It does not allow you to enter any forum or update the gym. We are from Brazil. We are 79 players with Matrix and we get that we cannot enter the page. It tells us that you are out of reach.
Hello! I have a question. What actions do I need to assign in the matrix so that when I click on the Dualsenses D-PAD left it switches to a semi-automatic weapon with Rapid Fire and when I click on the D-PAD right it switches to an automatic weapon with normal shooting. What actions do I need to do in the xim matrix (assign groups to these weapons or set a switch)? Thank you in advance for your cooperation.
This video actually taught me a lot. I see now there is a lot i can do with these new group changes for my ops in R6. This video was much needed. Thank you and great work!
Dude thank you so much The official xim videos Don't really go in too much depth so your channel has taught me so much.... If I weren't so poor I'd give you some money my friend. Thank you for your time and hard work I sincerely appreciate it
Aber ich glaube wirklich das du eine Patriot oder PayPal einrichten solltest damit man dir eine Spende machen kann. Menschen sind so dankbar und fühlen sich einfach besser!
I’m going to second this. I’ve had to outsource to the community for a better understanding. No tutorial videos, no instruction videos, and more often then not, people just ask to copy config codes rather than grasp a deeper understanding and build their own. Takes the fun out of the builds with the frustration that comes along. Yes instructional videos help but limited to explanation. This is the most informative video thus far. I’ve own the matrix since the first set were available to community.. it still collects dust because I can only give an hour before I give up and revert back to my xim apex. (I’ve owned xim since xim4)
@@XIMCentral understandable! It would be beneficial for even just a picture of what each button in the UI represents and an “example.” The community is a great source to help resolve issues and it’s because of the community the xim remains as successful as it is. Don’t get me wrong, what is built on a technical standpoint is second to none, but without others to help and give feedback, it might not have done as well. I’m hoping to retire my apex soon and just use my matrix. I’m still struggling with a couple features I can do with my apex that I can’t build with my matrix. This video does help point me in a better directions. Thanks!
@@shawnhillis5829you can’t join a small community of cheaters and then get mad that the cheating is not easily accessible, this page actually helps a lot and if you don’t find it helpful figure it out yourself
When I go to create a group and hit the "cycle groups" option, the only two choices are "next" and "previous" there are no "set" cycle options? how do I fix this?
@@joefig55 You use modifier keys for that. DPad Up would be the modifier in this case. Then you use cycle set only groups as shown in my Matrix Groups Tutorial video.
@@XIMCentral yes, I want to have a primary and secondary gun inside of one group, for example when I press 2 on my keyboard I can have rapid fire on dokebis dmr and anti recoil in the smg-12
my monkey brain hurts. I get confused around the 9:20 part, i have my "2" key bound to two different loadouts but when i press it nothing seems to happen. is there a video that goes into more detail about setting that up. please help
Hey, what do you mean you have set it up to two different loadouts? How would your XIM know which of the two loadouts you want to have specifically? Or what do you mean?
@@XIMCentral@XIMCentral so I have 2 groups made, named "1x scope" and other "4x scope" both are recoil presets. I tried making a "set" with the enable group "1x scope" and disable group "4x scope" which i bound to my "2 key". I thought this is what you showed in the video but I must be wrong because it's not cycling between the 2 groups
@@nicholasgotte3809 Oh ok i see. So lets say you created a cycle set (crown) with two groups inside the set. The first one is 1x scope, the other one 4x scope. So by pressing 2 you load this set. You now need a button that cycles through this set. In my example i use Q = switch weapon. By pressing Q you will switch back and forth between 1x and 4x. You can use any button for switching, just assing the "Next" feature to it.
Hey, its a bug with the current alpha firmware that doesnt automatically activate the first group A. A fix will be out soon. Until then just manually activate group a via a dedicated button binding.
You would use modifiers. Say DPad Up = the modifier and then any additional button you press does the cycling or group loading. Or you connect a keyboard to your XIM do to the group handling.
Hello, Apex Legend does not work when I copy the shared settings. The keyboard key is firing, the mouse is not moving. Please help, while XIM Apex was playing fine, XIM Matrix was disappointing.
Hey, make sure to deactivate the Nav Mode as that will prevent your mouse from working. See the XIM instructional videos from the XIM website for more infos on that.
Ill have to rewatch the video and see but anways, How do you have two anti recoils active at the same time and work separately when you switch weapons? I'm trying on R6 to switch between the main gun and switch to a pistol with rapid fire smart action,
Hey, thats shown in the last chapter of this video with the cycle set. It allows you to bundle anti recoil groups and switch though them (with for example via your switch weapon button). This can be used for the example you have mentioned.
So if i want to use multiple weapon recoil groups in Apex Legends i just use your method like you did with the crouching? For example button 1 is default, 2 R99, 3 Flatline en so on..? Ofcourse you need to know which button is which gun. Correct?
Great tutorial! I feel like we need more groups honestly and i understand we can also use more configs to double the groups but i feel like it can all be simplified if there were more groups . Still tho the matrix is fire no matter what 🔥 complex yet rewarding when you get it down 🔥🔥🔥
I’m trying to create another workshop binding to my left mouse click and the manager is saying “insufficient binding capacity for workshop” I only have 9 any help ?
Hey, you have maxed out the maximum amount of bindings. Either delete some bindings and smart actions, or create a second config to store additional Workshop results in it. Later in 2024 the XIM Devs will explore possibilities to raise the binding limit.
hello!! i’m trying to create a smart action on the ps5 that opens the playstation keyboard, but whenever it’s on the screen, no inputs will register. i’ve tried r2 to press done, o to close it, d-pad/analog sticks and x to manually close it, nothing works except home button and share. what am i doing wrong?
@@XIMCentral thank you for your response! i’m currently not home, but can you do that in the setting where you choose which input/output to use and connect the xim to a playstation account?
i don’t really understand. whenever i change the output in connection method to mouse and keyboard, the xim matrix disconnects from remote play entirely and i can’t use it
@@witchlocked Thats to be expected because you go from Remote Play -> native MnK. Nothing works in MnK mode because you havnt bound any keys yet. You would need to bind Keyboard K = K, Keyboard J = J and so on in order to use those. It may be more comfortable to just use 2 configs that you switch through. One for Remote Play and one for native MnK with all keyboard keys being bound inside it.
I watched the video sure but what would be the best option for a battle royal? Where you have to pick up guns and it’s not a preset class for primary and secondary
Id go with different configs and groups. Say its Apex Legends. Config 1 is set to hotkey X and covers all weapon combinations of R99 + whatever via dedicated groups. Say R99 + Flatfline, R99 + R301, R99 + Shotgun and so on. Then the second Config 2 is set to hotkey C and covers all combinations of Havoc. So Havoc + Flatline, Havoc + R301, Havoc + Shotgun and so in. So all you got to do in the game is load the respective config via hotkey, and then select the group of the exact weapon combination you are using. So with 2 button presses you always have the right setup.
Ich raff nicht wie du das mit der sekundärwaffe machst. Wenn ich Dreieck drücke passiert entweder garnichts oder die Waffe lässt sich nicht wechseln Ist es möglich über die Revert Gruppe durch alle Gruppen durchzugehen mit nur einem hotkey? Irgendwie war’s mir da zu unübersichtlich
Hey, ja das wäre möglich. Wie sieht denn dein Setup aus? Die Idee ist ein Gruppenpaar zu erstellen. Z.B. per Taste X lädst du das Gruppenpaar Hauptwaffe 1 und Sekundarwaffe 2. Sie zwei Gruppen haben ihr eigenes Anti Recoil und/oder Rapid Fire. Per Gruppenpaar-Wechsel-Taste wird dann zwischen diesem Paar hin und her geweselt. Das ist im Idealfall deine Taste mit der du im Spiel die Waffen wechselst. Sprich drücke X um das Gruppenpaar für dieses Loadout zu laden, und danach wechselt dein XIM immer in die richtige Gruppe aus dem Paar wenn du die Waffe wechselst.
@@XIMCentral aktuell hab ich nur no recoil und das per revert gebindet, sodass ich per klick zwischen den Hauptwaffen wechseln kann. Aber sobald ich die Wagen wechsel kriege ich es nicht ausgemacht. Mein Plan ist quasi das sich per Dreieck für die jeweilige Gruppe das Recoil Script umschaltet und ich keine Einschränkung auf meiner sekundärwaffe habe.
@@Billigmarke Revert funktioniert auch, dazu musst du aber immer die entsprechenden zwei Recoil Gruppen hintereinander laden. Siehe dazu mein Video was ich vor ein paar Stunden hochgeladen habe (ALGS Apex Legends config video). Da zeige ich wie das mit Revert geht. Sonst einfach das machen was ich im vorherigen Kommentar geschrieben habe mit der Cycle Set Funktion (wird auch im letzten Teil dieses Gruppen Tutorial Videos gezeigt).
i don’t have the coloured buttons like the set and next button and i need help. also when i swap my weapon to secondary in hopes for rapid fire but it just goes to the next cycle
Hello I really appreciate your videos i just bought a matrix and they helped alot. But it says i have reached the max bindings even though i have less than have you have?
hey, how can i make it so i can only use one bind on my controller ( left dpad ) to scroll thru and activate all my groups instead of needing multiple binds
Use a modifier for that. When the modifier is held, you switch into a brand new controller binding that doesnt affect your game. So you can do DPad down + right trigger = group 1, DPad down + left trigger = group 2 and so on.
