OOPS! I Blew Up My Turbo Godzilla Swapped OBS Tahoe
HTML-код
- Опубликовано: 27 мар 2024
- Welp, "WE" broke my Texas Speed built Turbo Ford Godzilla engine and smoked a brand new, very nice transmission in the process. When the thrust bearing shatters and sends the crank moving back and fourth *long ways*, you can expect some pretty nasty results. Luckily I tend to learn from my hard mistakes. So im pulling the Godzilla and sending it back to Texas Speed for a full refresh. I've also already got a brand new Gearstar Transmissions 4l85e spec'd out as gnarly as you can get and with a full manual valvebody and transbrake...because 4wd burnouts. And you can expect to see episodes on every step of the process.
FOLLOW FOR MORE:
IG: / mister_zachary
TikTok: / mister_zachary
GET THE MOST CHOP FOR YOUR LS ENGINE HERE:
bit.ly/BFDChopMonsterCams
(Texas Speed BFD Chop Monster Camshaft)
SELL YOUR CAR AND GET TOP DOLLAR!:
givemethevin/zac
GET 20% MY CUSTOM EPOXY GARAGE FLOOR KIT:
www.ghostshield.com/zac
MY PARTNERS:
Texas Speed & Performance: @TexasSpeedPerformance
Gearstar Performance Transmissions: gearstar.com/
QA1: @QA1TECH
Smeding Performance: @smedingperformance154
Holley Performance: @HolleyPerformance
Vibrant Performance: @VibrantPerformanceTV
Garrett Turbochargers: @GarrettTurbos
Tick Performance: @TickPerformance
Driveshaft Pro: @Driveshaftpro
Squarebody Syndicate: @SquarebodySyndicate
AFR Heads: @AirFlowResearchHeads
Dart Machinery: @DartMachinery
Bendpak: @BendPak
SPECIAL THANKS TO:
@Gearstar750
@TexasSpeedPerformance
@VibrantPerformanceTV
@TickPerformance
@CurrieEnt
@Driveshaftpro 
Авто/Мото
The fact you produced your own content for so long and did you own editing is the express reason this channel is so damn good already. Living proof that Hoonigan was always the People
Yep. This channel will be huge fast. Cool dude and he's funny too.
@@barrysauce This, Hert and Tpains, probably all the other Big people who left hoonigan. Absolutely. Its a hollow shell now. They honestly should relinquish the name and trademarks/copyrights to the people who built it. Just let the wheel company go back to being what it is.
So fuckin glad you have your own channel. And having grimm and suppy next door is amazing. Hoonigan may be dead but its soul lives on through all you OG's. You and the rest of the crew are what made hoonigan.
Suppy's face says it all. Good luck on the rebuild!
That filter scrape was a horror show. You’d never have known it was hurt with that choppy idle.
Get well soon, Waylon
Texas speed has a full time job serving youtube guys burning through their engines. Cheers Zach! I just opened a fresh one
Makes me question the hype tbh
He said what he did, bolt it together with the wrong torque converter spacing, and when it broke the transmission it tried to push the converter through the front of the motor.
Idiot RUclipsrs tearing up good equipment from lack of skills.
Seems like Cleet was going through a few Texas Speed motors with Ruby and Leroy back in the day
@@hdoglesbythat will happen when your run several 100 hp more then the motors are rated for, there solid when run how there intended
@@hdoglesby cleet was also pushing them well past what they could handle as well.
Everyone LIKE, SUBSCRIBE, RING THE BELL, AND COMMENT! LETS GET THIS CHANNEL WHERE IT BELONGS!
I SUPPORT THIS
@@MISTERZACHARY AS DO I WILD MAN! Lets get Whalin back to rippin!
I know it’s a bit of a long trip, but love to see this on Cleetus’s next awd shootout.
Dont think ill be able to make it in time for that, but would definitely make the trip out to see Ol' Cleeter and get dusted by whatever menacing build he happens to be running at the time
@@MISTERZACHARY just don't learn how to tune from him or you will be pulling the engine a lot 😂
Transmission/converter is what typically wipes out the thrust bearing…
Too much pump pressure ramming the converter into the crank, or the converter is ballooning.
I don't know what converter Zack was using with that GS Pro 4L85e but I would hope it was billet and good for anti-ballooning. Pump Pressure sure lets see what 300 psi will do lol
That “okay “when you dropped the wrench😂
10000000000% should do a Race Week!
