How to replace a close coupled toilet syphon | Dudley Turbo
HTML-код
- Опубликовано: 11 мар 2011
- Toilet syphons are normally reliable, but the diaphragm inside of the syphon can eventually fail. Replacing the syphon on a high level or low level toilet is much easier than on a close coupled toilet. Here we are replacing a standard toilet syphon with a Dudley Turbo 88 syphon, which is a dual flush (so it saves water) and also is in two parts so the next time you need to replace the syphon diaphragm it is much easier. You can buy the parts at your local plumbers merchants or even get them on ebay- fave.co/2p1srzg
fave.co/2olOLW6 - Хобби
The video was posted 12 years ago and I found it very useful in 2023, thank you - it was very informative.
Glad it was helpful!
Followed this tips in this video today. Got away with just replacing the piston in the syphon. Total cost £1.20. Sorted! Mine is not a close-coupled toilet, so didn't have to remove the cistern which made it easier, as mentioned in the video. A tip I picked up is that you can now buy syphons which are in two pieces which means you can repair or replace just the moving bits without disturbing the pipework or the cistern. Why they weren't all designed like this in the first place is a mystery.
Brilliant. It's a testament to the effort you put into your channel, that more than 8 years later, people like me are still finding your older videos really clear and useful. Thanks very much! 👍
You are welcome
Thanks for the comment 👍
Just found this now and still doing the same job 👍🏻. Thanks for the great video, helped me right out
I've had issues with the flush on my toilet for a while. got a plumber to come and take a look and of course it worked fine that day. After a few days of taking a few times to flush, it finally packed in altogether on the bank holiday weekend. This video was an absolute lifesaver for me. Without it I would have had to wait several days for a plumber and find someone to wait for them whilst I was at work. Having watched the video several times, I made a list f everything I might need, then went on the Bank holiday Monday to buy it all. Had a lot of difficulty getting the cistern off the wall because of rusted butterfly nuts and so had to cut them off. following the video though, everything else was fairly straightforward, even for someone like me who does as little DIY as possible. Great tip on the syphons that don't need removing in future to replace the membrane. Thank you for posting this.
You made this video in 2011, but I just want to say thanks in 2019! It's been really helpful today.
I'm glad the video helped ;-)
Thanks for the comment
Thank you from 2021
Just want to say thank you so much for this video. Today I did my first Syphon repair many many thanks for your guidance in this video. Brilliantly done video.
You are welcome
Thanks for the comment
fairba
The very best video on here for this type of repair/replacement.
Thank you for saving me a fortune having to call a plumber.
I followed your instructions to the letter using a good quality syphon - and it’s perfect now.
Thank you again👏🏻👏🏻👏🏻👏🏻👏🏻
You are welcome
Thanks for the comment 👍
I watched this video a few days before replacing the syphon, the “ home maintenance technician “ that my niece pays an insurance premium for said it was a difficult job, the cistern would probably crack and a new cistern and replacement tiling would be required!, and wouldn’t touch it
I bought a new syphon and close coupling kit for £15, the old wing nuts and bolts snapped off when I used an adjustable for leverage so I was fortunate because I don’t have a small grinder, after that everything was comparatively straight forward, many thanks for a very informative video
Well done 👍
This is such a great video, thank you! I've just changed the syphon in my toilet, followed your superb advice and completed the job with no problems or leaks. Awesome! You have a real talent in explaining and demonstrating using high quality video and sound which makes tackling plumbing jobs so much simpler and safer. Thanks again
You are welcome
Thanks for the comment
Thanks for a very helpful video !!
Was tiling the bathroom floor and decided to remove the toilet (I had ZERO plumbing experience) Your vids really got me out of a hole and even had me talking like i knew what i was doing :D
Thank you for this thorough video!! I watched it this afternoon and tonight have accomplished the task. Couldn't have done it without your help! Thank you!
Glad it helped!
My toilet stopped flushing and your video helped me both identify the problem and fix it myself with a new one from Screwfix. I needed to change only the blue part because luckily I was replacing an old Dudley Turbo 88R syphon so was able to leave the column part in place. I am female and 70 years old. Your video was instructive and reassuring. Thank you!
