Watch the Controller Workshop video right away: ruclips.net/user/XIMCentraljoin Link Channel Membership Subscription: ruclips.net/user/XIMCentraljoin Buy XIM Matrix here (paid links): Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66 Amazon US: amzn.to/3DTZkFS Amazon Germany: amzn.to/3KFbsyd Amazon UK: - in a few weeks - Amazon France: amzn.to/45Pr5es Amazon Italy: amzn.to/4609Ebg All XIM Distributors & their shops: xim.tech/shop/ Link XIM Workshop Firmware & Manager: community.xim.tech/t/xim-matrix-firmware-20240114-manager-20240114-beta/280976/3 Link XIM Manual: guide.xim.tech/What-Is-XIM-MATRIX/ Link XIM Matrix Groups Guide: ruclips.net/video/3JtCvCplypg/видео.html
Here is my experience with the workshop for specifically cod. The Workshop is useful to make guns more useable and to have a more predictable recoil. It’s definitely a good add and a great start! After hours and days trying to make bullets stack on top of each other with various guns, I don’t think it’s possible yet. I’ll leave the door open that it may be possible, but after watching the tutorials, doing everything exactly as you did it and even trying other things, I was not successful. I would love to see the option be a little smarter and do the work for the user to get the bullets lined up based on the traces recoil pattern. I don’t think it’s there yet, but I’m looking forward to seeing the enhancements to the workshop 😊
Hi, I’m new and I’m a destiny 2 player, I’m trying to make it work this anti recoil workshop on destiny 2 ‘cause I’d really like to try it in game as everyone does, but bullet holes disappear really fast in private games and in general even if I’m fast enough to do it the anti recoil doesn’t come out well, can you give a tip for the specific situation or try doing a config for destiny 2? Possibly an smg! Thanks
Hey, you can take screenshots or a clip and use it as a reference. Ideally on a surface with a distinctive texture so you can later use the texture to compare where the bullets went to. Alternatively use my "XIM Matrix Perfect Anti Recoil" video guide. With that one you dont use the Workshop and disappearing bullet holes are no issue. It takes a lot longer though and is more tedious.
Use the vertical modifier to tighten the recoil so the full magazine fits onto the wall. Or just do 50 bullets instead. Realistically there wont be any ranked moment in which you will shoot more than 50 bullets in a row.
I need help. Im a new XIM matrix user. And i have a question How can I fix it for my controller I mean, how do I use it like you do but for controller not MNK?
So do you have to do this for every gun? Seems like a lot of work. I just added some magnitude to my ads shooting and it helps a ton already and I increase the magnitude if I use 1.5+ scopes
Yes, but luckily game devs are a bit lazy and reuse recoil pattern for different weapons. In regard to Siege the recoil of Jäger = Flores = Osa = Mira = Wamai and so on. So its being reused quite often and you can use one setup for lots of operators.
@@ad6m. Yeah the development over the last year in terms of AI voices is insane! The one used in this video is actually my own one but cloned via an AI!
so when the antirecoil drags my aim down a bit too early, do I do 25 milliseconds for every gun? or does all depend on each gun and what scope I’m using which some will obviously slow down the ads more than others, if so, what do you recommend for 1x scopes? I’m assuming both magnified scopes are 25 ms like this video entails. Also how do I know if I need trigger sab? I use analog movement but use a mouse for aim
You just add 25 milliseconds to the start of the anti recoil smart action sequence, yes. For other scopes either change the ingame sensitivity, or use the new XIM Firmware which lets you re-open the workshop and change the Y and X Scaling again to match the new scope.
To be fair, motion aim is pretty free when controlling recoil and now it is standard in a lot of shooters. No xim needed if you have motion in the controller ie Dualsense.
From the popular games only two offer native gyro on consoles, and in both games you are better off to use stick aiming due to how insane the aim assist is in these games. Matrix offers you to use gyro mapped to mouse or gyro mapped to sticks. The latter results in gyro aiming having access to aim assist which puts your accuracy on a whole new level!
@@XIMCentrali think his point, is that although the ability to use different inputs on console etc is great, adding anti recoil features to Actually allow basic cheats, is a step too far. Which is also my opinion, being a Xim matrix owner. I love the device, but providing recoil cheats (anti recoil features) just give more reason for controller players to cry about Xim/Mnk being cheating. Which would be completely false had we not had any anti recoil features.
@@vYakss It’s not hard to make your own Anti recoil values, using the Workshop. I did mine, just fine without all the extra steps in this video. Just use workshop but trace 6-10 patterns then adjust X/Y until the spray is the absolute best you can make it. If you want absolutely 0 recoil, you need to edit the final result and adjust each of the values incrementally until you have removed the recoil from each direction change on the anti recoil.
@@roughrogue1426 Your XIM wouldnt cause anything like that so its most likely input device related, your network, monitor or something else. Try to isolate the issue by changing one of these things at a time!
I Need help. Im a new XIM matrix user. And i dont have on my manager those extra edits Like aim magnitude, aim angle and wait options. Why? I Need help asap.
So in a game like apex legends.. do you have to do this for every gun and also with every variant of attachment that changes recoil? So like 4 for 301m. Or do you just not pickup attachments?
Since every weapon in Apex Legends uses a different recoil pattern, and each attachment changes it, yes what you said is correct. To simplify things you could just avoid certain attachments, or always stick to the same 3-4 weapons.
@@mikemcrunels3636 You create a new Workshop for the second gun. Your first Workshop is then put into a group as shown in the video linked at the end of this one.
Doesn't seem like this would work for Destiny 2. Weapon recoil patterns can almost be entirely different and bullet holes disappear within < 20 seconds. Would be curious to see what you think though.
Record a video of the recoil, or take a screenshot. Ideally on a wall with distinctive scratches or texture that later helps you to tell where each bullet went to. For Destiny 2 use two workshops on top of each other to achieve a perfect result.
When I try to trace it says to make sure there is no shooting binds active but I deactivated it on r6 and it still not working I’m on controller trying to donit
If we change in game settings slightly, ie adding aim acceleration in pubg, would you recommend turning it off for the workshop then is it ok to turn back on after?
If you turn it back on the anti recoil effect may no longer be as good as it was when not using acceleration. However you are right, for tracing you want to use 100% the recommended ingame settings which i think means no aim acceleration. If you cannot play without aim acceleration then turn it on again after the Workshop is complete, and check if it affected the anti recoil in any negative way.
Just do it from a closer distance. Recoil is always the same no matter the distance. Thats why in the video the distance to the wall is so close. You want a good distance between each bullet hole to make it accurate. Therefore too close is also bad.
I’m having trouble with the anti recoil workshop in Apex Legends , im not moving and tracing all my bullets exactly how you said to do it , but it keeps making my recoil shoot down and it’s just not working at all. once im done tracing it’s making 3 large red dots and one of the dots keeps going all the way down off the model (screen) im not sure what else to do, maybe you have some knowledge about this?
@@XIMCentral I set up my weapon using the anti recoil workshop. When I reenter my Human Behavior values and remove the Behavior Simulation disabler ( clock in the top right on the configuration ) from my workshop the recoil returns. However, when I lower my human behavior input on the drop down, the recoil gets cut out again. I just don't know that can use a lower human input and not get a mouse trap. What do I do?
@@SealLDBD Hey, for anti recoil turn it off (red clock). Since you are aiming all the time while shooting you add human error = aiming in there anyway! :)
Hey, you have to play around with the X and Y scaling to find the perfect combination. Otherwise it will only get worse. Sometimes you achieve a better result by changing the X scaling by one value, which then lets you use a different Y scaling value with better performance. The key with this method is to find the most optimal Y and X scaling value, only that way you achieve a perfect result. Also please make sure to consider the steps from the beginning of the video or otherwise it will be impossible to achieve a perfect result. That means you must use the recommended XIM ingame settings, no SAB, dont use smoothing deactivated and such things. If you experience mouse stutter fix that, it can also negatively impact the tracing result.
The gun has too much random recoil. Each time its different. The first 5-10 bullets can be zeroed completely, but the second half of the magazine will always go somewhere else. So those you cannot remove completely.
Hey, in some games such as Siege that is just how it goes. The more you compensate the recoil the more the recoil pattern changes. Thats why you need a second Workshop on top to remove the remaining (new) recoil pattern.
Matrix supports both Controller and MnK and all of its features work with these input devices as well. So if you are a controller player then sure, you can use all XMatrix features including the workshop with it too!
Great video as always. Setting up this in call of duty can be tricky though, you should make a video about that. I´ve notice that recoil change the further away the enemy is even though the recoil seems/seemed good when you set it up.