I followed all the steps in this video and the smart actions but when i press my bind to change weapons it cycles down to my other anti recoil configs instead of my secondary weapon
You can but all your recoil settings into one cycle set and then cycle through them with one key. Or you use a modifier to basically double your keyboard bindings. So holding down for example key x + any other button loads a new recoil setting.
I’m having some issues with the groups. I have two groups, normal fire and auto fire. Sometimes in the middle of a game it switches to a auto fire group automatically and I can’t switch it back to normal. The auto fire stays even if I delete all settings of auto fire. This is really strange and I have to restart the console and XIM matrix to reset it
Hey, that sounds like something is off in the group management. Check the activations, something in there must be set up in a way where you can run into a one-way path where you cannot get out of anymore. Also reloading your config or switching back and forth from a different one will reset all groups (or you setup a button within your config that resets all groups).
Use a modifier id say with a button you do not need. Say DPad up is the modifier and then with X, Circle, ... you switch the groups. This will avoid you from sending unwanted commands to the game as the modifier when held will suspend X, Circle, ... from sending their normal game action to the game.
@@drbnasty_8573 I meant there is an overlap within your bindings = a binding conflict. If you ping with key XYZ and switch groups with key XYZ then of course both have a conflict. Use individual buttons for each of the two.
Hello can you help me so I followed everything in the video and I'm having trouble getting the the pistol to shoot in rapid fire. Basically if I do everything you do and etc the primary works perfect anti recoil is perfect and the pistol will shoot normal. When I go to my bindings/mappings section I noticed that your R2 button is not shown on the screen ( if it were it would have been made the the 2nd binding listed at the top) so I took my mine off as well and bam the pistol works and shoots rapidly but when I switch back to the primary gun it won't shoot and goes straight down (anti recoil). Basically how do I get the pistol to shoot rapidly and to be able to use my anti recoil for my primary as shown in the video lol
I have everything layed out perfectly. The anti recoil and pistol is binded up in a group and I have my switch weapon button grouped up with the "next" binding just need help figuring out this issue with the guns not firing. Once I assign R2 back on the bidings the primary works and then the pistol goes back to shooting single again.
Hey, your weapons should always be able to shoot in ADS mode when copying this. What the shown config is missing is a HIP binding that allows you to shoot. You can add a regular HIP shooting binding to all anti recoil groups except for the rapid fire group to solve this. You cannot add it to the rapid fire group because then this binding will prevent the rapid fire from working.
Not sure what you mean by hip binding but what I did was just added a R2 fire button to every anti recoil group like you said it works.. And Thermite is my favorite character anyway I can get you to make a config code for him and his primary gun pleeeease! :D @@XIMCentral
@@MartialMadnes That also works! :) Thermite uses the same recoil pattern as Castle and Frost i think, which i covered in one of the two Siege recoil videos in think!
@@XIMCentral Really this time the last question but um so I also play on Xbox is their a config for xbox? I don't know what numbers to put the magnitude to for each opp and theirs only 3 xbox opp codes that were posted :(
You explain this very well. I did set up my settings, but when I activate my anti-recoil, I cannot shoot my gun. My group shows active, but the recoil script doesn't work. I'm not sure how to explain it better. And how to make it work ! 😅
Have you maybe bound it to ADS only? Alternatively just bind a second fire action, or add a RT100% binding to the start of your workshop result. Normally it should already be in there by default.
I have to say, you're the best! Even though you do this part-time, you manage to respond to everything. It's really kind of you. I managed to find and resolve the issue.
I just figured out I can connect my ps5 and xbox series x controller to the xim matrix. But how can I add smart actions to R2/RT for no recoil like I can on mouse? There's no option to add smart actions.
I made those group they work fine, but 1. i noticed i cant use example Maverick ability correctly because it keeps pulling the ads down and it doesn’t fire when 2. If i decide to run any other operator thats not a part of my group they cant shoot and when i put an extra R2 in then the fast shooting on the pistol goes away
You need to add shooting actions to your anti recoil bindings so you can always shoot. That way you also avoid the pistol issue. As for the first issue, when you use the torch your XIM has obviously no idea that you are using it as it gets 0 feedback from the game. So ideally bind another shooting button that doesnt trigger any anti recoil that you exclusively use for the torch. Or you setup a button to deactivate the anti recoil when using your equipment via groups.
@@MUMU--cc1cv Hey, as i said you will either have to bind a new shooting button to not trigger your anti recoil when using the torch (difficult on a controller due to limited amount of buttons), or you set up your groups so that the cycle gets deactivated when you switch to your equipment torch and gets activated again when you remove it again. Another option is to just not use a rapid fire setup for your secondary when playing Maverick as that allows you to use your pistol setup for when using the torch. At last, you could also set your anti recoil to ADS only and just not go into ADS mode when using the torch. This is probably the most easy and straight forward solution and doesnt require much adjustments. The general issue remains though, your XIM has no idea what is going on in the game so you will have to juggle those cases for your XIM by setting it up accordingly.
Hey i just noticed u have 2 of the same inputs as an example when u use ur primary weapon at 10:45 there is 2 “ace pr” activated how is that? I only have 1 what did u do to get a second one and whats the difference
is there any way they'll ever add more groups? i use a lot of different operators and cant get all the anti-recoil settings i want in the limited groups. as of right now i am only using group bindings to my most popular operators and an all-around recoil that helps most operators.
Later in 2024 this will be looked into. The Dev Team is currently working on a few other, more important features that see more demand within the XIM Forum. In the meantime you can use several configs to have access to more groups. Switch through them with config hotkeys.
@@XIMCentral i appreciate the speedy reply🙏🏻 and what do you mean? is there a way i could access more groups? sorry for any questions i may have i am very new to the xim matrix
@@falloffsss You would use a second config which allows you to access another 7 groups. Load it via the hotkey functionality, which makes it work like another group with 7 sub groups.
You mentioned in a comment there is a way to assign groups/recoil cycles to guns not just keys for example if I pick up and hold the r99 in apex it automatically switches to that recoil control pattern is this possible and if so could you point me in the direction to get this info I’d appreciate it
Hey, can you explain your use case a bit more? I think what you are looking for is the last thing that is shown in this video, unless i missunderstood you.
@@XIMCentral I appreciate the reply but to keep it simple is there anyway for the game for example apex legends to automatically recognise and switch to the correct recoil patterns I have configured for each gun I pick up or switch to without having to designate key binds?
How on earth do I set up a separate config inside of a certain game config? Like I want to set up a separate flying configuration for battlefield 2042 that I can change back and forth to at the press of a button
Hey again, i noticed when i fire a full mag and i keep holding L2 & R2 while it reloads it looks down.. And while reloading if i also hold R2 only it also looks down, how do i fix
Your XIM has no idea whats going on in the game. So by continuing to hold down your fire button your XIM continues to keep the anti recoil effect active. But since there is no recoil anymore as your weapon is empty it moves down your aim.
Yes absolutely! I would suggest to use modifiers for controller players. Say you hold down DPad Up as your modifier, and then press X to load group cycle 1 for example. That way you do not need to connect a keyboard to load all these profiles!
@@XIMCentral Sorry for such a late reply back buddy , I've had my three little ones and this is the first chance I'm getting to get back to you . Fantastic stuff mate , really appreciate that, I will give it a go and I will let you know how I get off . Thanks so much ❤️
@@XIMCentral Hi buddy , If I set my primary gun up perfectly , As soon as I put that gun in a group, I have zero recoil again ? The same thing happens if I try to set my primary up first , then deactivate. And set up the secondary weapon , When I go to activate both , zero recoil on both again ? Not sure what I'm doing wrong. Any help or tips would be greatly appreciated 👍
@@bamz2144 Hey, are you using the setup shown in the last chapter of the video? That one is the best to bundle a primary and secondary weapon group together. If not let me know how you have set it up! :)
@@XIMCentral I'm not sure if I'm honest I will rewatch the video over , and see if I can see what's going wrong my end . Thanks so much mate , I will let you know how I get off 🍻
So how would I do it so if one game I pick a volt and hemlock in apex and the next game I pick up a volt and r301 and load the recoil for each without messing up the other
hey, i’m wondering if the razor huntsman elite and logitech g203 mouse will work with xim matrix? i heard the matrix might not be able to power too much rgb.
I havent heard of any of these to not work, but yes powerdraw issues could occur. In that case either connect an external power supply to your XIM (such as a powered USB Hub) or turn off the LEDs of your devices.
Its the very same setup with no difference. You just bind it to a controller button of your choice. Ideally use modifiers so you can hold down DPad Up for example as your modifier, and then you can press any button on your controller to load the group without doing some random action in the game. Say DPad Up + X loads group 1 and so on.
Yes there is! Its the same setup as shown in my Shaiiko XIM Apex video, you just use a smart action instead. Might make a dedicated XIM Matrix video about it soon!
