These look really good quality. Far better than anything I've seen. The fact you can put the worktop core into the top is a great idea, especially if you have spent a fortune on a decent top, the phone charging plates on most models are useless anyway! Wondering if you are looking into supplying into the UK?
You completely left out all of the wiring. I am trying to get the wire in place, in advance of the stone being installed and hoped this video would show whether there is an outlet in back if the cabinet or how it us wired and whether a coed goes up and down with the unit that requires slack. A few shots from inside the cabinet would gave made this video complete.
OK, I bought this and received it here in South Florida….I’m having a VERY hard time finding a reputable company to cut the 4” hole that needed…perfectly and without a center pilot hole. As I said, I’m NOT running into anyone to cut the hole as he has shown. I’ve been to various equipment rental location and they all do not have drill presses but they have the heavy duty core-drillers. That’s not going to work for my kitchen counter island! Any suggestions!?!?!!?!
I see that the hole size a 100mm using a diamond hole Saw however all hole saws have a slightly different outer and inner cut size. Can you please recommend which hole Saw to buy
Apparently you need a 4mm kerf. A 3.5mm is common but haven’t seen a 4mm 100mm hole saws are rare. There’s an adjustable circle cutter you can get but that puts a drill hole through the middle of the retainer portion, and only goes down 30mm
Has the unit been used and passed inspections in the US. I live in S Fl and our electrical inspectors are looking for the approval paperwork on any fixture installed. It must meet certain standards, has this product been used and accepted in S Florida? Thank you SD
It's not showing under what he did but those power points have a normal plug so you just need power under stone bench. After that you just drill hole and install. No need of stone mason guy
That is one of the nicest pop up outlets I’ve seen. I like how the cut piece from the counter top is used.
Wish these were available in the U.S.!
These look really good quality. Far better than anything I've seen. The fact you can put the worktop core into the top is a great idea, especially if you have spent a fortune on a decent top, the phone charging plates on most models are useless anyway! Wondering if you are looking into supplying into the UK?
Is this available in the U.S.?
When will this be available in U.S need this asap?
9:22 you could just fit the metal piece temporarily with masking tape on the top, easier than shimming it from the bottom.
Very neat!
You completely left out all of the wiring. I am trying to get the wire in place, in advance of the stone being installed and hoped this video would show whether there is an outlet in back if the cabinet or how it us wired and whether a coed goes up and down with the unit that requires slack. A few shots from inside the cabinet would gave made this video complete.
Should get a vacuum base for the drill press.
OK, I bought this and received it here in South Florida….I’m having a VERY hard time finding a reputable company to cut the 4” hole that needed…perfectly and without a center pilot hole. As I said, I’m NOT running into anyone to cut the hole as he has shown. I’ve been to various equipment rental location and they all do not have drill presses but they have the heavy duty core-drillers. That’s not going to work for my kitchen counter island!
Any suggestions!?!?!!?!
talk to a plumber or electrician and get them to do the hole core
17:49 ROFLMAO!!!!
Can I purchase this in the US? Thanks
I see that the hole size a 100mm using a diamond hole Saw however all hole saws have a slightly different outer and inner cut size. Can you please recommend which hole Saw to buy
Apparently you need a 4mm kerf. A 3.5mm is common but haven’t seen a 4mm 100mm hole saws are rare. There’s an adjustable circle cutter you can get but that puts a drill hole through the middle of the retainer portion, and only goes down 30mm
Is there a version for going through 40mm timber? (tasmanian oak)
Good work
Do you have any recommended installer in Sydney NSW?
Has the unit been used and passed inspections in the US. I live in S Fl and our electrical inspectors are looking for the approval paperwork on any fixture installed. It must meet certain standards, has this product been used and accepted in S Florida?
Thank you
SD
Did you ever get an answer?
It’s within 6 ft of a water source (sink), so this will not be up to code in the US. It has to be gfci protected.
You can gfci at the panel.
what will happen if water drops on all surfaces?
Is it worth some $400AU though?
He is Ian Ziering??
Where can I get it.?
Where in the USA can you purchase this. Fail 🤦🏻♂️
What about water ingress??
So you need a stone mason and an electrician?
Would have been nice to what went on under the bench as the video is unclear in this area
Agreed, there was obviously someone operating the camera!
These look amazing but $549? Hard no!
Got anyone in Darwin NT that can install?
WOW....
It's not showing under what he did but those power points have a normal plug so you just need power under stone bench. After that you just drill hole and install. No need of stone mason guy
$500 + Hard Pass!
Is this available for the US?
Is it available in Canada? I am wondering if there’s some liquid on the island it will go throw the hole, doesn’t it?