How To Wire Multiple Receptacles
HTML-код
- Опубликовано: 13 июн 2024
- If you want to help support Shannon to produce more videos like this, visit www.house-improvements.com/do...
Shannon from www.house-improvements.com shows you how to wire multiple electrical receptacles. Video © 2014 SKS Media.
Videos produced by SKS Media (House-Improvements.com) are provided for informational purposes only. The information contained in the videos is intended to give general guidance to simplify DIY (do it yourself) projects. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, SKS Media cannot and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, SKS Media will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional. SKS Media conducts all matters in accordance with the laws of Saskatchewan, Canada. 
Хобби
You are the first person to show how to without missing showing a single part of the process. Thank you so much, you are a master at teaching us laymen/women
I know this old, but I want to thank you for putting out such a quality piece.
The best video I've watched. Finally someone that explains and not spends so much time trying to be a comedian. No stupid background music, just to the point knowledge passing on to the ignorant people like me. LOL Thank you sir.
I'm really impressed with how many times I watch your videos to help me do stuff around my home. Thanks eh! Oh, I'm Canadian too 🍺
Great Video. As a contractor, I am not a "professional" electrician, but sometimes do electrical work, same with plumbing and other trades. It is video's like yours that prompt me to do a more professional job, give my customers (and myself on my jobs) a better quality product. Keep up the good work, and thank you for going thru the trouble to make this video and educate us on proper technique.
except its not proper technique you need to turn your marettes upwards at all times incase water gets onto the wires, thats half the reason for a marett in the first place
What “isn’t properly bonded to the box“? The pigtailed ground was right, where is your fault?
The best instructor I have ever watched and listened
Your teaching methods are excellent. You're teaching an old man new tricks.
Thanks for sharing your knowledge brother.I do not take learning for granted.I know time is money and you showing this for others to learn is awesome.Take care from SW Pennsylvania.
I learned a lot. Thank you for the helpful information without background music. So nice and refreshing.
Shannon, thanks again for taking the time and effort making this video. I have leaned a lot by watching your videos. Keep up the great work!!
Time to lean is time to clean!
Thank you so much!! I've just started doing electrical work in my house as I got tired of waiting 10 years for my husband to put in a ceiling fan lol. But I've struggled so much with making the connections and getting everything to fit back in the box due to stiffness of the wires. You showed everything I needed to know, step by step, without glossing over things that are second nature to more seasoned people. I'm actually excited to see how my next project goes!
This is super helpful for a new workshop project. 12 receptacles, 2 switches, and 2 lights. Thanks!
- Thanx, Shannon, for always being so knowledgeable & thorough. Makes DIYing with a level of confidence.
Great video! Thanks for mentioning that you avoid using the wiring holes on the backs of outlets and switches. In our new house I've had five fail because of the cheap, thin plastic breaking off around the holes. Two caused some fairly dangerous arcs. I'm now in the slow process of replacing them all...
Very informative, i am just a home owner and this explained in detailed everything I was searching for. We need more local electricians in my neck of the woods like Shannon...
I always, always enjoy watching your thorough and detailed videos, and I so appreciate your dedication to doing things right. Thanks for making and posting!
Excellent again Shannon. Thank you! I really enjoyed this.
Thank you! Clear, concise, easy to understand.
You're welcome, Christine.
how can i install a ceiling light in a bedroom from a receptacle that already has 4 wires in the box. i want to add a bedroom light from outlet with raceway run
Again, Shannon your instructions are presented in a concise and unhurried manner. Thank you so much
I'm a teacher and I learned a lot from your videos. Keep them coming. Great tips and I needed a reminder about a couple of things. For my DIY, I'm now looking for your videos first!
Thank you for the video, very educational. Keep up the good work!
Congratulations my friend, your videos are very proficional wonderful, good audio, good image, and very well expricado, my dream is to work in this profession, thank you.
Helped out a ton. Thanks for making this.
This video was exactly what we needed to be clear on a complicated situation in our home. You are very clear and easy to follow. Thanks.
I learned my lesson the hard way when I did not use the pigtail method.
I originally thought that I had a bad breaker, but it took an additional 45 minutes to find the bad outlet which was causing the intermittent open.
Shannon, as a master electrician you are correct to be using wire nuts as well as screwing your wires to the receptacle. In the trade we call this a mechanical connection. The reason to use a mechanical connection is that they never fail. We have only seen them fail if the wire was nicked and the wire broke. Too many times we have seen the "push ins" break or make contact with the ground wire at the back since people do not strip the wire properly. It is also good to mention that the wire you strip does not exceed pass the receptacle as you possibly could short out the wire. I enjoyed your close-ups and explanations.
