BMW ZF Transmission Service (Fluid, Filter Pan, Mechatronic Seals / Sleeves)
HTML-код
- Опубликовано: 28 авг 2024
- Full ZF transmission service on my BMW including new transmission pan filter, bolts, transmission fluid, valve body bridge seal, mechatronic sleeves and mechatronic plug connector.
The following links are affiliate links that the channel recieves commission for
Link for this service kit: ebay.us/9PtQSp
Link for oil pump: amzn.to/38NjG4i
Website: www.gearboxoils...
Contact details
Phone Number: 02085395376
Email Address: info@gearboxoils.com
Instagram: www.instagram..com/gearboxoilsltd/
Twitter: / gearboxoilsltd
Facebook: / gearboxoilsltd
Patreon: / georgeausters
Tools I Use!
Small Impact Wrench: amzn.to/2T4igdi
Big Impact Wrench: amzn.to/39NOrEu
Sealey Impact Socket Set: amzn.to/3a8zcpQ
Torx Socket Set: amzn.to/32EbnDV
Female Torx Socket Set: amzn.to/2PzAZMQ
Torque Wrench: amzn.to/2VF0YpI
➢ Subscribe For Regular Videos ➢ goo.gl/x0Juyl
➢ Instagram: / georgeausters
➢ Facebook: / georgeausterspage
➢ Email: GeorgeAusterberry@gmail.com
➢Amazon Prime Free 30 Day Trial: amzn.to/2v6kVe5
➢Best Place For Car Parts: bit.ly/2swCcMz
Link for this service kit: ebay.us/9PtQSp
Link for oil pump: amzn.to/38NjG4i
Hey friend could I use AMSOIL Fuel Efficient ATF in this? Idk if I should mix fluids but it’s an amazing fluid.
I need the same kit for 8hp45, I can t find it anywhere, can you help me?
@@emy2569…calendaring,😊😊(ż😊😊Z😊go off sad ffT😊😊😊🎉😊 f 😊😂f😊🎉😂fffgfttf😂😂😂😂tt😂f😂😂f
😂
@@ryanjohnston4828 why are you laughing?
A tip for filling transmissions: Go to your local garden store and purchase a 5 gallon insecticide sprayer (the kind that you hand-pump to build pressure). You can bend the end nozzle into a "V" shape so it hangs onto the fill hole. Put your ATF into the sprayer, pump it up, and then let it fill the transmission for you.
Cheers Mike, I followed your advice and purchased a 5 litre weed sprayer like you mentioned. Was a little sceptical when I got it home, but after opening the mesh pick-up feed pipe inside the bottle and fitting an old coolent return pipe right after the trigger nozzle instead of the plastic Lance, it worked a treat and took no time filling almost 7 litres of gearbox oil. Thanks, similar sort of systems on Amazon cost 80 to 100 dollars.
@@mkm7962 Glad it worked for you. I have several that I use with different weight oils/gear oils. It appears that your store sells a different kind of sprayer, as the ones over here have no mesh pick-up, it's simply a stiff plastic hose that runs the length of the sprayer bottle to the bottom where it picks up the fluid.
@@mikek1187 Do you have a link to one that you recommend? I'll be servicing my ZF6hp19z gearbox. It uses ZF Lifeguard 6 fluid. Thanks
Or just buy a electric pump for $20, fills with the press of a button.
Now that is an engineer’s thinking right there.
Good to see I’m in an elite group of people that spills oil regardless of how many times I’ve done a job or if I take preventative measures. The stuff is just like flubber, it likes to get out!
Absolute awesome 👌, I've serviced my 330d gearbox, replaced all the sleeve, solenoid were cleaned, torqued megatronic unit screws 6nm since few were loose on the corner, at 110k and made a great improvement. Don't listen BMW, service the gearbox subject to no underlying issues, slipping, etc...
Hi, are you in UK and where did you go to get all the work and how much did it cost. I want to service my ZF 8spd transmission, I am from London. Regards
Great job. Very informative and huge props for doing it on your drive and not on a lift !!
