Ok guys.... Some off you already sended me some pictures of your print(er)s.... Love to see them so feel free to send them to my e-mail.... I might do a video on them!
I have a few problems concerning your build. First is your screws of your bed. They are hanging loose in the frame? So the bed can wobble? They have to be tight on the spring tension so the bed can not wobble. Then there is the problem with feedrate. Change your extruder to one that has a better tension to filament. When you speed up the speed and get bad extrusion means your extruder can not handle the amount it needs. ( and maybe upscale hotend temp) Retraction is a good start to dial it in the right way. When i was building my hypercube i was sure to keep the bed tight, the retraction dialed in right and a good extrusion. Mine works like a charme. No blobs or strings or elephantfoot or under extrusion. Sometimes even better then my Ender 3. So keep up the good work and hopefully the next time a video with some major approvements.
CIAO COMPLIMENTI PER IL VIDEO ANCHE CONOSCO POCO INGLESE VOLEVO CHIEDERTI IO STO COSTRUENDO UNA COREXY STAMPANTE MA NON RIESCO A TROVARE PARTI PER ASSE Z DA STAMPARE PUOI AIUTARMI GRAZIE
Ok guys.... Some off you already sended me some pictures of your print(er)s.... Love to see them so feel free to send them to my e-mail.... I might do a video on them!
I have a few problems concerning your build. First is your screws of your bed. They are hanging loose in the frame? So the bed can wobble? They have to be tight on the spring tension so the bed can not wobble.
Then there is the problem with feedrate. Change your extruder to one that has a better tension to filament. When you speed up the speed and get bad extrusion means your extruder can not handle the amount it needs. ( and maybe upscale hotend temp)
Retraction is a good start to dial it in the right way.
When i was building my hypercube i was sure to keep the bed tight, the retraction dialed in right and a good extrusion.
Mine works like a charme. No blobs or strings or elephantfoot or under extrusion. Sometimes even better then my Ender 3.
So keep up the good work and hopefully the next time a video with some major approvements.
I requested some samples of the iGus filament and printed my own iGus Drylin bearings for free!
That's a must have upgrade! These metal bearing sucks
I noticed.... Difference is bigger then i expected! 😮
First 💯💪...awesome bro..I'm so consumed with 3d printing....Halloween has been very profitable making masks 👍
Send me some pictures of the masks! Love to see them
@@pietershomeprojects4537 send pictures where?
@@individualone to my email... pietershomeprojects@gmail.com 😉
looks like you still have a bent/damaged lead screw
I noticed this too.... But wait how dus you noticed it 😲.... The right one is always complaining....(making noise.... And even blocks on fast moves)
@@pietershomeprojects4537 your test blocks had a skips in the same spot
@@jakobfindlay4136 you mean on the bottom there?
@@pietershomeprojects4537 5:15 shows it the best you can see layer shifts in the same z plane where the first test cube has larger blemishes
Hopefully it's just dirt or dust stuck to the lead screw
can you link that 40mm to thingi adapter?
I'm sorry, i just found your reaction now... if you didn't found it already here it is: www.thingiverse.com/thing:2037140
CIAO COMPLIMENTI PER IL VIDEO ANCHE CONOSCO POCO INGLESE VOLEVO CHIEDERTI IO STO COSTRUENDO UNA COREXY STAMPANTE MA NON RIESCO A TROVARE PARTI PER ASSE Z DA STAMPARE PUOI AIUTARMI GRAZIE
Thanks, i'll make a list for you!
PER ENDESTOP MECCANICO NON OTTICO