Can I make it so when I use scroll wheel down (which I use for switching weapons) to go from primary then scroll down to swap to the secondary and also active the group for the secondary then scroll down again and deactivate the secondary and active the primary?
I tried the combination dpad up + triangle on dualsense, but the problem is that the dpad up button is already used in the game, if I assign it I can't use it in the game
Use a button that has no real purpose in the game instead then. Such as statscreen or those things that you dont mind briefly being open when holding down your modifier. Or completely delete the binding from your binding list to not trigger it.
@@XIMCentral thanks for the answer, can you also tell me how to make it so that I can disable all anti-recoil bindings so that the behavior in the game is by default?
Have i understood this video correctly if Group Cycle is the easiest way to swap between different Anti Recoil Smart Actions for different weapons in Apex Legends??
Hello, I am having problems copying the shared configurations. When I choose the game I will play, I am asked to choose what I will play with. Since I play with keyboard and mouse on PS5, I choose keyboard and mouse. What should I choose
i followed the steps for the sets where you swap anti recoil settings but i just doesn’t work when i press it? do you know what i am doing wrong or should i try update the xim
i’m trying to do the rust recoil and for some reason when i’m like close it’s like pretty good but when i go far it’s start to not work like it goes for the most part side to side do you know what going on ?
Hey, the longer the distance the more apparent minor anti recoil inaccuracies become. I would say create another Workshop on top of your existing one to fully remove the last few recoil outliners. Then it should also be accurate on range! :)
Very cool video, it was very informative congratulations, Xim Matrix is a monster. Could you share your mapping configurations and smart actions that you showed at the end of the video?
Nice to hear that! The config used in this video is the same one as the config from my "XIM Matrix R6 Config" video! It just includes the anti recoil smart actions from my other R6 tutorial videos for demonstration purposes! :)
You would use modifiers. Say your modifier is DPad Up. Then tie the group activations to DPad Up + X and so on. That way only DPad up will be lost and wont have any ingame action while all other controller buttons remain useable.
For that see the last chaper in this video. You use two groups, A and B. Your normal non-anti recoil shooting button is bound to group A = primary and auto loaded. Your group B is activated via a cycle set when switching weapons and contains an anti recoil for the secondary. Its basically the same setup shown in this video but you dont use anti recoil for your primary.
@@XIMCentral alright thank you i will test it out maybe i will understand it better cause im trying to set it up to do a sequence of button presses like combos just got it today going from xim apex so im excited to test it out and ur channel has been a life saver for years now, keep up the good work
@@nuggis Its actually quite easy to setup. I recommend to check out the smart action chapter in the XIM Manual which goes over such basic things. My videos usually cover more advanced things, so the manual might be the way to go first (and also sufficient for your planned project).
@@XIMCentral yeah i just finished it i understood it but it seemed like a tedious process to setup the groups, like apex had so easy setup process i will rewatch it multiple times maybe i didn’t understand it completely🤣
@@nuggis Yeah this became a bit more complex but in return other things are far easier to setup with Matrix. You can also go the easy route and just use several game configs that you load via hotkeys. Each game config is like a sub config then.
Od1n i got a wooting keyboard set it up and if i want to use analog movement i make a mouse and gamepad config then select wasd movement on the config?
@mathialba when you make a mouse and gamepad all the buttons aren't binded to anything and I can't move around until I click on the left stick and select wasd movement
@@ferzahfy5196 A Mouse and Gamepad config wont come with pre-bound keyboard keys. So you have to manually add those. What you described is therefore to be expected when selecting a Mouse and Gamepad config.
@@ms_tf7579 Then its a powerdraw issue, your devices need too much electricity. Either reduce the load by turning off LEDs, charging the controller and such or add an external power supply to your setup.
yo my anti is being really weird. I am using qurkkys settings and i tried to just adjust ur anti reciol values to work but i’m at 2.97 and it goes up and then 2.98 goes down.
My anti recoil values will only work if you use the same settings as me. If you use the ones from someone else you will have to adjust all smart action magnitudes.
Ok I know I ask a lot of questions and I apologize. I set my xim up and it felt amazing! I’m a wrist mouse user not arm. The next day I log on and the sense was dramatically slower out the blue without me changing a thing. Is this a bug?
@@Ripper_J Oh you got the sensitivity bug then due to using non-default advanced settings. See the XIM Game Settings topic on how to solve the issue! :)
@@Ripper_J Advanced settings must be set to default values and then deactivated. On some consoles setting them to 0 doesnt equal default. If in doubt reset your ingame settings to have the default ones again.
Hey @XIMCentral My xim started actin weird ever since I plugged my Xbox Scuf controller in with it. Everyone I plug it up my Xbox, it’ll turn on then start blanking white in bursts repeatedly and won’t work. But it doesn’t do it when I plug it into my laptop. I factory reset it and updated firmware to the latest multiple times but it still does it. Any fixes?
@@Haunttts yea the scuf elite controller might have been the prob but I no longer try to use it. No matter what I plug in the matrix, it’ll always start blanking in white bursts and don’t work
Leaning is done through the same buttons that you use for melee and sprint. If in doubt always chekc the ingame controller layout to see which button performs which action.
@@XIMCentral i’m also having a problem with binding multiple recoil control configs can you make a video going a little more in depth on how to have multiple bindings for different recoils for ops ?
@@fearvon9374 Hey, this is what the last part of this video shows. You use Cycle Set Groups that load the respective group combinations that handle one operator each! Id say for learning purposes just redo the example you see in the video but with your own smart actions. Then cycle through them.
@@XIMCentral i have all my sensitivity situated but now i cannot get them into that red cycle mode with the crown so i can press a key and switch through primaries not sure why
@@fearvon9374 Hey, id say create a support ticket in the XIM Forum together with screenshot son how your bindings look like now. That would help to find the issue.
XIM Apex isn't being produced for like 3 years now and won't return as the components cannot be sourced anymore. It's successor XIM Matrix is out since a few months now.
I’m sorry for bothering you but it’s just that I recently learned about the xim and it’s so good all my friends have it and I wanted to get 1 I should’ve bought it from last month but not sure which 1 to get
I own all your products. I decided for myself that I would like to play on a gamepad, I really like the hyposcope on the xim nexus, but the sticks of all the gamepads are better and the dualshok 4 is what I’m used to, but the hyposcope on the nexus is better. are you planning to update nexus ll☺️?
That is something the team would like to explore in the future actually! :) If you prefer the DualShock maybe give Matrix + Dualshock a try, it lets you use the gyro too. The gyro module isnt as good as the one from Nexus, but maybe it still plays good enough for you! :)
For me everything works fine except for when I try to swap to my secondary I can’t get it so just active my rapid fire it just goes down the list of my anti recoil every time I press it
Hey, did you assign a cycle next to your "switch weapon" button as shown in the video? You can have it switch into your rapid fire smart action then to activate rapid fire for when you are using your pistol.
Very informative video! great work. I was wondering if you could make a video, ONLY explaining how to group primary weapon recoil setups and how to switch between them? ive gotten as far to make a recoil file, but im stuck trying to make a recoil file for all my primary weapons and group properly. keep dropping that good information brother!
Hallo unzwar wen ich anti recoil einstelle habe ich aber auch anti recoil auf der maestro gadget cam und z.b auf def twitch drohne wie soll man das wegbekommen LG
i cant even figure out how i make it so i can make more than one anti recoil script thing into one conig cause i when i try and make it so that i have more than 1 shoot bind it just makes me not able to shoot
@@XIMCentrali have figured this out i just need to know how i can have my primary out and have anti recoil on it and then switch to primary and have no recoil on it
@@XIMCentral hi thanks i figuted that out but when i do anti recoil i use to many actions so i cant bind rt at the star t of everyone i assume this is something that cannot be fixed
@@AbigailAudrey-q4v The next firmware will increase the limit, but until then you could just create a new binding to the same key/button and place RT100% to it.
Its a Shaiiko peek smart action, will probably cover it via a dedicated video soon. My Matrix is already on the upcoming beta firmware so the copy and paste code would sadly not work for you. The firmware will be out very soon though!
This is a great channel and you are a masssive help to the community! Ive just purchased the matrix and im having a few issues trying to figure out group bindings, i have everything set, but within my group both are active at the same time and not cycling, which would be counter intuitive to having 2 sets of recoil for 2 weapons at once which would lead to some wonky behaviour with the weapons, if i could share photos to make things a bit bit simpler to understand i would, Im 90% sure ive set everything up correctly but for some reason the groups arent toggling for one to the other 😞
Hey, have you updated your XIM to the new firmware? Also check that you are using cycle set instead of cycle as otherwise active groups remain active when activating the cycle.