Couple of pointers. Take that little yellow plug out of the top of the drain pan to help the fluid get into the pan. Also be advised that you will ALWAYS make a mess no matter how wide of a catch pan you have. Nice video man.
Your edits of torqueing clips are so satisfying😂 love that sound. Great video as always!
Glad you appreciate it 🙌🏼
You can back the bolts out further at the drain side and just let your pan hang at an angle. that allows more fluid to come out before removal,
I’ve been waiting for this video. Can’t watch now but can’t wait. Cheers mate as was planning to do it myself but change solenoids also
Good stuff, cheers Marc!
We stock the solenoids for the ZF 6 Speed Transmission also!
Let us know if you need any help
Ordered my replacement ZF 8HP kit for my F30 335D x Drive from gearbox oils too by chance a few days ago. £270 delivered. The garage that's doing the work quoted me £350 for the kit alone so there's a £90-£100 markup on the kit depending on the price they buy it for. They're fitting it for £120 incl VAT.
Always a good sign if the car tutorial has a cut where it's switches from daylight to midnight lol But nice video, doing it on an Jaguar s type R, getting this connector sealant tube in is really not easy. Needs a lot of force because the new gaskets on it are so tight and "fresh"...
Takes a lot longer to do the job when you’re recording it👍🏻
I litrerally did mine about two weeks ago.
Got all ZF kit with all the lifeguard oil. Comes with bolts and new sleeve.
And genuine Bmw/zf adaptor and tubes.
P.s if you have the car higher at the front while you dismantle then you can drain all fluid from the torque converter so to drain 90% of old oil and then put car level for filling.
I used the obd scan tool to check oil temps where 40degrees.
Yes most fill plugs are that tight my friend! Lol
Just as well I didn’t drain anymore to be honest as I was only left with 200ml👍🏻
That’s weird. I used all the oil to the last drop. The ZF kit comes with instructions as you probably know.
The entire system holds around 10L
hello m8 , when i got the car i noticed its had a trans oil leak looks like over long period ,so ive no idea what amount is in there only 2litres came out so i put 4 litres in for a "flush" then 3 and 1/2 lts came out . SO Now i dont know whats in there ,left. are you saying if i now jack car up from front all the oil and remaining oil will come out ? leaving probly 1 to 2 litres thats trapped in variouse places ?
The perfect explanation of what to do even do to the screw type. Thanks. Your video was extremely helpful. Keep it up
Thanks!
WISH I'd found you earlier, I changed the oil and pan etc today but didn't know about the rest. I'll leave it til it plays up or I put a few thousand miles on it.
I can only say that I'm so impressed with you and your professionalism...your parents must be proud!
Obviously I will be saving you in my favourites. Best wishes for your career, you'll go far.
Thanks Tim, appreciate it!
Very good, thank you. Just the little bit of extra info I needed. I have a Jaguar S-Type 2004 (same 6hp24), and without driving it since I made the first ATF change a couple of month ago, I am currently on my 3rd ATF change... Reason: After the first full flush I had to be taught that I cannot use a multi-vehicle ATF, which claims to be like Lifeguard 6, thus another full flush flush, putting Lifeguard 6 in, (and I already changed the sleeve) and then I learned that those bridge seals like to break. I do not think, mine is broken, but I don't want to risk that it breaks soon...: Thus: ATF change No.3 to swap the bridge seal and those 4 tubes. Obviously, I will reuse the just released Lifeguard 6.
When you’re using that drain pan you’re supposed to remove that yellow plug to allow the air to escape and prevent that gargling effect 👍🏻
Thanks for the video mate
Yes that’s right, not sure why I forgot to do it lol
@@GeorgeAusters will this help me out aswell? My reverse takes 3-5seconds to engage and my 3th gear does bot properly engage sometimes, i’ve been thinking about doing all this but only if the problem will be solved
What yellow plug is he referring too
@@JohnDoe-xb7ov I think he is referring to the yellow plug on the waste oil drain can.
I must say I was going to mention that.🤣😅
Thank you George for this video , I do feel for you recording and filming this in the cold for us .... Once again Thank you !
Appreciate it!
George, tried today to change the fluid on my X5, e53, 3lit diesel,facelift 2006.
