After building a comp crawler bought a Ebay capra will definitely be ordering your kit it needs help..very good informative video nice to know exactly what you need to complete a build..
@@rockpiratesrc3828 NO THANKYOU. Because of your upgrades ect. I am killing lines/gates in our comps in England. Thanks to ROCK PIRATES. I'm really surprised HOW MANY PEOPLE in my country don't know about ROCK PIRATES UPGRADES ( THERE MISSING OUT!) REALLY hope you have a great weekend once again THANKYOU 🇬🇧🇺🇲🕊️✌🏼🤩🏴☠️☠️🤙🏼🤟🏼
Now this is the kind of video that really helps in putting a truck together, especially for newbies. Great video. Will be ordering parts soon. Thank you !!!!!!
It looks like everyone is enjoying their Capra axled Interceptor builds so I figured might as well add another project to the 3 I already have going. Lol. I believe I ordered everything I need from ya to get started except for a front axle and trans. I ordered some high clearance links for a 12.8 wheelbase so I figured I’ll start there and see how that looks.
I’m doing this build. Parts are great but one thing is the cross braces are much shorter than the width of the Capra skid, so you either have to put spacers between each end of the cross member and the rail or pinch the rails to meet the cross members. Puts a lot of strain on the rails and the skid. The skid actually flexes if you go this route. I put spacers in.
I’m trying to get everything ordered for a similar build. Can I ask what wheelbase yours will be? Mine will be between a 12.8” to 13” depending if I use the longer Traxxas Jato rod ends. I’m trying to decide on which driveshafts to order. I drive over the road so I was trying to have everything at the house when I get home. Thanks for info you share.
Would the skids mounting holes match the standard 10.2 chassis mounting holes? I have a custom built rig that I'm converting to 4 link and was wanting to upgrade to this skid.
Are those Axles aluminum? Or hard Plastic? I'm trying to figure out on their website which to get, either the Portal kit or just the Aluminum axle housing
I’ve been looking for the same thing. I like stock bumpers that come with the scx10 pro. I need to check if the are available to buy separately now. They are very low profile and I am surprised there aren’t several others just like it. It seems to me that most people don’t run bumpers or they will just put a chassis brace in its place.
Just ordered everything, Capra getting a makeover.
Good job boys !!!! Killed this one !!! Love the battery bar design !
Thanks bro! Hope you’re doing good!
After building a comp crawler bought a Ebay capra will definitely be ordering your kit it needs help..very good informative video nice to know exactly what you need to complete a build..
Thanks Bruce we appreciate it!
Hi Sir I'm VERY IMPRESSED. Such cool upgrades. THANKS for everything you do for this GREAT HOBBY of ours 🏴☠️☠️🇬🇧🇺🇲🕊️✌🏼🤩🤙🏼🤟🏼
Thanks 👍
@@rockpiratesrc3828 NO THANKYOU. Because of your upgrades ect. I am killing lines/gates in our comps in England. Thanks to ROCK PIRATES. I'm really surprised HOW MANY PEOPLE in my country don't know about ROCK PIRATES UPGRADES ( THERE MISSING OUT!) REALLY hope you have a great weekend once again THANKYOU 🇬🇧🇺🇲🕊️✌🏼🤩🏴☠️☠️🤙🏼🤟🏼
Now this is the kind of video that really helps in putting a truck together, especially for newbies. Great video. Will be ordering parts soon. Thank you !!!!!!
I'm ready for the micro servo mount.
Very sweet rig 👌.
Wow now that's a build!
Thanks for sharing such a nice build. Love those smart servo's and they're mounted to such nice axles!!!
Thank you much!
Killer video/build Steve!
Thank you sir
What vanquish driveshafts are you running with the stretch?
I order my chassis from rc pirate should be here end of week
It looks like everyone is enjoying their Capra axled Interceptor builds so I figured might as well add another project to the 3 I already have going. Lol. I believe I ordered everything I need from ya to get started except for a front axle and trans. I ordered some high clearance links for a 12.8 wheelbase so I figured I’ll start there and see how that looks.
iam speechless ......
Nice truck, looks great!
Thanks 👍
Just bought the base camp sliders and they are amazing
Thanks, much appreciated.
These rigs look amazing!! I'm getting to do this build, which rock sliders did you use for this build?
Nice build
Thanks!
Nice build🤙
Appreciate it
I’m doing this build. Parts are great but one thing is the cross braces are much shorter than the width of the Capra skid, so you either have to put spacers between each end of the cross member and the rail or pinch the rails to meet the cross members. Puts a lot of strain on the rails and the skid. The skid actually flexes if you go this route. I put spacers in.
I’m trying to get everything ordered for a similar build. Can I ask what wheelbase yours will be? Mine will be between a 12.8” to 13” depending if I use the longer Traxxas Jato rod ends. I’m trying to decide on which driveshafts to order. I drive over the road so I was trying to have everything at the house when I get home. Thanks for info you share.
Hottdamn that’s a sweet rig
Thanks
Almost there, already have most of the build done. Ordered that new skid last week. Still in pre shipment atm.
Awesome, your going to dig the ride when its completed! Cheers
Any word on that micro servo bracket for the dig unit? Are you guys going to be producing it?
Looks like you have overdrive. what percentage? looks like OD portals and UD rear gear?
Hi there - great build! Is that Vanquish F10 or F9 portals?
Would the skids mounting holes match the standard 10.2 chassis mounting holes? I have a custom built rig that I'm converting to 4 link and was wanting to upgrade to this skid.
What driveshafts
What front upper link riser are those on the chassis?
👍👍😁😁
Are those Axles aluminum? Or hard Plastic? I'm trying to figure out on their website which to get, either the Portal kit or just the Aluminum axle housing
These are the aluminum vanquish F9 Capra axles
Could I use this set up with a set of AR60 axles instead of Capra axles?
What weight oil do you run in the FT shocks? Also is that the springs that came with them or did you change them out?
30 front, 50 rear. Stock springs. Pen spring mod in front shocks. Cheers
I have the same chassis same skid plate same transmission and I cannot get my fusion pro to fit
Capra axles
Yes sir!
Does anyone make a front custom bumper that you could use with this chassis?
I’ve been looking for the same thing. I like stock bumpers that come with the scx10 pro. I need to check if the are available to buy separately now. They are very low profile and I am surprised there aren’t several others just like it. It seems to me that most people don’t run bumpers or they will just put a chassis brace in its place.