I'd love to request a more in-depth video of this build, this is exactly what I'm looking to do but I'd be interested in perhaps you walking through the build and some explanation of how the parts were used, an "explain it like I'm 5" type video would be excellent. I park my runner in the garage and can't leave cases on top when I do. Great work.
Great idea - thank you. Did you install the floor guides because you have issues with it moving forward (abrupt stop I'm assuming) and the toggle clamps were not strong enough?
This is DIY, so nothing about compatibility :) there is (eo)2 company that makes quite interesting flat mount brackets for boxes like this, but when you buy all 3 components it gets quite expensive. They sell separately plate that goes on the box, plate that goes on the rack, and you have to have flat mounting plate from Prinsu….
All from Amazon :) 4 x Toggle Clamps - www.amazon.ca/gp/product/B07CYQZM1P/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 2 x Floor door guides - to be sure it does not move forward - www.amazon.ca/gp/product/B07FBGG835/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 4 x Wire lock pins - to be sure latches don't unlock - www.amazon.ca/gp/product/B07KN4TGWG/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 Aluminum plates to increase surface from inside the box. - (had this for another project) www.amazon.ca/gp/product/B09Z23FSXD/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Bunch of bolts and rail buts
@@LekoOffRoadit doesn’t matter you locked or not, someone just unscrewed the latch(the bottom part), your box would be gone immediately, no need to cut 🔒, only use a screwdriver with an suitable screw bit.
Bruh.. thats the kind of idea and parts Ive been looking for. Thank you!
No problem!
I'd love to request a more in-depth video of this build, this is exactly what I'm looking to do but I'd be interested in perhaps you walking through the build and some explanation of how the parts were used, an "explain it like I'm 5" type video would be excellent. I park my runner in the garage and can't leave cases on top when I do. Great work.
Noted!
Agreed I want to know what bolt sizes and rail nut used I have this same rail and I can't find any information on what to buy.
Great idea. If I'm going to have to drill holes, this is the way to go.
Perfect! Just what I needed for an upcoming trip. Thanks!
I’m trying a similar set up on a pelican case next week, thanks for the inspo!
Great execution and to the point video
10/10 very good system. Super clean and effective
Glad you like it!
Very, very smart. Thank you for sharing
Thanks!
Exactly what I was looking for. Thanks for sharing.
Great to hear!
Great idea - thank you. Did you install the floor guides because you have issues with it moving forward (abrupt stop I'm assuming) and the toggle clamps were not strong enough?
Interesting idea. I like that locks can be used to secure the set up. Question: Is the case intentionally tilting toward the front of the vehicle?
No, my driveway is uphill :)
Excellent idea!
Glad you think so!
after a year of use. how's it holidng up? what types of trails do you go on with it up there?
where are you attaching the floor door guides at?
good
I have installed a prinsu rack. in my 2021 4runner TRD off road primiun. what kind of cargo box . It is compatible to use in the raka prinsu
This is DIY, so nothing about compatibility :) there is (eo)2 company that makes quite interesting flat mount brackets for boxes like this, but when you buy all 3 components it gets quite expensive. They sell separately plate that goes on the box, plate that goes on the rack, and you have to have flat mounting plate from Prinsu….
What is it called?
Huntshield All-Weather Single Gun/Rifle Carrying Case, 42-in
www.canadiantire.ca/en/pdp/huntshield-all-weather-single-gun-rifle-carrying-case-42-in-1759122p.html?rq=rifle+box#srp
@@LekoOffRoad thank you sir. Appreciate it.
Carta abierta con los tigres del norte
Where did you get the hard ware for this and what are they called?
All from Amazon :)
4 x Toggle Clamps - www.amazon.ca/gp/product/B07CYQZM1P/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
2 x Floor door guides - to be sure it does not move forward - www.amazon.ca/gp/product/B07FBGG835/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
4 x Wire lock pins - to be sure latches don't unlock - www.amazon.ca/gp/product/B07KN4TGWG/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Aluminum plates to increase surface from inside the box. - (had this for another project) www.amazon.ca/gp/product/B09Z23FSXD/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Bunch of bolts and rail buts
@@LekoOffRoad This is awesome! Can you explain how you mounted the floor door guide? Not seeing it in the video.
Anyone could come and steal it.
You can use locks instead of pins, but then someone will argue that anyone can cut locks :)
@@LekoOffRoad True. Security is a big concern for me...the places I go.
@@LekoOffRoadit doesn’t matter you locked or not, someone just unscrewed the latch(the bottom part), your box would be gone immediately, no need to cut 🔒, only use a screwdriver with an suitable screw bit.