CoD is not different to what is shown in this video. You spread out the bullets either via vertical modifier, or via manual smart action. Then trace them and adjust X and Y scaling. A second workshop is usually not needed for CoD, but can significantly improve the results if you want a truly perfect result. The issue you describe with enemies being further away is due to the aim assist slowdown. Aim assist strength changes based on the distance to the target, and therefore the slowdown also changes. I addressed how to handle that in the first workshop video! :)
Test it on the firing range on call of duty and you will see. When you shoot the wall which is close to you and have followed the steps in the videos it will be perfect however when shooting a wall at a medium to long range distance (with no aim assist slow down) it will rise more, I’m not sure what mechanic they have implemented into the game for this however it means it’s not perfect on cod. I personally play with a recoil setting where the final target in the firing range will have no recoil with the slow down however if I shoot through fencing or panels my recoil pulls down too much as I have no slowdown. I still feel this is the best way to get an advantage
Can you make a video on how to switch between weapons like a primary pistol to your auto rifle for example and have different bindings for them please?
Game developers usually assign different recoil patterns to different weapons. So you will have to address them separately. See the end of this video on how to do that in a very convenient way.
The Behavior simulation option on smart is turned on or off after completion, I'm talking about the option within behavior simulator, not the one below mapping. I ask because I don't know if it influences the mousetrap
@@filipeghiggi That is how you turn off the variance for that smart action. So wait actions do not have any variance anymore to make them appear more human (but instead use the exact wait action timings that you have specified).
Hey, i heard similar reports from other users. I can look into it but it might be that his recoil is bugged. Other operators had that in the past too, where the gun had not just one recoil pattern but several and each time you had a different one (Finka had it a while ago, Wamai a year or two ago too).
Hey, did you activate the advanced mode in your config? Also it will always show you the buttons of the controller you have attached. If its a Xbox controller it will be Xbox buttons.
Struggling with switching anti recoils… im copying rml anti recoils and pasting but how do I switch between them? Only group A one seems to activate. They all come with left click mouse button. Do i need to make another keybind to every anti recoil and if i click that button then it switches to another profile?
Hey I haven't played with a xim matrix since initial release of it, I played overwatch and swapped back to the xim apex due to it feeling a bit "floaty" is how I'd describe it I thought I'd rebuy it and give it another shot would you say the newer firmwares etc has improved the feeling on overwatch? (That's what I've heard from others)
@@XIMCentral Oh okay that'd be great if you can make a video about it once it's released I used to be in your discord but swapped over yt accounts I will rebuy a membership again once I get my new ps5/xim
@@ad6m. Happy to hear that and definitely let me know how you like the new XIM plus the upcoming beta firmware! All alpha testers are blown away by it (when comparing it to XIM Apex)!
@@XIMCentral Great to see them improving on it so fast can't wait how it is and if you make a new video regarding the changes, also mentioned this to my friend who's currently maining the apex over matrix right now on overwatch for this issue he'll be excited for the update too
You can record a clip or take a screenshot. Ideally from a wall with a very distinctive texture or scratches, so you can later easier identify where the bullets went to when looking at the screenshot or clip.
Do you have any advice for PC users like me who aren’t getting that “perfect” recoil result. for me it is working but it’s not pixel perfect by any means (on Rainbow 6). When I try to stack workshops it doesn’t change the result much at all. I’ve checked the DPI values are matching and have mouse calibrated. any tips ?
Hey, this is usually due to the requirements shown in the beginning not being met. Such as ingame settings that dont match the XIM requirements, the mouse is not running on the DPI value specified in the XIM config, the sensitivity is just way too high or you did not stand still while doing the workshop. Any of these will distort the outcome.
@@XIMCentralYea , Im almost certain that I did all the steps correctly , but the problem for me seems to be when trying to stack the workshops the result doesn’t change much at all and even when I change the X and Y values i’m still not getting that perfect anti recoil that I want. Not sure if you have any other advice for me but thank you for your responses to my other comments anyways.
@@drel3003 Hey, that could indicate that some of the requirements are not met to get an optimal result. Such as your sensitivity being too high, you are too far away from the target, the bullets are not spread out enough, SAB is still active, ingame settings are wrong and so on. All of these will make it more or less impossible to achieve a perfect result.
Hey, funktioniert denn die Matrix nach dem Update oder nicht? Weil im RUclips zeigen die alle das alle Adapter inkl. Cronus Zen funktionieren nicht mehr und man kann damit nicht spielen!?
Because you need to reactivate your shooting button (see the voiceover for when its reactivated, its not shown in the manager video but only mentioned via the voiceover).
Yes absolutely, all Matrix features also work with a controller. In one week i will release the Controller Workshop tutorial video, its already in early access foir channel members! :)
@@XIMCentral got it I can't wait to use it I was just afraid that I need mk to use this device because I'm used to controller also does xim matrix work even with the new ps5 software update?
Hey, take a screenshot or record a video of the pattern. Do it on a wall with scratches or a distinctive texture that you can later use to reference where each bullet went to. If neither of the two works then use the manual anti recoil setup as shown in my "XIM Matrix Advanced Anti Recoil Guide" video.
@@XIMCentral Yeah, I thought about it, but it's not convenient in apex legends. Btw. There is a thing in apex legends, jitter aim. Is there any option in xim matrix to create something like this? I just purchased xim and made a lot of useful macro, but this one I don't understand how to make. Much appreciate your help.
@@БаркушаБарк Yeah you can do that. See my older XIM Matrix Perfect Anti Recoil video on how you would do that. You basically use a smart action with aim actions in it that replicate the jitter aim you want to do. The video shows something else but the concept and setup is the same for jitter aim.
Hey, what do you struggle with when doing it for an LMG? And do you really have a need to shoot say 100 bullets in a row? You must only trace as many bullets as you think you will shoot without interruption.
Hey, if you are sure you have carefully traced the pattern then its maybe due to weapons way or your mouse sensitivity being too high. The higher the overall mouse sensitivity the less accurate the workshop will be. If in doubt raise your XIM sensitivity to something like 70 cm/360° and trace the pattern then. That way you get a much more accurate result.
Yes. And thats why you must deactivate all other fire actions, so your weapon wont shoot when tracing the bullets. The Workshop will pause the fire action with which you launch the Workshop. As for your second question, you just use a random controller button as a temporary group toggle that doesnt do much in the game. Say DPad Up for example. Once you got your second workshop result you delete the group toggle button again anyway. Also you can use modifiers if you run out of controller buttons.
Some games out now have regular aim and focus aim, where you hit RB, for example, to focus your character's steadiness. Is there a way to bind a recoil control to that said RB/Focus aim button? If so, how?
You could create a second workshop when being under focus mode and have the focus mode button make your Matrix switch between both. Overall it may be easier to just not use focus mode but only run normal with a 0 recoil workshop result.
Since weapons usually use different recoil pattern this isnt possible. What you can do however is to use a light anti recoil effect that then works for every weapon. Like an invisible additional weapon perk. The remaining recoil must then be removed manually by aiming of course.
Just set up the workshop but I’m having trouble using it into a group. I wanna put the workshop recoil is it’s own group while still being able to regular shoot but it disabled the both and I can’t figure out how to disable that. Ik how to enable it with a button but I need the regular shoot😊
@@XIMCentral thanks so much. This device is awesome I couldn’t learn in last summer but I’m getting back into it. I’m happy you guys make videos for everything
Yes you can and yes for the presets. See my Controller Workshop video on how to do it on a controller. As for the presets. see the Matrix Groups video shown at the end of the video.
Any idea when we will have direct pass through for the ps5 controller once more ? Its so annoying having to go into navigation mode to use the controller in game , I dont get why the change was even made in the first place ?
The required XIM ingame settings are needed for the most accurate result. You can also use other ingame settings but the result will may not be as good anymore then.
At MW3 with 60 round mags it somehow gets a bit harder at the second half of the mag. So i always do some editing on the script after finishing. the first half of the mag is usually good but then i delete the second half in the script, and just add 175/185 degree angle myself myself on low magnitude and infinate wait. i test and adjust it, by testing on walls map Terminal, at domination spawn A. Works fine. Most of the time you dont spray 60 consectutive bullets on gunfights, so everytime i release the trigger, the script restarts on the next fire. For those really occasional moments the recoil pattern works well enough. edit: i remembered works even better when you make a smaller patern at the workshop, with say 30 rounds max, and then add script for the rest of the mag on your own.
Siege has the most complex weapon recoil out of all games which is why its used for demonstration purposes. CoD is a lot easier than Siege, its just challening to find a good spot to dial in the recoil since the shooting range is rather bad.
@@XIMCentral i noticed my mouse inputs on the workshops looks different then the recoil patern on the wall after dialing in. is this all due to the weapon sway?