Maybe the matrix isn't capable of doing what I'm trying to achieve, I have key 7 as (the same as my load out) to move into my group bindings which has an anti recoil adjustment for the HRM and one for the SOA, I've grouped them but they don't switch and are both active at the same time, how do I only activate one at a time? I have switch weapon (key 3) to toggle group cycle but it doesn't seem to be? Maybe I am just being really dumb but having both recoils active at the same time wouldn't produce the best results, any help would be greatly appreciated if any of this made sense ✌️
@@XIMCentralthanks for the speedy reply! Cycle set is the one with the crown isn't it? If so, yes that's correct, also my xim is updated to the latest firmware 😊
Ideally I want 1 gun active in the group and switching my weapon would automatically deactivate that and activate the other weapons binding, so one is active and the other is greyed out, I was sure this would be the case but if not it would be an amazing feature to have going forward and considering the amount of features the xim has already I wouldn't of thought it would be difficult, or maybe I'm being an idiot and haven't set it up correctly 🤣
@@vollted5519 Did you set the activation method at the top from "Held" to "Press"? See the video on how to do that. Only then you will get access to the other group actions.
I’ve noticed that when I apply a recoil modifier my recoil is laser like. After I finish my gaming session and comeback the next day, my recoil is no longer laser like?? Serious question.
@@XIMCentral So it happened today on the new MW3 PS5 in game. I have 180 angle at 25.25 aim magnitude sometimes it fluctuates randomly and I either have to adjust back to 26 magnitude vice versa. Is it because of deadzones? Idk thanks for answering! And I always save.
@@XIMCentral well only if the recoil is laser like then I just leave it. But after a while I’ll notice it’s not laser like anymore and have to re adjust the magnitude to where it’s laser like again. Just like in your tutorial. I guess it’s not a set it and forget it thing.
Link Channel Membership Subscription: ruclips.net/user/XIMCentraljoin
Buy XIM Matrix here (paid links):
Cheapest = Flashback: www.flashbackltd.com/products/xim-matrix-multi-input-adapter?_pos=1&_sid=891068637&_ss=r&aff=66
Amazon US: amzn.to/3DTZkFS
Amazon Germany: amzn.to/3KFbsyd
Amazon UK: - in a few weeks -
Amazon France: amzn.to/45Pr5es
Amazon Italy: amzn.to/4609Ebg
All XIM Distributors & their shops: xim.tech/shop/
English text: controlc.com/cb56be03
Hello, MW3 comes out on Friday, could you get the profile please, thank you very much
Mw3 profile plsss
@@ximmatrixEspañol It will be created once the game is officially out, and may take around a week.
@@thelaw8037 It will be created once the game is officially out, and may take around a week.
It does not allow you to enter any forum or update the gym. We are from Brazil. We are 79 players with Matrix and we get that we cannot enter the page. It tells us that you are out of reach.
Hello! I have a question. What actions do I need to assign in the matrix so that when I click on the Dualsenses D-PAD left it switches to a semi-automatic weapon with Rapid Fire and when I click on the D-PAD right it switches to an automatic weapon with normal shooting. What actions do I need to do in the xim matrix (assign groups to these weapons or set a switch)? Thank you in advance for your cooperation.
Yes you would assign groups to DPad Left and Right as shown in the last part of the video with the cycle.
Perfect i was struggling with this, wasn't sure how to activate now i can have multiple guns with recoil actions thanks
This video actually taught me a lot. I see now there is a lot i can do with these new group changes for my ops in R6. This video was much needed. Thank you and great work!
Happy to hear that man! :)
For me, crouch and fast-c are both inactive when I assign a group...... 1:44
Check if the group activation is correct and that one is active before the other one is toggled.
Dude thank you so much The official xim videos Don't really go in too much depth so your channel has taught me so much.... If I weren't so poor I'd give you some money my friend. Thank you for your time and hard work I sincerely appreciate it
Thanks for the kind words man! :)
Aber ich glaube wirklich das du eine Patriot oder PayPal einrichten solltest damit man dir eine Spende machen kann. Menschen sind so dankbar und fühlen sich einfach besser!
Xim matrix No support like past days for tutorial video and updates framwear , just like 3 or 4 video ( we don’t know how to use it )
Hey, what do you mean? What exactly doesnt work for you? And have you seen the XIM Matrix instructional videos from the XIM website?
I’m going to second this.
I’ve had to outsource to the community for a better understanding.
No tutorial videos, no instruction videos, and more often then not, people just ask to copy config codes rather than grasp a deeper understanding and build their own.
Takes the fun out of the builds with the frustration that comes along.
Yes instructional videos help but limited to explanation.
This is the most informative video thus far. I’ve own the matrix since the first set were available to community.. it still collects dust because I can only give an hour before I give up and revert back to my xim apex. (I’ve owned xim since xim4)
@@shawnhillis5829 I will make more tutorials in the future but right now i dont have the free time to do it :(.
@@XIMCentral understandable!
It would be beneficial for even just a picture of what each button in the UI represents and an “example.”
The community is a great source to help resolve issues and it’s because of the community the xim remains as successful as it is. Don’t get me wrong, what is built on a technical standpoint is second to none, but without others to help and give feedback, it might not have done as well.
I’m hoping to retire my apex soon and just use my matrix. I’m still struggling with a couple features I can do with my apex that I can’t build with my matrix.
This video does help point me in a better directions. Thanks!
@@shawnhillis5829you can’t join a small community of cheaters and then get mad that the cheating is not easily accessible, this page actually helps a lot and if you don’t find it helpful figure it out yourself
Will the Matrix be affected by the update of the Xbox 12 nov?
No it wont, this has already been confirmed by the dev team! :)
Just make sure to connect an original Xbox controller to your XIM for authentication!
So I cannot use my Xbox elite controller as a gamepad?!?
@@antfc2024 That works too!
In cycle part what if i want to remove the rapid fire for pistol , would still work ?
Sure you can just remove it from the cycle!
When I go to create a group and hit the "cycle groups" option, the only two choices are "next" and "previous" there are no "set" cycle options? how do I fix this?
Hey, see the video description, you must update both your XIM firmware and manager to the new beta.
could I play with a controller, and just use a keyboard to switch the groups?
Yes absolutely! Though you could also use modifiers such as DPad Up + Controller X = group A, DPad Up + Controller Y = group B and so on.
how do you set multiple to activate a command like that?
@@XIMCentral
@@joefig55 You use modifier keys for that. DPad Up would be the modifier in this case. Then you use cycle set only groups as shown in my Matrix Groups Tutorial video.
Hi xim, I was wondering if there is a video explaining how to set both a primary and secondary gun loadout to one individual group.
Hey, what you try to achieve particularly? Can you describe it in more details?
@@XIMCentral yes, I want to have a primary and secondary gun inside of one group, for example when I press 2 on my keyboard I can have rapid fire on dokebis dmr and anti recoil in the smg-12
@@BradyHicks-d7i You can do that as shown in the last chapter of this video by using a cycle set.
@@XIMCentralis there a video showing how to create anti recoil settings for both the primary and secondary guns?
@@BradyHicks-d7i You mean how to dial in the anti recoil or how to setup those two groups?
my monkey brain hurts. I get confused around the 9:20 part, i have my "2" key bound to two different loadouts but when i press it nothing seems to happen. is there a video that goes into more detail about setting that up. please help
Hey, what do you mean you have set it up to two different loadouts? How would your XIM know which of the two loadouts you want to have specifically? Or what do you mean?
@@XIMCentral@XIMCentral so I have 2 groups made, named "1x scope" and other "4x scope" both are recoil presets. I tried making a "set" with the enable group "1x scope" and disable group "4x scope" which i bound to my "2 key". I thought this is what you showed in the video but I must be wrong because it's not cycling between the 2 groups
@@nicholasgotte3809 Oh ok i see. So lets say you created a cycle set (crown) with two groups inside the set. The first one is 1x scope, the other one 4x scope. So by pressing 2 you load this set. You now need a button that cycles through this set. In my example i use Q = switch weapon. By pressing Q you will switch back and forth between 1x and 4x. You can use any button for switching, just assing the "Next" feature to it.
Is there a max amount of configurations? I’m having trouble I have quite a few but it won’t let me add more
Yes there is, you can have up to 24 configs. After that you must delete some (top right options manage configs).
When I press 5 for example to load my ace set with the pistol it loads both the pistol and aces primary how do I get it to load only 1
You specify that accordingly in your "5" binding. See the end of the video on how to do it. One group gets activated, the other is deactivated.
@@XIMCentral Iv sorted it for 2 configs 1 for attack and 1 for defence 🙂
Both of my groups are inactive (1:58 into the video) Any advice? Thanks.
Hey, its a bug with the current alpha firmware that doesnt automatically activate the first group A. A fix will be out soon. Until then just manually activate group a via a dedicated button binding.
How would the cycle work for controller since theirs not 6 free bindings you can have to cycle the stiff
You would use modifiers. Say DPad Up = the modifier and then any additional button you press does the cycling or group loading. Or you connect a keyboard to your XIM do to the group handling.
This video just blew my mind
Hello, Apex Legend does not work when I copy the shared settings. The keyboard key is firing, the mouse is not moving. Please help, while XIM Apex was playing fine, XIM Matrix was disappointing.
Hey, make sure to deactivate the Nav Mode as that will prevent your mouse from working. See the XIM instructional videos from the XIM website for more infos on that.
Ill have to rewatch the video and see but anways, How do you have two anti recoils active at the same time and work separately when you switch weapons? I'm trying on R6 to switch between the main gun and switch to a pistol with rapid fire smart action,
Hey, thats shown in the last chapter of this video with the cycle set. It allows you to bundle anti recoil groups and switch though them (with for example via your switch weapon button). This can be used for the example you have mentioned.