Thank-you for your positive compliments. I have found that many electricians only want to come on here and pick things apart.
HouseImprovements Shannon, all I can say about those people, is that they have never been in front of a camera and never experience how difficult it is to put a video together let alone remember everything. Keep up the good job and do the best that you can.
😂😂😂😂Master Electrician!!!!!^^^^^^^^^me too.....i change triple A Batteries....
If that guy is a master electrician, then I'm a billionaire.
Pretty clear and straightforward info. Nothing controversial here. Facts are facts. Not sure who's downvoting this.
This was awesome. Thank you so much. Very detailed and real. And it’s a plus you didn’t add any dumb music in the background.
Thank you Shannon!
love how you left that extra wire I don't leave that much usually
Best wire video on the internet. Clear and concise, and a great cameraman!
I really like the way he leaves a loop of extra wire for the future..
another awesome video Shannon you're the man I'm spreading the word!
This was very helpful, I will be using this information today Thanks!
I like your presentation method. No foul language, speak clearly and state reasons for your method. We all dont have to agree but we all have to respect your approach. But I agree with you well except the tape but no big deal. I am a PE trying to get my electricians license so learning the hands on part is invaluable.
Well done and informative. Although I've done many as a DIY homeowner and rental owner, I learned a couple of new techniques here. And that's what RUclips videos are for!
Good point on the receptacle orientation. Just this year I had a hack saw blade fall across the prongs. Arced real bad. It fell from a package on a wall and laid across the prongs.
Nice work and video. Very neat and organized. When installing the wiring on the receptacles, it should become automatic in one's memory to install the "black" (wire) to the "brass" receptacle terminal (screw) and "white" (wire) to "light" receptacle terminal (screw). Having worked in the nuclear industry, we were trained to E.I. Dupont codes which normally exceeded, or at a very minimum, met the National Electrical Code (NEC). The reason we placed the "ground" in the "up" position was exactly as you have indicated. When the "future" equipment cord is plugged into the receptacle, and the "ground" is positioned up, with the equipment plug not completely inserted (partially installed) into receptacle, and with the ground being in the "up" position, anything (metal) that may fall down toward the receptacle will contact the ground first; not the 120 volts (hot wire) or possibly falling across the hot wire and neutral wire (white) creating a direct short to ground circuit, and other potential safety problems. In our particular nuclear industry, when mounting any receptacle in a horizontal position, we would place the ground position of the receptacle to the "right" side of the horizontally mounted receptacle box.
So when placing the receptacle into a metal box, since the side of older metal boxes (and new ones) were so very close to the final screw termination; you might consider a couple of wraps of electrical tape. So before inserting the receptacle into the metal box, we would normally wrap a couple of layers of electrical tape around the "receptacle" so all screws/and wiring were totally insulated (covered) and mitigated the potential short circuit of the hot wire to ground (metal box which is at ground potential; or should be). Not sure of the new technology and constant upgrades of normal electrical tape (vinyl) but the older electrical tape was rated for protection of upwards of 400 volts.
The only reason for the above comments are strictly for "maximizing" safety for anyone and everyone that are DIYers. You are not trying to meet "nuclear safety standards" in your home wiring schemes, but the more protection and safety you provide, it might just save someone their life. It could be you or your family members. I have never met anyone that actually "knew it all" when dealing with electricity, but when I did meet that individual, I would move in the opposite direction and totally away from that person. This is a very good video and the way we all learn so everyone avoids a potentially hazardous electrical problem. Thanks again and please ignore any of the above if any of it is not helpful or to over the top. But once you work with electrical circuits, and learn good safety practices, you better understand why you might live much longer than not knowing "enough" details.
Excellent comment, I had forgotten that tape trick around the receptacle screws.
I'm new to this thread, so please pardon me for interjecting here. While I agree that placing the ground (round hole) up could help keep things from shorting across terminals, having the ground up would negate the use of those cords that have a zero clearance or low profile to them. Those things always have the cord come down at a right angle to the ground prong.
we usually use ground up for commercial installation, lots of metal plates, and ground down for residential.
Your videos are great, I really like you explain the minor details that newbies wouldn't necessarily know. I can't pigtail for example because I bought too small of junction boxes. That is a beginner's mistake. I bought my boxes at Home Depot before I had done any actual wiring so I didn't know. But now that I know I can just connect the wires directly to the outlet I don't have to rip open the walls to replace the boxes.
