So awesome to see this done ALL ONBOARD!!!....sorry, I don't feel like grabbing a computer everytime I want to change an effect. I know I am not the only one. Thanks.
I love this tutorial. I was almost gonna trade my POD HD 500x in to get something different until I saw this video. I have never seen any video that explains how to use the unit in very lay man’s terms as this one. You’re amazing!
So helpful and a total life saver! Thank you so much. I got one of these from my church to use in the worship service and had 1 day to figure it out and I found your channel and it saved the day! Thank you so much! God bless!
I think there are many pedalboards, among the most avanced, this beautiful one, is one of the easiest on how a pedalboard is set up. Besides, one can use irs. It has good effects, maybe the amount of amps are limited...
Just what I needed, now I can get it out of the cupboard again and just set it and play it, spent so many hour just fiddling with it and losing playing time. Thanks for this well explained vid, cheers top man.
Thank you, this is the most helpful video I've found here on RUclips about the HD500. Bought it used and have just been staring at it, not even with a guitar plugged in. Mostly just want it for live situations so this video was very helpful.
Super helpful. I haven’t even set my board up yet but after watching this (no guitar in hand) you explained this so well I shouldn’t have any problems setting it up. Thank You Jon! - Jahi Nelson: Your New Subscriber
Great video. I did learn the basics of this years ago. Then it has sat for a LONG time :). I now have 2 external pedals so I used this method, and I have the fx loop on. The part I didn't know of ( didn't read the setttings ) was the use of the expression/wah pedal. Now I can have even more fun. Cheers!.
Thanks John, what I was hoping for is to have a sound from A assigned to FS1, B sound to FS2, and so on if that is possible . So far no one has addressed this possibility. Thanks for listening
Hey John - have you played around with the microphone input to see if you can apply effects to vocals (maybe delay, reverb, etc) and then split the guitar and vocal to outputs left and right? Really like your videos on the HD500X. John
Great video congratulations!! I would like to ask you if I should use the simulation of amp from the pedalboard with the physical amp or not. I mean should I use the simulation of the amp and the clean on the physical amps? Should I put only the effects from the pedalboard and use the sound from the physical amp? Or should I use the simulation amp from the pedalboard combined with the physical amp knobs (drive, treble etc) I am really confused help.
I have had mine for about 5 months or so now and it is great I would recommend learning enough to kind of just set it up happy call Mom set your effects Loop and there is well so you have your own pedals going through it cuz you definitely want to have some outside pedals I think this thing sounds good but dirt pedals some of those things sound better externally chorus pedal. Babe you got to go back to that meal you all and start digging through it got to go through that thing at least one used your odd for a couple of months and then keep going back to that manual once every several weeks cuz there's so many options that you're not using the thing is really good
I have mine set up (ABCD) cuz I usually just download patches because I have trouble making presets on my own lol. My question is.. is it possible to set them up as I’m changing a patch to another that it won’t cut off the sound quickly and have it just fade away so it won’t be so obvious. Not sure if I’m making sense lol. Thank you
Hey Jon, great job man! Would teach some options to bypass it? Like in the boss gt100 I can set the pre-amp off. How would you do to switch from pod to the amp?
Hey man, great coverage and reeealy good explanation of the POD. Wanted to ask you if and how you clean your device (especially the foot pedal, I just can’t get dirt off of it :P) Cheers!
I just got one of these yesterday,brand new, open box., the power supply was untouched, but no pilots guide?, huh., anyway, there are tons of sounds I’ll never use., I’m looking to build heavy modern metal tones first, (Jeff Loomis, Kieth Merrow, Pat Obrian, ect..) then down to doom, hard rock , to clean ambient tones.., I have to say it took me a bit to navigate, even with the pilots guide downloaded from line6., I’ve got a lot to figure out here.
I just got a 500 and am trying to find out if I can assign all eight foot switches to 8 different effects and have the expression pedal for volume,wah all in one patch or am I limited to just eight total including the expression pedal?