So if i want to use multiple weapon recoil groups in Apex Legends i just use your method like you did with the crouching? For example button 1 is default, 2 R99, 3 Flatline en so on..? Ofcourse you need to know which button is which gun. Correct?
Yes exactly, use what is shown in the last part of this video!
Great tutorial! I feel like we need more groups honestly and i understand we can also use more configs to double the groups but i feel like it can all be simplified if there were more groups . Still tho the matrix is fire no matter what 🔥 complex yet rewarding when you get it down 🔥🔥🔥
Hi mate, what ill be doing for example on destiny 2 all my guns that have 100% vertical recoil i can group them all to the one recoil action etc etc
I’m trying to create another workshop binding to my left mouse click and the manager is saying “insufficient binding capacity for workshop” I only have 9 any help ?
Hey, you have maxed out the maximum amount of bindings. Either delete some bindings and smart actions, or create a second config to store additional Workshop results in it. Later in 2024 the XIM Devs will explore possibilities to raise the binding limit.
hello!!
i’m trying to create a smart action on the ps5 that opens the playstation keyboard, but whenever it’s on the screen, no inputs will register.
i’ve tried r2 to press done, o to close it, d-pad/analog sticks and x to manually close it, nothing works except home button and share.
what am i doing wrong?
Hey, you would need to switch into a MnK output config for your PS5 to briefly register your XIM as an actual keyboard.
@@XIMCentral thank you for your response! i’m currently not home, but can you do that in the setting where you choose which input/output to use and connect the xim to a playstation account?
i don’t really understand. whenever i change the output in connection method to mouse and keyboard, the xim matrix disconnects from remote play entirely and i can’t use it
@@witchlocked Thats to be expected because you go from Remote Play -> native MnK. Nothing works in MnK mode because you havnt bound any keys yet. You would need to bind Keyboard K = K, Keyboard J = J and so on in order to use those. It may be more comfortable to just use 2 configs that you switch through. One for Remote Play and one for native MnK with all keyboard keys being bound inside it.
I watched the video sure but what would be the best option for a battle royal? Where you have to pick up guns and it’s not a preset class for primary and secondary
Id go with different configs and groups. Say its Apex Legends. Config 1 is set to hotkey X and covers all weapon combinations of R99 + whatever via dedicated groups. Say R99 + Flatfline, R99 + R301, R99 + Shotgun and so on. Then the second Config 2 is set to hotkey C and covers all combinations of Havoc. So Havoc + Flatline, Havoc + R301, Havoc + Shotgun and so in. So all you got to do in the game is load the respective config via hotkey, and then select the group of the exact weapon combination you are using. So with 2 button presses you always have the right setup.
Ich raff nicht wie du das mit der sekundärwaffe machst. Wenn ich Dreieck drücke passiert entweder garnichts oder die Waffe lässt sich nicht wechseln
Ist es möglich über die Revert Gruppe durch alle Gruppen durchzugehen mit nur einem hotkey? Irgendwie war’s mir da zu unübersichtlich
Hey, ja das wäre möglich. Wie sieht denn dein Setup aus? Die Idee ist ein Gruppenpaar zu erstellen. Z.B. per Taste X lädst du das Gruppenpaar Hauptwaffe 1 und Sekundarwaffe 2. Sie zwei Gruppen haben ihr eigenes Anti Recoil und/oder Rapid Fire. Per Gruppenpaar-Wechsel-Taste wird dann zwischen diesem Paar hin und her geweselt. Das ist im Idealfall deine Taste mit der du im Spiel die Waffen wechselst. Sprich drücke X um das Gruppenpaar für dieses Loadout zu laden, und danach wechselt dein XIM immer in die richtige Gruppe aus dem Paar wenn du die Waffe wechselst.
@@XIMCentral aktuell hab ich nur no recoil und das per revert gebindet, sodass ich per klick zwischen den Hauptwaffen wechseln kann. Aber sobald ich die Wagen wechsel kriege ich es nicht ausgemacht. Mein Plan ist quasi das sich per Dreieck für die jeweilige Gruppe das Recoil Script umschaltet und ich keine Einschränkung auf meiner sekundärwaffe habe.
@@Billigmarke Revert funktioniert auch, dazu musst du aber immer die entsprechenden zwei Recoil Gruppen hintereinander laden. Siehe dazu mein Video was ich vor ein paar Stunden hochgeladen habe (ALGS Apex Legends config video). Da zeige ich wie das mit Revert geht. Sonst einfach das machen was ich im vorherigen Kommentar geschrieben habe mit der Cycle Set Funktion (wird auch im letzten Teil dieses Gruppen Tutorial Videos gezeigt).
i don’t have the coloured buttons like the set and next button and i need help. also when i swap my weapon to secondary in hopes for rapid fire but it just goes to the next cycle
Hey, you must update your XIM Firmware and XIM Manager to the new beta one.
Hello I really appreciate your videos i just bought a matrix and they helped alot. But it says i have reached the max bindings even though i have less than have you have?
Either delete some actions to free up space or wait for the next beta firmware which will increase the binding capacity limit by a lot! ;)
hey, how can i make it so i can only use one bind on my controller ( left dpad ) to scroll thru and activate all my groups instead of needing multiple binds
Use a modifier for that. When the modifier is held, you switch into a brand new controller binding that doesnt affect your game. So you can do DPad down + right trigger = group 1, DPad down + left trigger = group 2 and so on.
I followed all the steps in this video and the smart actions but when i press my bind to change weapons it cycles down to my other anti recoil configs instead of my secondary weapon
Did you add those to a cycle only group with a next button being bound to your switch weapon button?
How can I cycle tru all my recoil settings with one button? I don’t have a big keyboard to assign a button to each one
You can but all your recoil settings into one cycle set and then cycle through them with one key. Or you use a modifier to basically double your keyboard bindings. So holding down for example key x + any other button loads a new recoil setting.
I’m having some issues with the groups. I have two groups, normal fire and auto fire. Sometimes in the middle of a game it switches to a auto fire group automatically and I can’t switch it back to normal. The auto fire stays even if I delete all settings of auto fire. This is really strange and I have to restart the console and XIM matrix to reset it
Hey, that sounds like something is off in the group management. Check the activations, something in there must be set up in a way where you can run into a one-way path where you cannot get out of anymore. Also reloading your config or switching back and forth from a different one will reset all groups (or you setup a button within your config that resets all groups).
hi how do i assign the switch buttons on dualsense ps5 to cycle between weapons in one group config. i play rust.
Use a modifier id say with a button you do not need. Say DPad up is the modifier and then with X, Circle, ... you switch the groups. This will avoid you from sending unwanted commands to the game as the modifier when held will suspend X, Circle, ... from sending their normal game action to the game.
hey i’m having in game problems with red pinging, when i hold y it just switches my groups and not ping
Hey, check your bindings then. There must be an overlap between red-pinging and group switching then. Use dedicated bindings for both to fix that.
@@XIMCentral how do i add a overlap?
@@drbnasty_8573 I meant there is an overlap within your bindings = a binding conflict. If you ping with key XYZ and switch groups with key XYZ then of course both have a conflict. Use individual buttons for each of the two.
@@XIMCentral how would that look in a binding for controller?
@@drbnasty_8573 Same example as above but just replace "key XYZ" with any button on your controller.
Hello can you help me so I followed everything in the video and I'm having trouble getting the the pistol to shoot in rapid fire. Basically if I do everything you do and etc the primary works perfect anti recoil is perfect and the pistol will shoot normal. When I go to my bindings/mappings section I noticed that your R2 button is not shown on the screen ( if it were it would have been made the the 2nd binding listed at the top) so I took my mine off as well and bam the pistol works and shoots rapidly but when I switch back to the primary gun it won't shoot and goes straight down (anti recoil). Basically how do I get the pistol to shoot rapidly and to be able to use my anti recoil for my primary as shown in the video lol
I have everything layed out perfectly. The anti recoil and pistol is binded up in a group and I have my switch weapon button grouped up with the "next" binding just need help figuring out this issue with the guns not firing. Once I assign R2 back on the bidings the primary works and then the pistol goes back to shooting single again.
Hey, your weapons should always be able to shoot in ADS mode when copying this. What the shown config is missing is a HIP binding that allows you to shoot. You can add a regular HIP shooting binding to all anti recoil groups except for the rapid fire group to solve this. You cannot add it to the rapid fire group because then this binding will prevent the rapid fire from working.
Not sure what you mean by hip binding but what I did was just added a R2 fire button to every anti recoil group like you said it works.. And Thermite is my favorite character anyway I can get you to make a config code for him and his primary gun pleeeease! :D @@XIMCentral
@@MartialMadnes That also works! :) Thermite uses the same recoil pattern as Castle and Frost i think, which i covered in one of the two Siege recoil videos in think!