I'm glad the video helped
Thanks for the comment 👍
This worked great for me! I had got a few quotes from plumbers that were way too expensive; so found your video on RUclips, and decided to do it myself and saved myself a small fortune in the meantime! Cheers fella! ;)
Fabulous !! I have just repaired the toilet whilst my husbands away on business as a surprise !!
Great for you! Not many people can do that. This is a joke.....Suppose your husband is the jealous, not trusting type..he might not believe you did this,and think you might be having an affair with a plumber or someone with that skills.....LOL. Great Job keep it up.
Winston Clifford ahahahaha I thought the same ,
But fair play to fixing the toilet 😉
about 6 months ago I was shocked to get a bill from a plumber for £450 (he also had to be called back 3 times as hadnt actually sorted the problem)! I was there when he did the work and I would say in total he was at the house for about 2 hours. He tried to pass the cost off on parts but the bits listed I could by for about £30. Fast forward 6 months and toilet stops flushing.....Im not getting a plumber this time I thought! With the help of this video I managed to do it all myself for a total cost of £22. So annoying as replacing the siphon was actually more involved then the jobs I paid the rip off plumber for! Thanks so much for these videos. Really great content
I'm glad the video helped
Thanks for the comment 👍
This may be an old vid but its still helping people, just replaced a syphon in a close coupled toilet, after watching this made the job easy. Thank you
I'm glad the video helped
Thanks for the comment 👍
well explained thanks, very helpful. I was going to attempt this myself but having seen the possible problem areas I think I'll call in a plumber.
Imagine my surprise when I realised that - that toilet is EXACTLY the same as mine LOL . . . . . . But I must admit after seeing the reason you've gone for the more expensive flusher unit you've convinced me that's the one to buy this morning before I crack on !
I stumbled across this video while watching home improvement videos. In the US our toilets use a flapper with a chain hooked to the flush handle. Those syphon toilets you guys have look way better than ours. The US now requires low flow toilets, and they clog very easy. My fill valve broke in my toilet, so I bought a kit and replaced everything. The kit's overflow tube was taller than my original so I just set the fill valve higher. Now the flush is more powerful and it hasn't clogged up since.
I realise now it IS possible to remove rusted wingnuts and bolts without cracking the cistern. Two plumbers have doubted it could be done. I've never used an angle grinder before but tempted to buy (or borrow) a cordless one and repair my occasional leaking cistern. I made the mistake a number of years not using a new donut-washer when I replaced the flusher. Which later resulted in rusting bolts. Thank you so much for such a well presented video.
You are welcome
Thanks for the comment 👍
Thanks so much, I'm 15 and my dad wanted me to fix ours, this video made it pretty simple
You are welcome
Thanks for the comment
Very good, clear instructions, easy to follow. I now feel confident to fix my non flushing cistern.
I see you have one dislike, I can only assume that must be from another plumber. You know, the type of plumber that likes to draw breath through his teeth before telling you it ain't going to be cheap.
Well done, great video.
I too have a Dudley Turbo, which I fitted years ago. For some months it has been misbehaving, and the whole flush unit swung up as it flushed. I planned to replace the whole thing, and watched this video to remind myself what I did last time - and right at the end, as you reassembled it, you said "that needs to clip in at the bottom first - EUREKA! 2 minutes with hands in cold water and problem fixed! Thanks 👌
Really good video, covering all the details. As a rookie I successfully followed it step by step.
TheMxrrab
Yes, the Dudley Turbo 88 has an internal overflow. (They call it the spill over level)
You made this video in 2011 and it's a valid today (Christmas eve) as when it was made. 24/12/2016 and my toilet cistern breaks - I have a family what do I do!!
Well I watched your video. I dropped down to screw fix, who had all the bits you showed - now I have a fixed toilet for Christmas day ---- THANK YOU :)
Never would have done this if it was not for your video :)
I'm glad the video helped Ian ;-)
The first time I ever replaced a syphon was at a similar time of year (I think it was Christmas eve) in about 2005.