1000000000% would
And now we know why Hoonigan's edits were so awesome, can't wait to watch this channel blow up!!
My jaw literally dropped when I saw you scraping that filter. That insanely sucks. Fingers crossed the engine isn't toast.
Suppy's face at 2:32 😮😮😂😂😂
Getting my weekly dose of vin, zach, hert, 1 short by suppy haha... who else is pumping out vids that im missing?
where is alex grimm
@@irradiatedgrogSuppys shop.
@@irradiatedgrogworking with suppy
Scotto?
@@irradiatedgrog Grimm works next door from Zac's shop, together with Suppy (amongst others).
I never watched a lot of hoonigan but I am rooting for all the dudes striking out on their own!
A video from Zach and Vin on the same day damn. Love the content. Keep it up
Its great honestly.
Cant wait to see more from you! Love the obs platform
I say a big thank you to DDE for introducing you, never followed Hoonigan but I can see why they were so succesful with people like you on board. Love your style, subbed at the first one on this channel. Best of luck building your own platform, no question that will work out great. I'll be enjoying the content!
Anything with doing, is worth doing well…. These setbacks will lead to a most awesome comeback. What you learn in this process will make you a better builder in the long run. Endure the race and see it through!
Absolutely.
I love this dudes way to work. Good shit my guy
Cheers!! I've been waiting for some beer worthy content
I'm glad the O.G.'s are still putting in work but it's sad they are not all still together.
Makes 3 videos… blows up Waylon. 🤣
Rejected organ transplant
Role reversal lol usually chevy powered ford's do this
yup those 7.2 truck motors ant made for this type of power..stock they delaminate the rollers on the lifters. Look at all of the other zilla projects on the internet. Built or not..your better off with a coyote.. cars make wild power with boost and fuel on stock long blocks.
Cleetus had a 7.3 in McFlurry making shit load of power. Yeah he swapped it for the coyote but it wasn't for lack of power, it was cuz he wanted to go above 6800rpm.
😂😂😂😂
@@jza80kingI believe it was eating head gaskets as well
Cleetus' f150 had the crank go for a walk as well.
Wasn’t that a coyote not a Godzilla?
yes but that was for an entirely different reason.
The F150 has a blower on it. Blowers are hard on the end of the crank snout.
@@rickybobby0314and a 5.0l Whipple at that. That's a LOT for anybody.
the F150 has a coyote, mcflurry had the turbo godzilla until they killed it then switched to the coyote in that one as well. the problem with the godzilla is there just isn't enough part development for it right now to hit high horsepower numbers. texas speed and a few others are trying but they still have a long road ahead of them.
So glad you got this channel to be able to watch what u been up to !
What I love about your channel...... you're a total fuckin broski......and I say that as a compliment. Drinking beers, building shit, fixing shit and making shit better. Keep it up homie. After your appearance with DDE I knew I'd like your style. Cheers
🙏
I’m so glad to see suppy in everyone’s videos!
Your editing has always been fire 🔥👍 keep it up ...
I Dig your style!😎👍🏽
Your editing style is gonna be missed on the Hoonigan vids!
Love the New Chanel!! Cant wait for some other content🔥🤘
Waylon is pretty badass! So glad to see another upload. Keep it up brother. 🤙
Videos are great, loving the content! Keen to see the channel grow.
Still my favorite tahoe series and the next body style as well. Love that build dude!
Letss goo!
Been waiting on this one
The look on Suppy's face when you were scraping all the shit off the filter 🤣
Love it. Wish you had better luck with ye ol Waylon but can't wait to see more content 👍👍👍
And yes being a street race, car or no prep racing on the track it definitely has to be serviced. Well fast. So good looking there, but you'll get wailing figure it out and you'll get recognized for sure. He's going to take you to the top
Great content man! Keep it up engine was surprisingly clean must’ve caught it early.
so cool to see you start through with your own channel and daily uploads since you where the shreditor at hoonigan as i saw in your first video im hyped because i know the content and editing is gonna be fire because it already is
Miss you on this vs that off road. But! Already loving watching your new solo shit my dude.
Waylon Jennings. "Don't you think this outlaw bit's done got outa hand". Great theme song for the big reveal. No matter what, love the content and always look forward to your videos.
love these videos and you as a personality man def wish you the best keep killin it !
Serviceability is everything! I too have the worst time getting to my bolts for my long tube headers. Just gotta grow and keep rollin.
I love your style of videos!!!