There are times when I'm playing and I stop pressing a keybind but it keeps pressing making it move on its own, why could this be? Could it be a factory defect? I'm using the matrix
Does it only happen with keyboard keys? If so it could be a low key rollover. This can cause your keyboard to get inputs stuck if too many keys are pressed at the same time.
Hey awesome video! But i am getting a "Insufficient binding Capacity for Workshop " error. I followed your multiple profile setup video and you have over 12 workshop profile setup and i only got 8 and i am getting that error. I'm just setting up 2 recoil profile per gun Apex Legends, to get that ultimate recoil delete. Any ideas why im getting that error?
Yes! All XIM Matrix features also work with a controller! In one week i will release the Controller Workshop tutorial video, its already in early access for channel members!
Reached the second workshop step. Assigned a new binding on the left mouse button. Started the workshop again with "f group" active but when I try to trace again I got "binding that fire must be disable". Any suggestion please
@@XIMCentralyes but probably we need a video for PUBG specifically because is a lot more difficult and tricky in understanding where and how is the best way in adjusting und using at the best performance the last firmware with this game. Unfortunately PUBG have a lot of randomization on the patterns and I think you are the best person how can understand how to achieve a pretty acceptable antirecoil.
Sooo were not gonna show how to do it for strictly controller? Ive tried using the workshop but it doesnt work, just says shooting keys must be off, so how we supposed to use them?
For Apex Legends, how can I make a movement script like ´siperglide´ or ´superjump´?? Is it possible that xim matrix copy my movement and captures it into a script?, I mean, like to record the input movements and then translate it into a script
A smart action recorder will come later in 2024. Until then just manually add the button sequence that needs to be performed for this into a smart action. Or use the community shared smart actions from the XIM Forum if you dont want to do it yourself.
Doesn't it make it really obvious when you negate any recoil as much as this? Just curious if people mention it spectating or on kill cams. I personally don't like to take it as far as this as it just makes it obvious
A question I’ve had for a while… I’ve just been using the default mobile app for xim matrix and if I upgrade to another firmware on pc and go back to my app it won’t allow me to connect to my xim. How do I fix this?
So I did the first workshop and tried to do the second one but when I go into the second workshop it still has my first workshop recoil it won’t spread using the 16degrees up thing
Hey, see the steps shown in the video with the groups and everything. Also listen to the audio as at one point i deactivate the second workshop by pressing the respective button (not shown but said via the voiceover). It sounds like somewhere during your second Workshop a setup error occured, probably with the group activations. So go through the video step by step again id say! :)
@@XIMCentral I figured that out but I still can’t get it to shoot straight far away also it struggles up close do you think if I send you a config through discord or something you can make some tweaks to it or help me get it straight I just got it 4 days ago and everything else is straight but this one has really bad horizontal recoil it’s the AK holo on rust
@@TelepathiQGaming Oh ok its rust. The issue with rust is that the aim mechanic is really wonky. So although you perfectly traced each bullet, due to the wonky aim mechanic the outcome will be slightly off. A second workshop on top can help, but i found it to be easier to just accept the first workshop and then manually adjust the smart action sequence wherever the result is off. So i basically do what i showed in my "XIM Matrix Perfect Anti Recoil" video by changing the respective recoil block that is slightly off.
Hallo, erstmal vielen Dank für deine Mühe. Ich spiele R6 auf dem PC, sprich mit der nativen MnK Unterstützung. Ich habe versucht deine Anleitung zu befolgen, jedoch habe ich noch ein paar Fragen bzw. Probleme: 1. Kann ich bei den ersten beiden Workshops "ADS Only" setzen, damit ich im Gamemenü ganz normal Linksmausklicks ausführen kann? 2. Es macht bei mir einen erheblichen Unterschied, ob ich aus 5 Metern auf das Ziel schieße oder aus 10, 20, 20. Bei 5 Metern ist das Schussbild nahezu perfekt, aber je weiter ich mich entferne, desto schlechter wird das Schussbild. 3. Der erste Schuss landet in der Regel dorthin, wo ich hinziele. Die weiteren Schüsse landen recht komprimiert knapp drüber. Ich glaube das hat was mit der 25 millisekundigen Verzögerung zutun, die du empfiehlst einzubauen. Kann das sein? 4. Im Grunde ist der dritte "Hilfsworkshop" (in deinem Fall Key J) nachher überflüssig und kann gelöscht werden, oder? Sorry für die vielen Fragen. :(
Hey, ja ADS Only kannst du benutzen. Je näher du an der Wand bist umso mehr Pixel musst du pro Loch zurücklegen was die Genauigkeit erhöht. Du kannst aber jede Entfernung nehmen.
@@MrKemaev Use the vertical modifier to avoid this, or the manual recoil spreader shown in this video. The recoil stops because the game doesnt recognize any aim input.
Im trying to do the third workshop stack but it just makes the recoil worse. Im trying to do it for the rust AK and i dont know how to the 3rd one. Any help?
For rust i would recommend to only do one workshop, and then manually edit the smart action sequence to get it perfect. The aim mechanic of the game is so bad that the tracing will not 100% reflect what happens in the game. So manual editing is better than adding more Workshops!
Hey I’m having some problems my mouse is super slow for no reason I have the same dpi and a decent sens but it takes 5 mouse swipes across my pad to do one 360 how do I fix this?
Hey, please try the DPI Checker in the XIM Manager. It sounds a lot like your DPI changes didnt get saved onto the mouse memory and as a result are only active when the mouse is connected to the PC. So your mouse probably runs on a much lower DPI value when connected to the XIM.
Hey my friend, i need your help. İ just made the update after that my phone says connecting to xim matrix but stays like that. İn blootooth it shows connected but in app i cant do nothing becouse it stucks connecting screen. İ made factory reset still same.
Hey, please shut down your phone completely and start it again. That usually solves Bluetooth pairing issues. Then press the button on the XIM so it starts blinking and open your phone manager.
@@XIMCentral i guess found out from the forum. İts becouse ios put limit this beta version. So i can not update from any ios. So my xim matrix is last version becouse of this i cannot connecting. Do you have a idea what should i do ?
I have an issue on dayz I use rb as a radial button and in the game if you hold down LT to aim you can use lb to lean left while still using aim down sight gyro motion. When I go to use the lean right rb and gyro motion it does not work because the rb was assigned as the radial. Is there a way to make the right lean rb work with gyro motion or would I need to make a group for that?
Hey, id say dont use the radial role in that case and instead place a smart action to this button that uses the sensitivity multiplier action, or even better the turnassist action to boost the sensitivity when in this radial menu. Turn assist works similar to the radial role (while not using an actual radial role).
@@XIMCentral I was thinking about this for a future smart action for removal of bullet spread. instead of tracing the bullets vertically, you unload 3 magazines that is being controlled “recoil compensated for” and the outline of the cluster is traced, the smart action would then configure on the backend how to get it as tight as possible. Or what I’d like to call a “lazer”
i have a question whenever i want to get into the workshop i get the notification “disable simulate analog behaviour to use workshop” how can i do that
@@XIMCentral appreciate your time and your quick response So I update my flash firmware and manager to the workshop update. It ends in like 114 or what ever the one linked into ur RUclips description . So I update it and it goes through the yellow lights to confirmed it’s savings then the rainbow start up lights Then it just pulses red and when I try and connected to my console same thing just red pulses I tried factory resetting but it dosent work
When it’s done updating ,still plugged into computer after yellow lights and rainbow. it just start flashing red .Instead of pulsing white to acts as pair mode
How does anti recoil even work for rainbow six siege? When you use different operators they all have different guns and u can only choose primary and secondary with two specific guns not loads.
I keep having inconsistencies. I’m trying to make a setup for Warden. I’m on my third workshop created, followed the steps. Grouped the first two to be toggled on by J. On the third workshop, the recoil just keeps jumping down to the left. Some will be rounded circles but then the next magazine will jump left. I initially made a profile for Twitch and that worked perfectly fine with just one workshop. Not sure how warden’s mpx is more difficult?
Some weapons in Siege have a recoil bug where the pattern can change a lot. In that case use different weapon attachments, that usually solves the bug.
@@XIMCentral I still can’t get a decent result for the MPX. I’ve experimented with different attachments but still seems to not work where my other weapons have. (F2, MP5, Buck’s Primary, Mozzie’s Roni, Jager’s 416-C) And I’ve done 10-15 traces for the MPX and still doesn’t help the accuracy of the workshop.
@@veetz.- Hey, are you sure its not randomized recoil that you experience? The MPX has quite a lot of randomization actually. Also verify if your ingame settings are correct as well as all the other recommendations from your video. Otherwise the workshop result cannot be as accurate as possible!