Very informative and thorough. I feel more comfortable with wiring now than I did after watching other people's videos.
I've read about 30 comments from novice to pro about this video. Some of the comments about the workmanship or technique made me think that the so-called pros didn't really know what they were talking about. I say, make your own video so that the rest of us can criticize your work and tell you what you're doing wrong. And why would a profession be watching a how-to video in the first place? My uncle is a retired electrical inspector with 40 years experience with small and big contractor jobs. He watched this video on my request and said that everything was done to code and he couldn't fault it anywhere. So why are the so-called professionals being negative? Well, my friend, that's all about their ego and they're not really professionals anyway. Otherwise, they'd be out doing a job somewhere rather than watching a youtube video, We all know that professionals love to come home after a hard days work or on their weekend off to spend their time watching videos about their profession. NOT!
+metaspherz Well put!
Adding a sub panel
No it's has nothing the do with ego for me. In this one if you think pigtails is the best way nock yourself out. Some places it's code. I just think using all four" terminal screws maker for a better job.
Dont they sell outletss that have terminals for all of them>? Seems cleaner.
+metaspherz Agree with you. I'm not a professional myself but I've read everything I need to know about wiring, including some of the codes (US and local). I can therefore appreciate the Professional job that +HouseImprovements is doing... Note that I've seen DIY jobs sometimes better done than specific professionals, mostly because they cared more about their work than the professional as it impacts them directly (and DIYers are more willing to spend a few bucks more than professionals). Love these videos from +HouseImprovements. Keep it up !
LOL not laughing at you, funny how we talk when talking to a camera, i feel ya. Great Video, Photovoltaic Technician / Electrician gives Thumbs Up. i Like, OLE!
Excellent video. Great patience and detail in explaining the steps and reasoning for each step. Thank-you!
Good job! I've been through many videos looking for this info. None helped but yours. Thank you.
Hes sooo Canadian haha i like the way he talks
He can't be Canadian, he calls wirenuts, "wirenuts', and not marette's..
joe banana he called them by both names.
Bob Ross and the Joy of Painting have nothing on Shannon. He's so relaxing to listen to.
I love the idea of addition loop in case you need to pull through later!
Thanks Shannon. I want to install a GFCI outlet on my porch in series to 2 more on my second floor for holiday lights. I felt a little nervous about tackling the project myself. Your video was very informative and helped me considerably. Appreciate it!!!
Absolutely Superb! No assumptions about what the viewer already knows. Big thumbs up.
Thank you
7:17 the tool that you're holding has a feature to make a perfect curl....
great video! This is for novice people. Electricians are knocking it because they want us to think it is difficult! Not really!!
Yeah and how many times i had to redo wiring and connections from do it yourselfers. Anyone who takes electrical for granted should make sure they have good fire insurance
Come succeed in the electrical field before you say how easy it is. I bet you don't make it a week.
@@adamglenn4403 Ha !
Hardly NOBODY uses metal boxes in a residential application
Allan Brown - and? You complaining about earning your money?
Great job explaining the steps! You really make it crystal clear!
Very informative. You have a great way of explaining things so that the average Joe can easily understand basic home wiring. Thank you for your sharing your knowledge and expertise!
The only time I've ever seen outlets mounted "upside down" with the ground on top is when the outlet is on a light switch so people know which outlet in the room is being controlled by the switch.
I tell people that all the time. They think it's a mistake from the contractor. Nope. Even mine that are controlled by a switch are right side up. Makes it challenging.
That's how we did it. I know a couple of "rogue electricians" that put them in upside-down. Looks like crap.
Shannon taught Chuck Norris how to improve his house.
LOL!
@@HouseImprovements , I have a manufactured home and one of the outlets under the skirting fried due to the stupid manufacturer not protecting the under outlet from the water heater , directly under the heater made it possible for water to soak the outlet thus actually frying the thing to where I can't tell if one of the jumber tab was removed or not but I tried to replace it and I got a big spark and popped the 15 Amp breaker , but this outside outlet is in the line of a series ? The power runs other outlets and the ceiling light In the bedroom and bathroom ? You didn't show the other side of the outlet here so I'm wondering if I need to do that popping the jumper tab off on one side or not ? I would like to send you a picture of what I'm dealing with but since I don't have any way to share it here , just trying to explain to you and hopefully u can give me a better explanation or recommend a video ? It appears that the current plug has 3 wires and a ground ? Thanks for your help and this is a great opportunity to show us how wiring works ! Great Video here ! Thanks for posting it
@@commonsense3673 same deal but trying yo figure out how to wire the light switches in series as every outlet or junction all have 3 wires
@@HouseImprovements whats the best way to wire the light switchs in mobile home. They are 3 wires out in a series. An that poses a problem at the light switches themselves???