@@XIMCentral Really this time the last question but um so I also play on Xbox is their a config for xbox? I don't know what numbers to put the magnitude to for each opp and theirs only 3 xbox opp codes that were posted :(
You explain this very well. I did set up my settings, but when I activate my anti-recoil, I cannot shoot my gun. My group shows active, but the recoil script doesn't work. I'm not sure how to explain it better. And how to make it work ! 😅
Have you maybe bound it to ADS only? Alternatively just bind a second fire action, or add a RT100% binding to the start of your workshop result. Normally it should already be in there by default.
I have to say, you're the best! Even though you do this part-time, you manage to respond to everything. It's really kind of you. I managed to find and resolve the issue.
@@alibz19 Awesome to hear that man! ;)
on latest update matrix , following the video step by step but cycle groups and revert groups are not coming up
managed to update it on the ios , now keyboard mouse and controller have no response when plugged in
Your XIM and manager must be on the new beta firmware for these new features.
I just figured out I can connect my ps5 and xbox series x controller to the xim matrix. But how can I add smart actions to R2/RT for no recoil like I can on mouse? There's no option to add smart actions.
Hey, see my Matrix Controller Workshop video on what you must do (remove auto-binding -> add right trigger position).
I made those group they work fine, but
1. i noticed i cant use example Maverick ability correctly because it keeps pulling the ads down and it doesn’t fire when
2. If i decide to run any other operator thats not a part of my group they cant shoot and when i put an extra R2 in then the fast shooting on the pistol goes away
You need to add shooting actions to your anti recoil bindings so you can always shoot. That way you also avoid the pistol issue. As for the first issue, when you use the torch your XIM has obviously no idea that you are using it as it gets 0 feedback from the game. So ideally bind another shooting button that doesnt trigger any anti recoil that you exclusively use for the torch. Or you setup a button to deactivate the anti recoil when using your equipment via groups.
Im on ps5 controller and i find it quite difficualt to figure out the mavrick situation, i have the same setups as u have in that video
I managed to figure out the other problem but not the torch one
@@MUMU--cc1cv Hey, as i said you will either have to bind a new shooting button to not trigger your anti recoil when using the torch (difficult on a controller due to limited amount of buttons), or you set up your groups so that the cycle gets deactivated when you switch to your equipment torch and gets activated again when you remove it again. Another option is to just not use a rapid fire setup for your secondary when playing Maverick as that allows you to use your pistol setup for when using the torch. At last, you could also set your anti recoil to ADS only and just not go into ADS mode when using the torch. This is probably the most easy and straight forward solution and doesnt require much adjustments. The general issue remains though, your XIM has no idea what is going on in the game so you will have to juggle those cases for your XIM by setting it up accordingly.
Hey i just noticed u have 2 of the same inputs as an example when u use ur primary weapon at 10:45 there is 2 “ace pr” activated how is that? I only have 1 what did u do to get a second one and whats the difference
Having trouble finding the “set, cycle” option on my app ?
Your firmware must be on the new beta version, same for your manager.
Alright mate how do I do shaiiko peek on Xim matrix config?
I watched your Xim Apex video but it is a much different lay out on the app now
Thanks
Lmk know if you figure it out
In the same way as shown in my XIM Apex Shaiiko peek video. Just use two smart action instead! :)
@@XIMCentral figured it out mate thank you!
@@qtblxzy1129 use RS - WAIT (150MS) - LS
make the config so rather than holding your set key to shaiiko peek set it to tap
@@qtblxzy1129 then just move your keys accordingly
is there any way they'll ever add more groups? i use a lot of different operators and cant get all the anti-recoil settings i want in the limited groups. as of right now i am only using group bindings to my most popular operators and an all-around recoil that helps most operators.
Later in 2024 this will be looked into. The Dev Team is currently working on a few other, more important features that see more demand within the XIM Forum. In the meantime you can use several configs to have access to more groups. Switch through them with config hotkeys.
@@XIMCentral i appreciate the speedy reply🙏🏻 and what do you mean? is there a way i could access more groups? sorry for any questions i may have i am very new to the xim matrix
@@falloffsss You would use a second config which allows you to access another 7 groups. Load it via the hotkey functionality, which makes it work like another group with 7 sub groups.
@@XIMCentral ohh thats very smart thank u so much
You mentioned in a comment there is a way to assign groups/recoil cycles to guns not just keys for example if I pick up and hold the r99 in apex it automatically switches to that recoil control pattern is this possible and if so could you point me in the direction to get this info I’d appreciate it
Hey, can you explain your use case a bit more? I think what you are looking for is the last thing that is shown in this video, unless i missunderstood you.
@@XIMCentral I appreciate the reply but to keep it simple is there anyway for the game for example apex legends to automatically recognise and switch to the correct recoil patterns I have configured for each gun I pick up or switch to without having to designate key binds?
What do I do if my binding has the maximum amount of actions but I need like 5 actions more?
You will have to delete some bindings to free up some space.
How on earth do I set up a separate config inside of a certain game config? Like I want to set up a separate flying configuration for battlefield 2042 that I can change back and forth to at the press of a button
Hey, i have replied to your other comment! :)
Hey again, i noticed when i fire a full mag and i keep holding L2 & R2 while it reloads it looks down..
And while reloading if i also hold R2 only it also looks down, how do i fix
Your XIM has no idea whats going on in the game. So by continuing to hold down your fire button your XIM continues to keep the anti recoil effect active. But since there is no recoil anymore as your weapon is empty it moves down your aim.
when I go to group cycle it only comes up with next and previous it doesn't have the two sets
Hey, you must update your XIM Firmware to the new beta one (XIM and Manager).
@@XIMCentral when I update it a message comes up saying it’s running the same firmware
@@XIMCentral I have done this and it still don’t show
Can I do the same for primary and secondary weapon in warzone buddy ? With a controller?
Many thanks ❤
Yes absolutely! I would suggest to use modifiers for controller players. Say you hold down DPad Up as your modifier, and then press X to load group cycle 1 for example. That way you do not need to connect a keyboard to load all these profiles!
@@XIMCentral
Sorry for such a late reply back buddy , I've had my three little ones and this is the first chance I'm getting to get back to you .
Fantastic stuff mate , really appreciate that,
I will give it a go and I will let you know how I get off .
Thanks so much ❤️
@@XIMCentral
Hi buddy ,
If I set my primary gun up perfectly ,
As soon as I put that gun in a group, I have zero recoil again ?
The same thing happens if I try to set my primary up first , then deactivate.
And set up the secondary weapon ,
When I go to activate both , zero recoil on both again ?
Not sure what I'm doing wrong.
Any help or tips would be greatly appreciated 👍
@@bamz2144 Hey, are you using the setup shown in the last chapter of the video? That one is the best to bundle a primary and secondary weapon group together. If not let me know how you have set it up! :)
@@XIMCentral I'm not sure if I'm honest I will rewatch the video over , and see if I can see what's going wrong my end .
Thanks so much mate ,
I will let you know how I get off 🍻
So how would I do it so if one game I pick a volt and hemlock in apex and the next game I pick up a volt and r301 and load the recoil for each without messing up the other
You assign respective groups for those as shown in the last part of the video. Say press 1 to load r301/volt, press 2 to load r99/flatline, ...
hey, i’m wondering if the razor huntsman elite and logitech g203 mouse will work with xim matrix? i heard the matrix might not be able to power too much rgb.
I havent heard of any of these to not work, but yes powerdraw issues could occur. In that case either connect an external power supply to your XIM (such as a powered USB Hub) or turn off the LEDs of your devices.
Can you show how to do the loadouts with the gamepad configuration instead of the mouse and keyboard one ?
Its the very same setup with no difference. You just bind it to a controller button of your choice. Ideally use modifiers so you can hold down DPad Up for example as your modifier, and then you can press any button on your controller to load the group without doing some random action in the game. Say DPad Up + X loads group 1 and so on.
Hello, is there a way to have shaikopeek ln the matrix?
Yes there is! Its the same setup as shown in my Shaiiko XIM Apex video, you just use a smart action instead. Might make a dedicated XIM Matrix video about it soon!
Can I make it so when I use scroll wheel down (which I use for switching weapons) to go from primary then scroll down to swap to the secondary and also active the group for the secondary then scroll down again and deactivate the secondary and active the primary?
Yes thats possible! :)
@@XIMCentral do you go over that in the video?
@@Gifteddds Everything you need to know to realize this is taught in this video, yes.
@@XIMCentral ok thank you ❤️
Hey I was wondering if you have any videos over Dmr macros?
Hey, what do you mean with DMR macros?
I tried the combination dpad up + triangle on dualsense, but the problem is that the dpad up button is already used in the game, if I assign it I can't use it in the game
Use a button that has no real purpose in the game instead then. Such as statscreen or those things that you dont mind briefly being open when holding down your modifier. Or completely delete the binding from your binding list to not trigger it.
@@XIMCentral thanks for the answer, can you also tell me how to make it so that I can disable all anti-recoil bindings so that the behavior in the game is by default?
@@talasskiy4083 Create a new binding that activates the very first group (A) and deactivates all other groups (B, C, D, ...) when pressed.
@@XIMCentral tnx
Have i understood this video correctly if Group Cycle is the easiest way to swap between different Anti Recoil Smart Actions for different weapons in Apex Legends??