@@XIMCentral I mean would the randomized recoil prevent me from creating a workshop for the MPX? It’s just weird, let’s say I get the X and Y to .32 and 1.01. Most bullets will be mostly centered and then it’ll drift to the left, and then if I change the X to .31, then the recoil will go right. And sometimes I’ll get a well rounded centered result. Then the next magazine drifts (where as most of my other workshops I haven’t had that problem, excluding the MP7, another problem). And the thing is for the MPX, I’ve gone as high as doing 12 traced magazines (which seems like overkill but should produce good results) and it hasn’t worked out for me. My set up should be fine. All my in-game settings are the same, excluding the FOV (which mine is 90). The ADS is 50, all advanced options are at 0 and disabled. When I do the workshop, all smart actions are disabled except for Q/E leaning (which lmk if I need to disable it). And my fire action is inactive as well. I make sure I do not move and stay still the whole time while in workshop. But lastly, I’d like to thank you for all your help because I’ve been subscribed for quite some time now. I’m not upset that this isn’t working and I’m not trying to take it out on you. Just trying to see if I can get any insight for the future, thank you brother.
@ximcentral you make great videos for workshop and recoil! keep up the good work. now can you please do at least ONE video doing recoil workshop in call of duty? i have not seen a workshop video for COD yet.i have only seen videos for rainbow 6 and overwatch. thanks in advance
CoD is no different. You just load the Shooting Range through your favourite weapon loadout, then make a 90° turn to the left or right, and then shoot a magazine into the white wall in-between the weapon stacks. Then you trace those.
Hello or a question about the part of the video you say that xbox players can do without dj add a smart action manually, and use vertical modifier but in what sense?
The resolution around the deadzone on Xbox is 256 times larger so you can just use the vertical modifier instead and set it to say 12,00 instead of using a manual smart action recoil spreader with 12,00 deg/sec.
in rainbow six siege when i make a configuration for the smg-12 it does not work properly. when i shoot about 3/4 of my mag the rest of my bullets act as if they do not have a configuration
Watch the Controller Workshop video right away: ruclips.net/user/XIMCentraljoin
Link Channel Membership Subscription: ruclips.net/user/XIMCentraljoin
Buy XIM Matrix here (paid links):
Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66
Amazon US: amzn.to/3DTZkFS
Amazon Germany: amzn.to/3KFbsyd
Amazon UK: - in a few weeks -
Amazon France: amzn.to/45Pr5es
Amazon Italy: amzn.to/4609Ebg
All XIM Distributors & their shops: xim.tech/shop/
Link XIM Workshop Firmware & Manager: community.xim.tech/t/xim-matrix-firmware-20240114-manager-20240114-beta/280976/3
Link XIM Manual: guide.xim.tech/What-Is-XIM-MATRIX/
Link XIM Matrix Groups Guide: ruclips.net/video/3JtCvCplypg/видео.html
Any mouse you recommend for xim? I have big hands and I like the xim with high dpi.
@@flowrd8093 The Logitech G Pro X Superlight is probably the best mouse out there right now. I have every large hands and it fits really well!
Ok tanks
Here is my experience with the workshop for specifically cod.
The Workshop is useful to make guns more useable and to have a more predictable recoil. It’s definitely a good add and a great start!
After hours and days trying to make bullets stack on top of each other with various guns, I don’t think it’s possible yet. I’ll leave the door open that it may be possible, but after watching the tutorials, doing everything exactly as you did it and even trying other things, I was not successful.
I would love to see the option be a little smarter and do the work for the user to get the bullets lined up based on the traces recoil pattern. I don’t think it’s there yet, but I’m looking forward to seeing the enhancements to the workshop 😊
I updated to the newest firmware and updater tool and I'm having a connection error what do u recommend
Thought this was a official channel great vids
Hi, I’m new and I’m a destiny 2 player, I’m trying to make it work this anti recoil workshop on destiny 2 ‘cause I’d really like to try it in game as everyone does, but bullet holes disappear really fast in private games and in general even if I’m fast enough to do it the anti recoil doesn’t come out well, can you give a tip for the specific situation or try doing a config for destiny 2? Possibly an smg! Thanks
Hey, you can take screenshots or a clip and use it as a reference. Ideally on a surface with a distinctive texture so you can later use the texture to compare where the bullets went to. Alternatively use my "XIM Matrix Perfect Anti Recoil" video guide. With that one you dont use the Workshop and disappearing bullet holes are no issue. It takes a lot longer though and is more tedious.
How would i do one for finkas gun if she has a 100 round mag?
Use the vertical modifier to tighten the recoil so the full magazine fits onto the wall. Or just do 50 bullets instead. Realistically there wont be any ranked moment in which you will shoot more than 50 bullets in a row.
I need help. Im a new XIM matrix user. And i have a question How can I fix it for my controller I mean, how do I use it like you do but for controller not MNK?
Hey, i have uploaded a dedicated video on that which explains everything. Its called XIM Matrix Controller Workshop Tutorial! :)
@@XIMCentralBro but I need for controller not mouse and keyboard and which video can u tag me please?
Can’t wait to do this when I get home. Hopping it will solve the issue I’ve been having on the recoil.
Let me know how it works out for you! :)
Insufficient binding capacity for Workshop@@XIMCentral
@XIMCentral i can't set up more than 3 gun
@@apspb-kaybo7783 Hey, i have replied to your other comment.
@@XIMCentralI don’t understand
So do you have to do this for every gun? Seems like a lot of work. I just added some magnitude to my ads shooting and it helps a ton already and I increase the magnitude if I use 1.5+ scopes
Yes, but luckily game devs are a bit lazy and reuse recoil pattern for different weapons. In regard to Siege the recoil of Jäger = Flores = Osa = Mira = Wamai and so on. So its being reused quite often and you can use one setup for lots of operators.
I haven’t watched you since like August or September and I’m like how tf has your accent improved so much? 😂
😂😂😂 Cloned my voice and am using an AI now! ;)
@@XIMCentral Lmao the AI Voice has improved quite a bit to be fair comparing it to your older videos
@@ad6m. Yeah the development over the last year in terms of AI voices is insane! The one used in this video is actually my own one but cloned via an AI!
@@XIMCentralYou're too stupid to even speak without a program.
so when the antirecoil drags my aim down a bit too early, do I do 25 milliseconds for every gun? or does all depend on each gun and what scope I’m using which some will obviously slow down the ads more than others, if so, what do you recommend for 1x scopes? I’m assuming both magnified scopes are 25 ms like this video entails. Also how do I know if I need trigger sab? I use analog movement but use a mouse for aim
You just add 25 milliseconds to the start of the anti recoil smart action sequence, yes. For other scopes either change the ingame sensitivity, or use the new XIM Firmware which lets you re-open the workshop and change the Y and X Scaling again to match the new scope.
i wish xim never went in this anti recoil direction but it was probably inevitable
To be fair, motion aim is pretty free when controlling recoil and now it is standard in a lot of shooters. No xim needed if you have motion in the controller ie Dualsense.
From the popular games only two offer native gyro on consoles, and in both games you are better off to use stick aiming due to how insane the aim assist is in these games. Matrix offers you to use gyro mapped to mouse or gyro mapped to sticks. The latter results in gyro aiming having access to aim assist which puts your accuracy on a whole new level!
@@XIMCentrali think his point, is that although the ability to use different inputs on console etc is great, adding anti recoil features to Actually allow basic cheats, is a step too far.
Which is also my opinion, being a Xim matrix owner.
I love the device, but providing recoil cheats (anti recoil features) just give more reason for controller players to cry about Xim/Mnk being cheating.
Which would be completely false had we not had any anti recoil features.
@@daltonhall970can u show me siege operator recoil configs?
@@vYakss It’s not hard to make your own Anti recoil values, using the Workshop.
I did mine, just fine without all the extra steps in this video.
Just use workshop but trace 6-10 patterns then adjust X/Y until the spray is the absolute best you can make it.
If you want absolutely 0 recoil, you need to edit the final result and adjust each of the values incrementally until you have removed the recoil from each direction change on the anti recoil.
So how do you change it for each gun
See the video linked at the end of this video for that. It will show you how to do that! :)
@@XIMCentral one more question, sometimes I’ll have some input delay in game and sometimes I don’t and it’s not mousetrap, any idea how to fix?
@@roughrogue1426 Your XIM wouldnt cause anything like that so its most likely input device related, your network, monitor or something else. Try to isolate the issue by changing one of these things at a time!
I Need help. Im a new XIM matrix user. And i dont have on my manager those extra edits Like aim magnitude, aim angle and wait options. Why? I Need help asap.
Hey, did you activate the advanced mode in your config?
So in a game like apex legends.. do you have to do this for every gun and also with every variant of attachment that changes recoil? So like 4 for 301m. Or do you just not pickup attachments?