@@joshford6064 best way to wire Anything in a mobile home, get someone else who knows how to do it 🤣 , all kidding aside, the big difference between a mobile home and a manufactured home is definitely the wall thickness which really helps when you have to get right in the walls and see what your doing ,
As always my friend, great video and tutorial. Something I like about you on your videos, is your patience to explain, all well detailed. Will now just have to buy wire and connectors and do my electrical work at home. Thanks, God bless you and your family and business.
Thanks buddy. The more I see your videos and the more confident I get to doing my own electrical work. You are clear on your explanation of connections. 👍👍👍👍
Thanks for the videos. Could you do a video of a room with multiple outlets, light switches and a couple lights all on one circuit?
I want to know how electricians install a junction box for hard wiring a ceiling fan if there is not one. Can you do a video over that?
+Matt Bruns I agree. I got this situation currently, and I am interested in furthering my knowledge and experience working with them.
You need a reinforced junction box, that is screwed securely to two ceiling studs.
It’s important to note that junction boxes for ceiling fans are different than junction boxes for normal ceiling lights. It you are trying to replace a ceiling light with a ceiling fan then you have to take out the junction box and install a new junction box rated for a ceiling fan. The reason for this is because normal ceiling light junction boxes are designed to hold a ceiling light which is much lighter than a ceiling fan so if you didn’t replace the normal ceiling light junction box with a ceiling fan junction box the ceiling fan would be heavy enough to pull the ceiling light junction box from the ceiling which is hazardous so with that said always replace the junction box when you want to install a ceiling fan
This was super useful; thanks so much for taking the time to set up this video and walk us through this. This is EXACTLY what I was looking for. Thanks again.
Thank you, you are helping thousands of people!
10:56 - "why is the ground down?"
Most installations in this area are like that... and its very common in North America. Some appliances have off-set plugs for low clearance areas (like behind a bookcase), and having the outlet "upside-down" may be annoying.
If you see it with the ground UP instead, it's likely set up that way by the installer to indicate a switch-enabled circuit. This is common in family rooms where you want to plug in a lamp and use the wall switch to turn it on/off. Also a neat feature for those with small kids (so you can deenergize the outlets near the ground).
That said... it would make sense to have the ground on top to prevent coins, paperclips, or other metal debris from falling between the outlet and a plug thats not flush... but we'd have to re-write a few decades of tradition. :p
This is a great comment! Hard to believe after 5 years this comment doesn't have 200 thumbs up. YT must be up to their trickery again.
yep, inverted outlet indicates switched outlet here.
How many receptacles can you run on one 20 amp circuit? How many on a 15 amp? Also , I understand hot and ground, but what is the role of the neutral wire?
vwdiesel101 Wow, thank you sir. That was an excellent explanation. All these years and I just could not figure out the neutral wire and its "role" in the electrical circuit.
+kevin S The NEC uses the 80% rule for load but does not comment on the number of receptacles on a circuit. Remember Ohm's Law and related calculations: Watts/Volts = Amps . So, if you have a 120-volt circuit and you plug in a 60-watt bulb, it's 1/2 Amp. But, if you plug in a 300-watt sweeper, it's 2.5 Amps. So, you could put more than a reasonable number of receptacles on the line if you want... just don't exceed the load. vwdiesel gives an excellent explanation on the system ground vs. case ground.
+TomKaren94 or you have 15 amps X 120 volts = 1800 X 80% = 1440 usable watts per circuit.
Is 80% to calculate true potential (taking loss over the run into account)?
Thank you.
I love what you're doing here, I'm learning so much from your channel. Keep up the good work
You do a great job in explaining this. You can watch a lot of video's and the ones that stick are done like yours. Good job.
@18:55 lmao "oops I forgot to mention to make sure that the power is off".
Me too😀
In California if you see upside down plugs it normally means that the plug is activated by a wall switch.
You’ve helped me so much renovating my basement. Kudos Man:)
It's nice to see someone matching the proper amp rating of an outlet with the appropriate size wire. I've seen many guys just wire a 15 amp outlet on the 20 amp home run. I pay particular attention matching outlets to the wire amp and gauge.