Thanks for the comment
It's people like Ultimate Handyman taking the time to share their knowledge and experience that keeps me coming back to RUclips to learn more and more. I'm typing this with the cistern on the floor and parts around it. Although I've done this before, I find there's always something to learn, like why not to use Silicon, and paying attention to good clean up before assembling things back together. The £18 device looks well worth the money to save the hassle and time it takes to remove the cistern, clean it all up, and install it again for the sake of a small plastic disc.
Excellent video.
1. Clarity of explanation: A
2. Accounting for the unexpected: A
3. Dealing with problems: A
4. Comprehensive instructions:A
I was all set for a long job on mine. But after watching this video I realised I had a 3 part, that just disconnects and lifts right out. Nice.
Great video.
P.S: My membrane was ripped. It is a sad fact that they don't make it easy just to replace the sheet of plastic, environmentally irresponsible.
I needed a new syphon for our toilet in our static caravan and after watching this video i was able to visit the local plumber and return with everything i needed and instal it with no problems what so ever, great video.
I'm glad the video helped ;-)
Thanks for the comment
Excellent - felt like a pro when I replaced mine, really useful. Thanks for posting this.
Very clear vid, thanks for helping us all save money pal, all the best
You are welcome
Thanks for the comment
Ultimate Handyman In your expert opinion, would this help solve having to press the handle down hard and fast every time to activate the flush? Due to weak diaphragm?
Yes, or you can remove the existing diaphragm and fit a new one. It's often better to just get a new syphon though!
Ultimate Handyman Appreciate that sir, I'll get the one in the vid
Thank you! Excellent video. I have a compact cistern so fitted the smaller Dudley 'Turbo Edge' (adjustable height, flush volume and still does dual-flush). Old one (Freeflo) had been in 16 years before diaphragm failed, so cistern had to come off the wall. Took the opportunity to fit new flush plate, doughnut and full seal kit from Ideal Standard for Quiet flow input valve.
I now shouldn't have to remove it for a very long time and replacement of Dudley Edge syphon diaphragm in future will be simple. Also fitted a quarter-turn isolation valve so I'm not fumbling for the slot with a flat screwdriver. I could now have the cistern off the wall faster than a McLaren pitstop, but I don't need to, having an easily-serviced Turbo Edge.
Many thanks also to John at Wolseley Plumbing, New York Way, North Tyneside industrial Estate.
Thanks for the comment 👍
A very in depth and clear video that made it so easy to replace the syphon... And it saved me £70 to get it repaired... Thank you so much for posting this video.
You are welcome
Thanks for the comment
Thanks for the video , i'm feeling brave enough to tackle the toilet on my own!
I'm pretty proud of the young man, the lad did a bang up job...
Thank you so much for putting 'How to replace a coupled toilet syphon Dudley Turbo' online! You have given lots of detail and the step by step instructions were brill .
Louise Cronin
You are welcome
Thanks for the comment ;-)
Coming up to Christmas 11 years on from your video and I've got exactly the same problem. 20 years worth of rust, so I took your suggestion of the angle grinder and it worked a treat. Thanks for this mate, you've saved my bacon and I owe you a pint!
I very much doubt it, but if you ever need any help with something chemistry-related, drop me a line.
Thanks Andrew, I'm glad the video helped.
I’ll bear that in mind, if I’m ever stuck with chemistry 👍
Thanks for the comment 👍
Thank you so much for that video! It told me almost everything I needed to know. I didn't know beforehand that I would need a new close-coupling kit. I certainly needed that!
The membrane on the original siphon had indeed broken. I got a £20 replacement from Screwfix and installed that. Now I have dual flush (good for me, being on a water meter) and also an internal overflow (the external overflow is still there, of course, but it won't be causing harm to my building if something happens). The new one is, like yours, far easier to replace than the old type if there is a problem in the future.
Glad the video helped
Thanks for the comment
good informative video fella.
ive actually learned something today:)
Quite simply brilliant video. I'm useless diy er but managers this in 25 mins this morning. Now I need to do a second toilet. Thanks very much, saved a fortune I reckon.