Since every weapon in Apex Legends uses a different recoil pattern, and each attachment changes it, yes what you said is correct. To simplify things you could just avoid certain attachments, or always stick to the same 3-4 weapons.
@@XIMCentralhow do I add a second gun? I'm playing rust and I have ak with no recoil but can't seem to figure out how to add another gun.
@@mikemcrunels3636 You create a new Workshop for the second gun. Your first Workshop is then put into a group as shown in the video linked at the end of this one.
Doesn't seem like this would work for Destiny 2. Weapon recoil patterns can almost be entirely different and bullet holes disappear within < 20 seconds. Would be curious to see what you think though.
Aiming on destiny is already so ez bro
@@VoqreShorts Antirecoil has nothing to do with aiming.
@@Empathizing ur already cheating no need to anti recoil L
@@VoqreShorts What cheat do I have?
Record a video of the recoil, or take a screenshot. Ideally on a wall with distinctive scratches or texture that later helps you to tell where each bullet went to. For Destiny 2 use two workshops on top of each other to achieve a perfect result.
When I try to trace it says to make sure there is no shooting binds active but I deactivated it on r6 and it still not working I’m on controller trying to donit
If we change in game settings slightly, ie adding aim acceleration in pubg, would you recommend turning it off for the workshop then is it ok to turn back on after?
If you turn it back on the anti recoil effect may no longer be as good as it was when not using acceleration. However you are right, for tracing you want to use 100% the recommended ingame settings which i think means no aim acceleration. If you cannot play without aim acceleration then turn it on again after the Workshop is complete, and check if it affected the anti recoil in any negative way.
How do i fix no recoil for longrange? Since its hard to see bulletholes from far away.
Just do it from a closer distance. Recoil is always the same no matter the distance. Thats why in the video the distance to the wall is so close. You want a good distance between each bullet hole to make it accurate. Therefore too close is also bad.
is this exactly the same if u use a controller on xim like changing the y and x value in the workshop?
Yes its the very same. I have uploaded a Matrix controller Workshop video with all details!
I’m having trouble with the anti recoil workshop in Apex Legends , im not moving and tracing all my bullets exactly how you said to do it , but it keeps making my recoil shoot down and it’s just not working at all. once im done tracing it’s making 3 large red dots and one of the dots keeps going all the way down off the model (screen) im not sure what else to do, maybe you have some knowledge about this?
Hey, i have replied to your other comment.
@@XIMCentral I set up my weapon using the anti recoil workshop. When I reenter my Human Behavior values and remove the Behavior Simulation disabler ( clock in the top right on the configuration ) from my workshop the recoil returns. However, when I lower my human behavior input on the drop down, the recoil gets cut out again. I just don't know that can use a lower human input and not get a mouse trap. What do I do?
@@SealLDBD Hey, for anti recoil turn it off (red clock). Since you are aiming all the time while shooting you add human error = aiming in there anyway! :)
pls make a video for Bandite. Some guns like that that are very hard for me that setup a norecoil setting.
Thanks for the recommendation! :)
I’ve watched this video atleast 10 times & every time I try to use the workshop my recoil ends up worse than what I started.
Hey, you have to play around with the X and Y scaling to find the perfect combination. Otherwise it will only get worse. Sometimes you achieve a better result by changing the X scaling by one value, which then lets you use a different Y scaling value with better performance. The key with this method is to find the most optimal Y and X scaling value, only that way you achieve a perfect result. Also please make sure to consider the steps from the beginning of the video or otherwise it will be impossible to achieve a perfect result. That means you must use the recommended XIM ingame settings, no SAB, dont use smoothing deactivated and such things. If you experience mouse stutter fix that, it can also negatively impact the tracing result.
Trying to make this work for the smg12 but not getting good results. Is the gun just too sporadic?
The gun has too much random recoil. Each time its different. The first 5-10 bullets can be zeroed completely, but the second half of the magazine will always go somewhere else. So those you cannot remove completely.
I don't know why but parts of my recoil work while others don't. The recoil will be good until the last few goes when it goes off track.
Hey, in some games such as Siege that is just how it goes. The more you compensate the recoil the more the recoil pattern changes. Thats why you need a second Workshop on top to remove the remaining (new) recoil pattern.
I have a question, can i use a controller to play or i am forced to use mouse and keyboard?
What do you think?
Matrix supports both Controller and MnK and all of its features work with these input devices as well. So if you are a controller player then sure, you can use all XMatrix features including the workshop with it too!
@@XIMCentral Alright thank you
Is it possible to find the x,y values after doing the trace ?
Hey, what do you mean exactly?
Great video as always.
Setting up this in call of duty can be tricky though, you should make a video about that.
I´ve notice that recoil change the further away the enemy is even though the recoil seems/seemed good when you set it up.
CoD is not different to what is shown in this video. You spread out the bullets either via vertical modifier, or via manual smart action. Then trace them and adjust X and Y scaling. A second workshop is usually not needed for CoD, but can significantly improve the results if you want a truly perfect result. The issue you describe with enemies being further away is due to the aim assist slowdown. Aim assist strength changes based on the distance to the target, and therefore the slowdown also changes. I addressed how to handle that in the first workshop video! :)
Test it on the firing range on call of duty and you will see. When you shoot the wall which is close to you and have followed the steps in the videos it will be perfect however when shooting a wall at a medium to long range distance (with no aim assist slow down) it will rise more, I’m not sure what mechanic they have implemented into the game for this however it means it’s not perfect on cod.
I personally play with a recoil setting where the final target in the firing range will have no recoil with the slow down however if I shoot through fencing or panels my recoil pulls down too much as I have no slowdown. I still feel this is the best way to get an advantage
@ximcentral where exactly can i find the way to handle those enemies further away and the aim assist will change
@@govertkreuk4906 Its shown in the video from last week! :)
@@govertkreuk4906 Its in the video from last week about the Workshop. You use the Y and X Scaling.
Can you make a video on how to switch between weapons like a primary pistol to your auto rifle for example and have different bindings for them please?
Hey, i have already done that. Its shown at the end of this video + linked in the video description! :)
Question is that work for every gun or I have to do that separately on everyone
For every gun they all have different recoil patterns
Yea I already notice that cuz I still have the problem with other guns work shop is just for the one u using that’s sad 😔
Game developers usually assign different recoil patterns to different weapons. So you will have to address them separately. See the end of this video on how to do that in a very convenient way.
Hey do you know why do I have to start having the mouse trap again?
@@djosu13mara98 Hey, what do you mean? And have you followed the SAB Guide from the XIM Forum?
Do I need to follow these steps in Apex Legends or Overwatch?
in those games you can use the easy workshop setup from last weeks video! ;)
The Behavior simulation option on smart is turned on or off after completion, I'm talking about the option within behavior simulator, not the one below mapping. I ask because I don't know if it influences the mousetrap
Do you mean the variance percentage in the SAB settings? So the value at the very top in that menu?
It's a button that looks like a timer on the top right when you activate it it turns orange
@@filipeghiggi That is how you turn off the variance for that smart action. So wait actions do not have any variance anymore to make them appear more human (but instead use the exact wait action timings that you have specified).
After I finish the workshop, can I change the ads sensitivity in xim manager or in game setting? Does it affect anti recoil🤔
Yes you can do that, thats perfectly fine! Only the things shown in the Basic Workshop video cannot be changed.
@@XIMCentral thanks a lot, same as fov right?
@@alex-k4z8n FoV does have an effect, but its quite small.
So if I’m correct I can turn sab back on after I get done with the workshop
Yes!
With the new sensitivity cm per square, does this affect your previous video on calibrating mouse sensitivity?
It remains the same, just a different sensitivity value. Lower values result in a faster sensitivity and higher values in a slower sensitivity! :)
Can you try do wardens mpx? Ive tried multiple times following this video but it just gets worse and worse
Hey, i heard similar reports from other users. I can look into it but it might be that his recoil is bugged. Other operators had that in the past too, where the gun had not just one recoil pattern but several and each time you had a different one (Finka had it a while ago, Wamai a year or two ago too).
@@XIMCentral oh ok cool. Good to know im not the only one but definitely please give it a shot and see if were just bad or its broken
How come when i go to binding i don’t have all of the timer and all of that. And all of the buttons are only xbox not ps
Hey, did you activate the advanced mode in your config? Also it will always show you the buttons of the controller you have attached. If its a Xbox controller it will be Xbox buttons.
Struggling with switching anti recoils… im copying rml anti recoils and pasting but how do I switch between them? Only group A one seems to activate. They all come with left click mouse button. Do i need to make another keybind to every anti recoil and if i click that button then it switches to another profile?
Hey, for that see my "XIM Matrix Group Tutorial" video. One of its chapters shows exactly that! :)
so in the end everyone should have almosg the same results in smartactions right?