It's against code to have two seperate circuits in a double gang unless they're on a tied-double breaker, and I don't know how you're going to do that when one is 15 and the other is 20amp. The reason behind this, is if you're servicing say the switch and shut the breaker off for that, and overlook that the plug is live and dig into that box thinking it's dead. Twisted grounds have to have a wire nut on them, it's not an option. I'm not a fan of the electrical wrap unless it's temp. It can pose a fire hazard if there was a bad connection and it's completely unnecessary unless you've done something wrong. Inspectors will ask you to remove the tape because it hides the connections from being inspected.
I see your point on the "two separate circuits in a double gang box" I have never been questioned or called back on that before. Does it make a difference that the second item is three way switch? As for the tape the inspector has not ever asked me to stop doing that either. I believe every inspector has their own interpretation of some regulations so that may be the case here ,I can not say for sure. Thank you for your comments.
HouseImprovements Last night I was looking through my book and didn't find anything about multiple circuits in a box (I didn't look very hard) but I do remember that if you split a duplex plug so each plug is on it's own circuit using a shared neutral, then it's code to have the breakers locked together. Just makes sense there since there's one receptacle fed by two power sources. Maybe it doesn't break code to have 2 circuits in the same box as long as they're separate receptacles.. but I do see it becoming a potentially dangerous situation down the road when someone is replacing a plug or switch and shocking them self on the other circuit because they thought it was dead, or temporarily losing vision from the flash of light from the ball of molten metal flying off their cutters. But this just brings to attention to be safe and check there's no live wires before one digs into the project. :) And yes, every inspector has different standards. Some will just take a glance and some will dig right in and check your grounds, your staples, clamps etc. If you're comfortable bringing it to your inspectors attention, ask them about this and see what their logic is behind the safety of having multiple circuits in a box and report back to let us viewers know. I personally would advise against it unless the breakers are tied. I guess you could tie a single 20 and single 15 together with a bar. That way both circuits would be killed when servicing either. I don't know, give it a thought. Cheers!
ThePitx > You're right ... the home owner will turn off the breaker to the plug and he will get electrocuted from the switch which is not on a GFCI ... dangerous! I would of used 2 separate boxes. The NEC allows it ... but the NEC has many flaws!
xIntoThePitx If an electrician is meticulous enough to add tape, you know the rest should be okay.
Pigtail is fine if that's the way you prefer it. I would hook all four wires to the receptacle. Makes for a much neater job in my opinion.. If I have a receptacle go bad I want to know it. However everyone has their preference
Pigtailing is the best
@@imabushwacker
then why do the better quality receptacles have spots for 2 wires to tighten between square nut behind each screw?
@@imabushwacker
so only in that case you can have 4 hots and 4 neutrals on same receptacle?
@@imabushwacker
then why is there room for 2 wires on each screw? room for 1 feed wire in and 1 wire out to next receptacle.
I understand ground is required to be pigtails and only has one screw and no way to put two wires on it. The hot and neutral screws are designed to allow 2 wires per screw when they have two holes leading to between screw and nut that tightens against it. Very similar to industrial pushbutton control contacts. They always have room for 2 wires under hold down plate on each terminal.
I understand codes change and they make things that are not allowed as designed. example you can still buy non grounded receptacles yet. What is the code that says 1 wire per screw terminal even when designed to accept 2 on the receptacle types I'm referring to? until I see that I call baloney.
@@imabushwacker
heres an example of a gfci with terminals like I'm referring to.
ruclips.net/video/hdIh0aEcm2w/видео.html
installer uses one of the two holes available to insert and tighten down the screw.
I have a few boxes with twin duplex receptacles with these terminal types. First receptacle has 3 hot and 3 neutral wires on it. one from feed, one out of box to next receptacle on the two available slots under one screw and the other screw gets the wire feeding the adjacent receptacle.
Great video! Very thorough. I now have a good understanding on what I need to do to install some additional outlets in my basement. Thanks!
Shannon, you are the man! I like your calm manner and general presentation. This is absolutely what I needed and answered all my questions.
*MY* (WRONG) guess would have been black-white incoming on the top, black-white outgoing on the bottom. From what you said in the video, I think that would have been series, where a failure in one would take them ALL out?
Anyway, now I know how to do it the right way. Thank you!