Because my amp block is just 2 blocks from thr 1st one. I wanted to put more gain staging but i cant because i cant move the amp and the mixer to the other blocks
Can you make something about the loop option? Is there a way to loop longer than 15. - 20 seconds? It seems there is limit on how long it can loop. Sucks
Why don't show how to use the PC download you can use to edit with ? The screen / format is big and easy to use , plus you can create the video with just the screen and the editing . Just a suggestion.
Great video! The board is truly amazing, the tone is pretty much equal to the helix, yet a fraction of the price! Thanks for the videos man. Go check out a #looppedal playthrough at my channel Cover song channel guys!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
So awesome to see this done ALL ONBOARD!!!....sorry, I don't feel like grabbing a computer everytime I want to change an effect. I know I am not the only one. Thanks.
I love this tutorial. I was almost gonna trade my POD HD 500x in to get something different until I saw this video. I have never seen any video that explains how to use the unit in very lay man’s terms as this one. You’re amazing!
Thank you so much ! I just bought this bad boy yesterday, I felt dumb as a rock . Thanks for this
So helpful and a total life saver! Thank you so much. I got one of these from my church to use in the worship service and had 1 day to figure it out and I found your channel and it saved the day! Thank you so much! God bless!
I think there are many pedalboards, among the most avanced, this beautiful one, is one of the easiest on how a pedalboard is set up. Besides, one can use irs. It has good effects, maybe the amount of amps are limited...
Just what I needed, now I can get it out of the cupboard again and just set it and play it, spent so many hour just fiddling with it and losing playing time. Thanks for this well explained vid, cheers top man.
super helpful. just got my pod and id be completely lost without your videos.
Perfect, THANKS! This is still a relevant pedal
This really cleared my confusion. Thanks so much for the video.
Thanks Jon, you literally are making me use the maximum potential of the POD. Greets from Peru!
Thank you, this is the most helpful video I've found here on RUclips about the HD500. Bought it used and have just been staring at it, not even with a guitar plugged in. Mostly just want it for live situations so this video was very helpful.
Super helpful. I haven’t even set my board up yet but after watching this (no guitar in hand) you explained this so well I shouldn’t have any problems setting it up. Thank You Jon!
- Jahi Nelson: Your New Subscriber
Awesome!
Thank you for all your video's about the HD500x. Very helpful. Great!!
Great video. I did learn the basics of this years ago. Then it has sat for a LONG time :). I now have 2 external pedals so I used this method, and I have the fx loop on. The part I didn't know of ( didn't read the setttings ) was the use of the expression/wah pedal. Now I can have even more fun. Cheers!.
Is there a way to disable the looper switch?
Thanks John, what I was hoping for is to have a sound from A assigned to FS1, B sound to FS2, and so on if that is possible . So far no one has addressed this possibility. Thanks for listening
Thanks Jon !!🧡
Great stuff...thanks Jon
Hey there, what about if I wanted to use the 500X as a pedalboard only? No amp models.
Need a suit case to transport it. This size is out now. But good video
Hey John - have you played around with the microphone input to see if you can apply effects to vocals (maybe delay, reverb, etc) and then split the guitar and vocal to outputs left and right? Really like your videos on the HD500X. John
Super handy to know, thanks man
Thank you it was very informative
Great video congratulations!! I would like to ask you if I should use the simulation of amp from the pedalboard with the physical amp or not. I mean should I use the simulation of the amp and the clean on the physical amps? Should I put only the effects from the pedalboard and use the sound from the physical amp? Or should I use the simulation amp from the pedalboard combined with the physical amp knobs (drive, treble etc) I am really confused help.
I also suggest and request that you make a tutorial on how to make complex dual line signal chains
That's a good idea!
Thanks!
More pod videos!!!!!
This is awesome, thanks
This is great thanks. But can you do it without picking an amp ? I have a hot rod deluxe that I like how do I get it so I am using my amp ?