If you use two or more Workshops then yes!
Hey I haven't played with a xim matrix since initial release of it, I played overwatch and swapped back to the xim apex due to it feeling a bit "floaty" is how I'd describe it I thought I'd rebuy it and give it another shot would you say the newer firmwares etc has improved the feeling on overwatch? (That's what I've heard from others)
The upcoming beta firmware (not released yet) will fully fix that! Cannot say more but the results are insane! :)
@@XIMCentral Oh okay that'd be great if you can make a video about it once it's released I used to be in your discord but swapped over yt accounts I will rebuy a membership again once I get my new ps5/xim
@@ad6m. Happy to hear that and definitely let me know how you like the new XIM plus the upcoming beta firmware! All alpha testers are blown away by it (when comparing it to XIM Apex)!
@@XIMCentral Great to see them improving on it so fast can't wait how it is and if you make a new video regarding the changes, also mentioned this to my friend who's currently maining the apex over matrix right now on overwatch for this issue he'll be excited for the update too
@@ad6m. Yep such things as chaining a XIM Apex into a Matrix will no longer be required! :)
I have a problem after shooting at a wall for a few seconds, and the shots disappear. What should I do?
You can record a clip or take a screenshot. Ideally from a wall with a very distinctive texture or scratches, so you can later easier identify where the bullets went to when looking at the screenshot or clip.
How do you trace bullets in games where the bullets disappear after a few seconds
Take a screenshot or record a clip so you can check where the bullets went to.
Do you have any advice for PC users like me who aren’t getting that “perfect” recoil result. for me it is working but it’s not pixel perfect by any means (on Rainbow 6). When I try to stack workshops it doesn’t change the result much at all. I’ve checked the DPI values are matching and have mouse calibrated. any tips ?
Hey, this is usually due to the requirements shown in the beginning not being met. Such as ingame settings that dont match the XIM requirements, the mouse is not running on the DPI value specified in the XIM config, the sensitivity is just way too high or you did not stand still while doing the workshop. Any of these will distort the outcome.
@@XIMCentralYea , Im almost certain that I did all the steps correctly , but the problem for me seems to be when trying to stack the workshops the result doesn’t change much at all and even when I change the X and Y values i’m still not getting that perfect anti recoil that I want. Not sure if you have any other advice for me but thank you for your responses to my other comments anyways.
@@drel3003 Hey, that could indicate that some of the requirements are not met to get an optimal result. Such as your sensitivity being too high, you are too far away from the target, the bullets are not spread out enough, SAB is still active, ingame settings are wrong and so on. All of these will make it more or less impossible to achieve a perfect result.
Hey, funktioniert denn die Matrix nach dem Update oder nicht? Weil im RUclips zeigen die alle das alle Adapter inkl. Cronus Zen funktionieren nicht mehr und man kann damit nicht spielen!?
Matrix funktioniert ohne Probleme mit der PS5, und ja Zen, ReaSnow und Co. funktionieren alle nicht mehr mit der Playstation 5.
For some reason I did this and my when I shoot my gun only looks down and not fire any bullets
Because you need to reactivate your shooting button (see the voiceover for when its reactivated, its not shown in the manager video but only mentioned via the voiceover).
Can this work on ps5 using controller without mnk because I'm planning to buy one ❤
Yes absolutely, all Matrix features also work with a controller. In one week i will release the Controller Workshop tutorial video, its already in early access foir channel members! :)
@@XIMCentral got it I can't wait to use it I was just afraid that I need mk to use this device because I'm used to controller also does xim matrix work even with the new ps5 software update?
What about destiny2? Bullets won’t leave marks on the wall. Impossible to set up
Hey, take a screenshot or record a video of the pattern. Do it on a wall with scratches or a distinctive texture that you can later use to reference where each bullet went to. If neither of the two works then use the manual anti recoil setup as shown in my "XIM Matrix Advanced Anti Recoil Guide" video.
Hi, Is it possible to make a video with " Gears of War 5 "settings? Thanks
I have never played the game so far so i am unsure if i would create a good config for it. But you can probably find configs in the XIM Forum for it!
@@XIMCentral Thanks, I'll see. I tried to make a setup for "Gears Of War 5" but I couldn't. I hope you will. Thank you.
How long does it take to arrive in Portugal? O Will buy
Depends from where you buy (EU or US).
this is fucking nuts. cant wait to get one lmfao
Let me know how you like it once you got one! ;)
What is the best recommended DPI for XIM matrix
Like on the xim apex 3200
8000-12000 is the sweet spot!
Is it possible to create few different anti-recoil patterns and switch them in game?
Yes, you do that via groups. See the mentioned video at the end of the video on how to do that! :)
@@XIMCentral thank you. I found this video already.
@@БаркушаБарк The other alternative is to use one config per pattern and load the configs via config hotkeys.
@@XIMCentral Yeah, I thought about it, but it's not convenient in apex legends. Btw. There is a thing in apex legends, jitter aim. Is there any option in xim matrix to create something like this? I just purchased xim and made a lot of useful macro, but this one I don't understand how to make. Much appreciate your help.
@@БаркушаБарк Yeah you can do that. See my older XIM Matrix Perfect Anti Recoil video on how you would do that. You basically use a smart action with aim actions in it that replicate the jitter aim you want to do. The video shows something else but the concept and setup is the same for jitter aim.
Since it’s hard to get anti recoil on LMG could u do a separate video for it
Hey, what do you struggle with when doing it for an LMG? And do you really have a need to shoot say 100 bullets in a row? You must only trace as many bullets as you think you will shoot without interruption.
Please, do one for the ZK on battlefield 5! Cant get it as tight as you always gets.
Hey, if you are sure you have carefully traced the pattern then its maybe due to weapons way or your mouse sensitivity being too high. The higher the overall mouse sensitivity the less accurate the workshop will be. If in doubt raise your XIM sensitivity to something like 70 cm/360° and trace the pattern then. That way you get a much more accurate result.
how is your tracer on the app of visual mine ends up being 1 dot
Hey, see my Basic Workshop guide video on all the things that can cause that.
Can you do a complete walkthrough for rust console please👉🏼👈
I dont have rust but if i ever get it then sure. The steps would be the same as shown in this video though.
On this vedio are you using mouse or controller if controller why you have mouse pics ! Thanks
Hey, this was done with a mouse. I have uploaded a dedicated controller Workshop video.
Sometimes, the weapon sway makes tracing the bullet pattern difficult.
In such a case trace 10 pattern to basically remove the weapon sway from the equation.
when tracing the bullets you need to click the fire button over each one you said? won’t that shoot your gun though?
what if you’re using controller and want to make another workshop ontop but can’t bind to a keyboard?
Yes. And thats why you must deactivate all other fire actions, so your weapon wont shoot when tracing the bullets. The Workshop will pause the fire action with which you launch the Workshop. As for your second question, you just use a random controller button as a temporary group toggle that doesnt do much in the game. Say DPad Up for example. Once you got your second workshop result you delete the group toggle button again anyway. Also you can use modifiers if you run out of controller buttons.
@@XIMCentral hey i have a problem where even after clicking trace, it still shoots and wont register. all other firing buttons are removed too
@@sev7909 Hey, please follow the prerequisite steps from my Basic Workshop video? When those are not met the tracing wont work.
Some games out now have regular aim and focus aim, where you hit RB, for example, to focus your character's steadiness. Is there a way to bind a recoil control to that said RB/Focus aim button? If so, how?
You could create a second workshop when being under focus mode and have the focus mode button make your Matrix switch between both. Overall it may be easier to just not use focus mode but only run normal with a 0 recoil workshop result.
It actually didn’t do bad, thanks man. I’m in an uphill battle now with semi auto weapons.
Can I make a “universal” anti recoil that works with all my weapons? Of course it won’t be perfect for all but you know what I mean 😊
Since weapons usually use different recoil pattern this isnt possible. What you can do however is to use a light anti recoil effect that then works for every weapon. Like an invisible additional weapon perk. The remaining recoil must then be removed manually by aiming of course.
Just set up the workshop but I’m having trouble using it into a group. I wanna put the workshop recoil is it’s own group while still being able to regular shoot but it disabled the both and I can’t figure out how to disable that. Ik how to enable it with a button but I need the regular shoot😊
Hey, for that see the video linked at the end of this one. It will show you how to setup the groups so it works very well! :)
@@XIMCentral thanks so much. This device is awesome I couldn’t learn in last summer but I’m getting back into it. I’m happy you guys make videos for everything
can u use it w a controller and not just a mnk also can u have different presets
Yes you can and yes for the presets. See my Controller Workshop video on how to do it on a controller. As for the presets. see the Matrix Groups video shown at the end of the video.