And basically i have to know by memory which one is which weapon everytime and all the time i play? :O
Yes, or you use dedicated configs per weapons which is a bit more complicated id say.
Why does it say that I’m at maximum capacity when I try to add a new configuration
You can only have a certain amount of configs. Just delete one of them via the manage config option in the top right corner.
Hello, I am having problems copying the shared configurations. When I choose the game I will play, I am asked to choose what I will play with. Since I play with keyboard and mouse on PS5, I choose keyboard and mouse. What should I choose
Pick mouse and keyboard if you want to play with MnK, or pick Mouse and Gamepad if you want to play with mouse, keyboard and controller.
i can't get the cycle primary and secondaries working it doesn't turn off the primary anti recoil
Hey, in that case there must be a setup error somewhere. Compare your setup to the one shown in the video, somewhere there must be a difference.
i followed the steps for the sets where you swap anti recoil settings but i just doesn’t work when i press it? do you know what i am doing wrong or should i try update the xim
Yes definitely update the XIM. You need the same group features as shown in this video for this to work!
i’m trying to do the rust recoil and for some reason when i’m like close it’s like pretty good but when i go far it’s start to not work like it goes for the most part side to side do you know what going on ?
Hey, the longer the distance the more apparent minor anti recoil inaccuracies become. I would say create another Workshop on top of your existing one to fully remove the last few recoil outliners. Then it should also be accurate on range! :)
Very cool video, it was very informative congratulations, Xim Matrix is a monster. Could you share your mapping configurations and smart actions that you showed at the end of the video?
Nice to hear that! The config used in this video is the same one as the config from my "XIM Matrix R6 Config" video! It just includes the anti recoil smart actions from my other R6 tutorial videos for demonstration purposes! :)
what do we do if i have a primary with recoil and then a secondary machine gun
Hey, i have replied to your other comment! :)
See the setup at the end of this video, you use group cycle to switch between two anti recoil modes! :)
@@XIMCentral thanks so much man keep the content up!
how did you get it to where when you swap from primary to secondary it swaps and activates anti recoil and fast firing for your secondary
Hey, did you update your XIM Firmware so you have the new cycle set with the crown symbol?
@@XIMCentral i just got mine like two days ago so it should be udages
@@XIMCentral updated
@@XIMCentral when i swap to secondary it pulls the gun down
@@bayleehobbs You got to set it up as shown in this video then so that your anti recoil only applies to your primary and not to your secondary weapon.
struggling to see how to have "groups" and multiple recoil patterns for weapons on controller
You would use modifiers. Say your modifier is DPad Up. Then tie the group activations to DPad Up + X and so on. That way only DPad up will be lost and wont have any ingame action while all other controller buttons remain useable.
I need the besavior u5 to play with the xim matrix??
Matrix is PS5 compatible, but if you want to use the USB port of the PS5 then yes you need a U5.
What if I just want anti recoil on my secondary and none on my primary in only one group, how would I switch between back and forth?
For that see the last chaper in this video. You use two groups, A and B. Your normal non-anti recoil shooting button is bound to group A = primary and auto loaded. Your group B is activated via a cycle set when switching weapons and contains an anti recoil for the secondary. Its basically the same setup shown in this video but you dont use anti recoil for your primary.
Is there a macro setting cause i cant seem to find it i want it to hold l1 for 2 seconds then let go but cant find a setting to do it
Create a "Press" smart action and add a 2 second wait action behind the L1 press.
@@XIMCentral alright thank you i will test it out maybe i will understand it better cause im trying to set it up to do a sequence of button presses like combos just got it today going from xim apex so im excited to test it out and ur channel has been a life saver for years now, keep up the good work
@@nuggis Its actually quite easy to setup. I recommend to check out the smart action chapter in the XIM Manual which goes over such basic things. My videos usually cover more advanced things, so the manual might be the way to go first (and also sufficient for your planned project).
@@XIMCentral yeah i just finished it i understood it but it seemed like a tedious process to setup the groups, like apex had so easy setup process i will rewatch it multiple times maybe i didn’t understand it completely🤣
@@nuggis Yeah this became a bit more complex but in return other things are far easier to setup with Matrix. You can also go the easy route and just use several game configs that you load via hotkeys. Each game config is like a sub config then.
When I do the cycle it won’t let me I do the exact thing you do
You need to update your XIM Firmware and XIM Manager to the new version! :)
do you know when the besavior is going to fix the audio?
They said they want to do that, yes. With the most recent FW they already fixed the 1000Hz mode.
@@XIMCentral do you have an idea of when they’ll fix it?
@@drayyc0 I dont, sorry. You could probably send them a support mail though. If they tell you any details please let me know!
@@XIMCentral i’ll let you know if they me anything!
Od1n i got a wooting keyboard set it up and if i want to use analog movement i make a mouse and gamepad config then select wasd movement on the config?
Yes! But please read the Wooting Matrix setup guide from the XIM Forum. There are a few extra steps you must consider!
Why do you have to select wasd bindings in analog mode in the config? You are already using the left stick as movement right…?
@XIMCentral I have I followed the guide also set it to xbox controller on wooting settings
@mathialba when you make a mouse and gamepad all the buttons aren't binded to anything and I can't move around until I click on the left stick and select wasd movement
@@ferzahfy5196 A Mouse and Gamepad config wont come with pre-bound keyboard keys. So you have to manually add those. What you described is therefore to be expected when selecting a Mouse and Gamepad config.
My mouse work eith apex but not compatible on matrix. Is there future update for hardware compatibility?
Which mouse do you have?
@@XIMCentral Roccat Kone XP Air. I also read on the ximforum and have the same issue and stated it's not compatible.
Where can I find your Pistol Rapid Fire with Anti Recoil?
In my "Nexus - Best Rapid Fire Setup" video. Its the same setup for Matrix! :)
can u cycle through groups with one button? on the nexus
Nexus doesnt have this particular group firmware update yet but yes you can switch with one button on Nexus too.
Is there an obstacle to recoil to the right and left?
Hey, what do you mean exactly?
Hello, I have a problem with the xim matrix. When I connect it and move the mouse, it disconnects. Can you help me?
Does it also happen when you remove some of your attached devices?
@@XIMCentral no
@@ms_tf7579 Then its a powerdraw issue, your devices need too much electricity. Either reduce the load by turning off LEDs, charging the controller and such or add an external power supply to your setup.
@@XIMCentral yes in iraq electricity not good how add external power supply ?
@@ms_tf7579 You can get a USB Hub with an external power supply (5v 3A). Connect the hub to your XIM. And then your mouse and keyboard to the hub.
yo my anti is being really weird. I am using qurkkys settings and i tried to just adjust ur anti reciol values to work but i’m at 2.97 and it goes up and then 2.98 goes down.
My anti recoil values will only work if you use the same settings as me. If you use the ones from someone else you will have to adjust all smart action magnitudes.
how do you bypass mousetrap?
@@fyqh You should install the new matrix beta firmware and follow the SAB guide from the XIM Forum.
Ok I know I ask a lot of questions and I apologize. I set my xim up and it felt amazing! I’m a wrist mouse user not arm. The next day I log on and the sense was dramatically slower out the blue without me changing a thing. Is this a bug?
Which game? And did you save your config changes before shutting down the console?
@@XIMCentral rainbow six and yes I did. It progressively gets slower and the auto fire for dmr stutters. It never shots the same
@@Ripper_J Oh you got the sensitivity bug then due to using non-default advanced settings. See the XIM Game Settings topic on how to solve the issue! :)
@@XIMCentral negative. I didn’t use them at all. I purposely made sure all settings were correct. Advanced settings were disabled
@@Ripper_J Advanced settings must be set to default values and then deactivated. On some consoles setting them to 0 doesnt equal default. If in doubt reset your ingame settings to have the default ones again.
Do you ever do a private Discord screen share? I would pay you to walk me through this. I'm over my head and cant seem to figure it out
Hey, what exactly do you struggle with?
Hey @XIMCentral My xim started actin weird ever since I plugged my Xbox Scuf controller in with it. Everyone I plug it up my Xbox, it’ll turn on then start blanking white in bursts repeatedly and won’t work. But it doesn’t do it when I plug it into my laptop. I factory reset it and updated firmware to the latest multiple times but it still does it. Any fixes?
Are scufs using a authentic Xbox controller? If you have another controller try that one
@@Haunttts yea the scuf elite controller might have been the prob but I no longer try to use it. No matter what I plug in the matrix, it’ll always start blanking in white bursts and don’t work
What platform are you trying to play on? White blinking means the XIM cannot communicate with the platform you try to play on.
@@XIMCentral it’s an Xbox series s
@@worthybeast3598 in that case you must connect an original Xbox controller to port 3, and your Scuf to either port 1 or 2.
i need help with leaning left and right while aimed in your r6 config video. you never went over that step can you help?
Leaning is done through the same buttons that you use for melee and sprint. If in doubt always chekc the ingame controller layout to see which button performs which action.
@@XIMCentral i’m also having a problem with binding multiple recoil control configs can you make a video going a little more in depth on how to have multiple bindings for different recoils for ops ?