The fill plug appears to be on the bottom of the sump, a 17mm hex, the drain is right beside it, poss 8 or 10mm.
I bottled it as i didnt want to touch that fill plug as i didnt understand how it works ??
Found other youtuber with same fill and drain plug position so have now gone ahead. 4 litres came out, and when i put 4 in it started to overflow. So happy at that !! No taking temp of atf or ista !!!
Great video. I need to do this to my e89. I’m intimidated by ISTA but then again, I’m 63.
Have done this procedure twice on my E61 525d already, 3'rd time coming up this summer. But only did the sleeves, seal and plug connector on one occasion. Probably one of the most important service procedures next to changing engine oil that you can perform on your car, if you plan to have it last for long. Mine has gone more than 225.000 miles by now.
Good to hear!
Great to hear. If you need any parts, advice or to check which parts you need, we are happy to help!
I have a leak on mine. Not sure where it's from.
Thanks for making this. I wish you had shown the valve body screw tightening sequence, or at least said where you found it or what you were referencing. The pan sequence you explained. I have an '07 750Li I bought not long ago and it's my first BMW. It's actually the first car (sedan) I've owned since my '71 VW Karmann Ghia in '95. I'm jealous of your V12. There aren't many here in the U.S. Oh well, I would probably be afraid to buy one if I found it, I'm already facing the alternator bracket gasket, this trans service, and I'm pretty sure the Guibo joint. Might as well change the support bearing while I'm doing the Guibo.
Now that you've shown how much fluid it takes, I think when I do mine I will buy 8 feet of plastic tubing and stand beside the car, using a small funnel to pour in the tube, and let gravity do its thing. I'll blow the last little bit in, to empty the tube.
Nice, I will be doing this soon on my 2017 F30 335d. Great informative video as always George 👍🏻
What a great informative video, I have a great respect for your efforts in showing this not so easy task under difficult conditions ie room to work and ambient conditions.
Open the vent on the container to avoid the bubbling. Before dropping pan, loosen 2 near drain plug, tilt pan toward plug, then remove plug. Should be able to drain more fluid that way.
Yes, tried this, but I took this idea farther, because as described, additional is only a small volume of fluid (when I created tilt by only slightly loosened the one remaining bolt at the end opposite from the plug, then loosened more the one remaining bolt at the end near the plug.) From there, with the plug out, I supported the pan with one hand, while I removed those two last bolts, and did a controlled pour, through the open plug hole, by tilting the pan over my catch tray, and managed to get a significant amount of fluid out, not all fluid, but much closer to empty. I feel that this was easier than wrangling the pan with more fluid in it.
great job on your camera angles and explanation. All of your videos are of great explanation and clarity. Thanks very much.
Appreciate it Jim!
Fantastic video and great insight, wished my mechanic watched it first before ballsing up the gearbox service!
Oh wow.. Yeah it's not something you just want to blindly attempt!
Love ur videos. Very informative! I do applaud u on doing everything on jack stands 👏🏽👏🏽👏🏽
Very useful and detailed video - have the ZF8 box for my BMW F07 and wanted to change the gearbox oil (only). Very similar set-up as regards draining & filling, and running engine to temperature as shown on this video. +++++ .
Well done mate I'm gonna do my zf8 soon got the new pan gonna buy the oil soon and throw on my neighbours ramp at his garage my spine is knackered so I can't be crawling on the floor hope mine goes as smoothly as yours👍
We sell the oil separately also, let us know if you need any help and we will be happy to help!
@@gearboxoilsltd9848 thanks wasn't expecting a reply how much do you charge for zf8
Definitely the best video on youtube showing this entire procedure!
Great video, thanks. I will be buying this kit for my car. My transmission is not shifting properly
“What are you doing with yourself if you haven’t got ista”
Love u man 😂
I felt it in my soul, I’m that guy 😢
Awesome work! That was some difficult work that you made it look easy.
Thanks a lot!
مبدع كريس اتمنى تترجم مقاطعك للغة العربية 🎉
Btw that box is in good nick!
Those magnets are pretty clean!
