【ミニ四駆】Tamiya Mini 4WD Build: Super 2 Chassis Advanced Setup Part 2
HTML-код
- Опубликовано: 8 июл 2019
- Part 2 of the Super 2 Chassis Advanced Build Series. We go through building the Transmission, Front and Rear Bumper, and Roller Mounting work.
Part 1 • 【ミニ四駆】Tamiya Mini 4WD ...
Part 3 • 【ミニ四駆】Tamiya Mini 4WD ...
Part 4 • 【ミニ四駆】Tamiya Mini 4WD ...
This video is made in partnership with DXN Provisions, Mass Damper, and Black Fabrica.
Check out Ferrimiche's store
pimentoso.bigcartel.com/products
USE DISCOUNT CODE "Z3NBLUSTER" TO SAVE 10% ON SHOP.MASSDAMPER.JP PURCHASES!!!
Shop
dxnprovisions.com/
Race
/ tamiyamini4wddojo
Apparel and Swag
massdamper.jp
Accessories
blackfabrica.com/
Forums
www.m4race.com
nice video!
Keep up the good work jan !
oh yeaahhhh!!!
front Damper with Super 2 Chassis Advanced Setup plz
waiting for the track test video
The S2 roller settings, it's ok if we race it on a 5 lane track?...oh it's better tu have a width roller setting when racing on 5 lane track...
Hi Jan. Can you tell me diameter of wheel set you use
What type of liquid did you use for the bearings and roller? Thanks
Ronsonol.
Amazing job! Just a question, there's a reason about the choice of those wheels?
5-spoke LD because Super 2 is kind of low in terms of clearance already. If I used Medium diameter trimmed the car would get too close to being too low.
Hi Jan, I noticed that the front wheel shaft you only use one white motor spacer behind the 620 bearing without the bearing roller spacer as the back wheel shaft, you indicated that you use two white motor spacer behind the 620 and I noticed you put the bearing roller spacer for the back shaft. Does this apply to both sides of the wheel shaft or just the right side only? and is there a reason being for you to put the bearing roller spacer for the back and not for the front shaft?
Only the side where there are gears next to the bearing.
Hello Jan could you please tell me where can I buy a roller ángel adjuster: thank in advance. Happy 2021
Dxnprovisions.com
Hi Jan, is there a part 3 for this video? always watching all your tamiya build. Keep up Sir.
Yes, it will be posted late Saturday night Pacific Time.
hi z3n i have question FMA can use Propeller Shaft from s2 ar ? if i don't have super x Propeller Shaft
Not S2. The AR hollow propeller shaft with the blue gears will fit on FM-A.
@@Z3NBluster Ok thx for ur answer. hope u healthy
do one advanced build for FMA please
That is the last project in the advanced series. S2, MA, and FM-A
Very well informed build, Jan! Question, the front bumper used a popsicle carbon plate right? Can I stack 2 popsicle plates to double up it's durability? Thank you by the way.
If you're using the part I specified in the video, carbon should be strong enough that you won't need two of them.
@@Z3NBluster Oh ok. Thanks again by the way!
Wait.. Is 2 rollers in front legal on race?.. Gotta watch it
LOL. You should look up the current Tamiya Mini 4WD Rules. They were changed in 2018...
@@Z3NBluster they are legal now?? Holy cow?!?!?!
@@Z3NBluster just saw it.. Thank you Z3N Bluster💕