@@fearvon9374 Hey, this is what the last part of this video shows. You use Cycle Set Groups that load the respective group combinations that handle one operator each! Id say for learning purposes just redo the example you see in the video but with your own smart actions. Then cycle through them.
@@XIMCentral i have all my sensitivity situated but now i cannot get them into that red cycle mode with the crown so i can press a key and switch through primaries not sure why
@@fearvon9374 Hey, id say create a support ticket in the XIM Forum together with screenshot son how your bindings look like now. That would help to find the issue.
I got an email that the xim apex isn’t available anymore on you guys main page…. If I buy on Amazon will it be good?
XIM Apex isn't being produced for like 3 years now and won't return as the components cannot be sourced anymore. It's successor XIM Matrix is out since a few months now.
But I heard that I need to have an Ethernet cable plugged in, in order to use it is that true?
I’m sorry for bothering you but it’s just that I recently learned about the xim and it’s so good all my friends have it and I wanted to get 1 I should’ve bought it from last month but not sure which 1 to get
@@2kwhip An Ethernet cable is only necessary for the PS5. See the "instructional videos" on the XIM website for all details on that! :)
@@XIMCentral what about Xbox series s do I need an Ethernet cable also?
I own all your products. I decided for myself that I would like to play on a gamepad, I really like the hyposcope on the xim nexus, but the sticks of all the gamepads are better and the dualshok 4 is what I’m used to, but the hyposcope on the nexus is better. are you planning to update nexus ll☺️?
That is something the team would like to explore in the future actually! :) If you prefer the DualShock maybe give Matrix + Dualshock a try, it lets you use the gyro too. The gyro module isnt as good as the one from Nexus, but maybe it still plays good enough for you! :)
@@XIMCentral Yes, I still use dualshok + matrix. but I'm already used to a good nexus gyroscope. Here's a compromise. I'll wait now for nexus ll
@@XIMCentralI thought you aren’t associated with the XIM team?
@@Firefromheat The channel isnt meant to be official, but that doesnt have to mean that im not part of the XIM team! :)
For me everything works fine except for when I try to swap to my secondary I can’t get it so just active my rapid fire it just goes down the list of my anti recoil every time I press it
Hey, did you assign a cycle next to your "switch weapon" button as shown in the video? You can have it switch into your rapid fire smart action then to activate rapid fire for when you are using your pistol.
How do I copy an paste config smart actions in from the cloud sorry new to the matrix
Hey, you copy the paste code from the cloud and insert it as a new binding (bottom option "paste").
Do you can create only 7 Groups ( Different operators) or more
For now its limited to 7. In future firmware versions this limit will be raised most likely.
Hello , what is the best mouse for xim matrix on overwatch ? idk do i buy deathadder v3 or logitech g402
The logitech g pro x superlight is probably the best mouse right now.
@@XIMCentral gpx is kinda expensive , any another mouse ?
@@JP-5I use a g502 and get along fairly well but it’s a heavier mouse so might not be for you and the hyper x pulse fire was good
@@JP-5 Glorious mice are also quite good and significantly cheaper! The Logitech G203 is also amazing considering its price!
@@XIMCentral what about razers mouse ? is it a good choice ? Like razer viper mini or razer viper v2 pro or deathadder v3
Very informative video! great work. I was wondering if you could make a video, ONLY explaining how to group primary weapon recoil setups and how to switch between them? ive gotten as far to make a recoil file, but im stuck trying to make a recoil file for all my primary weapons and group properly. keep dropping that good information brother!
Hey, that is what the last part of the video does. You can use that for primaries and just delete the part about the secondaries.
Hallo unzwar wen ich anti recoil einstelle habe ich aber auch anti recoil auf der maestro gadget cam und z.b auf def twitch drohne wie soll man das wegbekommen LG
Einfach per Gruppe aktivieren oder deaktivieren. Siehe dazu das Video wie du dann dein Anti Recoil an- und ausschalten kannst.
@@XIMCentral im welchem viedeo sehe ich es
@@KlausUlrecht Das Video das am Ende verlinkt wird, ist auch in der Videobeschreibung zu finden.
@@XIMCentral ich finde es nicht wie heisst das viedeo denn
@@KlausUlrecht Es heißt meine ich "XIM Matrix Groups Tutorial" und ist in der Videobeschreibung verlinkt.
why wont my groups activate when i press the key?
Have you bound those keys as a group activation button?
i cant even figure out how i make it so i can make more than one anti recoil script thing into one conig cause i when i try and make it so that i have more than 1 shoot bind it just makes me not able to shoot
Hey, thats shown in the last part of the video. You bind R2 100% at the beginning of each anti recoil smart action to avoid not being able to shoot.
@@XIMCentrali have figured this out i just need to know how i can have my primary out and have anti recoil on it and then switch to primary and have no recoil on it
@@AbigailAudrey-q4v For that see the last part of this video with the cycle set. This is how you would handle such a situation.
@@XIMCentral hi thanks i figuted that out but when i do anti recoil i use to many actions so i cant bind rt at the star t of everyone i assume this is something that cannot be fixed
@@AbigailAudrey-q4v The next firmware will increase the limit, but until then you could just create a new binding to the same key/button and place RT100% to it.
@XIMCentral could you tell me what the group for your C button is? If its quick peeking, could you send me the sequence? lol
Its a Shaiiko peek smart action, will probably cover it via a dedicated video soon. My Matrix is already on the upcoming beta firmware so the copy and paste code would sadly not work for you. The firmware will be out very soon though!
Hallo wo bekomme ich testflight einladung codes für die firmware Update xim matrix ?!!
Hey, einfach über Safari auf den Downloadlink im Forum klicken. Der Code ist Teil des Links.
@@XIMCentral ok danke
how do i use the “next” thing?
It cycles through your set. Say you have a set of 3 groups, when pressing next you go from 1 to 2, then from 2 to 3, then from 3 to 1 again and so on.
This is a great channel and you are a masssive help to the community! Ive just purchased the matrix and im having a few issues trying to figure out group bindings, i have everything set, but within my group both are active at the same time and not cycling, which would be counter intuitive to having 2 sets of recoil for 2 weapons at once which would lead to some wonky behaviour with the weapons, if i could share photos to make things a bit bit simpler to understand i would, Im 90% sure ive set everything up correctly but for some reason the groups arent toggling for one to the other 😞
Hey, have you updated your XIM to the new firmware? Also check that you are using cycle set instead of cycle as otherwise active groups remain active when activating the cycle.
Maybe the matrix isn't capable of doing what I'm trying to achieve, I have key 7 as (the same as my load out) to move into my group bindings which has an anti recoil adjustment for the HRM and one for the SOA, I've grouped them but they don't switch and are both active at the same time, how do I only activate one at a time? I have switch weapon (key 3) to toggle group cycle but it doesn't seem to be? Maybe I am just being really dumb but having both recoils active at the same time wouldn't produce the best results, any help would be greatly appreciated if any of this made sense ✌️
@@XIMCentralthanks for the speedy reply! Cycle set is the one with the crown isn't it? If so, yes that's correct, also my xim is updated to the latest firmware 😊
Ideally I want 1 gun active in the group and switching my weapon would automatically deactivate that and activate the other weapons binding, so one is active and the other is greyed out, I was sure this would be the case but if not it would be an amazing feature to have going forward and considering the amount of features the xim has already I wouldn't of thought it would be difficult, or maybe I'm being an idiot and haven't set it up correctly 🤣
I guess the only way would be to create 3 separate configs for the 3 loadouts I have in warzone 🤔
I have a question ? I play PUBG on PC with a Xbox controller. Will Xim matrix work with me doing this ?
Yes that works!
If I only play mnk, is it important to connect the controller to the Matrix?
That depends on the platform. On PC and PS5 its not required, but on Xbox it is.
can you paste this video xim configuration here or in the description? so i can use it as template thanks
Hey, i have replied to your other comment.
where did the cycle bind go
You need to update to the latest firmware to have these new group features.
@XIMCentral ok thanks, have a blesses day, God bless you and your household
@@XIMCentral i did and i still only see enable and disable group binding, no toggle or cycle
@@vollted5519 Did you set the activation method at the top from "Held" to "Press"? See the video on how to do that. Only then you will get access to the other group actions.
@@XIMCentral Yes I just found it, thank you
I’ve noticed that when I apply a recoil modifier my recoil is laser like. After I finish my gaming session and comeback the next day, my recoil is no longer laser like?? Serious question.
Which game? And did you save your config settings before shutting down the XIM?
@@XIMCentral So it happened today on the new MW3 PS5 in game. I have 180 angle at 25.25 aim magnitude sometimes it fluctuates randomly and I either have to adjust back to 26 magnitude vice versa. Is it because of deadzones? Idk thanks for answering! And I always save.
@@campos3452 Hey, does it get more consistant if you increase or reduce the magnitude from 26% to say 26,05% or 25,95%?
@@XIMCentral well only if the recoil is laser like then I just leave it. But after a while I’ll notice it’s not laser like anymore and have to re adjust the magnitude to where it’s laser like again. Just like in your tutorial. I guess it’s not a set it and forget it thing.
@@campos3452 Do you maybe have variance activated in your Matrix smart action?