+markus mybusiness
I'm glad the video helped ;-)
You will definitely have saved some money!
Thanks for the comment
just wanted to say a massive thank you, id never even lifted the to off a cistern before but now thanks to you shes flushing like a champ
I'm glad the video helped ;-)
Thanks for the comment
your a genious!! thanks man!!
A great help, thanks for posting
You are welcome
Thanks for the comment
Very useful video - saved me from calling out a plumber! A lot of useful tips you don't get with standard instructions or DiY books - eg how to get the water out of the cistern if the toilet won't flush at all, without getting water everywhere. Realised my problem was that the doughnut washer wasn't on properly (one set of instructions told you to put it in the pan rather than on the outlet from the siphon). Once I'd pushed it fully onto the outlet pipe, no problem.
The most comprehensive and helpful video I have seen on the channel.. 2024 and still relevant. Sign of a Great tradesman!
I'm glad the video helped
Thanks for the comment 👍
Just want to say thank you, it was very useful!
You are welcome.
Thanks for the comment ;-)
This is how to make an instructional video ! Thanks !
A first class, well presented, no nonsense, accurate and straightforward video tutorial. Helped me every step of the way on a like for like replacement. And no "mate" this no "hey guys" that. No unnecessary awkward banter. One of the best I have seen. Thank you.
You're very welcome!
superb video - even 11 years after you made this video it helped me have the confidence to do replace my own syphon with minimal fuss.
you saved me a fortune for a plumber visit. all in all, £30 bucks to get a working toiley again.
Well done !
I'm glad the video helped
Thanks for the comment 👍
How do you tell what the capacity of the cistern is, 7l or 9l
When I visit my family in Australia, they have normal light switches and sockets in their bathrooms and I have not heard of any accidents, so you can grind away with a mains operated angle grinder until your hearts content in Aussie!!
Thanks for the video, it was very well explained with attention to detail
+icespeckledhens
Sometimes it says in the cistern, but if not you can measure it when emptying it with a jug etc.
They also use 230v in most of Europe and you often see light switches and sockets in bathrooms abroad, but I guess you can never be too careful as there are some really stupid people out there that might try and use the angle grinder when taking a bath LOL.
Thanks for the comment ;-)
Thanks for whoever did this film. Gave me the confidence to do it myself. Didn't go quite as smoothly as shown - but got there in the end.
Stephen Wood
You are welcome.
Often jobs don't go smoothly but you never find out until you start the job. I tried to cover most things that could go wrong.
Thanks for the comment ;-)
Thanks. Now I've earned multiple man points I intend to cash it in by having a beer.
Stephen Wood
Nice one, Enjoy ;-)
Same from me fella. Watched your video and changed the flush mechanism myself rather than paying a plumber! Probably saved £30! Ideal. Thanks.
I'm glad the video helped
Thanks for the comment 👍
Cheers Mate. I have just successfully changed the syphon in my loo, and after a couple of attempts at getting the tightness correct underneath the syphon. All is working perfectly. Thanks Again. You saved me money. Total Cost was 19 euros, and an hour and 15 minutes of my time.
Mate, you not only saved my life with this video, you saved me a few quid too. Result! Thanks!
Glad it helped
Thanks for the comment
I've been putting this syphon replacement, off, on our close coupled toilet for ages due to the thought of it being complicated and there's water involved! But after watching your video, it was a breeze! I did have to have 2 goes at it because I had a very slight leak on the first go but i put a little bit of silicone under the syphon seal second time round and no leaks! Thank you for taking the time to share your knowledge 👊
Well done for having a go yourself 👍
Uploaded 10years ago, still amazingly helpful. Thank you buddy.
I'm glad the video helped
Thanks for the comment 👍
Thanks. I had done this job once before in another toilet and had to get a plumber in eventually as I couldn't t stop the inlet from leaking. This time I bought a Dudley Duo, on the advice of the helpful plumbers merchants (before viewing this clip) and managed to fit it perfectly this time with confidence after watching this very helpful demonstration. I even refitted the rusty close coupling kit I had removed as I hadn't bought one to replace it, though I did use LS-X jointing compound just to be on the safe side.