Should of mentioned hang the drywall before doing any receptacle installation hahaha. I know it's demonstration but people might not know
@Sylvia isgod; People do this all the time... also your instead of you’re. Gonna rather than going to might already be in the dictionary. What happened to grade school grammar?
why? what if you're insulating the inside walls. woulld you not want the receptacle in place already so that you know where to place your insulation around it
@@Sunnsetter nope, insulation doesnt interfere, first you rough in the electrical wires, then hang drywall. After drywall is in electrician proceeds to install switches receptacles.
He knows that, he just didn't mention it
@@Sunnsetter you still install the boxes and wire, then insulation, them boxes, then insulation then drywall finally receptacles and wire them
he did mentioned it, if you'd listen (18.10)
The part of the wire nut that screws onto the wire should always be down incase water leaks into the box the water will not screw up the wires that are spliced together
If water is leaking into your box, wirenuts are the least of your problem.
Omg are you serious? If water is getting into the box who cares about the wire nuts, what about the outlet? So ridiculous
Recently watched other Vids on electrical hook up and this one is way above the others, explained well, shown well and leaves no questions in your mind at what or how to do the job correctly, my thanks
Hey Shannon,
Thanks for explaining all this details. This is why I keep on watching your videos.
I have learned a lot with you
Thank you so much 💓
you failed when you cut your wires down to 2 inches. minimum length of conductors left in the box is 6 inches. Also the holes in your strippers are there for a reason, use them to curl the wire.
For fucks sake! Maybe you take a pee sitting down and he takes a pee standing up, who fucking cares, you get the same results in he end! Just sayin!
3min. inches out.. from the receptacle. IRC2015
6min. inches out, from Service box. IRC2015
Been looking... What is the exact reference?
You make videos for newbies like me, very clear and precise video. Thank you again Shannon, love ur videos :)
Thanks for the video. I especially appreciated that you not only show what to do but also explain why it is important. Thanks again!
thanks
Perfect instruction for parallel wiring! Thanks so much!!
You are a beauty sir! Keep up the good work.
Nice simple explanation....recommend this to new D.I.Y.ers.
Shannon, this was an excellent demonstration of how to wire up sockets. In some companies, the upside down socket indicates a "switched" socket where normal installed sockets are not switched. This is an easy way to know where a switched socket is in a room. In some companies, the last socket in a circuit will be wired first, and the last socket that will be wired will be the socket that will be the supply from the breaker. Just another way of thinking of safety, just in case some one activates the breaker while you are working.
Thanks TED
Thank you for putting this in the web!
Very nice job and well explained. Thanks for the great work.
Thank You Shannon great info and demonstrations. Going to do my house feel much more confident with your videos.
Dude! I appreciate what you do! Already watched one or two of your videos about vinyl siding.
Most videos in here, about the same topic do not use the electrical tape on their switches. You did. Very well done and if it was me, I'll do the same. Thank you for your positive and most educational presentation.
Thank you very much for taking the time and effort to make such a clear and informative video!
Hi Shannon. I've watched several of your videos and find them very informative and easy to understand..... even figuring rafters haha!! I am from Tennessee in the states and have been doing home improvements for several years now. I know that I do a lot of extras that are not particularly called for but are for added convenience such as your wire loops (which I do now) and for safety. In wiring such as in this video, I use the green nuts with the pass through allowing the pigtail wire to pass through the end of the nut to attach to the ground. Also I routinely wrap the back end of the nuts with electrical tape because I've found that over time, the constant voltage can sometimes work the wire nuts loose. Just my little extra to share with you. Great job, videos and contractor! Keep it up.
Thanks for taking the time to make this video. It was very informative and very helpful!
Awesome video - thanks for helping all us DIYers out with clear, concise instructions. I've watched a couple of your other videos and all have been informative. Thank you kindly sir!
You're very welcome!
Once again great tutorial Shannon,i really needed that refreshman.Thanks
Shannon thank you so much for these videos, you are doing a great job! God bless you man!
Thank You for posting this informative video. I am replacing a few outlets and will use the tips you shared.
Drip loops are always a good idea.
This helped out so so much ! Keep posting and I have to look for one that includes the wiring of a switch with a fan and dimmer !!!
I love the idea using pigtails.
Thank you - I'm getting ready to wire up my workshop. This is definitely a good help. Thank you for explaining the pig tail - did not think about the outlet shorting out and killing the rest of the outlets in the chain.
Good luck, be safe
The benefit of pigtailing the outlets on the same line -except for the last outlet of course-, is to avoid -should there ever be an overload/a short on one receptacle- the incident won't disrupt or malfunction the other outlets on the same line. Glad you made this point!