Love the build and so good to see you doing your own thing! Ol' waylon's going to be a weapon once he's sorted
So glad the hoon boys are off the leash! Love you guys!!!!!! Also give Jeremiah a cam dude!
any engine builder here will tell you, after metal contamination- always a new oil pump, and have to clean every oil port. only way it wont blow up again. either way cant wait for more content from you Zach. if you got merch link it plz. 🎉🎉
Zach this channel is booming! Let's go!! You deserve it.
Always a good day when Zack attack is on
Channa, I love how to do the whole car thing, your the best 👍
Man so sorry that happened to the motor fam hope you get that beast back up soon 💪🏾😎
Oh man I am so glad you are doing all this shit! Loved you as a host...but turns out your content and videos are even better!!!
Good shit!! Keep it up!!
Looks like you got it saved before it got bad, cost to clean and re-bearing it should all that will be the damage (ideally!) Looking forward to update on tsp page and/or here as well.
So far loving it keep it coming!
damn edits are on point. Giving the good hoonigan times vibes
The update I’ve been waiting for
kudos on working and filming in such a small space. and keeping it clean.
Absolutely loving the vids keep them coming
Making some good content Zach! I'm stoked to see where the trains takes ya! ❤🔥
Good luck homie!
You'll get that on those Ford jobs.
that mural is pretty sick looking! Good job on the workshop Zach!
I recall seeing Steve Morris and a bunch of others dealing with the same issue of torque converter setup destroying thrust bearings
Just image when he gets everything figured out!!@ solid edits! Solid vehicles! Even tho hes a biker.. lol
Dont get to attached to that small shop!!! You we need something bigger soon!!!!
just Ford things... good luck Zach
I anxiously await you and vins vids on Thursday! 🫡💪🏼
Few issues before the great results! Good luck!
Now this is the type of video I used to love on hoonigan. Zachary the man fixing shit he broke
It's cool you and Vin both uploaded today 🎉 Im gona have less free time now with 2 more youtubers to follow 😂🤙💯
Liked for the algorithm. Sad she's down i love that rig. Can't wait to see it racing!
One of the things I miss about my old job is Boxer's random visits.
Good job Suppy an Grim are next door 😂 good to see you all evolving AH
The people need THIS VS ZACH!
My dad had a 96 blacked out with black bumpers on chrome 22s. His had the split back doors. Such a fun truck.
Gotta make some MZ branded merch so we can start really supporting the channel. Cant wait to see the hat designs you come up with!
I'm a sucker for 2 door SUVs, i can't wait to see this thing rippin
I loved watching the Waylon build series. Unfortunate whaf has happened to the old mate. You're the man though, I'm sure you will figure it out. Absolutely love your editing man.
Keep up the hard work bud, make that thing a menace on the strip and I can’t wait to see Waylon make a full pass
Just commenting for the algorithm. Glad you have your own channel now
Brother. I had thrust washers take out and engine on one of my old dailies. I felt this pain, but that was from a weak thrust washer and an agressive clutch to hold some more boost. That only cost 12k though, couldnt imagine 40k down the drain that quick 😅
Loving this new content!!
The pain on suppys face is palpable.
Hell yeah my brother 🔥
Oof that sucks to see. However, what doesn't suck is seeing you and all the other fellas forging your own paths and keeping car culture alive. I'm here for whatever comes next!
Just make sure when they are setting the trans/tq converter up with different spacing you account for where the crank is supposed to be not with the thrust washer missing, in pieces lol. I had a thrust bearing go on a 454 c30 the only way I found out is the trans would squeal a little in reverse
I am glad you havnt given up on it !
Another brilliant video, sucks to be an injured engine but coulda been worse. Looking forward to Waylan ripping
Loving the content brother, congrats on the new garage it’s cool to see your projects you should definitely take a go-pro along next time you break it though ❤🇺🇸💪🏻
At least you caught it before something catastrophic failed. Doing some light polishing on the cam and crank with a usable block is a lot more manageable than needing new... Well, probably would have needed damn near everything if the crank moved enough or the oil journals to the rotating assembly sucked up enough powdered horsepower😂.
Its moving a ton! Clearance should be a few thou without looking it up
Love the homes all doing their own thing
Scary how good something can sound with pieces of beating floating around in it😮
I'm excited to see her going again
I wanna see a full drag build with this tbh suv mullet👀
I think that truck just wants a LS engine 😆
Keep it up brother
Would love some Cleetus and the king of chop content!
Zach you need to give us a story time about the story of delivering a litter of Kittens in Vegas one day!!!