2x Wirtgen W 250 Large Milling Machines / Großfräsen, B 14, Waiblingen - Fellbach, 16.03.2018.
HTML-код
- Опубликовано: 16 апр 2018
- www.wirtgen.de/en/products/co...
2x Wirtgen W 250 Large Milling Machines & truck fleet / Großfräsen mit Lkw-Flotte, Sanierung B 14, Waiblingen - Fellbach, 16.03.2018. 
Авто/Мото
Bin wieder mal begeistert
Danke Uwe! LG
Great Working
Thank you!
Mein Kleiner liebt diese Videos. Ich könnte ihn stundenlang davor parken. Ich dagegen bin froh, dass ich nicht mehr auf Baustellen fahren muss :D
Hehehe, freut mich, wenn Sie entlastet sind dadurch, aber Sie wissen ja, nicht zu lange auf einen Bildschirm schauen lassen ;-)
@@BeytekinConstructionMachinery ich sage ja ich könnte ;) Aber da er was anständiges lernen soll, übt er fleißig mit den Spielzeugbagger :D
;-)
Ich arbeite bei Wirtgen in Windhagen!
Toll die Maschinen auch mal live zu sehen.
Grüsse
Hey, super! Hat sich durch die Übernahme der Amerikaner was geändert?
Benjamin Beytekin Naja teilweise schon.
Aber im groben ist momentan noch alles wie vorher ausser das manche Sachen etwas genauer genommen werden.
Grüße!
Обчислення середньої заробітної платні медичні
Влада не знаєш як дуже часті
Влада мюс створити власну справу планування роботи
Julio saludos Ecuador
Me alegro. ¡Saludos desde Alemania!
Sehr schön Video👍
Vielen Dank!
Hello everyone be careful and be safe your friend Ricky hernandez from Northridge california 😊😊🎉🎉
Hey Ricky, thx for the wishes. Take care too! 👋
Une petite caméra sur le toit du camion serait l'idéale pour ne pas avoir un torticolis et ainsi avoir un juste chargement bien dur les essieux arrière et non sur la direction du camion merci antonin
Une caméra faciliterait ce travail. Cependant, ces remorques à benne basculante sont rarement utilisées avec une raboteuse à froid. C'est pourquoi les propriétaires n'achètent pas de caméras pour cela.
Wonderful work
Fascinating stuff, Ben. Seen it before from a car but this is the REAL thing!
Thx Alan! By sure. How fast they mill the roads. Awesome.
Thats Germany ;)
I like this machine 😃Cut, scrape and crush onetime along with its efficentcy...🖒🖒
Thx for watching and comment Terence!
Soy de Argentina y esto en mi país jamás sucede las carreteras son un desastre llenas de baches gigantes que jamás se arreglan
Hola Osavaldo! Lo siento ¿Su gobierno no tiene dinero o el dinero se va a otra parte? Un saludo desde Alemania.
Super video!
Thank you!
Fascinante mesmo poderia ter um desse brasil ou goias que aqui as rodovias ta precaria
:-)
That must’ve been one big road to require two milling machines. When The city paved my streetin 2016 it was the first time I saw one. Since I was home by myself I was not able to shoot a good video of it because I got the camera angle wrong but it was a Wortgen just like that one.
There were total three milling machines running because of the short time they had to remove the asphalt. Only one weekend from friday night to the early monday morning for removing, paving and paint the road markings on that interstate.
Interesting machines
Yeah, awesome to watch!
Deutschland nummer 1
:-)
Nice!
Thank you!
Interesannt so ne Hängerzug Beladung wie bei 7:40
Fand ich auch!
nen hänger haste in der Hose ;) das ist ein gliederzug!
Bei den großen Fräsen geht das ja noch. Bei den kleineren Gehwegfräsen darfste dann rückwärts hinterherfahren :D
AMIGO JÁ VI MUITAS VÊZES RASPANDO A ESTRADA GOSTARIA DE SABER PARA ONDE VAI O PRODUTO RASPADO?
Hehehe, I'll try in the future to get in the asphalt plant.
@@BeytekinConstructionMachinery IT WILL NEVER BE WITH FORCED EXAUSTION DRUM PLANTS
My driveway is really short so I could sit in my driveway and the worker would actually be able to see me watching as he cut that section. And he actually waved at me so that was kind of cool. They cut the street down all the way to the P gravel because the angles were not correct when they originally built the road in 1990.
Course they are going to have to pave both streets again in a couple of years because the plows from all the snowfall that we’ve gotten messed them up again.
Were there any problems in cause of the wrong angles? Nice, if workers are happy to be catched or watched ;-)
Well we had some serious drainage issues because of it. When they did the sewers to raise them they also had to dig out the culvert pipe and replace that. But they said they’re going to have to grind down the streets all the way to the dirt next time because they want to fix those angles.
The city said “ we will fix that later.” And the contractors were not very happy about it.
Ok. So much more to do and film! ;-)
schon video
Danke!
Ровная же дорога. Нах снимают
Very nice video. I live in USA. Back in 2007 I had my own truck and I was working for a paving company, they pay us $65/h if you have your own truck. I wonder how much this trucks make per hour to do same job in Germany?
Hey, how you doing? Well, I don't know how much German truckers get for their own truck per hour.
Benjamin Beytekin
Thank you for answering back to me.For some reason I figure you working for this company.
No. I a freelance photo journalist.
They get around 50-90€ per hour
Geiger Nr 1 in the World
:-)
@@BeytekinConstructionMachinery 👍
Wonderbar beni
Dank schee!
why does asphalt needs replacement ?
Они просто новую дорогу срезают :(
;-)
И только наши увидели что реально они тупо режут новую дорогу :))). Скучно немцам - придумывают работу для своих чотбы не голодали.
У нас такую укладывают))))
Aspal masih bagus kok di kupasin....
Bagi mereka itu udh gak bagus
Ya, itu benar sekali. Material ini dikembalikan ke pabrik aspal, dibersihkan dan dijadikan aspal baru dan dipasang kembali di sini.
My job I am milling oprator
Great! What kind of milling machines and what type of works?
My job i'am milling oprator (w1000/w1200/w60/w210i)
And you search a job in Europe?
How much do mill operators get paid in Germany ?
Bepin oui car j'ai travaillé comme chauffeur poids lour dans ce métier et je connais es problème
Ok