No large swarf yeah and no gold flakes?
Oil wasn’t burnt or black so no bad mate.
That’s good to hear!
Top notch video. shame about RUclips inserting ads
Thank you man. Ads are how I’m able to fund these videos, as well as donations etc from viewers👍🏻
@@GeorgeAusters Ah right sorry thought RUclips did that. great video again, it made me think twice about giving me car to non specialists.
Smashed it keep up the work rate mate
Thanks mate🙏🏼
Great vid George that's another job to do on my e61
Glad to hear!
We're happy to help if you need parts for your e61!
Need to do this on my E61 520d as well.. must look into a service kit and have a go at this :)
Nice one George, I will be doing the exact procedure on my E60 535d on ramps and axle stand's on my drive. Your 'no b-s' straight forward video shows how easy this can be compared to a sponsored garage video which made it look like a tw*t of a job. Will definitely be looking to source the parts from your link also 👍
Appreciate that mate! Best of luck👌🏼
What a faff doing it the ground I bought a 2 post ramp best thing I ever did
Yep the plan is to build a garage and buy a ramp when I get my own house.. How tall is your garage?
open the air hole on your drain pan and the oil won't bubble as it goes down
Good job mate. I’ll be doing a gearbox service on my e60 soon. 👍🏻
Good stuff!
If you need to know what parts your gearbox needs, do not hesitate to contact us, we're happy to help!
@@gearboxoilsltd9848 I got all the parts I need for the service.
@@gearboxoilsltd9848 i need transmission solenoids for my 2008 bmw 550i. Can you help?
Nice video mate, planning to do a service on ZF 6 speed in my X3 soon and this will help a lot!
Glad to help mate!
Let us know if you need any assistance for parts compatibility, we're happy to help!
Perfect job George 👏
Thanks bro🙌🏼
George whoth is working temperature, fluid in girbox?
Haven't checked to be honest.. Likely similar to coolant / oil temps
Thanks George 👍
Best video to date 👊🏻👍🏻
Cheers mate👌🏼
Great video, but I never understood why ZF put fins on their plastic transmission oil pan. It’s not like the plastic can easily remove heat.
One of the best vids so far.
Cheers Stu!
Great video. Local Indy wants £660 for this job.
Good job George, should be much better now
Yep, can’t wait to get it on the road and take it for a rip!
You are the man !
Excellent performance, very professional video! 👏👏💯
Thanks👍🏻
Very well done George, you have alot off bottle lol
Not too bad of a job to be honest if you don’t mind working in tight spaces👍🏻
a detailed and clear explanation thank you for the information
Thanks!
"This is my first time doing this" then says "you have to go genuine/oe parts, trust me".
Sorry sir, but on what kind of basis do I trust a man who has not done the job befare, then says trust me, like you have experience ?
(I’m joking)
Great video!
Probably covered but don’t see a comment about the fluid. It’s not an oil. Does draining the transmission also drain the torque converter of fluid also? If no, how much would you guesstimate is left in there before refilling. 👍✌️🇬🇧
I wish you are somewhere near to me. I like your work , my BMW's ZF needs service...
If you need parts, we can absolutely help!
Is your dad Carl Froch ? (the former professional boxer).
Seriously, you look so much like a younger version.
Thanks for the video, very handy and informative, my auto M140i is only on 22k but I plan on having the ZF8 serviced at 50k.
supirsed that nobody said that the torque for screws are "8 plus minus 0.8Nm" NOT "8+0.8 = 8.8Nm"
I have my shifter lever in the slot where it is suppose to go but now my car starts but won’t shift out of park
I got the ZF8 in my 120d so it's just a filter and oil change for that I guess?
If you have the ZF 8 Speed transmission, we also stock those parts.
If you want to be sure, please do provide us with your registration and we can help you!
🙌🏼
@jester26uk yes, it is exactly the same procedure, only using ZF8 oil. I'm nearly secure that the oil filter fan is the same. Ony difference is that the ZF8 does not have mectronic sleaves as in the zf6 gearbox so in fact it it easier to go.