I'm glad you sorted it ;-)
Thanks for the comment
i live in the U.S. and watch your videos mainly for entertainment even though most of what you post will probably not help me much here but I have gotten a lot of great tips from you. I never thought just how different american toilets can be from U.K. toilets. Our toilets have not changed much in a long time, nearly all of the guts in american toilets are universal, only thing that could be different would be the size of the flapper, which is what releases all the water into the bowl, but even then there are only two sizes and its easy to tell them apart. There are a couple of different styles of toilets but most (as in about 90 percent) are the same, white porcelain, with a 2 or 3 inch flapper (3 inch being post 2005 and 2 being pre 2005) and a single fill valve. Great videos though!
Thanks, I knew that they used flapper valves in the US, but have never seen one close up.
Thanks for the comment ;-)
Thanks fella. I am essentially useless at DIY and with this video I have just replaced the Siphon in about 45 mins - only took that long cos I kept coming back to your video to check stuff. Absolutely spot on. Cheers.
I'm glad the video helped ;-)
Thanks for the comment
11 years later and this is the exact information needed. Thankyou. Guess which toilet system we have? Yes, the hardest one. Time to break out the tools.
👍
Brilliant thanks. Just successfully done mine following your advice to the letter. My loo must be 30 plus years old. Old looks and works great now. Phew!
Well done ;-)
Thanks for the comment
Hiya pal!
Toilet wouldn't flush properly for a few days now. I watched this video last night and today i've carried out the repair.
The membrane had gone- got a replacement and then put it all back together without a problem. I didn't need a coupling kit and the syphon was ok to re-use!
£7.20 + vat for membrane, silicone and silicone gun.
Many thanks! Top Man! :-))
Guy, this video is top notch. I took our old toilet apart and replaced the syphon in no time at all.
I'm glad the video helped
Thanks for the comment 👍
Excellent video. Perfectly explained. Amazing that this video is 12 years old and my brand new toilet is installed in exactly the same way. Funny how some things don’t change. Your instructions helped me a lot. Thanks again 👌😎
Great to hear!
I can't afford a plumber but i could fix this problem thanks to your great video. I have just changed syphon and inlet valve. My wing nut screws were SO rusty, 24hrs with penetrating oil on and they just fell to into little rust flakes. At first i could not move them at all! Thank you again.
I'm glad the video helped ;-)
Thanks for the comment
I'm not a plumber but as another handyman (a few miles north of you) I've done loads of these but am using drop valves nowadays rather than syphons (Fluidmaster Pro seems to be one of the best). I love this demo because it shows all of the common snags. My usual disaster is that when I flush a toilet for the first time the doughnut washer is too small to make a proper seal and the water pi**es out all over the floor. Everything has to come back out again and we're back to square two. Deep joy!
Fluid master seem to make some decent stuff.
Jobs like this can be a real nightmare, as there are so many things that can go wrong!
Thanks for the comment 👍
Watched this on Friday night, purchased a new siphon & coupling kiting Saturday, stripped and repaired our toilet.
Brilliant video, easy to follow, perfectly explained. I feel like a DIY God now 😄
+John Bourke
Brilliant ;-)
Well done John!
I'm always happy when people can follow my videos ;-)
OMG!! I have just returned from B&Q with a new syphon and have taken the old one out and replaced it.!! also added a push button and removed the handle so is now a dual flush.
I would not have dreamed of doing this until i saw your video, so i definitely owe you a beer, or have two and use my loo ... great
Hiya mate, excellent video, well done! Had no experience taking apart a cistern and viewed this twice before buying the parts and tackling the job. Stupid loo was 20+ years old & had a "siphon bomb" system, so even with a new siphon it just filled the bowl and wouldn't flush, even after taking it apart 10 times! Gave up, bought a complete new toilet after finding out siphon bombs stopped being made 15 years ago! Couldn't have tackled it without you though, thank you very much!
