Nobody could make it better than a good engineer. Not because you understand the solution wel, but because you understand the problem so good. You definitely take more time to understand things like me. Amazing video.
Lots of thanks, but I have question. Can we put air separator after the chilled water pump ? I know we should be fixed before chwp but I don't have space in pump room .
I am the video editing software to make these types of animations. Software name - Wondershare Filmora. In Adobe After Effects, you can do more and easy animations.
It would have been better had you explained the working of a condenser and evaporator and cooling tower with figures in the same video representation. Would have been able to grasp the concept better. The truck idea is not so bad, but there is no transfer of chilled water and hot water taking place in a condenser. it's just different pipes. Inaccurate.
@@zebralearnings Yes friend, I need to upgrade a Chiller, I am an automation technician and have advanced knowledge in industrial electronics, I have a lot of knowledge with the PLCs PCO2 system and EVDdriver EVD0000200, I have been repairing PLCs for many years, from time to time I do the calibration of the analog ports and sometimes it is also necessary to download the bios into the MCU of the controller.
@@edsonlopes3610 Hi friend, you need a qualified HVAC technician or Engineer to evaluate your chiller's compatibility with PCO5+, and installation, wiring, programming, testing, and many other things are there.
@@zebralearnings I plan to replace all of the chiller's connectors and cables, so upgrading the connections is practically nothing, I have the chiller's electrical diagram, I can make the changes and I still have the old bios converted and downloaded for the PCO5+
Clear and understandable explanations suitable for beginners and individuals without an engineering background.
Thank you so much.
Good explanation for even a beginner and non-engineering persons
Thank you so much 😊
Thank you for making these very helpful animations
You are welcome.
Great learning system sir thank you so much
Most welcome ❤️
Nobody could make it better than a good engineer. Not because you understand the solution wel, but because you understand the problem so good. You definitely take more time to understand things like me. Amazing video.
Thank you so much for your appreciation.
Wao! Just mind blowing animation and explanation. Thank You sir for making such a wonderful content for us.
You are welcome ❤
Wow you guys amazing...best video i have ever seen...A SUPER THANKS❤
Thank you so much 😀
I had such a hard time understanding this, but now it’s so clear! Thanks so much
Happy to help! 😊
This explanation is very good. We need more video like this.
Very nicely explained. Thank you
Thank you so much. 👍😊
Good videos ❤❤❤
Thanks 😊
Great explanations Thank you sir
Very well explained thank you so much :)
Thank you!!!
The work is really appreciated thank you
You're welcome!
Super creative explanation 👍👍
Thank you so much 🙂
Thanks for your video ❤
Great video! the truck analogy is interesting! if anyone needs a tower, chillers, or pumps in the phoenix area send a note we'll get you hooked up.
No compressor
Very nice way of explaining things. I would be happy if a compressor is added in this video
My bad 😥 The compressor is shifting the truck from evaporator to condenser.
I love this experiment and how chillers work
Super ..Clear Explanation
Thank you so much 🙂
amazing explanation through truck Animation
Glad it helped!
Good Video Most Creative Video
Thank you!!! 😊
So wonderful video More thnxs Go on
Many many thanks 😊
You should have mentioned different temperatures in the process. By the way great explanation
Just, I wanted to explain it in simple way without any complication.
Welldone😊
Thank You 👍
Excellent video, super,❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thank you very much 😍
Wow, very nice explanation 👍🏻👍🏻
well explained
Thank You
Good👍🏻
Thank You
Perfect Explanation
Best explanation
Thanks for liking 👍
Excellent explination
Thank You!!!
Nice 👍 sir.
Super explain
Thank you 🙂
Clear and understand
Thank you 😊
Amazing
Thank you, and keep support.
very good
Thank You
Lots of thanks, but I have question.
Can we put air separator after the chilled water pump ?
I know we should be fixed before chwp but I don't have space in pump room .
is the location of the pump put wrongly? the pump should pump the chilled water or condensor water to higher level right
Thank you so much sir
Most welcome
Please make the videos on how to calculate heat load, CFM, Static pressure and how we select cooling coil for AHU?
Yeah! Good suggestion. I will make soon.
Very nice
Thanks 🙏
May i know how condenser and chilled water and compressor is working in this loop
Good explenation, but Compressor missing in this refrigeration cycle system
My bad
Super thanks
Thank you!
感謝！
不客氣。
nice
Thank You
Super
Thank you.
Which software used for create this video
super thanks
Thank you too!
Thank u so much
TNX BROTHER
Thank you 😊
Thanks sir
Can you draw the compressor ? Where is it located ?
What does the compressor do in this cycle
Please post the complete technical design and parameters of chillers and heat exchanger
How to determine the volume of chiller plant based on room size
Amazing video, may I know the software used?
It's Wondershare Filmora
Sir your method is great i have one question? How can i ask
You can ask in the comment section or through the mail address.
how you make this type of videos, want to know.
I am the video editing software to make these types of animations.
Software name - Wondershare Filmora.
In Adobe After Effects, you can do more and easy animations.
@zebralearningsenglish-pn6fl thank you
❤
🥰
Without compressor how to pressure increase and condensing the refrigerant 😮
I didn't show the compressor in this video, I made this video to understand the chiller plant easily.
Hi sir please chiller display explain how the work
I will explain
If expansion valve can give cooling then why we need cooling tower
Bro learn basic of refrigeration
It would have been better had you explained the working of a condenser and evaporator and cooling tower with figures in the same video representation. Would have been able to grasp the concept better. The truck idea is not so bad, but there is no transfer of chilled water and hot water taking place in a condenser. it's just different pipes. Inaccurate.
How about the compressor. There is no compressor in Chiller?
My bad for not adding the compressor. Actually, the compressor is shifting the truck from evaporator to the condenser.
@@zebralearnings Either way, your videos are really dope fantastic. Keep it up!!!!
Where is the compressor unit??
Air cooled chiller plant animation bana dijiye
Sure 👍
Please i am new with chillers
I need help 🙏
All the best.
Stay tuned for more videos.
Where is the compressor n work
Kenapa itu gambar nya ada getaran,,raster horizontal tutorial nya blom slese tuhh..suhu maaf melenceng dan koreksi 🙏🙏
The truck is vibrating because of the running engine.
Where is a compressor?
😟 Compressor is the one which is shifting the truck from the evaporator to the condenser.
Hello please can you help me with my PCO5+ and EVD0000E20 upgrade? I can pay for the help
Do you want to upgrade your system with PCO5+?
@@zebralearnings Yes friend, I need to upgrade a Chiller, I am an automation technician and have advanced knowledge in industrial electronics, I have a lot of knowledge with the PLCs PCO2 system and EVDdriver EVD0000200, I have been repairing PLCs for many years, from time to time I do the calibration of the analog ports and sometimes it is also necessary to download the bios into the MCU of the controller.
@@edsonlopes3610 Hi friend, you need a qualified HVAC technician or Engineer to evaluate your chiller's compatibility with PCO5+, and installation, wiring, programming, testing, and many other things are there.
@@zebralearnings You are wrong friend, I don't need an Engineer
@@zebralearnings I plan to replace all of the chiller's connectors and cables, so upgrading the connections is practically nothing, I have the chiller's electrical diagram, I can make the changes and I still have the old bios converted and downloaded for the PCO5+
Very good
Thanks
very nice
Thank you