GUYS NEED HELP!!! I have a 2005 e90 320i SE 6 Speed Automatic with 78000 miles on the clock, still a baby but has now started to have jerky acceleration, and jerky gear changing. Have had the transmission oil changed, gearbox sump pan changed. Spark plug, coil pack changed, DONT KNOW WHATS WRONG WITH IT AND IM AT THE BRINK OF SELLING IT SOMEONE PLZ HELP OUT!!
Nice one George. I've been dreading doing mine but you made it look relatively easy! PEACE
Yeah the most important thing is giving yourself as much space as possible👍🏻
To help make things easier, we can confirm what parts your gearbox needs. Let us know if you need any help!
Nice job on that, enjoyed it thanks👍
Thanks mate!
Was there any reason you did not change the soleniod valves ? What was the coil resistance measurements ?
You are braver than me, this is one of the few jobs which I would get a garage to do. Has it improved the shifts at all?
I’ll know once I get the car back on the ground, just doing a bunch of other jobs while it’s up in the air👍🏻
Good job! But this isn’t actually a full gearbox oil change, it’s partial change. For the full oil change there is a special device. You’ve done about 90% change.
Of course, there is fluid in the torque converter still. The entire system holds around 10 litres but you get 7 litres with the kit to do this service
@@GeorgeAusters yes, I mean you named the video “full service”
@@BUTAJIUK It is a full service meaning doing all the seals etc. I never said I was draining 100% of the oil👍🏻
@@GeorgeAusters OK. Really good job!👍🏻
Great job George, very well conducted as well BUT I would never recommend doing it on the open space (how windy it was on that day?). You don't want any dirt to get inside the gearbox, around mechatronic. Also @BUTAJIUK is absolutely right - you have only refreshed an oil - still around 3-4 Ltrs of old oil have been mixed with your new oil :( How would you feel leaving 30% of old oil in your engine? DYNAMIC oil change with the specialist machine is the only way of replacing complete "full" oil in the automatic gearboxes. Saying that - George your skills are great and your video is very good indeed.
Nice work. I thought I read somewhere the solenoids were prone to failing, or some of them. Did you consider replacing or having them tested or rebuilt? Also there are some "advanced" upgrades inside the valve body, to fix known issues, did you consider those?
Get a cheap electronic oil pump from aldi/Lidl , they cost about £10…. Saves a ton of time
I watched a video about oil cooler for Zf gearbox means that oil level may still be too low and needs checking again when car is much warmer??? Means that oil level may still be low after adding it twice
How can you tell when the solenoids should be replaced? Would it generally trigger a code or is it something that should be done after a certain amount of miles? I have the XHP transmission flash, (stage 3)and has ran rather well with only periodic aggressive driving. I’m going to be doing a flush and replacing fluid/filter soon and curious if I should be purchasing new solenoids. I have noticed a bit of hesitation in shifting, as of late and not sure if performing the flush will take care of it or not. Thanks in advance if you have any advice!
do you know if this is the same procedure with slave seals for the ZF 8 speed? also do you not need to reset limit counter on this one via scan tool? (In volvos you have to although thats an aisin transmission)
Hey, do happen to know where the output shaft speed sensor is located on this transmission?
was prob shifting like shit before it was done in 2017 - the oil will be fully clean now its been done twice
Yeah that was possibly it’s first ever service at around 95k-100k
I'm missing one thing in this process and in the comments.
I would like to know the adaptation values you can measure before the oil change. To this I would like to see the age and mileage of the car.
Now i have an X3/F25 30d 2011, 251,000 km, and some of the adaptation values indicate some leakage in the gearbox. I have googled quite a lot, but I can't find an answer if the mechatronic should be repaired or not, or can I drive another 50,000 km, that means are the values too high or not.
Great video, my car range rover 2006 ZF transmission. The D automatic drive stuck at 3rd gear, but the standard S is working fine. I can shift all the gear to run the car. If I do not replace the rubber tube as this video, will the standard shift will stop working when the rubber tube getting worst?