Any idea when we will have direct pass through for the ps5 controller once more ? Its so annoying having to go into navigation mode to use the controller in game , I dont get why the change was even made in the first place ?
Hey, this exists since lots of months already by creating a "Controller (Smart Actions only)" config. That one is passthrough.
@@XIMCentral i will check it out , ty
Will it be possible to connect ximmatrix and ximlink in the future?
For now that is not planned, but maybe this will become a possibility in the future.
Hey there, so i have to use the generic xim setting for this to work?
The required XIM ingame settings are needed for the most accurate result. You can also use other ingame settings but the result will may not be as good anymore then.
ohh so is it only in game settings? or xim settings
@@whossheff Ingame settings. For your XIM settings you can use whatever you like the most! :)
Just got my xim and im popping off!! Thank you!
@@whossheff Awesome to hear that man! :)
At MW3 with 60 round mags it somehow gets a bit harder at the second half of the mag. So i always do some editing on the script after finishing. the first half of the mag is usually good but then i delete the second half in the script, and just add 175/185 degree angle myself myself on low magnitude and infinate wait. i test and adjust it, by testing on walls map Terminal, at domination spawn A. Works fine. Most of the time you dont spray 60 consectutive bullets on gunfights, so everytime i release the trigger, the script restarts on the next fire. For those really occasional moments the recoil pattern works well enough.
edit: i remembered works even better when you make a smaller patern at the workshop, with say 30 rounds max, and then add script for the rest of the mag on your own.
This is the kind of video you need to shoot, and not where there is a very easy return...
Siege has the most complex weapon recoil out of all games which is why its used for demonstration purposes. CoD is a lot easier than Siege, its just challening to find a good spot to dial in the recoil since the shooting range is rather bad.
@@XIMCentral i noticed my mouse inputs on the workshops looks different then the recoil patern on the wall after dialing in. is this all due to the weapon sway?
There are times when I'm playing and I stop pressing a keybind but it keeps pressing making it move on its own, why could this be? Could it be a factory defect? I'm using the matrix
Does it only happen with keyboard keys? If so it could be a low key rollover. This can cause your keyboard to get inputs stuck if too many keys are pressed at the same time.
@@XIMCentral yes I think that's it
Hey awesome video!
But i am getting a "Insufficient binding Capacity for Workshop " error. I followed your multiple profile setup video and you have over 12 workshop profile setup and i only got 8 and i am getting that error. I'm just setting up 2 recoil profile per gun Apex Legends, to get that ultimate recoil delete. Any ideas why im getting that error?
You must delete some bindings, you are exceeding the capacity. The XIM Team will look into expanding the capacitiy limit soon!
Can you use a controller with the anti recoil?
Yes! All XIM Matrix features also work with a controller! In one week i will release the Controller Workshop tutorial video, its already in early access for channel members!
Reached the second workshop step. Assigned a new binding on the left mouse button. Started the workshop again with "f group" active but when I try to trace again I got "binding that fire must be disable". Any suggestion please
You must set a groupm toggle to your first workshop with which you can activate/deactivate it.
yes done. Unfortunatly I tried with 4 workshop but can't reach a good antirecoli perfonmance. Thanks for your effort@@XIMCentral
In PUBG no way to get a good result
@@AuleSanPaolo Hey, are you sure you have found the most optimal X and Y scaling values before accepting the first and second workshop?
@@XIMCentralyes but probably we need a video for PUBG specifically because is a lot more difficult and tricky in understanding where and how is the best way in adjusting und using at the best performance the last firmware with this game. Unfortunately PUBG have a lot of randomization on the patterns and I think you are the best person how can understand how to achieve a pretty acceptable antirecoil.
Sooo were not gonna show how to do it for strictly controller? Ive tried using the workshop but it doesnt work, just says shooting keys must be off, so how we supposed to use them?
Sooo were not gonna check if this channel has already uploaded a workshop tutorial specifically made for controller players? ;P
Can you help when I try to update my xim it says I have the latest version but I don’t have the work shop
Same here
Hey, what firmware versions does your manager list you in the top right options (info/about)?
For Apex Legends, how can I make a movement script like ´siperglide´ or ´superjump´?? Is it possible that xim matrix copy my movement and captures it into a script?, I mean, like to record the input movements and then translate it into a script
A smart action recorder will come later in 2024. Until then just manually add the button sequence that needs to be performed for this into a smart action. Or use the community shared smart actions from the XIM Forum if you dont want to do it yourself.
I Need Help! I don’t have sound on my Headphones! XIM on PS5 with PS4 game👍🏼
Plug a PS5 controller to your XIM, connect the headset to it, and select XIM Matrix in the audio options as your source. THen it should work.
Doesn't it make it really obvious when you negate any recoil as much as this? Just curious if people mention it spectating or on kill cams. I personally don't like to take it as far as this as it just makes it obvious
Since you add aiming inputs on top it looks fairly normal. If you were to stand still and shoot at the wall it would look a bit suspicious ofc.
A question I’ve had for a while… I’ve just been using the default mobile app for xim matrix and if I upgrade to another firmware on pc and go back to my app it won’t allow me to connect to my xim. How do I fix this?
You need to update your manager as well. The link in the video description has the correct version.
@@XIMCentral okay thank you for the help
So I did the first workshop and tried to do the second one but when I go into the second workshop it still has my first workshop recoil it won’t spread using the 16degrees up thing
Hey, see the steps shown in the video with the groups and everything. Also listen to the audio as at one point i deactivate the second workshop by pressing the respective button (not shown but said via the voiceover). It sounds like somewhere during your second Workshop a setup error occured, probably with the group activations. So go through the video step by step again id say! :)
@@XIMCentral I figured that out but I still can’t get it to shoot straight far away also it struggles up close do you think if I send you a config through discord or something you can make some tweaks to it or help me get it straight I just got it 4 days ago and everything else is straight but this one has really bad horizontal recoil it’s the AK holo on rust
@@XIMCentral ngl I watch this video probably 30 times 😂
@@TelepathiQGaming Oh ok its rust. The issue with rust is that the aim mechanic is really wonky. So although you perfectly traced each bullet, due to the wonky aim mechanic the outcome will be slightly off. A second workshop on top can help, but i found it to be easier to just accept the first workshop and then manually adjust the smart action sequence wherever the result is off. So i basically do what i showed in my "XIM Matrix Perfect Anti Recoil" video by changing the respective recoil block that is slightly off.
do you have to do this for every gun?
If different weapons use different recoil patterns then yes.
do you need a mnk or can i just use my controller?
Both is possible with XIM Matrix and all features work with both too!
t's convenient to adjust in games where bullet holes don't disappear after 5 seconds
Take a screenshot or video clip in games where bullet holes disappear and use it as a reference to trace the location of the bullet holes.
I canf figure out the part where i can shoot after using the recoil work shop
Hey, what do you mean specifically? What is not working for you?
Hallo,
erstmal vielen Dank für deine Mühe.
Ich spiele R6 auf dem PC, sprich mit der nativen MnK Unterstützung. Ich habe versucht deine Anleitung zu befolgen, jedoch habe ich noch ein paar Fragen bzw. Probleme:
1. Kann ich bei den ersten beiden Workshops "ADS Only" setzen, damit ich im Gamemenü ganz normal Linksmausklicks ausführen kann?
2. Es macht bei mir einen erheblichen Unterschied, ob ich aus 5 Metern auf das Ziel schieße oder aus 10, 20, 20. Bei 5 Metern ist das Schussbild nahezu perfekt, aber je weiter ich mich entferne, desto schlechter wird das Schussbild.
3. Der erste Schuss landet in der Regel dorthin, wo ich hinziele. Die weiteren Schüsse landen recht komprimiert knapp drüber. Ich glaube das hat was mit der 25 millisekundigen Verzögerung zutun, die du empfiehlst einzubauen. Kann das sein?
4. Im Grunde ist der dritte "Hilfsworkshop" (in deinem Fall Key J) nachher überflüssig und kann gelöscht werden, oder?
Sorry für die vielen Fragen. :(
Hey, ja ADS Only kannst du benutzen. Je näher du an der Wand bist umso mehr Pixel musst du pro Loch zurücklegen was die Genauigkeit erhöht. Du kannst aber jede Entfernung nehmen.
when I start shooting at the wall, my sight stops in the middle of the clip and does not rise higher. How did you fix this game mechanic?
@@MrKemaev Use the vertical modifier to avoid this, or the manual recoil spreader shown in this video. The recoil stops because the game doesnt recognize any aim input.
@@XIMCentral can I put it in a negative value?
@@MrKemaev Yes thats possible! :)
Im trying to do the third workshop stack but it just makes the recoil worse. Im trying to do it for the rust AK and i dont know how to the 3rd one. Any help?