Excellent video: clear tuition and very good camera angles.
Glad you liked it!
Top man for putting this video up. I'd done three quarters of the job but got stuck on which way up to fit the doughnut washer before I found this video. Good advice telling people to buy a replacement close coupling kit as well. If I'd found this video before, I would have saved myself another trip to the diy store.
My downstais toilet is now working after 6 months ! Thanks very much !
Thank you for saving me the cost of a plumber ! I have now successfully fitted a Dudley 88 in place of the cheap piece of kit fitted by the builders 12 years ago. Frankly I'm surprised the diaphragm lasted that long, but I'm not surprised the builders didn't fit a descent syphon in the first place. Thanks for an excellent and very helpful step-by-step approach .....fortunately I didn't have to angle-grind the bolts off, but I did take your advice to fit a new coupling kit as well to be on the safe side. Thanks again.
You are welcome
Thanks for the comment ;-)
I couldn’t leave RUclips without complimenting your video. Very thorough and meticulous step by step instructions. I actually came here looking for guidance on how to change inlet flow system but ended up watching how to change syphon system and watched your video till the end as it was not only entertaining but educational too. Thanks for taking your time to make a such a great tutorial video. You now have another subscriber. Cheers!
I’m glad you like the video
Thanks for the comment 👍
Fantastic video, many thanks. Saved myself a few bob which is handy as I'm expecting the arrival of my first baby in 4 weeks time!
Nothing in my house is easy.
I’d have been absolutely flummoxed if it hadn’t been for your so detailed video.
I’m gonna tackle this now and hopefully save some cash that I really don’t have.
Thank you so much for this help. You’re an absolute star ⭐️.
✅👊👍
You are welcome
I wish you the best of luck with it ;-)
Thanks for the comment 👍
Ultimate Handyman 😃🤣 Thank you. Keep up the great work. 👍👍
Ultimate Handyman. All fixed and a huge thanks to you. Awesome ⭐️⭐️⭐️⭐️⭐️ channel.
Ultimate Handyman, I wish I had been your apprentice. Very clear tutorial. This is real reality TV.
Thanks Barry ;-)
Very detailed with simple easy to follow instructions. I watched it twice and replace with Dudley turbo height adjustable system from B&Q for £23.00, coupling kit was £3.97 and a new washer instead of using the old one which cost £2.04. Total cost was £29.01 exactly and 2 and half hours of time. I had to cut the bolts off from old one as well and good cleaning took time. Just to say thank you for the video and could not have done without it since I didn't have a clue about this before.
+Asoka Balage I'm glad the video helpled.Thanks for the comment
By chance I ordered the same newer unit.. your video helped a lot.. thankyou from 9 years into the future!!
I'm glad the video helped ;-)
Thanks for the comment
Very good explanation for the steps required to replace a valve on close coupled toilet, excellent advice on parts and sourcing.
Glad it helped
Good Work Fella! Just done it myself for £15 including vat. Saving me calling out a plumber! Thank god for you tube and handymen all over!
Thanks my man! I've been messing with my toilet for days... but now I'm almost done! The water inlet's hissing and leaking now, the old parts weren't Dudley Turbo parts! And whoever installed it all previously was a full rhinestone cowboy!
You are welcome.
Thanks for the comment
Amazing video tutorial... you sir are a star! Plumber wanted £120 to replace our syphon... I followed your video steps and done it myself without any problems (thank god).. Cannot thank you enough for your efforts in producing this video...
Glad it helped ;-)
Thanks for the comment
You won't find a better video online to tackle this job! Another great DIY lesson from the Ultimate Handyman!
Thanks for the comment ;-)
Just installed one of these without any fuss. Thanks to this 'how to' video I've saved myself the expense of getting a plumber in to do this. A great video
Michael Oliver
Thanks for the comment ;-)
Tackled this job once before, but this is a great refresher. Off to the shops and confident I'll get all that I need in one trip for a change!
Glad it was helpful!
Thank you for this video. Without watching this I would have taken and replaced the cistern until infinity! Instead of just 5 times! I watched this between the 4th and 5th time and realised I didn't have a rubber seal between the cistern and metal plate. No more leaks. Thanks!