I really need your professional help please, my 730D E65, the gear indicator is flashing, and I've got a transmission fault, drive moderately. If I service the gearbox would this help at all? Thanks
Hi I’ve just done a gearbox oil change on my n47 since then I’ve had juttering in high gears and low revs and can see it going up and down on the revs and also feel it…. but is sport with high revs drives fine and changes gears fine in manual any advice
My jeep grand cherokee 2014 is stuck in park. Any advice?
When I done my bmw 530d I put an extra 0.5 litre of oil in the automatic box. On the ZF service manual it says there is a vent on top of the gearbox 👍 better more than less
Really you want just the right amount as too much oil can cause overheating issues
@@GeorgeAusters I found after the oil and filter change. It was holding on to the gears and the changes were terrible but it fixed itself after 30 miles of driving. I’ve had no more problems and it’s cover 35k miles since the oil/filter. 🥴
Where are you based please
Great video!! 8 months later, how’s the car running?
Yep no issues with transmission
Fantastic video! Thank you. Subscribed. I gotta hunt down those case seals now before I drop mine. How was it afterwards?
Thanks! No problems so far👍🏻
Hello
Isn't that Hyundai's oil?
Nice work buddy
Thanks 👍
Replaced valve and sleeve but car won’t start now any idea why?
very good one bro i may do on mine f30 in summer time thanks bro
Thanks mate. Definitely recommend doing it, give Gearbox Oils Ltd a shout!
We're here to help!
Sou do brasil , preciso fazer na bmw 120i 2009 câmbio 6l45 , será o mesmo procedimento?
Thinking more about this, I am concerned about getting the plug adapter re-installed. If you loosened the exhaust pipe, would that create more room to maneuver?
Possibly
Saludos tengo una Ranger Rover 2006, sucede que al pasar de 1 a 2 o viceversa, andando poco lento me golpea o me da un clong, que podría hacer al respecto, ya le cambié filtro y aceite pero sigue igual, gracias
Does this help the car not shift so hard?
Hi, on an 8speed ZF transmission, they recommend 60.000 mile flued change, but what about age if the car has only covered 40.000 miles and is 7years old
Wouldn’t hurt to do it now👍🏻
Great video
Super work George, the detail you provide is spot on and very helpful for when us DIYers would be tackling some of the same scenarios. Did all the seals/gaskets also come with the kit from GearboxOils or are they additional ? The parts are not explicitly listed as part of the kit so just wondering. Once again, quality content, thanks for sharing.
After checking the link you provided, the additional sleeve, adapters and seals are provided. Will certainly be checking GearboxOils out further.
Cheers Padraic, means a lot mate!
@@padraicgarvey9902 Thank you! If you ever need help, please do not hesitate to contact us. We are happy to help
Some kit comes with a oil,screws,filter pun and that plastic plug fram only
Was there any malfunctions in the transmission or any problems that could have been caused by that broken adapter seal or was everything working normally before servicing the transmission?
I never got to drive the car much before doing this service but I didn’t noticed any faults with it
George, started watching your videos and I'm really getting hooked as I own an older 530 diesel individual. Mines also auto and runs very well at 160k and in fact glides lovely. My question is if its not broken is it worth doing ... seems like a big DIY job.
I need help finding which solenoid kit i need to use i have e91 with m47n2 engine its 2007 pre lci . So far i finding for n engines with zf transmission im not sure if the solenoids fit for my car
I need information .I have a a mint 1999 728i it was services in january .gearbox engine oil and plugs . its so quiete .its 100,% done . mint green . but it has started to stick from park to reverrse then sticky to drive then back to park wooden gear stick ,is sticky it drives so brilliant andd shifs so quick .just sticky when i press the button to shift the gear selector . only started last week . .
Excellent video very informative.👍
Glad you liked it
thanks, great job
Glad it helped!
what problems u get if that rubber part is crackt ? valve body seal and what is ur KM the car has driven ?
I am from iraq . i love you so much because i learned so much information from you . and i wont yo buy bmw f10 exactly n52 engine so if you can make videos about that . and thank you very much .
I'm curious - if you went in this far, why not replace the servos too? Not that much more compared to the labor getting tomthis point, and I understand they are easy tomdo and age like all the other serviced parts....
Do you mean the solenoids?