Present location on the Map not seem correct position it been offset a little far from my present location I set my Dynamic Home point enable i have 11 GPS satellite receive, but still the present location is offset far to my present location ,what seem to be the problem i do not know so I am afraid to use the waypoint feature because afraid my Drone will land on different location as seen on my map in my ground station which is a little far from my present location may you can give me some advice how to do with this
How do I download the assistant software fro the Phantom 2 Vision+? I have tried to download it from the DJI website but the file on there was incorrect. It gave me the Phantom 2 Vision assistant software instead.
See the full features of the iPad ground station here... This version was the first version made. The Vision version is a small version of this one... www.dji.com/product/ipad-ground-station
Drone Camps, I know I need to disconnect my iPad from the Phantom and with cellular enabled, go outside to download maps for the SF Bay area, but where online do I go to do that? And how do download them? Thanks!
Ed Murphy you download the maps right in the app. Connect to your household wifi. Open the app. Swipe left to get into Waypoints part of the app. Then let the google maps download via your house wifi. Don't fly outside until you see the maps loaded for your area you intend to fly from.
Ed Murphy OK, I see now that it's the DJI Vision app. I turned on Camera but it keeps telling me to connect to Phantom, which has been delayed arriving due to east coast storm...
I think you have to disconnect from the Phantom Wi-Fi and use your phone connection to download the maps and once you have them connect to your Phantom.
Why are the way points coded so strict? I want to be able to go through way points and not stop .... Ground station app for iPad has way nicer way point control and really I don't think that it would be that much more complicated to have for iPhone android DJI vision app ....
I picked up that Killer RC gimbel protector. you reviewed great product. yes i did use locktite lol. Keep up your great videos. I learned a lot.
Robert Luber thank you. - Justin Davis
To get the maps to load I did a couple things I turned everything off inside and left the iPad on the internet connection to let the maps load. I also took it outside and set it on the ground let the GPS mode load and leave it sitting there for another 10 minutes and the map seem to update.
Thanks for the help on loading maps and this tutorial
Your welcome guys!
would love to be able to yaw the copter while it's doing automated way points so you can film what you want to instead of just where the copter is pointing. Maybe we'll see that next?
Thanks Drone Camps,great walk through and also very helpful.
Just getting to grips with my Phantom + and its great fun.
Thanks again.
Sincerely
JF ( UK )
ps
You have a new sub :)
Thanks for the video. Very helpful.
Your welcome Bazza.
Bob,
What do I have to buy to be able to do this? I currently have the DJI Phantom 2 with latest go-pro and h3-3d gimbal. I need an iPad I know that much, but do I need wi-fi extenders etc? could u recommend a setup
Nicholas, you would need the DJI iPad Ground Station Kit. www.dronecamps.com/#!product/prd17/1853198405/dji---ground-station-for-ipad-package
Hi, is there a feature to set waypoints and to have the camera/drone pointing/facing at a certain waypoint.
So have the drone panning around pointing at a fixed location?
Thank
Graham Foster Right now you can't do that, but you can take photos and video along the route. The feature you are looking for is called POI. Point of interest.
Ok, thanks for your reply.
Hopefully there will be an update for it soon.
I don't see the dji app, the one shown in this video, on the ipad app store? Is it only available for the iphone? Thanks!
Don Fotsch, If you select iPhone only when your in the App Store on your iPad it will then show the DJI VISION app.
I have ground station on my iPad 4... I cannot get passed the "cannot locate Aircraft"
i have been in "settings" and made sure the wifi is set on the Phanton.
any suggestions?
hey quick question. do you know if the ipad ground station app allows you to set a focal point and have the phantom fly its waypoints while aimed at the "target"? so like if i set a spiral around something starting low and increasing altitude instead of flying with camera straight on it looks at the target while it does its thing? make sense?
Not Set GPS Mode. Help me. I'm use DJI Phantom 2Version +
How do I delete the pics and vids that I have downloaded onto my note2 smartphone? Great vid. Thanks
You would delete the pics on your note2.
hello Need some advice I own a DJI phantom 2 Vision Plus drone but no able to use the Ground station app in DJI Vision apps using my Iphone I do th compass calibration but the problem is my Present location on the Map not seem correct position it been offset a little far from my present location I set my Dynamic Home point enable i have 11 GPS satellite receive, but still the present location is offset far to my present location ,what seem to be the problem i do not know so I am afraid to use the waypoint feature because afraid my Drone will land on different location as seen on my map in my ground station which is a little far from my present location may you can give me some advice how to do with this
How do I download the assistant software fro the Phantom 2 Vision+? I have tried to download it from the DJI website but the file on there was incorrect. It gave me the Phantom 2 Vision assistant software instead.
Thanks guys, I can't seem to get this app onto my iPad just the phone, how did you do it?
To get this app on your iPad. Go into the App store / search iPhone Only. then type in: DJI VISION.
@ drone camps rc, you mentioned that it is missing some features, what are the missing features?
See the full features of the iPad ground station here... This version was the first version made. The Vision version is a small version of this one... www.dji.com/product/ipad-ground-station
Drone Camps, I know I need to disconnect my iPad from the Phantom and with cellular enabled, go outside to download maps for the SF Bay area, but where online do I go to do that? And how do download them? Thanks!
Ed Murphy you download the maps right in the app. Connect to your household wifi. Open the app. Swipe left to get into Waypoints part of the app. Then let the google maps download via your house wifi. Don't fly outside until you see the maps loaded for your area you intend to fly from.
Drone Camps RC Hi JD. You mean the GS app? I see my area in the maps as it sways back and forth, but not sure how to download anything.
Ed Murphy OK, I see now that it's the DJI Vision app. I turned on Camera but it keeps telling me to connect to Phantom, which has been delayed arriving due to east coast storm...
Can you use the yaw stick when paused at a waypoint?
I think I saw elsewhere that you cannot use the yaw feature. Hope I'm wrong but have yet to test out waypoints on my P2V+
It doesn't work
How do you download the maps? Mine just shows a blank white screen and no maps get loaded while connected to the Phantom wifi?
I think you have to disconnect from the Phantom Wi-Fi and use your phone connection to download the maps and once you have them connect to your Phantom.
Why are the way points coded so strict? I want to be able to go through way points and not stop .... Ground station app for iPad has way nicer way point control and really I don't think that it would be that much more complicated to have for iPhone android DJI vision app ....
Will this work on a Android Tablet 4.1??
Joey Payne it should yes.
how do you get it to land after it's last way point is reached?
When it comes to it's last waypoint the P2v+ will hover over the home point. Then you can switch back into GPS and land or set a new flight path.
ok thanks
Drone Camps RC Aren't you in GPS mode for the ground station to operate and then switch to ATTI mode to take it back to manual control?
If you hit return home at that position it will land itself
💓💓💓💓