Thank you, my dads a hero for fixing our loo. thanks to you. no more bucket beside the toilet. :)
You are welcome
Thanks for the comment
Did it, very easy change - no penetrant needed just a bloody big pair of pliers !! Did it right and even put a new close coupling kit.
A very good, clear video.
Tip 1: If you live in a hard water area, as I do, you may find it difficult to undo the old siphon's nut due to limescale build-up. A squirt of limescale remover, leave for a few minutes then wash off with water, will make the removal much easier. Try not to get any one your hands as it will sting. Wash off immediately if you do.
Tip 2: Draw a guide line around the existing metal plate of the couple kit before removal to make aligning the replacement correctly a simpler job. It may not be the exact shape of the new one, but it gives a clear guide to ensure it's on square.
Thanks for the tips ;-)
Thank you so much for making this video. I have just successfully replaced the syphon on my own close-coupled cistern by following your guidance. You’re a hero!
You are welcome
Thanks for the comment 👍
Changed our faulty syphon today after seeing your tutorial. Perfect instruction. I was that confident i even changed the bottom fed inlet after i stripped the thread!!!!
Thanks for putting this up, very grateful.
Thank you so much for taking the time to upload this video, I've just replaced a broken diaphragm with the one in this video. I followed the instructions as directed and I'm delighted to say everything went well. Anyone watching this should know that if I can do this diy job successfully, then anyone can. Just follow what this guys instructs.
Many many thanks.
I'm glad the video helped Matt.
Thanks for the comment ;-)
Absolutely cracking video.
All the potential snags you mentioned showed up on mine toilet.
Really really useful and so clear.
The o-ring on my overflow pipe had gone too but only realised after refitting late on a Sunday.
Thank you.
I'm glad the video helped
Thanks for the comment 👍
me and my son just fitted a new dudley system after watching this video, i am not a DIY person at all and this was a great help. we followed your instructions and got it done. a big thankyou for the video, saved a fortune on plumber bills.
+Peter Osborne
I'm glad the video helped ;-)
Thanks for the comment
Hi there. Many thanks for taking the time and effort to make and share this video. I've managed to fix our toilet without a plumber and was well prepared for the task before I started. The builder of our house left us with a legacy of shoddy plumbing work and through learning how to put right the wrongs myself I've managed to save some money and gain new skills.
You are welcome
Thanks for the comment ;-)
I have successfully completed this upgrade thanks to your excellent video. Cheers.
Well done ;-)
Hi, I am SO pleased that when you decided to make this video, you made it from a realistic perspective not using a brand new toilet in a fake scenario. I had the same issue with the wing nuts and had to reach for the angle grinder. Thanks very much for this, I really appreciate your efforts.
Glad it was helpful!
Thanks for the comment
@@ultimatehandyman Job is done, no leaks, no mess (well, not enough to make the wife kick off) and no expensive plumbers bill. I definitely owe you a [virtual] beer or two :)
Many thanks for giving me the confidence to tackle this job with your down to earth, clear and detailed instructions! 👍😃
Thank you so much for this instruction video. I have just replaced a broken syphon with the Dudley 88 on my closed coupled toilet. Worked a treat. One thing I did do, before I removed the metal bracket on the underside of the water tank, I used a Sharpie to mark the outline of the old bracket, so made positioning the replacement easier. I did measure the position as well, just to be sure. Again, thank you so much for this instruction video.
Thanks for the comment 👍
The best and realistic. Most videos tend to deal with brand new fittings which most of us don't have. I especially liked the fact that he advised of unexpected errors in that after ten years you shouldn't expect things to undo easily. Thank you. Figured you saved me £150 or more.
It was good to see a genuine repair job, complete with the problems of dealing with rusted nuts and showing the accumulated grime. It made a pleasant change from seeing people easily disassembling shiny, brand new kit.
I'm certain that without your video, I would have taken much longer, spent a good deal more and ended up either injuring myself or breaking some porcelain.
Cheers.