For rust i would recommend to only do one workshop, and then manually edit the smart action sequence to get it perfect. The aim mechanic of the game is so bad that the tracing will not 100% reflect what happens in the game. So manual editing is better than adding more Workshops!
What do you mean by manual editing
@@subybtw1733 Changing the smart action sequence of the anti recoil the manual way as shown in my Perfect Anti Recoil tutorial video.
Hey I’m having some problems my mouse is super slow for no reason I have the same dpi and a decent sens but it takes 5 mouse swipes across my pad to do one 360 how do I fix this?
Hey, please try the DPI Checker in the XIM Manager. It sounds a lot like your DPI changes didnt get saved onto the mouse memory and as a result are only active when the mouse is connected to the PC. So your mouse probably runs on a much lower DPI value when connected to the XIM.
Hey my friend, i need your help. İ just made the update after that my phone says connecting to xim matrix but stays like that. İn blootooth it shows connected but in app i cant do nothing becouse it stucks connecting screen. İ made factory reset still same.
Hey, please shut down your phone completely and start it again. That usually solves Bluetooth pairing issues. Then press the button on the XIM so it starts blinking and open your phone manager.
@@XIMCentral i tryed it olso didint worked. İ dont know what to do.
@@XIMCentral also i tryed with another phone and ipad. Nothing connectüng every device same..
@@artofairgun Does your XIM start blinking in a light blue colour when you press the button on it? And it cannot find your manager in that state then?
@@XIMCentral i guess found out from the forum. İts becouse ios put limit this beta version. So i can not update from any ios. So my xim matrix is last version becouse of this i cannot connecting. Do you have a idea what should i do ?
I have an issue on dayz I use rb as a radial button and in the game if you hold down LT to aim you can use lb to lean left while still using aim down sight gyro motion. When I go to use the lean right rb and gyro motion it does not work because the rb was assigned as the radial. Is there a way to make the right lean rb work with gyro motion or would I need to make a group for that?
Hey, id say dont use the radial role in that case and instead place a smart action to this button that uses the sensitivity multiplier action, or even better the turnassist action to boost the sensitivity when in this radial menu. Turn assist works similar to the radial role (while not using an actual radial role).
@@XIMCentral thank you for the knowledge and quick response.
I’m gonna have to watch this a few times lol
For most games you wont need to do this, instead use the simpler solution from the workshop video i uploaded last week! :)
@@XIMCentral for cod o may need this one. The simpler version does a good job, but the cluster isn’t as tight
@@getdestroyed1958 Yes in that case use the workshop stacking approach from this video! :)
@@XIMCentral I was thinking about this for a future smart action for removal of bullet spread. instead of tracing the bullets vertically, you unload 3 magazines that is being controlled “recoil compensated for” and the outline of the cluster is traced, the smart action would then configure on the backend how to get it as tight as possible. Or what I’d like to call a “lazer”
i have a question whenever i want to get into the workshop i get the notification “disable simulate analog behaviour to use workshop” how can i do that
Hey, this is shown in the first video of this series, the general Workshop Guide video! :)
Why does my result always shoot in every direction I’ve been following the steps I can’t figure it out please help
Hey, are you sure you followed the requirements from the beginning? Otherwise the workshop result will always be off.
How do I fix it when it says get rid of fire button when I have the same button as you
Hey, thats explained in the Basic Workshop video in more detail but you basically need to deactivate additional fire bindings.
Why is the workshop button not popping up? I just got my XIM Matrix in today
See the video description, you must update both your XIM Firmware and the Manager.
@@XIMCentral Yea I updated it but my sensitivity feels weird and I suck on MnK hopefully I get better
@@nwiko Sensitivity scaling has changed so so you will have to readjust it.
Workshop is really good I like it thank you.
Thanks for the feedback!
Everytime I click on the smart action button it just disappears and does nothing any suggestions?
@@Vloir Hey, what are you trying to do and what exactly doesnt work?
@@XIMCentral appreciate your time and your quick response
So I update my flash firmware and manager to the workshop update. It ends in like 114 or what ever the one linked into ur RUclips description .
So I update it and it goes through the yellow lights to confirmed it’s savings then the rainbow start up lights
Then it just pulses red and when I try and connected to my console same thing just red pulses I tried factory resetting but it dosent work
When it’s done updating ,still plugged into computer after yellow lights and rainbow. it just start flashing red .Instead of pulsing white to acts as pair mode
How does anti recoil even work for rainbow six siege? When you use different operators they all have different guns and u can only choose primary and secondary with two specific guns not loads.
You use groups for that. Each group covers one primary and secondary loadout. See the video mentioned at the end of this video on how to do that! :)
Hi. Since yesterday, we cannot play xim Matrix Rainbow. Neither the PC method nor the SAB method works
Hey, SAB still works for me. Are your values maybe too low?
I keep having inconsistencies. I’m trying to make a setup for Warden. I’m on my third workshop created, followed the steps. Grouped the first two to be toggled on by J. On the third workshop, the recoil just keeps jumping down to the left. Some will be rounded circles but then the next magazine will jump left.
I initially made a profile for Twitch and that worked perfectly fine with just one workshop. Not sure how warden’s mpx is more difficult?
Some weapons in Siege have a recoil bug where the pattern can change a lot. In that case use different weapon attachments, that usually solves the bug.
@@XIMCentral Thank you for your help, I’ll test it out
@@XIMCentral I still can’t get a decent result for the MPX. I’ve experimented with different attachments but still seems to not work where my other weapons have. (F2, MP5, Buck’s Primary, Mozzie’s Roni, Jager’s 416-C)
And I’ve done 10-15 traces for the MPX and still doesn’t help the accuracy of the workshop.
@@veetz.- Hey, are you sure its not randomized recoil that you experience? The MPX has quite a lot of randomization actually. Also verify if your ingame settings are correct as well as all the other recommendations from your video. Otherwise the workshop result cannot be as accurate as possible!
@@XIMCentral I mean would the randomized recoil prevent me from creating a workshop for the MPX? It’s just weird, let’s say I get the X and Y to .32 and 1.01. Most bullets will be mostly centered and then it’ll drift to the left, and then if I change the X to .31, then the recoil will go right. And sometimes I’ll get a well rounded centered result. Then the next magazine drifts (where as most of my other workshops I haven’t had that problem, excluding the MP7, another problem). And the thing is for the MPX, I’ve gone as high as doing 12 traced magazines (which seems like overkill but should produce good results) and it hasn’t worked out for me.
My set up should be fine. All my in-game settings are the same, excluding the FOV (which mine is 90). The ADS is 50, all advanced options are at 0 and disabled. When I do the workshop,
all smart actions are disabled except for Q/E leaning (which lmk if I need to disable it). And my fire action is inactive as well. I make sure I do not move and stay still the whole time while in workshop.
But lastly, I’d like to thank you for all your help because I’ve been subscribed for quite some time now. I’m not upset that this isn’t working and I’m not trying to take it out on you. Just trying to see if I can get any insight for the future, thank you brother.
Does this work for Rust? If yes could you make a Video?
Yes it works for rust and what is shown in the video is exactly what you must do in rust too.
Is there a way to do seamlessly swap between saved gun recoil controls mid match? My xim is on its way so I can’t test or anything yet.
Yes there is, see the video discussed at the end of this video on how to do that! :)
@@XIMCentral I’ll check it out, thank you for the help and wonderful tutorial!
@ximcentral you make great videos for workshop and recoil! keep up the good work. now can you please do at least ONE video doing recoil workshop in call of duty? i have not seen a workshop video for COD yet.i have only seen videos for rainbow 6 and overwatch. thanks in advance
CoD is no different. You just load the Shooting Range through your favourite weapon loadout, then make a 90° turn to the left or right, and then shoot a magazine into the white wall in-between the weapon stacks. Then you trace those.
How do you do you fix it once u turn sab back on it has a delay before the anti recoil activates
Set the Trigger SAB to 0 to avoid this.
Hello or a question about the part of the video you say that xbox players can do without dj add a smart action manually, and use vertical modifier but in what sense?
I’m wondering the same thing, when I tried it for twitch I used +25 tho and it worked good.
The resolution around the deadzone on Xbox is 256 times larger so you can just use the vertical modifier instead and set it to say 12,00 instead of using a manual smart action recoil spreader with 12,00 deg/sec.
But then I use the vertical modifier I don’t need a manual smart action?
@@lukelol7735 you can just use the vertical + no need for the smart action on Xbox
And instead of 16 I have to put 12 or 25 for xbox ?
in rainbow six siege when i make a configuration for the smg-12 it does not work properly. when i shoot about 3/4 of my mag the rest of my bullets act as if they do not have a configuration
Thats because those are randomized. Each time they will be different. You cannot remove that, only recoil that follows a clear pattern can be removed.