I have had mine for about 5 months or so now and it is great I would recommend learning enough to kind of just set it up happy call Mom set your effects Loop and there is well so you have your own pedals going through it cuz you definitely want to have some outside pedals I think this thing sounds good but dirt pedals some of those things sound better externally chorus pedal. Babe you got to go back to that meal you all and start digging through it got to go through that thing at least one used your odd for a couple of months and then keep going back to that manual once every several weeks cuz there's so many options that you're not using the thing is really good
How do I increase light on my pedal screen
Thank you so much!
Great video, thanks!
So can you use the amp models in the board if you're running through an external amp ?
How to used the loop without cut?cause my loop doesn't looping theirs a cut everytime I record for loop
Thanks
I have mine set up (ABCD) cuz I usually just download patches because I have trouble making presets on my own lol. My question is.. is it possible to set them up as I’m changing a patch to another that it won’t cut off the sound quickly and have it just fade away so it won’t be so obvious. Not sure if I’m making sense lol. Thank you
Hi Sir. I cant switch my Expression pedal from 2 to 1. I already press it down hardly but nothing happen
please help me to fix it
I have line 6 pod hd500x .but it stuck on update flash .how I solve this . Plzz help me ....
Why not use the edit software?
Hey Jon, great job man!
Would teach some options to bypass it? Like in the boss gt100 I can set the pre-amp off. How would you do to switch from pod to the amp?
If you use the amp model (no external amp), do you hook up the HD500x to external speakers?
Gracias señor
Hey man, great coverage and reeealy good explanation of the POD. Wanted to ask you if and how you clean your device (especially the foot pedal, I just can’t get dirt off of it :P) Cheers!
I just wipe it down with a microfiber towel👍 If your 500x is really dirty try a damp towel. But just don't get water inside the 500x!
Look into monster wipes they'll take off anything, they're damp but dry super quick.
I just got one of these yesterday,brand new, open box., the power supply was untouched, but no pilots guide?, huh., anyway, there are tons of sounds I’ll never use., I’m looking to build heavy modern metal tones first, (Jeff Loomis, Kieth Merrow, Pat Obrian, ect..) then down to doom, hard rock , to clean ambient tones.., I have to say it took me a bit to navigate, even with the pilots guide downloaded from line6., I’ve got a lot to figure out here.
how can i turn multiple blocks on or off simultaneously, without the other one just switch off or on?
Do you recommend me getting one in 2020? From your knowledge is it better than the Firehawk?
Did you have a chance to compare the 500x with the Helix/HX Stomp? If yes, did you notice a significant upgrade on your tone?
if i’m not assign any effect to the footswitch , is it the effect is turn on ?
I just got a 500 and am trying to find out if I can assign all eight foot switches to 8 different effects and have the expression pedal for volume,wah all in one patch or am I limited to just eight total including the expression pedal?
How do i move the mixer block?
Because my amp block is just 2 blocks from thr 1st one. I wanted to put more gain staging but i cant because i cant move the amp and the mixer to the other blocks
Can you make something about the loop option? Is there a way to loop longer than 15. - 20 seconds? It seems there is limit on how long it can loop. Sucks
Yeah for sure. I'm planning on doing a looper video in the nearish future.
boss gt-100,pod hd500x or hotone ampero?help please :)
Sick 🤘😁
Nice name
@@scotthellier7576 lol thanks 😭😂🤘
Dude. I’m in edit mode and can’t get out. I have to use this for a performance Sunday!!!! Help!!!! It won’t go out of this mode what don’t do???????
Why don't show how to use the PC download you can use to edit with ? The screen / format is big and easy to use , plus you can create the video with just the screen and the editing . Just a suggestion.
Great video! The board is truly amazing, the tone is pretty much equal to the helix, yet a fraction of the price! Thanks for the videos man.
Go check out a #looppedal playthrough at my channel Cover song channel guys!